| Age | Commit message (Collapse) | Author |
|---|
|
The skcipher_walk functions can allocate memory and can fail, so
checking for errors is necessary.
Fixes: 1d373d4e8e15 ("crypto: x86 - Add optimized AEGIS implementations")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
skcipher_walk_done() can call kfree(), which takes a spinlock, which
makes it incorrect to call while preemption is disabled on PREEMPT_RT.
Therefore, end the kernel-mode FPU section before calling
skcipher_walk_done(), and restart it afterwards.
Moreover, pass atomic=false to skcipher_walk_aead_encrypt() instead of
atomic=true. The point of atomic=true was to make skcipher_walk_done()
safe to call while in a kernel-mode FPU section, but that does not
actually work. So just use the usual atomic=false.
Fixes: 1d373d4e8e15 ("crypto: x86 - Add optimized AEGIS implementations")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Stop wrapping skcipher and aead algorithms with the crypto SIMD helper
(crypto/simd.c). The only purpose of doing so was to work around x86
not always supporting kernel-mode FPU in softirqs. Specifically, if a
hardirq interrupted a task context kernel-mode FPU section and then a
softirqs were run at the end of that hardirq, those softirqs could not
use kernel-mode FPU. This has now been fixed. In combination with the
fact that the skcipher and aead APIs only support task and softirq
contexts, these can now just use kernel-mode FPU unconditionally on x86.
This simplifies the code and improves performance.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Rather than returning the address and storing the length into an
argument pointer, add an address field to the walk struct and use
that to store the address. The length is returned directly.
Change the done functions to use this stored address instead of
getting them from the caller.
Split the address into two using a union. The user should only
access the const version so that it is never changed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In crypto_aegis128_aesni_process_ad(), use scatterwalk_next() which
consolidates scatterwalk_clamp() and scatterwalk_map(). Use
scatterwalk_done_src() which consolidates scatterwalk_unmap(),
scatterwalk_advance(), and scatterwalk_done().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Struct fields are zero by default, so these lines of code have no
effect. Remove them to reduce the number of matches that are found when
grepping for cra_alignmask.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Update a caller of aegis128_aesni_ad() to round down the length to a
block boundary. After that, aegis128_aesni_ad(), aegis128_aesni_enc(),
and aegis128_aesni_dec() are only passed whole blocks. Update the
assembly code to take advantage of that, which eliminates some unneeded
instructions. For aegis128_aesni_enc() and aegis128_aesni_dec(), the
length is also always nonzero, so stop checking for zero length.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Adjust the prototypes of the AEGIS assembly functions:
- Use proper types instead of 'void *', when applicable.
- Move the length parameter to after the buffers it describes rather
than before, to match the usual convention. Also shorten its name to
just len (which is the name used in the assembly code).
- Declare register aliases at the beginning of each function rather than
once per file. This was necessary because len was moved, but also it
allows adding some aliases where raw registers were used before.
- Put assoclen and cryptlen in the correct order when declaring the
finalization function in the .c file.
- Remove the unnecessary "crypto_" prefix.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Start using SSE4.1 instructions in the AES-NI AEGIS code, with the first
use case being preparing the length block in fewer instructions.
In practice this does not reduce the set of CPUs on which the code can
run, because all Intel and AMD CPUs with AES-NI also have SSE4.1.
Upgrade the existing SSE2 feature check to SSE4.1, though it seems this
check is not strictly necessary; the aesni-intel module has been getting
away with using SSE4.1 despite checking for AES-NI only.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instead of using a struct of function pointers to decide whether to call
the encryption or decryption assembly functions, use a conditional
branch on a bool. Force-inline the functions to avoid actually
generating the branch. This improves performance slightly since
indirect calls are slow. Remove the now-unnecessary CFI stubs.
Note that just force-inlining the existing functions might cause the
compiler to optimize out the indirect branches, but that would not be a
reliable way to do it and the CFI stubs would still be required.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Don't bother providing empty stubs for the init and exit methods in
struct aead_alg, since they are optional anyway.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The CRYPTO_TFM_RES_BAD_KEY_LEN flag was apparently meant as a way to
make the ->setkey() functions provide more information about errors.
However, no one actually checks for this flag, which makes it pointless.
Also, many algorithms fail to set this flag when given a bad length key.
Reviewing just the generic implementations, this is the case for
aes-fixed-time, cbcmac, echainiv, nhpoly1305, pcrypt, rfc3686, rfc4309,
rfc7539, rfc7539esp, salsa20, seqiv, and xcbc. But there are probably
many more in arch/*/crypto/ and drivers/crypto/.
Some algorithms can even set this flag when the key is the correct
length. For example, authenc and authencesn set it when the key payload
is malformed in any way (not just a bad length), the atmel-sha and ccree
drivers can set it if a memory allocation fails, and the chelsio driver
sets it for bad auth tag lengths, not just bad key lengths.
So even if someone actually wanted to start checking this flag (which
seems unlikely, since it's been unused for a long time), there would be
a lot of work needed to get it working correctly. But it would probably
be much better to go back to the drawing board and just define different
return values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.
So just remove this flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the x86 implementation of AEGIS-128 to use the AEAD SIMD
helpers, rather than hand-rolling the same functionality. This
simplifies the code and also fixes the bug where the user-provided
aead_request is modified.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The x86 AEGIS implementations all fail the improved AEAD tests because
they produce the wrong result with some data layouts. The issue is that
they assume that if the skcipher_walk API gives 'nbytes' not aligned to
the walksize (a.k.a. walk.stride), then it is the end of the data. In
fact, this can happen before the end.
Also, when the CRYPTO_TFM_REQ_MAY_SLEEP flag is given, they can
incorrectly sleep in the skcipher_walk_*() functions while preemption
has been disabled by kernel_fpu_begin().
Fix these bugs.
Fixes: 1d373d4e8e15 ("crypto: x86 - Add optimized AEGIS implementations")
Cc: <stable@vger.kernel.org> # v4.18+
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
It turns out OSXSAVE needs to be checked only for AVX, not for SSE.
Without this patch the affected modules refuse to load on CPUs with SSE2
but without AVX support.
Fixes: 877ccce7cbe8 ("crypto: x86/aegis,morus - Fix and simplify CPUID checks")
Cc: <stable@vger.kernel.org> # 4.18
Reported-by: Zdenek Kaspar <zkaspar82@gmail.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
It turns out I had misunderstood how the x86_match_cpu() function works.
It evaluates a logical OR of the matching conditions, not logical AND.
This caused the CPU feature checks for AEGIS to pass even if only SSE2
(but not AES-NI) was supported (or vice versa), leading to potential
crashes if something tried to use the registered algs.
This patch switches the checks to a simpler method that is used e.g. in
the Camellia x86 code.
The patch also removes the MODULE_DEVICE_TABLE declarations which
actually seem to cause the modules to be auto-loaded at boot, which is
not desired. The crypto API on-demand module loading is sufficient.
Fixes: 1d373d4e8e15 ("crypto: x86 - Add optimized AEGIS implementations")
Fixes: 6ecc9d9ff91f ("crypto: x86 - Add optimized MORUS implementations")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds optimized implementations of AEGIS-128, AEGIS-128L,
and AEGIS-256, utilizing the AES-NI and SSE2 x86 extensions.
Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
