| Age | Commit message (Collapse) | Author |
|---|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Host driver for GICv5, the next generation interrupt controller for
arm64, including support for interrupt routing, MSIs, interrupt
translation and wired interrupts
- Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on
GICv5 hardware, leveraging the legacy VGIC interface
- Userspace control of the 'nASSGIcap' GICv3 feature, allowing
userspace to disable support for SGIs w/o an active state on
hardware that previously advertised it unconditionally
- Map supporting endpoints with cacheable memory attributes on
systems with FEAT_S2FWB and DIC where KVM no longer needs to
perform cache maintenance on the address range
- Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the
guest hypervisor to inject external aborts into an L2 VM and take
traps of masked external aborts to the hypervisor
- Convert more system register sanitization to the config-driven
implementation
- Fixes to the visibility of EL2 registers, namely making VGICv3
system registers accessible through the VGIC device instead of the
ONE_REG vCPU ioctls
- Various cleanups and minor fixes
LoongArch:
- Add stat information for in-kernel irqchip
- Add tracepoints for CPUCFG and CSR emulation exits
- Enhance in-kernel irqchip emulation
- Various cleanups
RISC-V:
- Enable ring-based dirty memory tracking
- Improve perf kvm stat to report interrupt events
- Delegate illegal instruction trap to VS-mode
- MMU improvements related to upcoming nested virtualization
s390x
- Fixes
x86:
- Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O
APIC, PIC, and PIT emulation at compile time
- Share device posted IRQ code between SVM and VMX and harden it
against bugs and runtime errors
- Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups
O(1) instead of O(n)
- For MMIO stale data mitigation, track whether or not a vCPU has
access to (host) MMIO based on whether the page tables have MMIO
pfns mapped; using VFIO is prone to false negatives
- Rework the MSR interception code so that the SVM and VMX APIs are
more or less identical
- Recalculate all MSR intercepts from scratch on MSR filter changes,
instead of maintaining shadow bitmaps
- Advertise support for LKGS (Load Kernel GS base), a new instruction
that's loosely related to FRED, but is supported and enumerated
independently
- Fix a user-triggerable WARN that syzkaller found by setting the
vCPU in INIT_RECEIVED state (aka wait-for-SIPI), and then putting
the vCPU into VMX Root Mode (post-VMXON). Trying to detect every
possible path leading to architecturally forbidden states is hard
and even risks breaking userspace (if it goes from valid to valid
state but passes through invalid states), so just wait until
KVM_RUN to detect that the vCPU state isn't allowed
- Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling
interception of APERF/MPERF reads, so that a "properly" configured
VM can access APERF/MPERF. This has many caveats (APERF/MPERF
cannot be zeroed on vCPU creation or saved/restored on suspend and
resume, or preserved over thread migration let alone VM migration)
but can be useful whenever you're interested in letting Linux
guests see the effective physical CPU frequency in /proc/cpuinfo
- Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been
created, as there's no known use case for changing the default
frequency for other VM types and it goes counter to the very reason
why the ioctl was added to the vm file descriptor. And also, there
would be no way to make it work for confidential VMs with a
"secure" TSC, so kill two birds with one stone
- Dynamically allocation the shadow MMU's hashed page list, and defer
allocating the hashed list until it's actually needed (the TDP MMU
doesn't use the list)
- Extract many of KVM's helpers for accessing architectural local
APIC state to common x86 so that they can be shared by guest-side
code for Secure AVIC
- Various cleanups and fixes
x86 (Intel):
- Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest.
Failure to honor FREEZE_IN_SMM can leak host state into guests
- Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to
prevent L1 from running L2 with features that KVM doesn't support,
e.g. BTF
x86 (AMD):
- WARN and reject loading kvm-amd.ko instead of panicking the kernel
if the nested SVM MSRPM offsets tracker can't handle an MSR (which
is pretty much a static condition and therefore should never
happen, but still)
- Fix a variety of flaws and bugs in the AVIC device posted IRQ code
- Inhibit AVIC if a vCPU's ID is too big (relative to what hardware
supports) instead of rejecting vCPU creation
- Extend enable_ipiv module param support to SVM, by simply leaving
IsRunning clear in the vCPU's physical ID table entry
- Disable IPI virtualization, via enable_ipiv, if the CPU is affected
by erratum #1235, to allow (safely) enabling AVIC on such CPUs
- Request GA Log interrupts if and only if the target vCPU is
blocking, i.e. only if KVM needs a notification in order to wake
the vCPU
- Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to
the vCPU's CPUID model
- Accept any SNP policy that is accepted by the firmware with respect
to SMT and single-socket restrictions. An incompatible policy
doesn't put the kernel at risk in any way, so there's no reason for
KVM to care
- Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and
use WBNOINVD instead of WBINVD when possible for SEV cache
maintenance
- When reclaiming memory from an SEV guest, only do cache flushes on
CPUs that have ever run a vCPU for the guest, i.e. don't flush the
caches for CPUs that can't possibly have cache lines with dirty,
encrypted data
Generic:
- Rework irqbypass to track/match producers and consumers via an
xarray instead of a linked list. Using a linked list leads to
O(n^2) insertion times, which is hugely problematic for use cases
that create large numbers of VMs. Such use cases typically don't
actually use irqbypass, but eliminating the pointless registration
is a future problem to solve as it likely requires new uAPI
- Track irqbypass's "token" as "struct eventfd_ctx *" instead of a
"void *", to avoid making a simple concept unnecessarily difficult
to understand
- Decouple device posted IRQs from VFIO device assignment, as binding
a VM to a VFIO group is not a requirement for enabling device
posted IRQs
- Clean up and document/comment the irqfd assignment code
- Disallow binding multiple irqfds to an eventfd with a priority
waiter, i.e. ensure an eventfd is bound to at most one irqfd
through the entire host, and add a selftest to verify eventfd:irqfd
bindings are globally unique
- Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues
related to private <=> shared memory conversions
- Drop guest_memfd's .getattr() implementation as the VFS layer will
call generic_fillattr() if inode_operations.getattr is NULL
- Fix issues with dirty ring harvesting where KVM doesn't bound the
processing of entries in any way, which allows userspace to keep
KVM in a tight loop indefinitely
- Kill off kvm_arch_{start,end}_assignment() and x86's associated
tracking, now that KVM no longer uses assigned_device_count as a
heuristic for either irqbypass usage or MDS mitigation
Selftests:
- Fix a comment typo
- Verify KVM is loaded when getting any KVM module param so that
attempting to run a selftest without kvm.ko loaded results in a
SKIP message about KVM not being loaded/enabled (versus some random
parameter not existing)
- Skip tests that hit EACCES when attempting to access a file, and
print a "Root required?" help message. In most cases, the test just
needs to be run with elevated permissions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (340 commits)
Documentation: KVM: Use unordered list for pre-init VGIC registers
RISC-V: KVM: Avoid re-acquiring memslot in kvm_riscv_gstage_map()
RISC-V: KVM: Use find_vma_intersection() to search for intersecting VMAs
RISC-V: perf/kvm: Add reporting of interrupt events
RISC-V: KVM: Enable ring-based dirty memory tracking
RISC-V: KVM: Fix inclusion of Smnpm in the guest ISA bitmap
RISC-V: KVM: Delegate illegal instruction fault to VS mode
RISC-V: KVM: Pass VMID as parameter to kvm_riscv_hfence_xyz() APIs
RISC-V: KVM: Factor-out g-stage page table management
RISC-V: KVM: Add vmid field to struct kvm_riscv_hfence
RISC-V: KVM: Introduce struct kvm_gstage_mapping
RISC-V: KVM: Factor-out MMU related declarations into separate headers
RISC-V: KVM: Use ncsr_xyz() in kvm_riscv_vcpu_trap_redirect()
RISC-V: KVM: Implement kvm_arch_flush_remote_tlbs_range()
RISC-V: KVM: Don't flush TLB when PTE is unchanged
RISC-V: KVM: Replace KVM_REQ_HFENCE_GVMA_VMID_ALL with KVM_REQ_TLB_FLUSH
RISC-V: KVM: Rename and move kvm_riscv_local_tlb_sanitize()
RISC-V: KVM: Drop the return value of kvm_riscv_vcpu_aia_init()
RISC-V: KVM: Check kvm_riscv_vcpu_alloc_vector_context() return value
KVM: arm64: selftests: Add FEAT_RAS EL2 registers to get-reg-list
...
|
|
In __vcpu_run() and do_vsie_run(), we enter an RCU extended quiescent
state (EQS) by calling guest_enter_irqoff(), which lasts until
__vcpu_run() calls guest_exit_irqoff(). However, between the two we
enable interrupts and may handle interrupts during the EQS. As the IRQ
entry code will not wake RCU in this case, we may run the core IRQ code
and IRQ handler without RCU watching, leading to various potential
problems.
It is necessary to unmask (host) interrupts around entering the guest,
as entering the guest via SIE will not automatically unmask these. When
a host interrupt is taken from a guest, it is taken via its regular
host IRQ handler rather than being treated as a direct exit from SIE.
Due to this, we cannot simply mask interrupts around guest entry, and
must handle interrupts during this window, waking RCU as required.
Additionally, between guest_enter_irqoff() and guest_exit_irqoff(), we
use local_irq_enable() and local_irq_disable() to unmask interrupts,
violating the ordering requirements for RCU/lockdep/tracing around
entry/exit sequences. Further, since this occurs in an instrumentable
function, it's possible that instrumented code runs during this window,
with potential usage of RCU, etc.
To fix the RCU wakeup problem, an s390 implementation of
arch_in_rcu_eqs() is added which checks for PF_VCPU in current->flags.
PF_VCPU is set/cleared by guest_timing_{enter,exit}_irqoff(), which
surround the actual guest entry.
To fix the remaining issues, the lower-level guest entry logic is moved
into a shared noinstr helper function using the
guest_state_{enter,exit}_irqoff() helpers. These perform all the
lockdep/RCU/tracing manipulation necessary, but as sie64a() does not
enable/disable interrupts, we must do this explicitly with the
non-instrumented arch_local_irq_{enable,disable}() helpers:
guest_state_enter_irqoff()
arch_local_irq_enable();
sie64a(...);
arch_local_irq_disable();
guest_state_exit_irqoff();
[ajd@linux.ibm.com: rebase, fix commit message]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20250708092742.104309-3-ajd@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20250708092742.104309-3-ajd@linux.ibm.com>
|
|
Explicitly include <linux/export.h> in files which contain an
EXPORT_SYMBOL().
See commit a934a57a42f6 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") for more details.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
All functions in kvm/gmap.c fit better in kvm/pv.c instead.
Move and rename them appropriately, then delete the now empty
kvm/gmap.c and kvm/gmap.h.
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20250528095502.226213-5-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250528095502.226213-5-imbrenda@linux.ibm.com>
|
|
Refactor some gmap functions; move the implementation into a separate
file with only helper functions. The new helper functions work on vm
addresses, leaving all gmap logic in the gmap functions, which mostly
become just wrappers.
The whole gmap handling is going to be moved inside KVM soon, but the
helper functions need to touch core mm functions, and thus need to
stay in the core of kernel.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20250528095502.226213-4-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250528095502.226213-4-imbrenda@linux.ibm.com>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA
- Use acquire/release semantics in the KVM FF-A proxy to avoid
reading a stale value for the FF-A version
- Fix KVM guest driver to match PV CPUID hypercall ABI
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work
s390:
- Don't use %pK for debug printing and tracepoints
x86:
- Use a separate subclass when acquiring KVM's per-CPU posted
interrupts wakeup lock in the scheduled out path, i.e. when adding
a vCPU on the list of vCPUs to wake, to workaround a false positive
deadlock. The schedule out code runs with a scheduler lock that the
wakeup handler takes in the opposite order; but it does so with
IRQs disabled and cannot run concurrently with a wakeup
- Explicitly zero-initialize on-stack CPUID unions
- Allow building irqbypass.ko as as module when kvm.ko is a module
- Wrap relatively expensive sanity check with KVM_PROVE_MMU
- Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
selftests:
- Add more scenarios to the MONITOR/MWAIT test
- Add option to rseq test to override /dev/cpu_dma_latency
- Bring list of exit reasons up to date
- Cleanup Makefile to list once tests that are valid on all
architectures
Other:
- Documentation fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: arm64: Use acquire/release to communicate FF-A version negotiation
KVM: arm64: selftests: Explicitly set the page attrs to Inner-Shareable
KVM: arm64: selftests: Introduce and use hardware-definition macros
KVM: VMX: Use separate subclasses for PI wakeup lock to squash false positive
KVM: VMX: Assert that IRQs are disabled when putting vCPU on PI wakeup list
KVM: x86: Explicitly zero-initialize on-stack CPUID unions
KVM: Allow building irqbypass.ko as as module when kvm.ko is a module
KVM: x86/mmu: Wrap sanity check on number of TDP MMU pages with KVM_PROVE_MMU
KVM: selftests: Add option to rseq test to override /dev/cpu_dma_latency
KVM: x86: Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
Documentation: kvm: remove KVM_CAP_MIPS_TE
Documentation: kvm: organize capabilities in the right section
Documentation: kvm: fix some definition lists
Documentation: kvm: drop "Capability" heading from capabilities
Documentation: kvm: give correct name for KVM_CAP_SPAPR_MULTITCE
Documentation: KVM: KVM_GET_SUPPORTED_CPUID now exposes TSC_DEADLINE
selftests: kvm: list once tests that are valid on all architectures
selftests: kvm: bring list of exit reasons up to date
selftests: kvm: revamp MONITOR/MWAIT tests
KVM: arm64: Don't translate FAR if invalid/unsafe
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
Pointer print format fixes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add sorting of mcount locations at build time
- Rework uaccess functions with C exception handling to shorten inline
assembly size and enable full inlining. This yields near-optimal code
for small constant copies with a ~40kb kernel size increase
- Add support for a configurable STRICT_MM_TYPECHECKS which allows to
generate better code, but also allows to have type checking for debug
builds
- Optimize get_lowcore() for common callers with alternatives that
nearly revert to the pre-relocated lowcore code, while also slightly
reducing syscall entry and exit time
- Convert MACHINE_HAS_* checks for single facility tests into cpu_has_*
style macros that call test_facility(), and for features with
additional conditions, add a new ALT_TYPE_FEATURE alternative to
provide a static branch via alternative patching. Also, move machine
feature detection to the decompressor for early patching and add
debugging functionality to easily show which alternatives are patched
- Add exception table support to early boot / startup code to get rid
of the open coded exception handling
- Use asm_inline for all inline assemblies with EX_TABLE or ALTERNATIVE
to ensure correct inlining and unrolling decisions
- Remove 2k page table leftovers now that s390 has been switched to
always allocate 4k page tables
- Split kfence pool into 4k mappings in arch_kfence_init_pool() and
remove the architecture-specific kfence_split_mapping()
- Use READ_ONCE_NOCHECK() in regs_get_kernel_stack_nth() to silence
spurious KASAN warnings from opportunistic ftrace argument tracing
- Force __atomic_add_const() variants on s390 to always return void,
ensuring compile errors for improper usage
- Remove s390's ioremap_wt() and pgprot_writethrough() due to
mismatched semantics and lack of known users, relying on asm-generic
fallbacks
- Signal eventfd in vfio-ap to notify userspace when the guest AP
configuration changes, including during mdev removal
- Convert mdev_types from an array to a pointer in vfio-ccw and vfio-ap
drivers to avoid fake flex array confusion
- Cleanup trap code
- Remove references to the outdated linux390@de.ibm.com address
- Other various small fixes and improvements all over the code
* tag 's390-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (78 commits)
s390: Use inline qualifier for all EX_TABLE and ALTERNATIVE inline assemblies
s390/kfence: Split kfence pool into 4k mappings in arch_kfence_init_pool()
s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()
s390/boot: Ignore vmlinux.map
s390/sysctl: Remove "vm/allocate_pgste" sysctl
s390: Remove 2k vs 4k page table leftovers
s390/tlb: Use mm_has_pgste() instead of mm_alloc_pgste()
s390/lowcore: Use lghi instead llilh to clear register
s390/syscall: Merge __do_syscall() and do_syscall()
s390/spinlock: Implement SPINLOCK_LOCKVAL with inline assembly
s390/smp: Implement raw_smp_processor_id() with inline assembly
s390/current: Implement current with inline assembly
s390/lowcore: Use inline qualifier for get_lowcore() inline assembly
s390: Move s390 sysctls into their own file under arch/s390
s390/syscall: Simplify syscall_get_arguments()
s390/vfio-ap: Notify userspace that guest's AP config changed when mdev removed
s390: Remove ioremap_wt() and pgprot_writethrough()
s390/mm: Add configurable STRICT_MM_TYPECHECKS
s390/mm: Convert pgste_val() into function
s390/mm: Convert pgprot_val() into function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
|
|
Restricted pointers ("%pK") are only meant to be used when directly
printing to a file from task context.
Otherwise it can unintentionally expose security sensitive,
raw pointer values.
Use regular pointer formatting instead.
Link: https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c7070468023@linutronix.de/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Link: https://lore.kernel.org/r/20250217-restricted-pointers-s390-v1-2-0e4ace75d8aa@linutronix.de
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20250217-restricted-pointers-s390-v1-2-0e4ace75d8aa@linutronix.de>
|
|
Holding the pte lock for the page that is being converted to secure is
needed to avoid races. A previous commit removed the locking, which
caused issues. Fix by locking the pte again.
Fixes: 5cbe24350b7d ("KVM: s390: move pv gmap functions into kvm")
Reported-by: David Hildenbrand <david@redhat.com>
Tested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[david@redhat.com: replace use of get_locked_pte() with folio_walk_start()]
Link: https://lore.kernel.org/r/20250312184912.269414-2-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250312184912.269414-2-imbrenda@linux.ibm.com>
|
|
Use static branch(es) to implement and use machine_has_esop() instead
of a runtime check via MACHINE_HAS_ESOP.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Use static branch(es) to implement and use machine_has_tlb_guest()
instead of a runtime check via MACHINE_HAS_TLB_GUEST.
Also add sclp_early_detect_machine_features() in order to allow for
feature detection from the decompressor.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Convert MACHINE_HAS_... to cpu_has_...() which uses test_facility() instead
of testing the machine_flags lowcore member if the feature is present.
test_facility() generates better code since it results in a static branch
without accessing memory. The branch is patched via alternatives by the
decompressor depending on the availability of the required facility.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/all/637865c62963fb8cddf6c4368ca12434988a8c27.1738746821.git.namcao@linutronix.de
|
|
Move some gmap shadowing functions from mm/gmap.c to kvm/kvm-s390.c and
the newly created kvm/gmap-vsie.c
This is a step toward removing gmap from mm.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250123144627.312456-10-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250123144627.312456-10-imbrenda@linux.ibm.com>
|
|
Refactor the existing page fault handling code to use __kvm_faultin_pfn().
This possible now that memslots are always present.
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250123144627.312456-7-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250123144627.312456-7-imbrenda@linux.ibm.com>
|
|
Move gmap related functions from kernel/uv into kvm.
Create a new file to collect gmap-related functions.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
[fixed unpack_one(), thanks mhartmay@linux.ibm.com]
Link: https://lore.kernel.org/r/20250123144627.312456-6-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250123144627.312456-6-imbrenda@linux.ibm.com>
|
|
Create a fake memslot for ucontrol VMs. The fake memslot identity-maps
userspace.
Now memslots will always be present, and ucontrol is not a special case
anymore.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20250123144627.312456-4-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250123144627.312456-4-imbrenda@linux.ibm.com>
|
|
Wrap the call to KVM_BUG; this reduces code duplication and improves
readability.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20250123144627.312456-3-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250123144627.312456-3-imbrenda@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
- Add swap entry for hugetlbfs support
- Add PTE_MARKER support for hugetlbs mappings; this fixes a regression
(possible page fault loop) which was introduced when support for
UFFDIO_POISON for hugetlbfs was added
- Add ARCH_HAS_PREEMPT_LAZY and PREEMPT_DYNAMIC support
- Mark IRQ entries in entry code, so that stack tracers can filter out
the non-IRQ parts of stack traces. This fixes stack depot capacity
limit warnings, since without filtering the number of unique stack
traces is huge
- In PCI code fix leak of struct zpci_dev object, and fix potential
double remove of hotplug slot
- Fix pagefault_disable() / pagefault_enable() unbalance in
arch_stack_user_walk_common()
- A couple of inline assembly optimizations, more cmpxchg() to
try_cmpxchg() conversions, and removal of usages of xchg() and
cmpxchg() on one and two byte memory areas
- Various other small improvements and cleanups
* tag 's390-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (27 commits)
Revert "s390/mm: Allow large pages for KASAN shadow mapping"
s390/spinlock: Use flag output constraint for arch_cmpxchg_niai8()
s390/spinlock: Use R constraint for arch_load_niai4()
s390/spinlock: Generate shorter code for arch_spin_unlock()
s390/spinlock: Remove condition code clobber from arch_spin_unlock()
s390/spinlock: Use symbolic names in inline assemblies
s390: Support PREEMPT_DYNAMIC
s390/pci: Fix potential double remove of hotplug slot
s390/pci: Fix leak of struct zpci_dev when zpci_add_device() fails
s390/mm/hugetlbfs: Add missing includes
s390/mm: Add PTE_MARKER support for hugetlbfs mappings
s390/mm: Introduce region-third and segment table swap entries
s390/mm: Introduce region-third and segment table entry present bits
s390/mm: Rearrange region-third and segment table entry SW bits
KVM: s390: Increase size of union sca_utility to four bytes
KVM: s390: Remove one byte cmpxchg() usage
KVM: s390: Use try_cmpxchg() instead of cmpxchg() loops
s390/ap: Replace xchg() with WRITE_ONCE()
s390/mm: Allow large pages for KASAN shadow mapping
s390: Add ARCH_HAS_PREEMPT_LAZY support
...
|
|
Convert all cmpxchg() loops to try_cmpxchg() loops. With gcc 14 and the
usage of flag output operands in try_cmpxchg() this allows the compiler to
generate slightly better code.
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241126102515.3178914-2-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Pull kvm updates from Paolo Bonzini:
"The biggest change here is eliminating the awful idea that KVM had of
essentially guessing which pfns are refcounted pages.
The reason to do so was that KVM needs to map both non-refcounted
pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP
VMAs that contain refcounted pages.
However, the result was security issues in the past, and more recently
the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by
struct page but is not refcounted. In particular this broke virtio-gpu
blob resources (which directly map host graphics buffers into the
guest as "vram" for the virtio-gpu device) with the amdgpu driver,
because amdgpu allocates non-compound higher order pages and the tail
pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the
per-architecture code, to always work on the pfn whenever possible.
The large series that did this, from David Stevens and Sean
Christopherson, also cleaned up substantially the set of functions
that provided arch code with the pfn for a host virtual addresses.
The previous maze of twisty little passages, all different, is
replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the
non-__ versions of these two, and kvm_prefetch_pages) saving almost
200 lines of code.
ARM:
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This
call was introduced in PSCIv1.3 as a mechanism to request
hibernation, similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested
synchronous external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
- Add iocsr and mmio bus simulation in kernel.
- Add in-kernel interrupt controller emulation.
- Add support for virtualization extensions to the eiointc irqchip.
PPC:
- Drop lingering and utterly obsolete references to PPC970 KVM, which
was removed 10 years ago.
- Fix incorrect documentation references to non-existing ioctls
RISC-V:
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
s390:
- New selftests: more ucontrol selftests and CPU model sanity checks
- Support for the gen17 CPU model
- List registers supported by KVM_GET/SET_ONE_REG in the
documentation
x86:
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code,
improve documentation, harden against unexpected changes.
Even if the hardware A/D tracking is disabled, it is possible to
use the hardware-defined A/D bits to track if a PFN is Accessed
and/or Dirty, and that removes a lot of special cases.
- Elide TLB flushes when aging secondary PTEs, as has been done in
x86's primary MMU for over 10 years.
- Recover huge pages in-place in the TDP MMU when dirty page logging
is toggled off, instead of zapping them and waiting until the page
is re-accessed to create a huge mapping. This reduces vCPU jitter.
- Batch TLB flushes when dirty page logging is toggled off. This
reduces the time it takes to disable dirty logging by ~3x.
- Remove the shrinker that was (poorly) attempting to reclaim shadow
page tables in low-memory situations.
- Clean up and optimize KVM's handling of writes to
MSR_IA32_APICBASE.
- Advertise CPUIDs for new instructions in Clearwater Forest
- Quirk KVM's misguided behavior of initialized certain feature MSRs
to their maximum supported feature set, which can result in KVM
creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to
a non-zero value results in the vCPU having invalid state if
userspace hides PDCM from the guest, which in turn can lead to
save/restore failures.
- Fix KVM's handling of non-canonical checks for vCPUs that support
LA57 to better follow the "architecture", in quotes because the
actual behavior is poorly documented. E.g. most MSR writes and
descriptor table loads ignore CR4.LA57 and operate purely on
whether the CPU supports LA57.
- Bypass the register cache when querying CPL from kvm_sched_out(),
as filling the cache from IRQ context is generally unsafe; harden
the cache accessors to try to prevent similar issues from occuring
in the future. The issue that triggered this change was already
fixed in 6.12, but was still kinda latent.
- Advertise AMD_IBPB_RET to userspace, and fix a related bug where
KVM over-advertises SPEC_CTRL when trying to support cross-vendor
VMs.
- Minor cleanups
- Switch hugepage recovery thread to use vhost_task.
These kthreads can consume significant amounts of CPU time on
behalf of a VM or in response to how the VM behaves (for example
how it accesses its memory); therefore KVM tried to place the
thread in the VM's cgroups and charge the CPU time consumed by that
work to the VM's container.
However the kthreads did not process SIGSTOP/SIGCONT, and therefore
cgroups which had KVM instances inside could not complete freezing.
Fix this by replacing the kthread with a PF_USER_WORKER thread, via
the vhost_task abstraction. Another 100+ lines removed, with
generally better behavior too like having these threads properly
parented in the process tree.
- Revert a workaround for an old CPU erratum (Nehalem/Westmere) that
didn't really work; there was really nothing to work around anyway:
the broken patch was meant to fix nested virtualization, but the
PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the
erratum.
- Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is
'y'.
x86 selftests:
- x86 selftests can now use AVX.
Documentation:
- Use rST internal links
- Reorganize the introduction to the API document
Generic:
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock
instead of RCU, so that running a vCPU on a different task doesn't
encounter long due to having to wait for all CPUs become quiescent.
In general both reads and writes are rare, but userspace that
supports confidential computing is introducing the use of "helper"
vCPUs that may jump from one host processor to another. Those will
be very happy to trigger a synchronize_rcu(), and the effect on
performance is quite the disaster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits)
KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD
KVM: x86: add back X86_LOCAL_APIC dependency
Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()"
KVM: x86: switch hugepage recovery thread to vhost_task
KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR
x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest
Documentation: KVM: fix malformed table
irqchip/loongson-eiointc: Add virt extension support
LoongArch: KVM: Add irqfd support
LoongArch: KVM: Add PCHPIC user mode read and write functions
LoongArch: KVM: Add PCHPIC read and write functions
LoongArch: KVM: Add PCHPIC device support
LoongArch: KVM: Add EIOINTC user mode read and write functions
LoongArch: KVM: Add EIOINTC read and write functions
LoongArch: KVM: Add EIOINTC device support
LoongArch: KVM: Add IPI user mode read and write function
LoongArch: KVM: Add IPI read and write function
LoongArch: KVM: Add IPI device support
LoongArch: KVM: Add iocsr and mmio bus simulation in kernel
KVM: arm64: Pass on SVE mapping failures
...
|
|
Use flag output macros in inline asm to allow for better code generation if
the compiler has support for the flag output constraint.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add gen17 facilities and let KVM_CAP_S390_VECTOR_REGISTERS handle
the enablement of the vector extension facilities.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107152319.77816-4-brueckner@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107152319.77816-4-brueckner@linux.ibm.com>
|
|
Message-security-assist 11 introduces pckmo subfunctions to encrypt
hmac keys.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107152319.77816-3-brueckner@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107152319.77816-3-brueckner@linux.ibm.com>
|
|
Adding support for concurrent-functions facility which provides
additional subfunctions.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107152319.77816-2-brueckner@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107152319.77816-2-brueckner@linux.ibm.com>
|
|
The program interrupt code has some extra bits that are sometimes set
by hardware for various reasons; those bits should be ignored when the
program interrupt number is needed for interrupt handling.
Fixes: 05066cafa925 ("s390/mm/fault: Handle guest-related program interrupts in KVM")
Reported-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241031120316.25462-1-imbrenda@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The flags variable was being used uninitialized.
Initialize it to 0 as expected.
For some reason neither gcc nor clang reported a warning.
Fixes: 05066cafa925 ("s390/mm/fault: Handle guest-related program interrupts in KVM")
Reported-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241030161906.85476-1-imbrenda@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Stop using gmap_enable(), gmap_disable(), gmap_get_enabled().
The correct guest ASCE is passed as a parameter of sie64a(), there is
no need to save the current gmap in lowcore.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20241022120601.167009-7-imbrenda@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Any program interrupt that happens in the host during the execution of
a KVM guest will now short circuit the fault handler and return to KVM
immediately. Guest fault handling (including pfault) will happen
entirely inside KVM.
When sie64a() returns zero, current->thread.gmap_int_code will contain
the program interrupt number that caused the exit, or zero if the exit
was not caused by a host program interrupt.
KVM will now take care of handling all guest faults in vcpu_post_run().
Since gmap faults will not be visible by the rest of the kernel, remove
GMAP_FAULT, the linux fault handlers for secure execution faults, the
exception table entries for the sie instruction, the nop padding after
the sie instruction, and all other references to guest faults from the
s390 code.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Co-developed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20241022120601.167009-6-imbrenda@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
kvm_arch_fault_in_page() is a useless wrapper around gmap_fault(); just
use gmap_fault() directly instead.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241022120601.167009-3-imbrenda@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The __insn32_query() function incorrectly uses the RRF instruction format
for both the SORTL (RRE format) and DFLTCC (RRF format) instructions.
To fix this issue, add separate query functions for SORTL and DFLTCC that
use the appropriate instruction formats.
Additionally pass the query operand as a pointer to the entire array
of 32 elements to slightly optimize performance and readability.
Fixes: d668139718a9 ("KVM: s390: provide query function for instructions returning 32 byte")
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Hariharan Mari <hari55@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1
of the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under
KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
LoongArch:
- Add paravirt steal time support
- Add support for KVM_DIRTY_LOG_INITIALLY_SET
- Add perf kvm-stat support for loongarch
RISC-V:
- Redirect AMO load/store access fault traps to guest
- perf kvm stat support
- Use guest files for IMSIC virtualization, when available
s390:
- Assortment of tiny fixes which are not time critical
x86:
- Fixes for Xen emulation
- Add a global struct to consolidate tracking of host values, e.g.
EFER
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the
effective APIC bus frequency, because TDX
- Print the name of the APICv/AVIC inhibits in the relevant
tracepoint
- Clean up KVM's handling of vendor specific emulation to
consistently act on "compatible with Intel/AMD", versus checking
for a specific vendor
- Drop MTRR virtualization, and instead always honor guest PAT on
CPUs that support self-snoop
- Update to the newfangled Intel CPU FMS infrastructure
- Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as
it reads '0' and writes from userspace are ignored
- Misc cleanups
x86 - MMU:
- Small cleanups, renames and refactoring extracted from the upcoming
Intel TDX support
- Don't allocate kvm_mmu_page.shadowed_translation for shadow pages
that can't hold leafs SPTEs
- Unconditionally drop mmu_lock when allocating TDP MMU page tables
for eager page splitting, to avoid stalling vCPUs when splitting
huge pages
- Bug the VM instead of simply warning if KVM tries to split a SPTE
that is non-present or not-huge. KVM is guaranteed to end up in a
broken state because the callers fully expect a valid SPTE, it's
all but dangerous to let more MMU changes happen afterwards
x86 - AMD:
- Make per-CPU save_area allocations NUMA-aware
- Force sev_es_host_save_area() to be inlined to avoid calling into
an instrumentable function from noinstr code
- Base support for running SEV-SNP guests. API-wise, this includes a
new KVM_X86_SNP_VM type, encrypting/measure the initial image into
guest memory, and finalizing it before launching it. Internally,
there are some gmem/mmu hooks needed to prepare gmem-allocated
pages before mapping them into guest private memory ranges
This includes basic support for attestation guest requests, enough
to say that KVM supports the GHCB 2.0 specification
There is no support yet for loading into the firmware those signing
keys to be used for attestation requests, and therefore no need yet
for the host to provide certificate data for those keys.
To support fetching certificate data from userspace, a new KVM exit
type will be needed to handle fetching the certificate from
userspace.
An attempt to define a new KVM_EXIT_COCO / KVM_EXIT_COCO_REQ_CERTS
exit type to handle this was introduced in v1 of this patchset, but
is still being discussed by community, so for now this patchset
only implements a stub version of SNP Extended Guest Requests that
does not provide certificate data
x86 - Intel:
- Remove an unnecessary EPT TLB flush when enabling hardware
- Fix a series of bugs that cause KVM to fail to detect nested
pending posted interrupts as valid wake eents for a vCPU executing
HLT in L2 (with HLT-exiting disable by L1)
- KVM: x86: Suppress MMIO that is triggered during task switch
emulation
Explicitly suppress userspace emulated MMIO exits that are
triggered when emulating a task switch as KVM doesn't support
userspace MMIO during complex (multi-step) emulation
Silently ignoring the exit request can result in the
WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to userspace
for some other reason prior to purging mmio_needed
See commit 0dc902267cb3 ("KVM: x86: Suppress pending MMIO write
exits if emulator detects exception") for more details on KVM's
limitations with respect to emulated MMIO during complex emulator
flows
Generic:
- Rename the AS_UNMOVABLE flag that was introduced for KVM to
AS_INACCESSIBLE, because the special casing needed by these pages
is not due to just unmovability (and in fact they are only
unmovable because the CPU cannot access them)
- New ioctl to populate the KVM page tables in advance, which is
useful to mitigate KVM page faults during guest boot or after live
migration. The code will also be used by TDX, but (probably) not
through the ioctl
- Enable halt poll shrinking by default, as Intel found it to be a
clear win
- Setup empty IRQ routing when creating a VM to avoid having to
synchronize SRCU when creating a split IRQCHIP on x86
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with
a flag that arch code can use for hooking both sched_in() and
sched_out()
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace
detect bugs
- Mark a vCPU as preempted if and only if it's scheduled out while in
the KVM_RUN loop, e.g. to avoid marking it preempted and thus
writing guest memory when retrieving guest state during live
migration blackout
Selftests:
- Remove dead code in the memslot modification stress test
- Treat "branch instructions retired" as supported on all AMD Family
17h+ CPUs
- Print the guest pseudo-RNG seed only when it changes, to avoid
spamming the log for tests that create lots of VMs
- Make the PMU counters test less flaky when counting LLC cache
misses by doing CLFLUSH{OPT} in every loop iteration"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
crypto: ccp: Add the SNP_VLEK_LOAD command
KVM: x86/pmu: Add kvm_pmu_call() to simplify static calls of kvm_pmu_ops
KVM: x86: Introduce kvm_x86_call() to simplify static calls of kvm_x86_ops
KVM: x86: Replace static_call_cond() with static_call()
KVM: SEV: Provide support for SNP_EXTENDED_GUEST_REQUEST NAE event
x86/sev: Move sev_guest.h into common SEV header
KVM: SEV: Provide support for SNP_GUEST_REQUEST NAE event
KVM: x86: Suppress MMIO that is triggered during task switch emulation
KVM: x86/mmu: Clean up make_huge_page_split_spte() definition and intro
KVM: x86/mmu: Bug the VM if KVM tries to split a !hugepage SPTE
KVM: selftests: x86: Add test for KVM_PRE_FAULT_MEMORY
KVM: x86: Implement kvm_arch_vcpu_pre_fault_memory()
KVM: x86/mmu: Make kvm_mmu_do_page_fault() return mapped level
KVM: x86/mmu: Account pf_{fixed,emulate,spurious} in callers of "do page fault"
KVM: x86/mmu: Bump pf_taken stat only in the "real" page fault handler
KVM: Add KVM_PRE_FAULT_MEMORY vcpu ioctl to pre-populate guest memory
KVM: Document KVM_PRE_FAULT_MEMORY ioctl
mm, virt: merge AS_UNMOVABLE and AS_INACCESSIBLE
perf kvm: Add kvm-stat for loongarch64
LoongArch: KVM: Add PV steal time support in guest side
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Remove restrictions on PAI NNPA and crypto counters, enabling
concurrent per-task and system-wide sampling and counting events
- Switch to GENERIC_CPU_DEVICES by setting up the CPU present mask in
the architecture code and letting the generic code handle CPU
bring-up
- Add support for the diag204 busy indication facility to prevent
undesirable blocking during hypervisor logical CPU utilization
queries. Implement results caching
- Improve the handling of Store Data SCLP events by suppressing
unnecessary warning, preventing buffer release in I/O during
failures, and adding timeout handling for Store Data requests to
address potential firmware issues
- Provide optimized __arch_hweight*() implementations
- Remove the unnecessary CPU KOBJ_CHANGE uevents generated during
topology updates, as they are unused and also not present on other
architectures
- Cleanup atomic_ops, optimize __atomic_set() for small values and
__atomic_cmpxchg_bool() for compilers supporting flag output
constraint
- Couple of cleanups for KVM:
- Move and improve KVM struct definitions for DAT tables from
gaccess.c to a new header
- Pass the asce as parameter to sie64a()
- Make the crdte() and cspg() page table handling wrappers return a
boolean to indicate success, like the other existing "compare and
swap" wrappers
- Add documentation for HWCAP flags
- Switch to obtaining total RAM pages from memblock instead of
totalram_pages() during mm init, to ensure correct calculation of
zero page size, when defer_init is enabled
- Refactor lowcore access and switch to using the get_lowcore()
function instead of the S390_lowcore macro
- Cleanups for PG_arch_1 and folio handling in UV and hugetlb code
- Add missing MODULE_DESCRIPTION() macros
- Fix VM_FAULT_HWPOISON handling in do_exception()
* tag 's390-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits)
s390/mm: Fix VM_FAULT_HWPOISON handling in do_exception()
s390/kvm: Move bitfields for dat tables
s390/entry: Pass the asce as parameter to sie64a()
s390/sthyi: Use cached data when diag is busy
s390/sthyi: Move diag operations
s390/hypfs_diag: Diag204 busy loop
s390/diag: Add busy-indication-facility requirements
s390/diag: Diag204 add busy return errno
s390/diag: Return errno's from diag204
s390/sclp: Diag204 busy indication facility detection
s390/atomic_ops: Make use of flag output constraint
s390/atomic_ops: Improve __atomic_set() for small values
s390/atomic_ops: Use symbolic names
s390/smp: Switch to GENERIC_CPU_DEVICES
s390/hwcaps: Add documentation for HWCAP flags
s390/pgtable: Make crdte() and cspg() return a value
s390/topology: Remove CPU KOBJ_CHANGE uevents
s390/sclp: Add timeout to Store Data requests
s390/sclp: Prevent release of buffer in I/O
s390/sclp: Suppress unnecessary Store Data warning
...
|
|
KVM generic changes for 6.11
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.11
1. Add ParaVirt steal time support.
2. Add some VM migration enhancement.
3. Add perf kvm-stat support for loongarch.
|
|
Pass the guest ASCE explicitly as parameter, instead of having sie64a()
take it from lowcore.
This removes hidden state from lowcore, and makes things look cleaner.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/r/20240703155900.103783-2-imbrenda@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
This change rejects the KVM_SET_USER_MEMORY_REGION and
KVM_SET_USER_MEMORY_REGION2 ioctls when called on a ucontrol VM.
This is necessary since ucontrol VMs have kvm->arch.gmap set to 0 and
would thus result in a null pointer dereference further in.
Memory management needs to be performed in userspace and using the
ioctls KVM_S390_UCAS_MAP and KVM_S390_UCAS_UNMAP.
Also improve s390 specific documentation for KVM_SET_USER_MEMORY_REGION
and KVM_SET_USER_MEMORY_REGION2.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Fixes: 27e0393f15fc ("KVM: s390: ucontrol: per vcpu address spaces")
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20240624095902.29375-1-schlameuss@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
[frankja@linux.ibm.com: commit message spelling fix, subject prefix fix]
Message-ID: <20240624095902.29375-1-schlameuss@linux.ibm.com>
|
|
in rare cases, e.g. for injecting a machine check we do intercept all
load PSW instructions via ICTL_LPSW. With facility 193 a new variant
LPSWEY was added. KVM needs to handle that as well.
Fixes: a3efa8429266 ("KVM: s390: gen_facilities: allow facilities 165, 193, 194 and 196")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-ID: <20240628163547.2314-1-borntraeger@linux.ibm.com>
|
|
Introduce vcpu->wants_to_run to indicate when a vCPU is in its core run
loop, i.e. when the vCPU is running the KVM_RUN ioctl and immediate_exit
was not set.
Replace all references to vcpu->run->immediate_exit with
!vcpu->wants_to_run to avoid TOCTOU races with userspace. For example, a
malicious userspace could invoked KVM_RUN with immediate_exit=true and
then after KVM reads it to set wants_to_run=false, flip it to false.
This would result in the vCPU running in KVM_RUN with
wants_to_run=false. This wouldn't cause any real bugs today but is a
dangerous landmine.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240503181734.1467938-2-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Replace all S390_lowcore usages in arch/s390/ by get_lowcore().
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Now that KVM sets up empty irq routing in kvm_create_vm(), there's
no need to setup dummy routing when KVM_CREATE_IRQCHIP.
Note, userspace could very theoretically use KVM_CREATE_IRQCHIP after
KVM_SET_GSI_ROUTING to reset to empty IRQ routing, but it's extremely
unlikely any VMM does that, e.g. the main reason s390 does anything for
KVM_CREATE_IRQCHIP is to that s390 doesn't need to be special cased by the
VMM.
Signed-off-by: Yi Wang <foxywang@tencent.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20240506101751.3145407-4-foxywang@tencent.com
[sean: keep use_irqchip check, call out KVM_SET_GSI_ROUTING impact]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Store AP Query Configuration Information in a static buffer
- Rework the AP initialization and add missing cleanups to the error
path
- Swap IRQ and AP bus/device registration to avoid race conditions
- Export prot_virt_guest symbol
- Introduce AP configuration changes notifier interface to facilitate
modularization of the AP bus
- Add CONFIG_AP kernel configuration option to allow modularization of
the AP bus
- Rework CONFIG_ZCRYPT_DEBUG kernel configuration option description
and dependency and rename it to CONFIG_AP_DEBUG
- Convert sprintf() and snprintf() to sysfs_emit() in CIO code
- Adjust indentation of RELOCS command build step
- Make crypto performance counters upward compatible
- Convert make_page_secure() and gmap_make_secure() to use folio
- Rework channel-utilization-block (CUB) handling in preparation of
introducing additional CUBs
- Use attribute groups to simplify registration, removal and extension
of measurement-related channel-path sysfs attributes
- Add a per-channel-path binary "ext_measurement" sysfs attribute that
provides access to extended channel-path measurement data
- Export measurement data for all channel-measurement-groups (CMG), not
only for a specific ones. This enables support of new CMG data
formats in userspace without the need for kernel changes
- Add a per-channel-path sysfs attribute "speed_bps" that provides the
operating speed in bits per second or 0 if the operating speed is not
available
- The CIO tracepoint subchannel-type field "st" is incorrectly set to
the value of subchannel-enabled SCHIB "ena" field. Fix that
- Do not forcefully limit vmemmap starting address to MAX_PHYSMEM_BITS
- Consider the maximum physical address available to a DCSS segment
(512GB) when memory layout is set up
- Simplify the virtual memory layout setup by reducing the size of
identity mapping vs vmemmap overlap
- Swap vmalloc and Lowcore/Real Memory Copy areas in virtual memory.
This will allow to place the kernel image next to kernel modules
- Move everyting KASLR related from <asm/setup.h> to <asm/page.h>
- Put virtual memory layout information into a structure to improve
code generation
- Currently __kaslr_offset is the kernel offset in both physical and
virtual memory spaces. Uncouple these offsets to allow uncoupling of
the addresses spaces
- Currently the identity mapping base address is implicit and is always
set to zero. Make it explicit by putting into __identity_base
persistent boot variable and use it in proper context
- Introduce .amode31 section start and end macros AMODE31_START and
AMODE31_END
- Introduce OS_INFO entries that do not reference any data in memory,
but rather provide only values
- Store virtual memory layout in OS_INFO. It is read out by
makedumpfile, crash and other tools
- Store virtual memory layout in VMCORE_INFO. It is read out by crash
and other tools when /proc/kcore device is used
- Create additional PT_LOAD ELF program header that covers kernel image
only, so that vmcore tools could locate kernel text and data when
virtual and physical memory spaces are uncoupled
- Uncouple physical and virtual address spaces
- Map kernel at fixed location when KASLR mode is disabled. The
location is defined by CONFIG_KERNEL_IMAGE_BASE kernel configuration
value.
- Rework deployment of kernel image for both compressed and
uncompressed variants as defined by CONFIG_KERNEL_UNCOMPRESSED kernel
configuration value
- Move .vmlinux.relocs section in front of the compressed kernel. The
interim section rescue step is avoided as result
- Correct modules thunk offset calculation when branch target is more
than 2GB away
- Kernel modules contain their own set of expoline thunks. Now that the
kernel modules area is less than 4GB away from kernel expoline
thunks, make modules use kernel expolines. Also make EXPOLINE_EXTERN
the default if the compiler supports it
- userfaultfd can insert shared zeropages into processes running VMs,
but that is not allowed for s390. Fallback to allocating a fresh
zeroed anonymous folio and insert that instead
- Re-enable shared zeropages for non-PV and non-skeys KVM guests
- Rename hex2bitmap() to ap_hex2bitmap() and export it for external use
- Add ap_config sysfs attribute to provide the means for setting or
displaying adapters, domains and control domains assigned to a
vfio-ap mediated device in a single operation
- Make vfio_ap_mdev_link_queue() ignore duplicate link requests
- Add write support to ap_config sysfs attribute to allow atomic update
a vfio-ap mediated device state
- Document ap_config sysfs attribute
- Function os_info_old_init() is expected to be called only from a
regular kdump kernel. Enable it to be called from a stand-alone dump
kernel
- Address gcc -Warray-bounds warning and fix array size in struct
os_info
- s390 does not support SMBIOS, so drop unneeded CONFIG_DMI checks
- Use unwinder instead of __builtin_return_address() with ftrace to
prevent returning of undefined values
- Sections .hash and .gnu.hash are only created when CONFIG_PIE_BUILD
kernel is enabled. Drop these for the case CONFIG_PIE_BUILD is
disabled
- Compile kernel with -fPIC and link with -no-pie to allow kpatch
feature always succeed and drop the whole CONFIG_PIE_BUILD
option-enabled code
- Add missing virt_to_phys() converter for VSIE facility and crypto
control blocks
* tag 's390-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits)
Revert "s390: Relocate vmlinux ELF data to virtual address space"
KVM: s390: vsie: Use virt_to_phys for crypto control block
s390: Relocate vmlinux ELF data to virtual address space
s390: Compile kernel with -fPIC and link with -no-pie
s390: vmlinux.lds.S: Drop .hash and .gnu.hash for !CONFIG_PIE_BUILD
s390/ftrace: Use unwinder instead of __builtin_return_address()
s390/pci: Drop unneeded reference to CONFIG_DMI
s390/os_info: Fix array size in struct os_info
s390/os_info: Initialize old os_info in standalone dump kernel
docs: Update s390 vfio-ap doc for ap_config sysfs attribute
s390/vfio-ap: Add write support to sysfs attr ap_config
s390/vfio-ap: Ignore duplicate link requests in vfio_ap_mdev_link_queue
s390/vfio-ap: Add sysfs attr, ap_config, to export mdev state
s390/ap: Externalize AP bus specific bitmap reading function
s390/mm: Re-enable the shared zeropage for !PV and !skeys KVM guests
mm/userfaultfd: Do not place zeropages when zeropages are disallowed
s390/expoline: Make modules use kernel expolines
s390/nospec: Correct modules thunk offset calculation
s390/boot: Do not rescue .vmlinux.relocs section
s390/boot: Rework deployment of the kernel image
...
|
|
KVM allows issuing the KVM_CHECK_EXTENSION ioctl either on the /dev/kvm
fd or the VM fd. In the first case, kvm_vm_ioctl_check_extension() is
called with kvm==NULL. Ensure we don't dereference the pointer in that
case.
Fixes: 40ebdb8e59df ("KVM: s390: Make huge pages unavailable in ucontrol VMs")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-ID: <20240419160723.320910-2-jean-philippe@linaro.org>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
commit fa41ba0d08de ("s390/mm: avoid empty zero pages for KVM guests to
avoid postcopy hangs") introduced an undesired side effect when combined
with memory ballooning and VM migration: memory part of the inflated
memory balloon will consume memory.
Assuming we have a 100GiB VM and inflated the balloon to 40GiB. Our VM
will consume ~60GiB of memory. If we now trigger a VM migration,
hypervisors like QEMU will read all VM memory. As s390x does not support
the shared zeropage, we'll end up allocating for all previously-inflated
memory part of the memory balloon: 50 GiB. So we might easily
(unexpectedly) crash the VM on the migration source.
Even worse, hypervisors like QEMU optimize for zeropage migration to not
consume memory on the migration destination: when migrating a
"page full of zeroes", on the migration destination they check whether the
target memory is already zero (by reading the destination memory) and avoid
writing to the memory to not allocate memory: however, s390x will also
allocate memory here, implying that also on the migration destination, we
will end up allocating all previously-inflated memory part of the memory
balloon.
This is especially bad if actual memory overcommit was not desired, when
memory ballooning is used for dynamic VM memory resizing, setting aside
some memory during boot that can be added later on demand. Alternatives
like virtio-mem that would avoid this issue are not yet available on
s390x.
There could be ways to optimize some cases in user space: before reading
memory in an anonymous private mapping on the migration source, check via
/proc/self/pagemap if anything is already populated. Similarly check on
the migration destination before reading. While that would avoid
populating tables full of shared zeropages on all architectures, it's
harder to get right and performant, and requires user space changes.
Further, with posctopy live migration we must place a page, so there,
"avoid touching memory to avoid allocating memory" is not really
possible. (Note that a previously we would have falsely inserted
shared zeropages into processes using UFFDIO_ZEROPAGE where
mm_forbids_zeropage() would have actually forbidden it)
PV is currently incompatible with memory ballooning, and in the common
case, KVM guests don't make use of storage keys. Instead of zapping
zeropages when enabling storage keys / PV, that turned out to be
problematic in the past, let's do exactly the same we do with KSM pages:
trigger unsharing faults to replace the shared zeropages by proper
anonymous folios.
What about added latency when enabling storage kes? Having a lot of
zeropages in applicable environments (PV, legacy guests, unittests) is
unexpected. Further, KSM could today already unshare the zeropages
and unmerging KSM pages when enabling storage kets would unshare the
KSM-placed zeropages in the same way, resulting in the same latency.
[ agordeev: Fixed sparse and checkpatch complaints and error handling ]
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Fixes: fa41ba0d08de ("s390/mm: avoid empty zero pages for KVM guests to avoid postcopy hangs")
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240411161441.910170-3-david@redhat.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Pull kvm updates from Paolo Bonzini:
"S390:
- Changes to FPU handling came in via the main s390 pull request
- Only deliver to the guest the SCLP events that userspace has
requested
- More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same)
- Fix selftests undefined behavior
x86:
- Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can
be programmed *using the architectural encoding*. The enumeration
does NOT say anything about the encoding when the CPU doesn't
report support the event *in general*. It might support it, and it
might support it using the same encoding that made it into the
architectural PMU spec
- Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly
emulates RDMPC, counter availability, and a variety of other
PMC-related behaviors that depend on guest CPUID and therefore are
easier to validate with selftests than with custom guests (aka
kvm-unit-tests)
- Zero out PMU state on AMD if the virtual PMU is disabled, it does
not cause any bug but it wastes time in various cases where KVM
would check if a PMC event needs to be synthesized
- Optimize triggering of emulated events, with a nice ~10%
performance improvement in VM-Exit microbenchmarks when a vPMU is
exposed to the guest
- Tighten the check for "PMI in guest" to reduce false positives if
an NMI arrives in the host while KVM is handling an IRQ VM-Exit
- Fix a bug where KVM would report stale/bogus exit qualification
information when exiting to userspace with an internal error exit
code
- Add a VMX flag in /proc/cpuinfo to report 5-level EPT support
- Rework TDP MMU root unload, free, and alloc to run with mmu_lock
held for read, e.g. to avoid serializing vCPUs when userspace
deletes a memslot
- Tear down TDP MMU page tables at 4KiB granularity (used to be
1GiB). KVM doesn't support yielding in the middle of processing a
zap, and 1GiB granularity resulted in multi-millisecond lags that
are quite impolite for CONFIG_PREEMPT kernels
- Allocate write-tracking metadata on-demand to avoid the memory
overhead when a kernel is built with i915 virtualization support
but the workloads use neither shadow paging nor i915 virtualization
- Explicitly initialize a variety of on-stack variables in the
emulator that triggered KMSAN false positives
- Fix the debugregs ABI for 32-bit KVM
- Rework the "force immediate exit" code so that vendor code
ultimately decides how and when to force the exit, which allowed
some optimization for both Intel and AMD
- Fix a long-standing bug where kvm_has_noapic_vcpu could be left
elevated if vCPU creation ultimately failed, causing extra
unnecessary work
- Cleanup the logic for checking if the currently loaded vCPU is
in-kernel
- Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere
in the kernel) are detected earlier and are less likely to hang the
kernel
x86 Xen emulation:
- Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the gpa
but the underlying host virtual address remains the same
- When possible, use a single host TSC value when computing the
deadline for Xen timers in order to improve the accuracy of the
timer emulation
- Inject pending upcall events when the vCPU software-enables its
APIC to fix a bug where an upcall can be lost (and to follow Xen's
behavior)
- Fall back to the slow path instead of warning if "fast" IRQ
delivery of Xen events fails, e.g. if the guest has aliased xAPIC
IDs
RISC-V:
- Support exception and interrupt handling in selftests
- New self test for RISC-V architectural timer (Sstc extension)
- New extension support (Ztso, Zacas)
- Support userspace emulation of random number seed CSRs
ARM:
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized
to address serialization some of the serialization on the LPI
injection path
- Support for _architectural_ VHE-only systems, advertised through
the absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
- Set reserved bits as zero in CPUCFG
- Start SW timer only when vcpu is blocking
- Do not restart SW timer when it is expired
- Remove unnecessary CSR register saving during enter guest
- Misc cleanups and fixes as usual
Generic:
- Clean up Kconfig by removing CONFIG_HAVE_KVM, which was basically
always true on all architectures except MIPS (where Kconfig
determines the available depending on CPU capabilities). It is
replaced either by an architecture-dependent symbol for MIPS, and
IS_ENABLED(CONFIG_KVM) everywhere else
- Factor common "select" statements in common code instead of
requiring each architecture to specify it
- Remove thoroughly obsolete APIs from the uapi headers
- Move architecture-dependent stuff to uapi/asm/kvm.h
- Always flush the async page fault workqueue when a work item is
being removed, especially during vCPU destruction, to ensure that
there are no workers running in KVM code when all references to
KVM-the-module are gone, i.e. to prevent a very unlikely
use-after-free if kvm.ko is unloaded
- Grab a reference to the VM's mm_struct in the async #PF worker
itself instead of gifting the worker a reference, so that there's
no need to remember to *conditionally* clean up after the worker
Selftests:
- Reduce boilerplate especially when utilize selftest TAP
infrastructure
- Add basic smoke tests for SEV and SEV-ES, along with a pile of
library support for handling private/encrypted/protected memory
- Fix benign bugs where tests neglect to close() guest_memfd files"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
selftests: kvm: remove meaningless assignments in Makefiles
KVM: riscv: selftests: Add Zacas extension to get-reg-list test
RISC-V: KVM: Allow Zacas extension for Guest/VM
KVM: riscv: selftests: Add Ztso extension to get-reg-list test
RISC-V: KVM: Allow Ztso extension for Guest/VM
RISC-V: KVM: Forward SEED CSR access to user space
KVM: riscv: selftests: Add sstc timer test
KVM: riscv: selftests: Change vcpu_has_ext to a common function
KVM: riscv: selftests: Add guest helper to get vcpu id
KVM: riscv: selftests: Add exception handling support
LoongArch: KVM: Remove unnecessary CSR register saving during enter guest
LoongArch: KVM: Do not restart SW timer when it is expired
LoongArch: KVM: Start SW timer only when vcpu is blocking
LoongArch: KVM: Set reserved bits as zero in CPUCFG
KVM: selftests: Explicitly close guest_memfd files in some gmem tests
KVM: x86/xen: fix recursive deadlock in timer injection
KVM: pfncache: simplify locking and make more self-contained
KVM: x86/xen: remove WARN_ON_ONCE() with false positives in evtchn delivery
KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled
KVM: x86/xen: improve accuracy of Xen timers
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- Memop selftest rotate fix
- SCLP event bits over indication fix
- Missing virt_to_phys for the CRYCB fix
|
|
The routine ar_translation() can be reached by both the instruction
intercept path (where the access registers had been loaded with the
guest register contents), and the MEM_OP ioctls (which hadn't).
Since this routine saves the current registers to vcpu->run,
this routine erroneously saves host registers into the guest space.
Introduce a boolean in the kvm_vcpu_arch struct to indicate whether
the registers contain guest contents. If they do (the instruction
intercept path), the save can be performed and the AR translation
is done just as it is today. If they don't (the MEM_OP path), the
AR can be read from vcpu->run without stashing the current contents.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20240220211211.3102609-2-farman@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
It's a bit nicer than having multiple lines and will help if there's
another re-work since we'll only have to change one location.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
