| Age | Commit message (Collapse) | Author |
|---|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the customary type used for hardware ABIs.
Suggested-by: Xin Li <xin@zytor.com>
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In <asm/msr.h> the first parameter of do_trace_rdpmc() is named 'msr':
extern void do_trace_rdpmc(unsigned int msr, u64 val, int failed);
But in the definition it's 'counter':
void do_trace_rdpmc(unsigned counter, u64 val, int failed)
Use 'msr' in both cases, and change the type to u32.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The paravirt_read_pmc() result is in fact only loaded into an u64 variable.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Also fix some nearby whitespace damage while at it.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There's 9 uses of 'unsigned long long' in <asm/msr.h>, which is
really the same as 'u64', which is used 34 times.
Standardize on u64.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
GCC PR82602 that caused invalid scheduling of volatile asms:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82602
was fixed for gcc-8.1.0, the current minimum version of the
compiler required to compile the kernel.
Remove workaround that prevented invalid scheduling for
compilers, affected by PR82602.
There were no differences between old and new kernel object file
when compiled for x86_64 defconfig with gcc-8.1.0.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250407112316.378347-1-ubizjak@gmail.com
|
|
There are 4 wariants of initmem_init(), for 32 and 64 bits and for
CONFIG_NUMA enabled and disabled.
After commit bbeb69ce3013 ("x86/mm: Remove CONFIG_HIGHMEM64G support")
NUMA is not supported on 32 bit kernels anymore, and
arch/x86/mm/numa_32.c can be just deleted and setup_bootmem_allocator()
with completely misleading name can be folded into initmem_init().
For 64 bits the NUMA variant calls x86_numa_init() and !NUMA variant
sets all memory to node 0. The later can be split out into inline helper
called x86_numa_init() and then both initmem_init() functions become the
same.
Split out memblock_set_node() from initmem_init() for !NUMA on 64 bit
into x86_numa_init() helper and remove arch/x86/mm/numa_*.c that only
contained initmem_init() variants for NUMA configs.
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Len Brown <len.brown@intel.com>
Link: https://lore.kernel.org/r/20250409122815.420041-1-rppt@kernel.org
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This works around what seems to be an optimization bug in GCC (at least
13.3.0), where it predicts access_ok() to fail despite the hint to the
contrary.
_copy_to_user() contains:
if (access_ok(to, n)) {
instrument_copy_to_user(to, from, n);
n = raw_copy_to_user(to, from, n);
}
Where access_ok() is likely(__access_ok(addr, size)), yet the compiler
emits conditional jumps forward for the case where it succeeds:
<+0>: endbr64
<+4>: mov %rdx,%rcx
<+7>: mov %rdx,%rax
<+10>: xor %edx,%edx
<+12>: add %rdi,%rcx
<+15>: setb %dl
<+18>: movabs $0x123456789abcdef,%r8
<+28>: test %rdx,%rdx
<+31>: jne 0xffffffff81b3b7c6 <_copy_to_user+38>
<+33>: cmp %rcx,%r8
<+36>: jae 0xffffffff81b3b7cb <_copy_to_user+43>
<+38>: jmp 0xffffffff822673e0 <__x86_return_thunk>
<+43>: nop
<+44>: nop
<+45>: nop
<+46>: mov %rax,%rcx
<+49>: rep movsb %ds:(%rsi),%es:(%rdi)
<+51>: nop
<+52>: nop
<+53>: nop
<+54>: mov %rcx,%rax
<+57>: nop
<+58>: nop
<+59>: nop
<+60>: jmp 0xffffffff822673e0 <__x86_return_thunk>
Patching _copy_to_user() to likely() around the access_ok() use does
not change the asm.
However, spelling out the prediction *within* valid_user_address() does the
trick:
<+0>: endbr64
<+4>: xor %eax,%eax
<+6>: mov %rdx,%rcx
<+9>: add %rdi,%rdx
<+12>: setb %al
<+15>: movabs $0x123456789abcdef,%r8
<+25>: test %rax,%rax
<+28>: jne 0xffffffff81b315e6 <_copy_to_user+54>
<+30>: cmp %rdx,%r8
<+33>: jb 0xffffffff81b315e6 <_copy_to_user+54>
<+35>: nop
<+36>: nop
<+37>: nop
<+38>: rep movsb %ds:(%rsi),%es:(%rdi)
<+40>: nop
<+41>: nop
<+42>: nop
<+43>: nop
<+44>: nop
<+45>: nop
<+46>: mov %rcx,%rax
<+49>: jmp 0xffffffff82255ba0 <__x86_return_thunk>
<+54>: mov %rcx,%rax
<+57>: jmp 0xffffffff82255ba0 <__x86_return_thunk>
Since we kinda expect valid_user_address() to be likely anyway,
add the likely() annotation that also happens to work around
this compiler bug.
[ mingo: Moved the unlikely() branch into valid_user_address() & updated the changelog ]
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250401203029.1132135-1-mjguzik@gmail.com
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
IBPB is expected to clear the RSB. However, if X86_BUG_IBPB_NO_RET is
set, that doesn't happen. Make indirect_branch_prediction_barrier()
take that into account by calling write_ibpb() which clears RSB on
X86_BUG_IBPB_NO_RET:
/* Make sure IBPB clears return stack preductions too. */
FILL_RETURN_BUFFER %rax, RSB_CLEAR_LOOPS, X86_BUG_IBPB_NO_RET
Note that, as of the previous patch, write_ibpb() also reads
'x86_pred_cmd' in order to use SBPB when applicable:
movl _ASM_RIP(x86_pred_cmd), %eax
Therefore that existing behavior in indirect_branch_prediction_barrier()
is not lost.
Fixes: 50e4b3b94090 ("x86/entry: Have entry_ibpb() invalidate return predictions")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/bba68888c511743d4cd65564d1fc41438907523f.1744148254.git.jpoimboe@kernel.org
|
|
There's nothing entry-specific about entry_ibpb(). In preparation for
calling it from elsewhere, rename it to write_ibpb().
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/1e54ace131e79b760de3fe828264e26d0896e3ac.1744148254.git.jpoimboe@kernel.org
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA
- Use acquire/release semantics in the KVM FF-A proxy to avoid
reading a stale value for the FF-A version
- Fix KVM guest driver to match PV CPUID hypercall ABI
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work
s390:
- Don't use %pK for debug printing and tracepoints
x86:
- Use a separate subclass when acquiring KVM's per-CPU posted
interrupts wakeup lock in the scheduled out path, i.e. when adding
a vCPU on the list of vCPUs to wake, to workaround a false positive
deadlock. The schedule out code runs with a scheduler lock that the
wakeup handler takes in the opposite order; but it does so with
IRQs disabled and cannot run concurrently with a wakeup
- Explicitly zero-initialize on-stack CPUID unions
- Allow building irqbypass.ko as as module when kvm.ko is a module
- Wrap relatively expensive sanity check with KVM_PROVE_MMU
- Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
selftests:
- Add more scenarios to the MONITOR/MWAIT test
- Add option to rseq test to override /dev/cpu_dma_latency
- Bring list of exit reasons up to date
- Cleanup Makefile to list once tests that are valid on all
architectures
Other:
- Documentation fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: arm64: Use acquire/release to communicate FF-A version negotiation
KVM: arm64: selftests: Explicitly set the page attrs to Inner-Shareable
KVM: arm64: selftests: Introduce and use hardware-definition macros
KVM: VMX: Use separate subclasses for PI wakeup lock to squash false positive
KVM: VMX: Assert that IRQs are disabled when putting vCPU on PI wakeup list
KVM: x86: Explicitly zero-initialize on-stack CPUID unions
KVM: Allow building irqbypass.ko as as module when kvm.ko is a module
KVM: x86/mmu: Wrap sanity check on number of TDP MMU pages with KVM_PROVE_MMU
KVM: selftests: Add option to rseq test to override /dev/cpu_dma_latency
KVM: x86: Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
Documentation: kvm: remove KVM_CAP_MIPS_TE
Documentation: kvm: organize capabilities in the right section
Documentation: kvm: fix some definition lists
Documentation: kvm: drop "Capability" heading from capabilities
Documentation: kvm: give correct name for KVM_CAP_SPAPR_MULTITCE
Documentation: KVM: KVM_GET_SUPPORTED_CPUID now exposes TSC_DEADLINE
selftests: kvm: list once tests that are valid on all architectures
selftests: kvm: bring list of exit reasons up to date
selftests: kvm: revamp MONITOR/MWAIT tests
KVM: arm64: Don't translate FAR if invalid/unsafe
...
|
|
ANNOTATE_IGNORE_ALTERNATIVE adds additional noise to the code generated
by CLAC/STAC alternatives, hurting readability for those whose read
uaccess-related code generation on a regular basis.
Remove the annotation specifically for the "NOP patched with CLAC/STAC"
case in favor of a manual check.
Leave the other uses of that annotation in place as they're less common
and more difficult to detect.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/fc972ba4995d826fcfb8d02733a14be8d670900b.1744098446.git.jpoimboe@kernel.org
|
|
The relative rates among two or more events are useful for performance
analysis, e.g., a high branch miss rate may indicate a performance
issue. Usually, the samples with a relative rate that exceeds some
threshold are more useful. However, the traditional sampling takes
samples of events separately. To get the relative rates among two or
more events, a high sample rate is required, which can bring high
overhead. Many samples taken in the non-hotspot area are also dropped
(useless) in the post-process.
The auto counter reload (ACR) feature takes samples when the relative
rate of two or more events exceeds some threshold, which provides the
fine-grained information at a low cost.
To support the feature, two sets of MSRs are introduced. For a given
counter IA32_PMC_GPn_CTR/IA32_PMC_FXm_CTR, bit fields in the
IA32_PMC_GPn_CFG_B/IA32_PMC_FXm_CFG_B MSR indicate which counter(s)
can cause a reload of that counter. The reload value is stored in the
IA32_PMC_GPn_CFG_C/IA32_PMC_FXm_CFG_C.
The details can be found at Intel SDM (085), Volume 3, 21.9.11 Auto
Counter Reload.
In the hw_config(), an ACR event is specially configured, because the
cause/reloadable counter mask has to be applied to the dyn_constraint.
Besides the HW limit, e.g., not support perf metrics, PDist and etc, a
SW limit is applied as well. ACR events in a group must be contiguous.
It facilitates the later conversion from the event idx to the counter
idx. Otherwise, the intel_pmu_acr_late_setup() has to traverse the whole
event list again to find the "cause" event.
Also, add a new flag PERF_X86_EVENT_ACR to indicate an ACR group, which
is set to the group leader.
The late setup() is also required for an ACR group. It's to convert the
event idx to the counter idx, and saved it in hw.config1.
The ACR configuration MSRs are only updated in the enable_event().
The disable_event() doesn't clear the ACR CFG register.
Add acr_cfg_b/acr_cfg_c in the struct cpu_hw_events to cache the MSR
values. It can avoid a MSR write if the value is not changed.
Expose an acr_mask to the sysfs. The perf tool can utilize the new
format to configure the relation of events in the group. The bit
sequence of the acr_mask follows the events enabled order of the group.
Example:
Here is the snippet of the mispredict.c. Since the array has a random
numbers, jumps are random and often mispredicted.
The mispredicted rate depends on the compared value.
For the Loop1, ~11% of all branches are mispredicted.
For the Loop2, ~21% of all branches are mispredicted.
main()
{
...
for (i = 0; i < N; i++)
data[i] = rand() % 256;
...
/* Loop 1 */
for (k = 0; k < 50; k++)
for (i = 0; i < N; i++)
if (data[i] >= 64)
sum += data[i];
...
...
/* Loop 2 */
for (k = 0; k < 50; k++)
for (i = 0; i < N; i++)
if (data[i] >= 128)
sum += data[i];
...
}
Usually, a code with a high branch miss rate means a bad performance.
To understand the branch miss rate of the codes, the traditional method
usually samples both branches and branch-misses events. E.g.,
perf record -e "{cpu_atom/branch-misses/ppu, cpu_atom/branch-instructions/u}"
-c 1000000 -- ./mispredict
[ perf record: Woken up 4 times to write data ]
[ perf record: Captured and wrote 0.925 MB perf.data (5106 samples) ]
The 5106 samples are from both events and spread in both Loops.
In the post-process stage, a user can know that the Loop 2 has a 21%
branch miss rate. Then they can focus on the samples of branch-misses
events for the Loop 2.
With this patch, the user can generate the samples only when the branch
miss rate > 20%. For example,
perf record -e "{cpu_atom/branch-misses,period=200000,acr_mask=0x2/ppu,
cpu_atom/branch-instructions,period=1000000,acr_mask=0x3/u}"
-- ./mispredict
(Two different periods are applied to branch-misses and
branch-instructions. The ratio is set to 20%.
If the branch-instructions is overflowed first, the branch-miss
rate < 20%. No samples should be generated. All counters should be
automatically reloaded.
If the branch-misses is overflowed first, the branch-miss rate > 20%.
A sample triggered by the branch-misses event should be
generated. Just the counter of the branch-instructions should be
automatically reloaded.
The branch-misses event should only be automatically reloaded when
the branch-instructions is overflowed. So the "cause" event is the
branch-instructions event. The acr_mask is set to 0x2, since the
event index in the group of branch-instructions is 1.
The branch-instructions event is automatically reloaded no matter which
events are overflowed. So the "cause" events are the branch-misses
and the branch-instructions event. The acr_mask should be set to 0x3.)
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.098 MB perf.data (2498 samples) ]
$perf report
Percent │154: movl $0x0,-0x14(%rbp)
│ ↓ jmp 1af
│ for (i = j; i < N; i++)
│15d: mov -0x10(%rbp),%eax
│ mov %eax,-0x18(%rbp)
│ ↓ jmp 1a2
│ if (data[i] >= 128)
│165: mov -0x18(%rbp),%eax
│ cltq
│ lea 0x0(,%rax,4),%rdx
│ mov -0x8(%rbp),%rax
│ add %rdx,%rax
│ mov (%rax),%eax
│ ┌──cmp $0x7f,%eax
100.00 0.00 │ ├──jle 19e
│ │sum += data[i];
The 2498 samples are all from the branch-misses events for the Loop 2.
The number of samples and overhead is significantly reduced without
losing any information.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lkml.kernel.org/r/20250327195217.2683619-6-kan.liang@linux.intel.com
|
|
The counters that support the auto counter reload feature can be
enumerated in the CPUID Leaf 0x23 sub-leaf 0x2.
Add acr_cntr_mask to store the mask of counters which are reloadable.
Add acr_cause_mask to store the mask of counters which can cause reload.
Since the e-core and p-core may have different numbers of counters,
track the masks in the struct x86_hybrid_pmu as well.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lkml.kernel.org/r/20250327195217.2683619-5-kan.liang@linux.intel.com
|
|
This large commit contains the initial support for TDX in KVM. All x86
parts enable the host-side hypercalls that KVM uses to talk to the TDX
module, a software component that runs in a special CPU mode called SEAM
(Secure Arbitration Mode).
The series is in turn split into multiple sub-series, each with a separate
merge commit:
- Initialization: basic setup for using the TDX module from KVM, plus
ioctls to create TDX VMs and vCPUs.
- MMU: in TDX, private and shared halves of the address space are mapped by
different EPT roots, and the private half is managed by the TDX module.
Using the support that was added to the generic MMU code in 6.14,
add support for TDX's secure page tables to the Intel side of KVM.
Generic KVM code takes care of maintaining a mirror of the secure page
tables so that they can be queried efficiently, and ensuring that changes
are applied to both the mirror and the secure EPT.
- vCPU enter/exit: implement the callbacks that handle the entry of a TDX
vCPU (via the SEAMCALL TDH.VP.ENTER) and the corresponding save/restore
of host state.
- Userspace exits: introduce support for guest TDVMCALLs that KVM forwards to
userspace. These correspond to the usual KVM_EXIT_* "heavyweight vmexits"
but are triggered through a different mechanism, similar to VMGEXIT for
SEV-ES and SEV-SNP.
- Interrupt handling: support for virtual interrupt injection as well as
handling VM-Exits that are caused by vectored events. Exclusive to
TDX are machine-check SMIs, which the kernel already knows how to
handle through the kernel machine check handler (commit 7911f145de5f,
"x86/mce: Implement recovery for errors in TDX/SEAM non-root mode")
- Loose ends: handling of the remaining exits from the TDX module, including
EPT violation/misconfig and several TDVMCALL leaves that are handled in
the kernel (CPUID, HLT, RDMSR/WRMSR, GetTdVmCallInfo); plus returning
an error or ignoring operations that are not supported by TDX guests
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
|
|
Merge the local include "pgtable.h" -which declares the API of the
5-level paging trampoline- into <asm/boot.h> so that its implementation
in la57toggle.S as well as the calling code can be decoupled from the
traditional decompressor.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250401133416.1436741-9-ardb+git@google.com
|
|
LOAD_PHYSICAL_ADDR is calculated as an aligned (up) CONFIG_PHYSICAL_START
with the respective alignment value CONFIG_PHYSICAL_ALIGN. However,
the code is written openly while we have __ALIGN_KERNEL_MASK() macro
that does the same. This macro has nothing special, that's why
it may be used in assembler code or linker scripts (on the contrary
__ALIGN_KERNEL() may not). Do it so.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250404165303.3657139-1-andriy.shevchenko@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix a performance regression on AMD iGPU and dGPU drivers, related to
the unintended activation of DMA bounce buffers that regressed game
performance if KASLR disturbed things just enough
- Fix a copy_user_generic() performance regression on certain older
non-FSRM/ERMS CPUs
- Fix a Clang build warning due to a semantic merge conflict the Kunit
tree generated with the x86 tree
- Fix FRED related system hang during S4 resume
- Remove an unused API
* tag 'x86-urgent-2025-04-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fred: Fix system hang during S4 resume with FRED enabled
x86/platform/iosf_mbi: Remove unused iosf_mbi_unregister_pmic_bus_access_notifier()
x86/mm/init: Handle the special case of device private pages in add_pages(), to not increase max_pfn and trigger dma_addressing_limited() bounce buffers
x86/tools: Drop duplicate unlikely() definition in insn_decoder_test.c
x86/uaccess: Improve performance by aligning writes to 8 bytes in copy_user_generic(), on non-FSRM/ERMS CPUs
|
|
Wrap the TDP MMU page counter in CONFIG_KVM_PROVE_MMU so that the sanity
check is omitted from production builds, and more importantly to remove
the atomic accesses to account pages. A one-off memory leak in production
is relatively uninteresting, and a WARN_ON won't help mitigate a systemic
issue; it's as much about helping triage memory leaks as it is about
detecting them in the first place, and doesn't magically stop the leaks.
I.e. production environments will be quite sad if a severe KVM bug escapes,
regardless of whether or not KVM WARNs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250315023448.2358456-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Current minimum required version of binutils is 2.25,
which supports MONITOR and MWAIT instruction mnemonics.
Replace the byte-wise specification of MONITOR and
MWAIT with these proper mnemonics.
No functional change intended.
Note: LLVM assembler is not able to assemble correct forms of MONITOR
and MWAIT instructions with explicit operands and reports:
error: invalid operand for instruction
monitor %rax,%ecx,%edx
^~~~
# https://lore.kernel.org/oe-kbuild-all/202504030802.2lEVBSpN-lkp@intel.com/
Use instruction mnemonics with implicit operands to
work around this issue.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250403125111.429805-1-ubizjak@gmail.com
|
|
All functions in mwait_idle_with_hints() cast eax and ecx arguments
to u32. Propagate argument type to the enclosing function.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250403073105.245987-1-ubizjak@gmail.com
|
|
There is not much point in CONFIG_AS_TPAUSE at all when the emitted
assembly is always the same - it only obfuscates the __tpause() code
in essence.
Remove the TPAUSE insn mnemonic from __tpause() and leave only
the equivalent byte-wise definition. This can then be changed
back to insn mnemonic once binutils 2.31.1 is the minimum version
to build the kernel. (Right now it's 2.25.)
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250402180827.3762-4-ubizjak@gmail.com
|
|
Delimiters in asm() templates such as ';', '\t' or '\n' are not
required syntactically, they were used historically in the Linux
kernel to prettify the compiler's .s output for people who were
looking at compiler generated .s output.
Most x86 developers these days are primarily looking at:
1) objdump --disassemble-all .o
2) perf top's live kernel function annotation and disassembler
feature that uses /dev/mem.
... because:
- this kind of assembler output is standardized regardless of
compiler used,
- it's generally less messy looking,
- it gives ground-truth instead of being some intermediate layer
in the toolchain that might or might not be the real deal,
- and on a live kernel it also sees through the kernel's various
layers of runtime patching code obfuscation facilities, also
known as: alternative-instructions, tracepoints and jump labels.
There are some cases where the .s output is the most useful
tool, such as alternatives() code generation, but other than
that these delimiters used in simple asm() statements mostly
add noise to the source code side, which isn't desirable for
assembly code that is fragile enough already.
Remove the delimiters for <asm/mwait.h>, which also happens to
make the GCC inliner's asm() instruction length heuristics
more accurate...
[ mingo: Wrote a new changelog to give historic context and
to give people a chance to object. :-) ]
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250402180827.3762-3-ubizjak@gmail.com
|
|
instruction wrappers on 'u32'
MONITOR and MONITORX expect 32-bit unsigned integer arguments in the %ecx
and %edx registers. MWAIT and MWAITX expect 32-bit usigned int
argument in %eax and %ecx registers.
Some of the helpers around these instructions in <asm/mwait.h> are using
too wide types (long), standardize on u32 instead that makes it clear that
this is a hardware ABI.
[ mingo: Cleaned up the changelog. ]
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250402180827.3762-1-ubizjak@gmail.com
|
|
mwait_idle_with_hints() and prefer_mwait_c1_over_halt()
The following commit, 12 years ago:
7e98b7192046 ("x86, idle: Use static_cpu_has() for CLFLUSH workaround, add barriers")
added barriers around the CLFLUSH in mwait_idle_with_hints(), justified with:
... and add memory barriers around it since the documentation is explicit
that CLFLUSH is only ordered with respect to MFENCE.
This also triggered, 11 years ago, the same adjustment in:
f8e617f45829 ("sched/idle/x86: Optimize unnecessary mwait_idle() resched IPIs")
during development, although it failed to get the static_cpu_has_bug() treatment.
X86_BUG_CLFLUSH_MONITOR (a.k.a the AAI65 errata) is specific to Intel CPUs,
and the SDM currently states:
Executions of the CLFLUSH instruction are ordered with respect to each
other and with respect to writes, locked read-modify-write instructions,
and fence instructions[1].
With footnote 1 reading:
Earlier versions of this manual specified that executions of the CLFLUSH
instruction were ordered only by the MFENCE instruction. All processors
implementing the CLFLUSH instruction also order it relative to the other
operations enumerated above.
i.e. The SDM was incorrect at the time, and barriers should not have been
inserted. Double checking the original AAI65 errata (not available from
intel.com any more) shows no mention of barriers either.
Note: If this were a general codepath, the MFENCEs would be needed, because
AMD CPUs of the same vintage do sport otherwise-unordered CLFLUSHs.
Remove the unnecessary barriers. Furthermore, use a plain alternative(),
rather than static_cpu_has_bug() and/or no optimisation. The workaround
is a single instruction.
Use an explicit %rax pointer rather than a general memory operand, because
MONITOR takes the pointer implicitly in the same way.
[ mingo: Cleaned up the commit a bit. ]
Fixes: 7e98b7192046 ("x86, idle: Use static_cpu_has() for CLFLUSH workaround, add barriers")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250402172458.1378112-1-andrew.cooper3@citrix.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"Avoid direct HLT instruction execution in TDX guests.
TDX guests aren't expected to use the HLT instruction directly. It
causes a virtualization exception (#VE). While the #VE _can_ be
handled, the current handling is slow and buggy and the easiest thing
is just to avoid HLT in the first place. Plus, the kernel already has
paravirt infrastructure that makes it relatively painless.
Make TDX guests require paravirt and add some TDX-specific paravirt
handlers which avoid HLT in the normal halt routines. Also add a
warning in case another HLT sneaks in.
There was a report that this leads to a "major performance
improvement" on specjbb2015, probably because of the extra #VE
overhead or missed wakeups from the buggy HLT handling"
* tag 'x86_tdx_for_6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Emit warning if IRQs are enabled during HLT #VE handling
x86/tdx: Fix arch_safe_halt() execution for TDX VMs
x86/paravirt: Move halt paravirt calls under CONFIG_PARAVIRT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"These are objtool fixes and updates by Josh Poimboeuf, centered around
the fallout from the new CONFIG_OBJTOOL_WERROR=y feature, which,
despite its default-off nature, increased the profile/impact of
objtool warnings:
- Improve error handling and the presentation of warnings/errors
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations
- Update objtool to latest (known) compiler quirks and objtool bugs
triggered by compiler code generation
- Misc fixes"
* tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
objtool/loongarch: Add unwind hints in prepare_frametrace()
rcu-tasks: Always inline rcu_irq_work_resched()
context_tracking: Always inline ct_{nmi,irq}_{enter,exit}()
sched/smt: Always inline sched_smt_active()
objtool: Fix verbose disassembly if CROSS_COMPILE isn't set
objtool: Change "warning:" to "error: " for fatal errors
objtool: Always fail on fatal errors
Revert "objtool: Increase per-function WARN_FUNC() rate limit"
objtool: Append "()" to function name in "unexpected end of section" warning
objtool: Ignore end-of-section jumps for KCOV/GCOV
objtool: Silence more KCOV warnings, part 2
objtool, drm/vmwgfx: Don't ignore vmw_send_msg() for ORC
objtool: Fix STACK_FRAME_NON_STANDARD for cold subfunctions
objtool: Fix segfault in ignore_unreachable_insn()
objtool: Fix NULL printf() '%s' argument in builtin-check.c:save_argv()
objtool, lkdtm: Obfuscate the do_nothing() pointer
objtool, regulator: rk808: Remove potential undefined behavior in rk806_set_mode_dcdc()
objtool, ASoC: codecs: wcd934x: Remove potential undefined behavior in wcd934x_slim_irq_handler()
objtool, Input: cyapa - Remove undefined behavior in cyapa_update_fw_store()
objtool, panic: Disable SMAP in __stack_chk_fail()
...
|
|
P4D huge pages are not supported yet, let's use the generic definition
in <linux/pgtable.h>.
[ mingo: Cleaned up the changelog. ]
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Link: https://lore.kernel.org/r/20250331081327.256412-7-bhe@redhat.com
|
|
PGD huge pages are not supported yet, let's use the generic definition
in <linux/pgtable.h>.
[ mingo: Cleaned up the changelog. ]
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Link: https://lore.kernel.org/r/20250331081327.256412-6-bhe@redhat.com
|
|
<asm/x86_init.h>
[ mingo: Split off from another patch. ]
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250327234629.3953536-8-sohil.mehta@intel.com
|
|
NMI handlers can be registered by various subsystems, including drivers.
However, the interface for registering and unregistering such handlers
is not clearly documented. In the future, the interface may need to be
extended to identify the source of the NMI.
Add documentation to make the current API more understandable and easier
to use.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250327234629.3953536-8-sohil.mehta@intel.com
|
|
Commit:
c305a4e98378 ("x86: Move sysctls into arch/x86")
recently moved the sysctl handling of panic_on_unrecovered_nmi and
panic_on_io_nmi to x86-specific code. These variables no longer need to
be declared in the generic header file.
Relocate the variable definitions and declarations closer to where they
are used. This makes all the NMI panic options consistent and easier to
track.
[ mingo: Fixed up the SHA1 of the commit reference. ]
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: Joel Granados <joel.granados@kernel.org>
Link: https://lore.kernel.org/r/20250327234629.3953536-3-sohil.mehta@intel.com
|
|
The unknown_nmi_panic variable is used to control whether the kernel
should panic on unknown NMIs. There is a sysctl entry under:
/proc/sys/kernel/unknown_nmi_panic
which can be used to change the behavior at runtime.
However, it seems that in some places, the option unnecessarily depends
on CONFIG_X86_LOCAL_APIC. Other code in nmi.c uses unknown_nmi_panic
without such a dependency. This results in a few messy #ifdefs
splattered across the code. The dependency was likely introduce due to a
potential build bug reported a long time ago:
https://lore.kernel.org/lkml/40BC67F9.3000609@myrealbox.com/
This build bug no longer exists.
Also, similar NMI panic options, such as panic_on_unrecovered_nmi and
panic_on_io_nmi, do not have an explicit dependency on the local APIC
either.
Though, it's hard to imagine a production system without the local APIC
configuration, making a specific NMI sysctl option dependent on it
doesn't make sense.
Remove the explicit dependency between unknown NMI handling and the
local APIC to make the code cleaner and more consistent.
While at it, reorder the header includes to maintain alphabetical order.
[ mingo: Cleaned up the changelog a bit, truly ordered the headers ... ]
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250327234629.3953536-2-sohil.mehta@intel.com
|
|
iosf_mbi_unregister_pmic_bus_access_notifier()
The last use of iosf_mbi_unregister_pmic_bus_access_notifier() was
removed in 2017 by:
a5266db4d314 ("drm/i915: Acquire PUNIT->PMIC bus for intel_uncore_forcewake_reset()")
Remove it.
(Note that the '_unlocked' version is still used.)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/r/20241225175010.91783-1-linux@treblig.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "Enable strict percpu address space checks" from Uros
Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was found to be incorrect.
- The series "Some cleanup for memcg" from Chen Ridong implements some
relatively monir cleanups for the memcontrol code.
- The series "mm: fixes for device-exclusive entries (hmm)" from David
Hildenbrand fixes a boatload of issues which David found then using
device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now
succeed.
- The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
remove the z3fold and zbud implementations. They have been deprecated
for half a year and nobody has complained.
- The series "mm: further simplify VMA merge operation" from Lorenzo
Stoakes implements numerous simplifications in this area. No runtime
effects are anticipated.
- The series "mm/madvise: remove redundant mmap_lock operations from
process_madvise()" from SeongJae Park rationalizes the locking in the
madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The series "Tiny cleanup and improvements about SWAP code" from
Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak
user-visible output.
- The series "mm/damon/paddr: fix large folios access and schemes
handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The series "mm/damon/core: fix wrong and/or useless damos_walk()
behaviors" from SeongJae Park fixes a few issues with the accuracy of
kdamond's walking of DAMON regions.
- The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
Stoakes changes the interaction between framebuffer deferred-io and
core MM. No functional changes are anticipated - this is preparatory
work for the future removal of page structure fields.
- The series "mm/damon: add support for hugepage_size DAMOS filter"
from Usama Arif adds a DAMOS filter which permits the filtering by
huge page sizes.
- The series "mm: permit guard regions for file-backed/shmem mappings"
from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping
for pte-mapped large folios.
- The series "reimplement per-vma lock as a refcount" from Suren
Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
improves" from SeongJae Park does some maintenance work on the DAMON
docs.
- The series "hugetlb/CMA improvements for large systems" from Frank
van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The series "mm/damon: introduce DAMOS filter type for unmapped pages"
from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The series "selftests/mm: Some cleanups from trying to run them" from
Brendan Jackman fixes a pile of unrelated issues which Brendan
encountered while runnimg our selftests.
- The series "fs/proc/task_mmu: add guard region bit to pagemap" from
Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply
wasn't being effective.
- The series "mm: cleanups for device-exclusive entries (hmm)" from
David Hildenbrand implements a number of unrelated cleanups in this
code.
- The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
implements a number of preparatoty cleanups to the GENERIC_PTDUMP
Kconfig logic.
- The series "mm/damon: auto-tune aggregation interval" from SeongJae
Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the
code easier to follow.
- The series "page_counter cleanup and size reduction" from Shakeel
Butt cleans up the page_counter code and fixes a size increase which
we accidentally added late last year.
- The series "Add a command line option that enables control of how
many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The series "mm/damon: make allow filters after reject filters useful
and intuitive" from SeongJae Park improves the handling of allow and
reject filters. Behaviour is made more consistent and the documention
is updated accordingly.
- The series "Switch zswap to object read/write APIs" from Yosry Ahmed
updates zswap to the new object read/write APIs and thus permits the
removal of some legacy code from zpool and zsmalloc.
- The series "Some trivial cleanups for shmem" from Baolin Wang does as
it claims.
- The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
preparatoty refactoring and cleanup of the mremap() code.
- The series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The series "mm/damon: add sysfs dirs for managing DAMOS filters based
on handling layers" from SeongJae Park adds a couple of new sysfs
directories to ease the management of DAMON/DAMOS filters.
- The series "arch, mm: reduce code duplication in mem_init()" from
Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The series "mm: page_ext: Introduce new iteration API" from Luiz
Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The series "Buddy allocator like (or non-uniform) folio split" from
Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios
are generated.
- The series "Minimize xa_node allocation during xarry split" from Zi
Yan reduces the number of xarray xa_nodes which are generated during
an xarray split.
- The series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The series "Add tracepoints for lowmem reserves, watermarks and
totalreserve_pages" from Martin Liu adds some more tracepoints to the
page allocator code.
- The series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which
SeongJae observed during his earlier madvise work.
- The series "mm/hwpoison: Fix regressions in memory failure handling"
from Shuai Xue addresses two quite serious regressions which Shuai
has observed in the memory-failure implementation.
- The series "mm: reliable huge page allocator" from Johannes Weiner
makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The series "Minor memcg cleanups & prep for memdescs" from Matthew
Wilcox is preparatory work for the future implementation of memdescs.
- The series "track memory used by balloon drivers" from Nico Pache
introduces a way to track memory used by our various balloon drivers.
- The series "mm/damon: introduce DAMOS filter type for active pages"
from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
separates the proactive reclaim statistics from the direct reclaim
statistics.
- The series "mm/vmscan: don't try to reclaim hwpoison folio" from
Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
code.
* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
x86/mm: restore early initialization of high_memory for 32-bits
mm/vmscan: don't try to reclaim hwpoison folio
mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
selftests/mm: speed up split_huge_page_test
selftests/mm: uffd-unit-tests support for hugepages > 2M
docs/mm/damon/design: document active DAMOS filter type
mm/damon: implement a new DAMOS filter type for active pages
fs/dax: don't disassociate zero page entries
MM documentation: add "Unaccepted" meminfo entry
selftests/mm: add commentary about 9pfs bugs
fork: use __vmalloc_node() for stack allocation
docs/mm: Physical Memory: Populate the "Zones" section
xen: balloon: update the NR_BALLOON_PAGES state
hv_balloon: update the NR_BALLOON_PAGES state
balloon_compaction: update the NR_BALLOON_PAGES state
meminfo: add a per node counter for balloon drivers
mm: remove references to folio in __memcg_kmem_uncharge_page()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes and updates from Ingo Molnar:
- Fix a large number of x86 Kconfig dependency and help text accuracy
bugs/problems, by Mateusz Jończyk and David Heideberg
- Fix a VM_PAT interaction with fork() crash. This also touches core
kernel code
- Fix an ORC unwinder bug for interrupt entries
- Fixes and cleanups
- Fix an AMD microcode loader bug that can promote verification
failures into success
- Add early-printk support for MMIO based UARTs on an x86 board that
had no other serial debugging facility and also experienced early
boot crashes
* tag 'x86-urgent-2025-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Fix __apply_microcode_amd()'s return value
x86/mm/pat: Fix VM_PAT handling when fork() fails in copy_page_range()
x86/fpu: Update the outdated comment above fpstate_init_user()
x86/early_printk: Add support for MMIO-based UARTs
x86/dumpstack: Fix inaccurate unwinding from exception stacks due to misplaced assignment
x86/entry: Fix ORC unwinder for PUSH_REGS with save_ret=1
x86/Kconfig: Fix lists in X86_EXTENDED_PLATFORM help text
x86/Kconfig: Correct X86_X2APIC help text
x86/speculation: Remove the extra #ifdef around CALL_NOSPEC
x86/Kconfig: Document release year of glibc 2.3.3
x86/Kconfig: Make CONFIG_PCI_CNB20LE_QUIRK depend on X86_32
x86/Kconfig: Document CONFIG_PCI_MMCONFIG
x86/Kconfig: Update lists in X86_EXTENDED_PLATFORM
x86/Kconfig: Move all X86_EXTENDED_PLATFORM options together
x86/Kconfig: Always enable ARCH_SPARSEMEM_ENABLE
x86/Kconfig: Enable X86_X2APIC by default and improve help text
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf relisient spinlock support from Alexei Starovoitov:
"This patch set introduces Resilient Queued Spin Lock (or rqspinlock
with res_spin_lock() and res_spin_unlock() APIs).
This is a qspinlock variant which recovers the kernel from a stalled
state when the lock acquisition path cannot make forward progress.
This can occur when a lock acquisition attempt enters a deadlock
situation (e.g. AA, or ABBA), or more generally, when the owner of the
lock (which we’re trying to acquire) isn’t making forward progress.
Deadlock detection is the main mechanism used to provide instant
recovery, with the timeout mechanism acting as a final line of
defense. Detection is triggered immediately when beginning the waiting
loop of a lock slow path.
Additionally, BPF programs attached to different parts of the kernel
can introduce new control flow into the kernel, which increases the
likelihood of deadlocks in code not written to handle reentrancy.
There have been multiple syzbot reports surfacing deadlocks in
internal kernel code due to the diverse ways in which BPF programs can
be attached to different parts of the kernel. By switching the BPF
subsystem’s lock usage to rqspinlock, all of these issues are
mitigated at runtime.
This spin lock implementation allows BPF maps to become safer and
remove mechanisms that have fallen short in assuring safety when
nesting programs in arbitrary ways in the same context or across
different contexts.
We run benchmarks that stress locking scalability and perform
comparison against the baseline (qspinlock). For the rqspinlock case,
we replace the default qspinlock with it in the kernel, such that all
spin locks in the kernel use the rqspinlock slow path. As such,
benchmarks that stress kernel spin locks end up exercising rqspinlock.
More details in the cover letter in commit 6ffb9017e932 ("Merge branch
'resilient-queued-spin-lock'")"
* tag 'bpf_res_spin_lock' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (24 commits)
selftests/bpf: Add tests for rqspinlock
bpf: Maintain FIFO property for rqspinlock unlock
bpf: Implement verifier support for rqspinlock
bpf: Introduce rqspinlock kfuncs
bpf: Convert lpm_trie.c to rqspinlock
bpf: Convert percpu_freelist.c to rqspinlock
bpf: Convert hashtab.c to rqspinlock
rqspinlock: Add locktorture support
rqspinlock: Add entry to Makefile, MAINTAINERS
rqspinlock: Add macros for rqspinlock usage
rqspinlock: Add basic support for CONFIG_PARAVIRT
rqspinlock: Add a test-and-set fallback
rqspinlock: Add deadlock detection and recovery
rqspinlock: Protect waiters in trylock fallback from stalls
rqspinlock: Protect waiters in queue from stalls
rqspinlock: Protect pending bit owners from stalls
rqspinlock: Hardcode cond_acquire loops for arm64
rqspinlock: Add support for timeouts
rqspinlock: Drop PV and virtualization support
rqspinlock: Add rqspinlock.h header
...
|
|
Find first zero (FFZ) can be implemented by negating the
input and using find first set (FFS).
Before/after code generation comparison on ffz()-using
kernel code shows that code generation has not changed:
# kernel/signal.o:
text data bss dec hex filename
42121 3472 8 45601 b221 signal.o.before
42121 3472 8 45601 b221 signal.o.after
md5:
ce4c31e1bce96af19b62a5f9659842f1 signal.o.before.asm
ce4c31e1bce96af19b62a5f9659842f1 signal.o.after.asm
[ mingo: Added code generation check. ]
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250327095641.131483-1-ubizjak@gmail.com
|
|
Direct HLT instruction execution causes #VEs for TDX VMs which is routed
to hypervisor via TDCALL. If HLT is executed in STI-shadow, resulting #VE
handler will enable interrupts before TDCALL is routed to hypervisor
leading to missed wakeup events, as current TDX spec doesn't expose
interruptibility state information to allow #VE handler to selectively
enable interrupts.
Commit bfe6ed0c6727 ("x86/tdx: Add HLT support for TDX guests")
prevented the idle routines from executing HLT instruction in STI-shadow.
But it missed the paravirt routine which can be reached via this path
as an example:
kvm_wait() =>
safe_halt() =>
raw_safe_halt() =>
arch_safe_halt() =>
irq.safe_halt() =>
pv_native_safe_halt()
To reliably handle arch_safe_halt() for TDX VMs, introduce explicit
dependency on CONFIG_PARAVIRT and override paravirt halt()/safe_halt()
routines with TDX-safe versions that execute direct TDCALL and needed
interrupt flag updates. Executing direct TDCALL brings in additional
benefit of avoiding HLT related #VEs altogether.
As tested by Ryan Afranji:
"Tested with the specjbb2015 benchmark. It has heavy lock contention which leads
to many halt calls. TDX VMs suffered a poor score before this patchset.
Verified the major performance improvement with this patchset applied."
Fixes: bfe6ed0c6727 ("x86/tdx: Add HLT support for TDX guests")
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Ryan Afranji <afranji@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250228014416.3925664-3-vannapurve@google.com
|
|
CONFIG_PARAVIRT_XXL is mainly defined/used by XEN PV guests. For
other VM guest types, features supported under CONFIG_PARAVIRT
are self sufficient. CONFIG_PARAVIRT mainly provides support for
TLB flush operations and time related operations.
For TDX guest as well, paravirt calls under CONFIG_PARVIRT meets
most of its requirement except the need of HLT and SAFE_HLT
paravirt calls, which is currently defined under
CONFIG_PARAVIRT_XXL.
Since enabling CONFIG_PARAVIRT_XXL is too bloated for TDX guest
like platforms, move HLT and SAFE_HLT paravirt calls under
CONFIG_PARAVIRT.
Moving HLT and SAFE_HLT paravirt calls are not fatal and should not
break any functionality for current users of CONFIG_PARAVIRT.
Fixes: bfe6ed0c6727 ("x86/tdx: Add HLT support for TDX guests")
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Ryan Afranji <afranji@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20250228014416.3925664-2-vannapurve@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like
what I did last cycle for the CRC32 and CRC-T10DIF library
functions
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since
they are no longer needed there
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect
- Add kunit test cases for crc64_nvme and crc7
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c()
- Remove unnecessary prompts from some of the CRC kconfig options
- Further optimize the x86 crc32c code"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (36 commits)
x86/crc: drop the avx10_256 functions and rename avx10_512 to avx512
lib/crc: remove unnecessary prompt for CONFIG_CRC64
lib/crc: remove unnecessary prompt for CONFIG_LIBCRC32C
lib/crc: remove unnecessary prompt for CONFIG_CRC8
lib/crc: remove unnecessary prompt for CONFIG_CRC7
lib/crc: remove unnecessary prompt for CONFIG_CRC4
lib/crc7: unexport crc7_be_syndrome_table
lib/crc_kunit.c: update comment in crc_benchmark()
lib/crc_kunit.c: add test and benchmark for crc7_be()
x86/crc32: optimize tail handling for crc32c short inputs
riscv/crc64: add Zbc optimized CRC64 functions
riscv/crc-t10dif: add Zbc optimized CRC-T10DIF function
riscv/crc32: reimplement the CRC32 functions using new template
riscv/crc: add "template" for Zbc optimized CRC functions
x86/crc: add ANNOTATE_NOENDBR to suppress objtool warnings
x86/crc32: improve crc32c_arch() code generation with clang
x86/crc64: implement crc64_be and crc64_nvme using new template
x86/crc-t10dif: implement crc_t10dif using new template
x86/crc32: implement crc32_le using new template
x86/crc: add "template" for [V]PCLMULQDQ based CRC functions
...
|
