Age | Commit message (Collapse) | Author |
|
Perhaps unsurprisingly there are some platforms where the GTDT isn't
quite right and the Platforms Timer array overflows the length of the
overall table.
While the recently-added sanity checking isn't wrong, it makes it
impossible to boot the kernel on offending platforms. Try to hobble
along and limit the Platform Timer count to the bounds of the table.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Zheng Zengkai <zhengzengkai@huawei.com>
Cc: stable@vger.kernel.org
Fixes: 263e22d6bd1f ("ACPI: GTDT: Tighten the check for the array of platform timer structures")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20250128001749.3132656-1-oliver.upton@linux.dev
Signed-off-by: Will Deacon <will@kernel.org>
|
|
DEFINE_RES_IRQ returns struct resource type, so it is
unnecessary to cast it to struct resource.
Remove the unnecessary cast to fix the following sparse warnings:
drivers/acpi/arm64/gtdt.c:355:19: sparse: warning: cast to non-scalar
drivers/acpi/arm64/gtdt.c:355:19: sparse: warning: cast from non-scalar
No functional changes intended.
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240917233827.73167-1-minhuadotchen@gmail.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In case of error in gtdt_parse_timer_block() invalid 'gtdt_frame'
will be used in 'do {} while (i-- >= 0 && gtdt_frame--);' statement block
because do{} block will be executed even if 'i == 0'.
Adjust error handling procedure by replacing 'i-- >= 0' with 'i-- > 0'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a712c3ed9b8a ("acpi/arm64: Add memory-mapped timer support in GTDT driver")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://lore.kernel.org/r/20240827101239.22020-1-amishin@t-argos.ru
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
As suggested by Marc and Lorenzo, first we need to check whether the
platform_timer entry pointer is within gtdt bounds (< gtdt_end) before
de-referencing what it points at to detect the length of the platform
timer struct and then check that the length of current platform_timer
struct is also valid, i.e. the length is not zero and within gtdt_end.
Now next_platform_timer() only checks against gtdt_end for the entry of
subsequent platform timer without checking the length of it and will
not report error if the check failed and the existing check in function
acpi_gtdt_init() is also not enough.
Modify the for_each_platform_timer() iterator and use it combined with
a dedicated check function platform_timer_valid() to do the check
against table length (gtdt_end) for each element of platform timer
array in function acpi_gtdt_init(), making sure that both their entry
and length actually fit in the table.
Suggested-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Co-developed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20241016095458.34126-1-zhengzengkai@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Fix modpost Section mismatch error in next_platform_timer().
[...]
WARNING: modpost: vmlinux.o(.text.unlikely+0x26e60): Section mismatch in reference from the function next_platform_timer() to the variable .init.data:acpi_gtdt_desc
The function next_platform_timer() references
the variable __initdata acpi_gtdt_desc.
This is often because next_platform_timer lacks a __initdata
annotation or the annotation of acpi_gtdt_desc is wrong.
WARNING: modpost: vmlinux.o(.text.unlikely+0x26e64): Section mismatch in reference from the function next_platform_timer() to the variable .init.data:acpi_gtdt_desc
The function next_platform_timer() references
the variable __initdata acpi_gtdt_desc.
This is often because next_platform_timer lacks a __initdata
annotation or the annotation of acpi_gtdt_desc is wrong.
ERROR: modpost: Section mismatches detected.
Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them.
make[1]: *** [scripts/Makefile.modpost:59: vmlinux.symvers] Error 1
make[1]: *** Deleting file 'vmlinux.symvers'
make: *** [Makefile:1176: vmlinux] Error 2
[...]
Fixes: a712c3ed9b8a ("acpi/arm64: Add memory-mapped timer support in GTDT driver")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20210823092526.2407526-1-liu.yun@linux.dev
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When failing the driver probe because of invalid firmware properties,
the GTDT driver unmaps the interrupt that it mapped earlier.
However, it never checks whether the mapping of the interrupt actially
succeeded. Even more, should the firmware report an illegal interrupt
number that overlaps with the GIC SGI range, this can result in an
IPI being unmapped, and subsequent fireworks (as reported by Dann
Frazier).
Rework the driver to have a slightly saner behaviour and actually
check whether the interrupt has been mapped before unmapping things.
Reported-by: dann frazier <dann.frazier@canonical.com>
Fixes: ca9ae5ec4ef0 ("acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/YH87dtTfwYgavusz@xps13.dannf
Cc: <stable@vger.kernel.org>
Cc: Fu Wei <wefu@redhat.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20210421164317.1718831-2-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The mapped GTDT table needs to be released after
the driver init.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/1588910753-18543-1-git-send-email-guohanjun@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pr_err() messages should terminated with a new-line to avoid
other messages being concatenated onto the end.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
|
|
This driver adds support for parsing SBSA Generic Watchdog timer
in GTDT, parse all info in SBSA Generic Watchdog Structure in GTDT,
and creating a platform device with that information.
This allows the operating system to obtain device data from the
resource of platform device. The platform device named "sbsa-gwdt"
can be used by the ARM SBSA Generic Watchdog driver.
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
|
|
On platforms booting with ACPI, architected memory-mapped timers'
configuration data is provided by firmware through the ACPI GTDT
static table.
The clocksource architected timer kernel driver requires a firmware
interface to collect timer configuration and configure its driver.
this infrastructure is present for device tree systems, but it is
missing on systems booting with ACPI.
Implement the kernel infrastructure required to parse the static
ACPI GTDT table so that the architected timer clocksource driver can
make use of it on systems booting with ACPI, therefore enabling
the corresponding timers configuration.
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
[Mark: restructure error handling]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
|
|
This patch adds support for parsing arch timer info in GTDT,
provides some kernel APIs to parse all the PPIs and
always-on info in GTDT and export them.
By this driver, we can simplify arm_arch_timer drivers, and
separate the ACPI GTDT knowledge from it.
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
|