| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Allow hash drivers without fallbacks (e.g., hardware key)
Algorithms:
- Add hmac hardware key support (phmac) on s390
- Re-enable sha384 in FIPS mode
- Disable sha1 in FIPS mode
- Convert zstd to acomp
Drivers:
- Lower priority of qat skcipher and aead
- Convert aspeed to partial block API
- Add iMX8QXP support in caam
- Add rate limiting support for GEN6 devices in qat
- Enable telemetry for GEN6 devices in qat
- Implement full backlog mode for hisilicon/sec2"
* tag 'v6.17-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
crypto: keembay - Use min() to simplify ocs_create_linked_list_from_sg()
crypto: hisilicon/hpre - fix dma unmap sequence
crypto: qat - make adf_dev_autoreset() static
crypto: ccp - reduce stack usage in ccp_run_aes_gcm_cmd
crypto: qat - refactor ring-related debug functions
crypto: qat - fix seq_file position update in adf_ring_next()
crypto: qat - fix DMA direction for compression on GEN2 devices
crypto: jitter - replace ARRAY_SIZE definition with header include
crypto: engine - remove {prepare,unprepare}_crypt_hardware callbacks
crypto: engine - remove request batching support
crypto: qat - flush misc workqueue during device shutdown
crypto: qat - enable rate limiting feature for GEN6 devices
crypto: qat - add compression slice count for rate limiting
crypto: qat - add get_svc_slice_cnt() in device data structure
crypto: qat - add adf_rl_get_num_svc_aes() in rate limiting
crypto: qat - relocate service related functions
crypto: qat - consolidate service enums
crypto: qat - add decompression service for rate limiting
crypto: qat - validate service in rate limiting sysfs api
crypto: hisilicon/sec2 - implement full backlog mode for sec
...
|
|
Make the hash walk functions
crypto_hash_walk_done()
crypto_hash_walk_first()
crypto_hash_walk_last()
public again.
These functions had been removed from the header file
include/crypto/internal/hash.h with commit 7fa481734016
("crypto: ahash - make hash walk functions private to ahash.c")
as there was no crypto algorithm code using them.
With the upcoming crypto implementation for s390 phmac
these functions will be exploited and thus need to be
public within the kernel again.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Ensure that drivers that have not been converted to the ahash API
do not use the ahash_request_set_virt fallback path as they cannot
use the software fallback.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 9d7a0ab1c753 ("crypto: ahash - Handle partial blocks in API")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Invoke the final function directly in the default finup implementation
since crypto_ahash_final is now just a wrapper around finup.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 9d7a0ab1c753 ("crypto: ahash - Handle partial blocks in API")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Some drivers cannot have a fallback, e.g., because the key is held
in hardware. Allow these to be used with ahash by adding the bit
CRYPTO_ALG_NO_FALLBACK.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Harald Freudenberger <freude@linux.ibm.com>
|
|
Add ahash support to hmac so that drivers that can't do hmac in
hardware do not have to implement duplicate copies of hmac.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Make reqsize static for shash algorithms.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Provide an option to handle the partial blocks in the ahash API.
Almost every hash algorithm has a block size and are only able
to hash partial blocks on finalisation.
As a first step disable virtual address support for algorithms
with state sizes larger than HASH_MAX_STATESIZE. This is OK as
virtual addresses are currently only used on synchronous fallbacks.
This means ahash_do_req_chain only needs to handle synchronous
fallbacks, removing the complexities of saving the request state.
Also move the saved request state into the ahash_request object
as nesting is no longer possible.
Add a scatterlist to ahash_request to store the partial block.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add export_core and import_core hooks. These are intended to be
used by algorithms which are wrappers around block-only algorithms,
but are not themselves block-only, e.g., hmac.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add crypto_ahash_export_core and crypto_ahash_import_core. For
now they only differ from the normal export/import functions when
going through shash.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As sync ahash algorithms (currently there are none) are used without
a fallback, ensure that they obey the MAX_SYNC_HASH_REQSIZE rule
just like shash algorithms.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As chaining has been removed, all that remains of REQ_CHAIN is
just virtual address support. Rename it before the reintroduction
of batching creates confusion.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Do not copy the exit function in crypto_clone_tfm as it should
only be set after init_tfm or clone_tfm has succeeded.
Move the setting into crypto_clone_ahash and crypto_clone_shash
instead.
Also clone the fb if necessary.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a helper to clone crypto requests and eliminate code duplication.
Use kmemdup in the helper.
Also add an fb field to crypto_tfm.
This also happens to fix the existing implementations which were
buggy.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504230118.1CxUaUoX-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504230004.c7mrY0C6-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Allow any ahash to be used with a stack request, with optional
dynamic allocation when async is needed. The intended usage is:
HASH_REQUEST_ON_STACK(req, tfm);
...
err = crypto_ahash_digest(req);
/* The request cannot complete synchronously. */
if (err == -EAGAIN) {
/* This will not fail. */
req = HASH_REQUEST_CLONE(req, gfp);
/* Redo operation. */
err = crypto_ahash_digest(req);
}
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
If the bit CRYPTO_ALG_DUP_FIRST is set, an algorithm will be
duplicated by kmemdup before registration. This is inteded for
hardware-based algorithms that may be unplugged at will.
Do not use this if the algorithm data structure is embedded in a
bigger data structure. Perform the duplication in the driver
instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the common reqsize field and remove reqsize from ahash_alg.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Request chaining requires the user to do too much book keeping.
Remove it from ahash.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Disable hash request chaining in case a driver that copies an
ahash_request object by hand accidentally triggers chaining.
Reported-by: Manorit Chawdhry <m-chawdhry@ti.com>
Fixes: f2ffe5a9183d ("crypto: hash - Add request chaining API")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The synchronous ahash fallback code paths are broken because the
ahash_restore_req assumes there is always a state object. Fix this
by removing the state from ahash_restore_req and localising it to
the asynchronous completion callback.
Also add a missing synchronous finish call in ahash_def_digest_finish.
Fixes: f2ffe5a9183d ("crypto: hash - Add request chaining API")
Fixes: 439963cdc3aa ("crypto: ahash - Add virtual address support")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use nth_page instead of adding n to the page pointer.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The test on PAGE_SIZE - offset in shash_ahash_digest can underflow,
leading to execution of the fast path even if the data cannot be
mapped into a single page.
Fix this by splitting the test into four cases:
1) nbytes > sg->length: More than one SG entry, slow path.
2) !IS_ENABLED(CONFIG_HIGHMEM): fast path.
3) nbytes > (unsigned int)PAGE_SIZE - offset: Two highmem pages, slow path.
4) Highmem fast path.
Fixes: 5f7082ed4f48 ("crypto: hash - Export shash through hash")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a reqsize field to struct ahash_alg and use it to set the
default reqsize so that algorithms with a static reqsize are
not forced to create an init_tfm function.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds virtual address support to ahash. Virtual addresses
were previously only supported through shash. The user may choose
to use virtual addresses with ahash by calling ahash_request_set_virt
instead of ahash_request_set_crypt.
The API will take care of translating this to an SG list if necessary,
unless the algorithm declares that it supports chaining. Therefore
in order for an ahash algorithm to support chaining, it must also
support virtual addresses directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This adds request chaining to the ahash interface. Request chaining
allows multiple requests to be submitted in one shot. An algorithm
can elect to receive chained requests by setting the flag
CRYPTO_ALG_REQ_CHAIN. If this bit is not set, the API will break
up chained requests and submit them one-by-one.
A new err field is added to struct crypto_async_request to record
the return value for each individual request.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As unaligned operations are supported by the underlying algorithm,
ahash_save_req and ahash_restore_req can be greatly simplified to
only preserve the callback and data.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove hard-coded strings by using the str_yes_no() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Due to the removal of the Niagara2 SPU driver, crypto_hash_walk_first(),
crypto_hash_walk_done(), crypto_hash_walk_last(), and struct
crypto_hash_walk are now only used in crypto/ahash.c. Therefore, make
them all private to crypto/ahash.c. I.e. un-export the two functions
that were exported, make the functions static, and move the struct
definition to the .c file. As part of this, move the functions to
earlier in the file to avoid needing to add forward declarations.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove support for the "Crypto usage statistics" feature
(CONFIG_CRYPTO_STATS). This feature does not appear to have ever been
used, and it is harmful because it significantly reduces performance and
is a large maintenance burden.
Covering each of these points in detail:
1. Feature is not being used
Since these generic crypto statistics are only readable using netlink,
it's fairly straightforward to look for programs that use them. I'm
unable to find any evidence that any such programs exist. For example,
Debian Code Search returns no hits except the kernel header and kernel
code itself and translations of the kernel header:
https://codesearch.debian.net/search?q=CRYPTOCFGA_STAT&literal=1&perpkg=1
The patch series that added this feature in 2018
(https://lore.kernel.org/linux-crypto/1537351855-16618-1-git-send-email-clabbe@baylibre.com/)
said "The goal is to have an ifconfig for crypto device." This doesn't
appear to have happened.
It's not clear that there is real demand for crypto statistics. Just
because the kernel provides other types of statistics such as I/O and
networking statistics and some people find those useful does not mean
that crypto statistics are useful too.
Further evidence that programs are not using CONFIG_CRYPTO_STATS is that
it was able to be disabled in RHEL and Fedora as a bug fix
(https://gitlab.com/redhat/centos-stream/src/kernel/centos-stream-9/-/merge_requests/2947).
Even further evidence comes from the fact that there are and have been
bugs in how the stats work, but they were never reported. For example,
before Linux v6.7 hash stats were double-counted in most cases.
There has also never been any documentation for this feature, so it
might be hard to use even if someone wanted to.
2. CONFIG_CRYPTO_STATS significantly reduces performance
Enabling CONFIG_CRYPTO_STATS significantly reduces the performance of
the crypto API, even if no program ever retrieves the statistics. This
primarily affects systems with a large number of CPUs. For example,
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2039576 reported
that Lustre client encryption performance improved from 21.7GB/s to
48.2GB/s by disabling CONFIG_CRYPTO_STATS.
It can be argued that this means that CONFIG_CRYPTO_STATS should be
optimized with per-cpu counters similar to many of the networking
counters. But no one has done this in 5+ years. This is consistent
with the fact that the feature appears to be unused, so there seems to
be little interest in improving it as opposed to just disabling it.
It can be argued that because CONFIG_CRYPTO_STATS is off by default,
performance doesn't matter. But Linux distros tend to error on the side
of enabling options. The option is enabled in Ubuntu and Arch Linux,
and until recently was enabled in RHEL and Fedora (see above). So, even
just having the option available is harmful to users.
3. CONFIG_CRYPTO_STATS is a large maintenance burden
There are over 1000 lines of code associated with CONFIG_CRYPTO_STATS,
spread among 32 files. It significantly complicates much of the
implementation of the crypto API. After the initial submission, many
fixes and refactorings have consumed effort of multiple people to keep
this feature "working". We should be spending this effort elsewhere.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This reverts commit 2beb81fbf0c01a62515a1bcef326168494ee2bd0.
While removing CONFIG_CRYPTO_STATS is a worthy goal, this also
removed unrelated infrastructure such as crypto_comp_alg_common.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove support for the "Crypto usage statistics" feature
(CONFIG_CRYPTO_STATS). This feature does not appear to have ever been
used, and it is harmful because it significantly reduces performance and
is a large maintenance burden.
Covering each of these points in detail:
1. Feature is not being used
Since these generic crypto statistics are only readable using netlink,
it's fairly straightforward to look for programs that use them. I'm
unable to find any evidence that any such programs exist. For example,
Debian Code Search returns no hits except the kernel header and kernel
code itself and translations of the kernel header:
https://codesearch.debian.net/search?q=CRYPTOCFGA_STAT&literal=1&perpkg=1
The patch series that added this feature in 2018
(https://lore.kernel.org/linux-crypto/1537351855-16618-1-git-send-email-clabbe@baylibre.com/)
said "The goal is to have an ifconfig for crypto device." This doesn't
appear to have happened.
It's not clear that there is real demand for crypto statistics. Just
because the kernel provides other types of statistics such as I/O and
networking statistics and some people find those useful does not mean
that crypto statistics are useful too.
Further evidence that programs are not using CONFIG_CRYPTO_STATS is that
it was able to be disabled in RHEL and Fedora as a bug fix
(https://gitlab.com/redhat/centos-stream/src/kernel/centos-stream-9/-/merge_requests/2947).
Even further evidence comes from the fact that there are and have been
bugs in how the stats work, but they were never reported. For example,
before Linux v6.7 hash stats were double-counted in most cases.
There has also never been any documentation for this feature, so it
might be hard to use even if someone wanted to.
2. CONFIG_CRYPTO_STATS significantly reduces performance
Enabling CONFIG_CRYPTO_STATS significantly reduces the performance of
the crypto API, even if no program ever retrieves the statistics. This
primarily affects systems with large number of CPUs. For example,
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2039576 reported
that Lustre client encryption performance improved from 21.7GB/s to
48.2GB/s by disabling CONFIG_CRYPTO_STATS.
It can be argued that this means that CONFIG_CRYPTO_STATS should be
optimized with per-cpu counters similar to many of the networking
counters. But no one has done this in 5+ years. This is consistent
with the fact that the feature appears to be unused, so there seems to
be little interest in improving it as opposed to just disabling it.
It can be argued that because CONFIG_CRYPTO_STATS is off by default,
performance doesn't matter. But Linux distros tend to error on the side
of enabling options. The option is enabled in Ubuntu and Arch Linux,
and until recently was enabled in RHEL and Fedora (see above). So, even
just having the option available is harmful to users.
3. CONFIG_CRYPTO_STATS is a large maintenance burden
There are over 1000 lines of code associated with CONFIG_CRYPTO_STATS,
spread among 32 files. It significantly complicates much of the
implementation of the crypto API. After the initial submission, many
fixes and refactorings have consumed effort of multiple people to keep
this feature "working". We should be spending this effort elsewhere.
Cc: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since crypto_hash_alg_has_setkey() is only called from ahash.c itself,
make it a static function.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The cloned child of ahash that uses shash under the hood should use
shash helpers (like crypto_shash_setkey()).
The following panic may be observed on TCP-AO selftests:
> ==================================================================
> BUG: KASAN: wild-memory-access in crypto_mod_get+0x1b/0x60
> Write of size 4 at addr 5d5be0ff5c415e14 by task connect_ipv4/1397
>
> CPU: 0 PID: 1397 Comm: connect_ipv4 Tainted: G W 6.6.0+ #47
> Call Trace:
> <TASK>
> dump_stack_lvl+0x46/0x70
> kasan_report+0xc3/0xf0
> kasan_check_range+0xec/0x190
> crypto_mod_get+0x1b/0x60
> crypto_spawn_alg+0x53/0x140
> crypto_spawn_tfm2+0x13/0x60
> hmac_init_tfm+0x25/0x60
> crypto_ahash_setkey+0x8b/0x100
> tcp_ao_add_cmd+0xe7a/0x1120
> do_tcp_setsockopt+0x5ed/0x12a0
> do_sock_setsockopt+0x82/0x100
> __sys_setsockopt+0xe9/0x160
> __x64_sys_setsockopt+0x60/0x70
> do_syscall_64+0x3c/0xe0
> entry_SYSCALL_64_after_hwframe+0x46/0x4e
> ==================================================================
> general protection fault, probably for non-canonical address 0x5d5be0ff5c415e14: 0000 [#1] PREEMPT SMP KASAN
> CPU: 0 PID: 1397 Comm: connect_ipv4 Tainted: G B W 6.6.0+ #47
> Call Trace:
> <TASK>
> ? die_addr+0x3c/0xa0
> ? exc_general_protection+0x144/0x210
> ? asm_exc_general_protection+0x22/0x30
> ? add_taint+0x26/0x90
> ? crypto_mod_get+0x20/0x60
> ? crypto_mod_get+0x1b/0x60
> ? ahash_def_finup_done1+0x58/0x80
> crypto_spawn_alg+0x53/0x140
> crypto_spawn_tfm2+0x13/0x60
> hmac_init_tfm+0x25/0x60
> crypto_ahash_setkey+0x8b/0x100
> tcp_ao_add_cmd+0xe7a/0x1120
> do_tcp_setsockopt+0x5ed/0x12a0
> do_sock_setsockopt+0x82/0x100
> __sys_setsockopt+0xe9/0x160
> __x64_sys_setsockopt+0x60/0x70
> do_syscall_64+0x3c/0xe0
> entry_SYSCALL_64_after_hwframe+0x46/0x4e
> </TASK>
> RIP: 0010:crypto_mod_get+0x20/0x60
Make sure that the child/clone has using_shash set when parent is
an shash user.
Fixes: 2f1f34c1bf7b ("crypto: ahash - optimize performance when wrapping shash")
Cc: David Ahern <dsahern@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Francesco Ruggeri <fruggeri05@gmail.com>
To: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Salam Noureddine <noureddine@arista.com>
Cc: netdev@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The "ahash" API provides access to both CPU-based and hardware offload-
based implementations of hash algorithms. Typically the former are
implemented as "shash" algorithms under the hood, while the latter are
implemented as "ahash" algorithms. The "ahash" API provides access to
both. Various kernel subsystems use the ahash API because they want to
support hashing hardware offload without using a separate API for it.
Yet, the common case is that a crypto accelerator is not actually being
used, and ahash is just wrapping a CPU-based shash algorithm.
This patch optimizes the ahash API for that common case by eliminating
the extra indirect call for each ahash operation on top of shash.
It also fixes the double-counting of crypto stats in this scenario
(though CONFIG_CRYPTO_STATS should *not* be enabled by anyone interested
in performance anyway...), and it eliminates redundant checking of
CRYPTO_TFM_NEED_KEY. As a bonus, it also shrinks struct crypto_ahash.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since the previous patch made crypto_shash_type visible to ahash.c,
change checks for '->cra_type != &crypto_ahash_type' to '->cra_type ==
&crypto_shash_type'. This makes more sense and avoids having to
forward-declare crypto_ahash_type. The result is still the same, since
the type is either shash or ahash here.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The functions that are involved in implementing the ahash API on top of
an shash algorithm belong better in ahash.c, not in shash.c where they
currently are. Move them.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Improve the file comment for crypto/ahash.c.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
struct ahash_request_priv is unused, so remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently, the ahash API checks the alignment of all key and result
buffers against the algorithm's declared alignmask, and for any
unaligned buffers it falls back to manually aligned temporary buffers.
This is virtually useless, however. First, since it does not apply to
the message, its effect is much more limited than e.g. is the case for
the alignmask for "skcipher". Second, the key and result buffers are
given as virtual addresses and cannot (in general) be DMA'ed into, so
drivers end up having to copy to/from them in software anyway. As a
result it's easy to use memcpy() or the unaligned access helpers.
The crypto_hash_walk_*() helper functions do use the alignmask to align
the message. But with one exception those are only used for shash
algorithms being exposed via the ahash API, not for native ahashes, and
aligning the message is not required in this case, especially now that
alignmask support has been removed from shash. The exception is the
n2_core driver, which doesn't set an alignmask.
In any case, no ahash algorithms actually set a nonzero alignmask
anymore. Therefore, remove support for it from ahash. The benefit is
that all the code to handle "misaligned" buffers in the ahash API goes
away, reducing the overhead of the ahash API.
This follows the same change that was made to shash.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move the macro CRYPTO_ALG_TYPE_AHASH_MASK out of linux/crypto.h
and into crypto/ahash.c so that it's not visible to users of the
Crypto API.
Also remove the unused CRYPTO_ALG_TYPE_HASH_MASK macro.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move the crypto_ahash_alg helper into include/crypto/internal so
that drivers can use it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As ahash drivers may need to use fallbacks, their state size
is thus variable. Deal with this by making it an attribute
of crypto_ahash.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Checking the config via ifdef incorrectly compiles out the report
functions when CRYPTO_USER is set to =m. Fix it by using IS_ENABLED()
instead.
Fixes: c0f9e01dd266 ("crypto: api - Check CRYPTO_USER instead of NET for report")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds the helpers crypto_clone_ahash and crypto_clone_shash.
They are the hash-specific counterparts of crypto_clone_tfm.
This allows code paths that cannot otherwise allocate a hash tfm
object to do so. Once a new tfm has been obtained its key could
then be changed without impacting other users.
Note that only algorithms that implement clone_tfm can be cloned.
However, all keyless hashes can be cloned by simply reusing the
tfm object.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The report function is currently conditionalised on CONFIG_NET.
As it's only used by CONFIG_CRYPTO_USER, conditionalising on that
instead of CONFIG_NET makes more sense.
This gets rid of a rarely used code-path.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move all stat code specific to hash into the hash code.
While we're at it, change the stats so that bytes and counts
are always incremented even in case of error. This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.
After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch does the final flag day conversion of all completion
functions which are now all contained in the Crypto API.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the crypto_request_complete helper instead of calling the
completion function directly.
This patch also removes the voodoo programming previously used
for unaligned ahash operations and replaces it with a sub-request.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
kmap_atomic() is used to create short-lived mappings of pages that may
not be accessible via the kernel direct map. This is only needed on
32-bit architectures that implement CONFIG_HIGHMEM, but it can be used
on 64-bit other architectures too, where the returned mapping is simply
the kernel direct address of the page.
However, kmap_atomic() does not support migration on CONFIG_HIGHMEM
configurations, due to the use of per-CPU kmap slots, and so it disables
preemption on all architectures, not just the 32-bit ones. This implies
that all scatterwalk based crypto routines essentially execute with
preemption disabled all the time, which is less than ideal.
So let's switch scatterwalk_map/_unmap and the shash/ahash routines to
kmap_local() instead, which serves a similar purpose, but without the
resulting impact on preemption on architectures that have no need for
CONFIG_HIGHMEM.
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Elliott, Robert (Servers)" <elliott@hpe.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds the type-safe init_tfm/exit_tfm functions to the
ahash interface. This is meant to replace the unsafe cra_init and
cra_exit interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
