| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.17, round #1
- Host driver for GICv5, the next generation interrupt controller for
arm64, including support for interrupt routing, MSIs, interrupt
translation and wired interrupts.
- Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on
GICv5 hardware, leveraging the legacy VGIC interface.
- Userspace control of the 'nASSGIcap' GICv3 feature, allowing
userspace to disable support for SGIs w/o an active state on hardware
that previously advertised it unconditionally.
- Map supporting endpoints with cacheable memory attributes on systems
with FEAT_S2FWB and DIC where KVM no longer needs to perform cache
maintenance on the address range.
- Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest
hypervisor to inject external aborts into an L2 VM and take traps of
masked external aborts to the hypervisor.
- Convert more system register sanitization to the config-driven
implementation.
- Fixes to the visibility of EL2 registers, namely making VGICv3 system
registers accessible through the VGIC device instead of the ONE_REG
vCPU ioctls.
- Various cleanups and minor fixes.
|
|
KVM IRQ changes for 6.17
- Rework irqbypass to track/match producers and consumers via an xarray
instead of a linked list. Using a linked list leads to O(n^2) insertion
times, which is hugely problematic for use cases that create large numbers
of VMs. Such use cases typically don't actually use irqbypass, but
eliminating the pointless registration is a future problem to solve as it
likely requires new uAPI.
- Track irqbypass's "token" as "struct eventfd_ctx *" instead of a "void *",
to avoid making a simple concept unnecessarily difficult to understand.
- Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O APIC, PIC,
and PIT emulation at compile time.
- Drop x86's irq_comm.c, and move a pile of IRQ related code into irq.c.
- Fix a variety of flaws and bugs in the AVIC device posted IRQ code.
- Inhibited AVIC if a vCPU's ID is too big (relative to what hardware
supports) instead of rejecting vCPU creation.
- Extend enable_ipiv module param support to SVM, by simply leaving IsRunning
clear in the vCPU's physical ID table entry.
- Disable IPI virtualization, via enable_ipiv, if the CPU is affected by
erratum #1235, to allow (safely) enabling AVIC on such CPUs.
- Dedup x86's device posted IRQ code, as the vast majority of functionality
can be shared verbatime between SVM and VMX.
- Harden the device posted IRQ code against bugs and runtime errors.
- Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups O(1)
instead of O(n).
- Generate GA Log interrupts if and only if the target vCPU is blocking, i.e.
only if KVM needs a notification in order to wake the vCPU.
- Decouple device posted IRQs from VFIO device assignment, as binding a VM to
a VFIO group is not a requirement for enabling device posted IRQs.
- Clean up and document/comment the irqfd assignment code.
- Disallow binding multiple irqfds to an eventfd with a priority waiter, i.e.
ensure an eventfd is bound to at most one irqfd through the entire host,
and add a selftest to verify eventfd:irqfd bindings are globally unique.
|
|
* kvm-arm64/vgic-v4-ctl:
: Userspace control of nASSGIcap, courtesy of Raghavendra Rao Ananta
:
: Allow userspace to decide if support for SGIs without an active state is
: advertised to the guest, allowing VMs from GICv3-only hardware to be
: migrated to to GICv4.1 capable machines.
Documentation: KVM: arm64: Describe VGICv3 registers writable pre-init
KVM: arm64: selftests: Add test for nASSGIcap attribute
KVM: arm64: vgic-v3: Allow userspace to write GICD_TYPER2.nASSGIcap
KVM: arm64: vgic-v3: Allow access to GICD_IIDR prior to initialization
KVM: arm64: vgic-v3: Consolidate MAINT_IRQ handling
KVM: arm64: Disambiguate support for vSGIs v. vLPIs
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/el2-reg-visibility:
: Fixes to EL2 register visibility, courtesy of Marc Zyngier
:
: - Expose EL2 VGICv3 registers via the VGIC attributes accessor, not the
: KVM_{GET,SET}_ONE_REG ioctls
:
: - Condition visibility of FGT registers on the presence of FEAT_FGT in
: the VM
KVM: arm64: selftest: vgic-v3: Add basic GICv3 sysreg userspace access test
KVM: arm64: Enforce the sorting of the GICv3 system register table
KVM: arm64: Clarify the check for reset callback in check_sysreg_table()
KVM: arm64: vgic-v3: Fix ordering of ICH_HCR_EL2
KVM: arm64: Document registers exposed via KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS
KVM: arm64: selftests: get-reg-list: Add base EL2 registers
KVM: arm64: selftests: get-reg-list: Simplify feature dependency
KVM: arm64: Advertise FGT2 registers to userspace
KVM: arm64: Condition FGT registers on feature availability
KVM: arm64: Expose GICv3 EL2 registers via KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS
KVM: arm64: Let GICv3 save/restore honor visibility attribute
KVM: arm64: Define helper for ICH_VTR_EL2
KVM: arm64: Define constant value for ICC_SRE_EL2
KVM: arm64: Don't advertise ICH_*_EL2 registers through GET_ONE_REG
KVM: arm64: Make RVBAR_EL2 accesses UNDEF
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/misc:
: Miscellaneous fixes/cleanups for KVM/arm64
:
: - Fixes for computing POE output permissions
:
: - Return ENXIO for invalid VGIC device attribute
:
: - String helper conversions
arm64: kvm: trace_handle_exit: use string choices helper
arm64: kvm: sys_regs: use string choices helper
KVM: arm64: Follow specification when implementing WXN
KVM: arm64: Remove the wi->{e0,}poe vs wr->{p,u}ov confusion
KVM: arm64: vgic-its: Return -ENXIO to invalid KVM_DEV_ARM_VGIC_GRP_CTRL attrs
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/gcie-legacy:
: Support for GICv3 emulation on GICv5, courtesy of Sascha Bischoff
:
: FEAT_GCIE_LEGACY adds the necessary hardware for GICv5 systems to
: support the legacy GICv3 for VMs, including a backwards-compatible VGIC
: implementation that we all know and love.
:
: As a starting point for GICv5 enablement in KVM, enable + use the
: GICv3-compatible feature when running VMs on GICv5 hardware.
KVM: arm64: gic-v5: Probe for GICv5
KVM: arm64: gic-v5: Support GICv3 compat
arm64/sysreg: Add ICH_VCTLR_EL2
irqchip/gic-v5: Populate struct gic_kvm_info
irqchip/gic-v5: Skip deactivate for forwarded PPI interrupts
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
KVM unconditionally advertises GICD_TYPER2.nASSGIcap (which internally
implies vSGIs) on GICv4.1 systems. Allow userspace to change whether a
VM supports the feature. Only allow changes prior to VGIC initialization
as at that point vPEs need to be allocated for the VM.
For convenience, bundle support for vLPIs and vSGIs behind this feature,
allowing userspace to control vPE allocation for VMs in environments
that may be constrained on vPE IDs.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250724062805.2658919-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
KVM allows userspace to write GICD_IIDR for backwards-compatibility with
older kernels, where new implementation revisions have new features.
Unfortunately this is allowed to happen at runtime, and ripping features
out from underneath a running guest is a terrible idea.
While we can't do anything about the ABI, prepare for more ID-like
registers by allowing access to GICD_IIDR prior to VGIC initialization.
Hoist initializaiton of the default value to kvm_vgic_create() and
discard the incorrect comment that assumed userspace could access the
register before initialization (until now).
Subsequent changes will allow the VMM to further provision the GIC
feature set, e.g. the presence of nASSGIcap.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250724062805.2658919-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Consolidate the duplicated handling of the VGICv3 maintenance IRQ
attribute as a regular GICv3 attribute, as it is neither a register nor
a common attribute. As this is now handled separately from the VGIC
registers, the locking is relaxed to only acquire the intended
config_lock.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250724062805.2658919-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
vgic_supports_direct_msis() is a bit of a misnomer, as it returns true
if either vSGIs or vLPIs are supported. Pick it apart into a few
predicates and replace some open-coded checks for vSGIs, including an
opportunistic fix to always check if the CPUIF is capable of handling
vSGIs.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250724062805.2658919-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
In order to avoid further embarassing bugs, enforce that the GICv3
sysreg table is actually sorted, just like all the other tables.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250718111154.104029-4-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
A preliminary version of a hack to invoke unmap_all_vpes() from an ioctl
didn't work very well. We eventually determined this was because we were
invoking it on the wrong file descriptor, but not getting an error.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/bbbddd56135399baf699bc46ffb6e7f08d9f8c9f.camel@infradead.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Move the computation of the ICH_VTR_EL2 value to a common location,
so that it can be reused by the save/restore code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250714122634.3334816-5-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Move the bag of bits defining the value of ICC_SRE_EL2 to a common
spot so that it can be reused by the save/restore code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250714122634.3334816-4-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add in a probe function for GICv5 which enables support for GICv3
guests on a GICv5 host, if FEAT_GCIE_LEGACY is supported by the
hardware.
Co-authored-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://lore.kernel.org/r/20250627100847.1022515-6-sascha.bischoff@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add support for GICv3 compat mode (FEAT_GCIE_LEGACY) which allows a
GICv5 host to run GICv3-based VMs. This change enables the
VHE/nVHE/hVHE/protected modes, but does not support nested
virtualization.
A lazy-disable approach is taken for compat mode; it is enabled on the
vgic_v3_load path but not disabled on the vgic_v3_put path. A
non-GICv3 VM, i.e., one based on GICv5, is responsible for disabling
compat mode on the corresponding vgic_v5_load path. Currently, GICv5
is not supported, and hence compat mode is not disabled again once it
is enabled, and this function is intentionally omitted from the code.
Co-authored-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://lore.kernel.org/r/20250627100847.1022515-5-sascha.bischoff@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
A common idiom in the KVM code is to check if we are currently
dealing with a "nested" context, defined as having NV enabled,
but being in the EL1&0 translation regime.
This is usually expressed as:
if (vcpu_has_nv(vcpu) && !is_hyp_ctxt(vcpu) ... )
which is a mouthful and a bit hard to read, specially when followed
by additional conditions.
Introduce a new helper that encapsulate these two terms, allowing
the above to be written as
if (is_nested_context(vcpu) ... )
which is both shorter and easier to read, and makes more obvious
the potential for simplification on some code paths.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250708172532.1699409-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The state of the vcpu's MI line should be asserted when its
ICH_HCR_EL2.En is set and ICH_MISR_EL2 is non-zero. Using bitwise AND
(&=) directly for this calculation will not give us the correct result
when the LSB of the vcpu's ICH_MISR_EL2 isn't set. Correct this by
directly computing the line level with a logical AND operation.
Signed-off-by: Wei-Lin Chang <r09922117@csie.ntu.edu.tw>
Link: https://lore.kernel.org/r/20250625084709.3968844-1-r09922117@csie.ntu.edu.tw
[maz: drop the level check from the original code]
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Don't bother WARNing if updating an IRTE route fails now that vendor code
provides much more precise WARNs. The generic WARN doesn't provide enough
information to actually debug the problem, and has obviously done nothing
to surface the myriad bugs in KVM x86's implementation.
Drop all of the associated return code plumbing that existed just so that
common KVM could WARN.
Link: https://lore.kernel.org/r/20250611224604.313496-34-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When unmapping a vLPI, WARN if nullifying vCPU affinity fails, not just if
failure occurs when freeing an ITE. If undoing vCPU affinity fails, then
odds are very good that vLPI state tracking has has gotten out of whack,
i.e. that KVM and the GIC disagree on the state of an IRQ/vLPI. At best,
inconsistent state means there is a lurking bug/flaw somewhere. At worst,
the inconsistency could eventually be fatal to the host, e.g. if an ITS
command fails because KVM's view of things doesn't match reality/hardware.
Note, only the call from kvm_arch_irq_bypass_del_producer() by way of
kvm_vgic_v4_unset_forwarding() doesn't already WARN. Common KVM's
kvm_irq_routing_update() WARNs if kvm_arch_update_irqfd_routing() fails.
For that path, if its_unmap_vlpi() fails in kvm_vgic_v4_unset_forwarding(),
the only possible causes are that the GIC doesn't have a v4 ITS (from
its_irq_set_vcpu_affinity()):
/* Need a v4 ITS */
if (!is_v4(its_dev->its))
return -EINVAL;
guard(raw_spinlock)(&its_dev->event_map.vlpi_lock);
/* Unmap request? */
if (!info)
return its_vlpi_unmap(d);
or that KVM has gotten out of sync with the GIC/ITS (from its_vlpi_unmap()):
if (!its_dev->event_map.vm || !irqd_is_forwarded_to_vcpu(d))
return -EINVAL;
All of the above failure scenarios are warnable offences, as they should
never occur absent a kernel/KVM bug.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/all/aFWY2LTVIxz5rfhh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Wei-Lin reports that the tracking of shadow list registers is
majorly broken when resync'ing the L2 state after a run, as
we confuse the guest's LR index with the host's, potentially
losing the interrupt state.
While this could be fixed by adding yet another side index to
track it (Wei-Lin's fix), it may be better to refactor this
code to avoid having a side index altogether, limiting the
risk to introduce this class of bugs.
A key observation is that the shadow index is always the number
of bits in the lr_map bitmap. With that, the parallel indexing
scheme can be completely dropped.
While doing this, introduce a couple of helpers that abstract
the index conversion and some of the LR repainting, making the
whole exercise much simpler.
Reported-by: Wei-Lin Chang <r09922117@csie.ntu.edu.tw>
Reviewed-by: Wei-Lin Chang <r09922117@csie.ntu.edu.tw>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250614145721.2504524-1-r09922117@csie.ntu.edu.tw
Link: https://lore.kernel.org/r/86qzzkc5xa.wl-maz@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.16, take #2
- Rework of system register accessors for system registers that are
directly writen to memory, so that sanitisation of the in-memory
value happens at the correct time (after the read, or before the
write). For convenience, RMW-style accessors are also provided.
- Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
which was always broken.
|
|
Assigning a value to a system register doesn't do what it is
supposed to be doing if that register is one that has RESx bits.
The main problem is that we use __vcpu_sys_reg(), which can be used
both as a lvalue and rvalue. When used as a lvalue, the bit masking
occurs *before* the new value is assigned, meaning that we (1) do
pointless work on the old cvalue, and (2) potentially assign an
invalid value as we fail to apply the masks to it.
Fix this by providing a new __vcpu_assign_sys_reg() that does
what it says on the tin, and sanitises the *new* value instead of
the old one. This comes with a significant amount of churn.
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250603070824.1192795-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.16, take #1
- Make the irqbypass hooks resilient to changes in the GSI<->MSI
routing, avoiding behind stale vLPI mappings being left behind. The
fix is to resolve the VGIC IRQ using the host IRQ (which is stable)
and nuking the vLPI mapping upon a routing change.
- Close another VGIC race where vCPU creation races with VGIC
creation, leading to in-flight vCPUs entering the kernel w/o private
IRQs allocated.
- Fix a build issue triggered by the recently added workaround for
Ampere's AC04_CPU_23 erratum.
- Correctly sign-extend the VA when emulating a TLBI instruction
potentially targeting a VNCR mapping.
- Avoid dereferencing a NULL pointer in the VGIC debug code, which can
happen if the device doesn't have any mapping yet.
|
|
Dan reports that iterating over a device ITEs can legitimately lead
to a NULL pointer, and that the NULL check is placed *after* the
pointer has already been dereferenced.
Hoist the pointer check as early as possible and be done with it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 30deb51a677b ("KVM: arm64: vgic-its: Add debugfs interface to expose ITS tables")
Link: https://lore.kernel.org/r/aDBylI1YnjPatAbr@stanley.mountain
Cc: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20250530091647.1152489-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
syzkaller has found another ugly race in the VGIC, this time dealing
with VGIC creation. Since kvm_vgic_create() doesn't sufficiently protect
against in-flight vCPU creations, it is possible to get a vCPU into the
kernel w/ an in-kernel VGIC but no allocation of private IRQs:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000d20
Mem abort info:
ESR = 0x0000000096000046
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x06: level 2 translation fault
Data abort info:
ISV = 0, ISS = 0x00000046, ISS2 = 0x00000000
CM = 0, WnR = 1, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000103e4f000
[0000000000000d20] pgd=0800000102e1c403, p4d=0800000102e1c403, pud=0800000101146403, pmd=0000000000000000
Internal error: Oops: 0000000096000046 [#1] PREEMPT SMP
CPU: 9 UID: 0 PID: 246 Comm: test Not tainted 6.14.0-rc6-00097-g0c90821f5db8 #16
Hardware name: linux,dummy-virt (DT)
pstate: 814020c5 (Nzcv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : _raw_spin_lock_irqsave+0x34/0x8c
lr : kvm_vgic_set_owner+0x54/0xa4
sp : ffff80008086ba20
x29: ffff80008086ba20 x28: ffff0000c19b5640 x27: 0000000000000000
x26: 0000000000000000 x25: ffff0000c4879bd0 x24: 000000000000001e
x23: 0000000000000000 x22: 0000000000000000 x21: ffff0000c487af80
x20: ffff0000c487af18 x19: 0000000000000000 x18: 0000001afadd5a8b
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000001
x14: ffff0000c19b56c0 x13: 0030c9adf9d9889e x12: ffffc263710e1908
x11: 0000001afb0d74f2 x10: e0966b840b373664 x9 : ec806bf7d6a57cd5
x8 : ffff80008086b980 x7 : 0000000000000001 x6 : 0000000000000001
x5 : 0000000080800054 x4 : 4ec4ec4ec4ec4ec5 x3 : 0000000000000000
x2 : 0000000000000001 x1 : 0000000000000000 x0 : 0000000000000d20
Call trace:
_raw_spin_lock_irqsave+0x34/0x8c (P)
kvm_vgic_set_owner+0x54/0xa4
kvm_timer_enable+0xf4/0x274
kvm_arch_vcpu_run_pid_change+0xe0/0x380
kvm_vcpu_ioctl+0x93c/0x9e0
__arm64_sys_ioctl+0xb4/0xec
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x30/0xd0
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x198/0x19c
Code: b9000841 d503201f 52800001 52800022 (88e17c02)
---[ end trace 0000000000000000 ]---
Plug the race by explicitly checking for an in-progress vCPU creation
and failing kvm_vgic_create() when that's the case. Add some comments to
document all the things kvm_vgic_create() is trying to guard against
too.
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Tested-by: Alexander Potapenko <glider@google.com>
Link: https://lore.kernel.org/r/20250523194722.4066715-6-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The virtual mapping and "GSI" routing of a particular vLPI is subject to
change in response to the guest / userspace. This can be pretty annoying
to deal with when KVM needs to track the physical state that's managed
for vLPI direct injection.
Make vgic_v4_unset_forwarding() resilient by using the host IRQ to
resolve the vgic IRQ. Since this uses the LPI xarray directly, finding
the ITS by doorbell address + grabbing it's its_lock is no longer
necessary. Note that matching the right ITS / ITE is already handled in
vgic_v4_set_forwarding(), and unless there's a bug in KVM's VGIC ITS
emulation the virtual mapping that should remain stable for the lifetime
of the vLPI mapping.
Tested-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250523194722.4066715-4-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Though undocumented, KVM generally protects the translation of a vLPI
with the its_lock. While this makes perfectly good sense, as the ITS
itself contains the guest translation, an upcoming change will require
twiddling the vLPI mapping in an atomic context.
Switch to using the vIRQ's irq_lock to protect the translation. Use of
the its_lock in vgic_v4_unset_forwarding() is preserved for now as it
still needs to walk the ITS.
Tested-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250523194722.4066715-3-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The locking dance is about to get more interesting, switch the its_lock
over to a lock guard to make it a bit easier to handle.
Tested-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250523194722.4066715-2-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Use kvm_trylock_all_vcpus instead of a custom implementation when locking
all vCPUs of a VM, to avoid triggering a lockdep warning, in the case in
which the VM is configured to have more than MAX_LOCK_DEPTH vCPUs.
This fixes the following false lockdep warning:
[ 328.171264] BUG: MAX_LOCK_DEPTH too low!
[ 328.175227] turning off the locking correctness validator.
[ 328.180726] Please attach the output of /proc/lock_stat to the bug report
[ 328.187531] depth: 48 max: 48!
[ 328.190678] 48 locks held by qemu-kvm/11664:
[ 328.194957] #0: ffff800086de5ba0 (&kvm->lock){+.+.}-{3:3}, at: kvm_ioctl_create_device+0x174/0x5b0
[ 328.204048] #1: ffff0800e78800b8 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[ 328.212521] #2: ffff07ffeee51e98 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[ 328.220991] #3: ffff0800dc7d80b8 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[ 328.229463] #4: ffff07ffe0c980b8 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[ 328.237934] #5: ffff0800a3883c78 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[ 328.246405] #6: ffff07fffbe480b8 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-ID: <20250512180407.659015-6-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
As reported by the build robot, the documentation for vgic_its_iter_next()
contains a typo. Fix it.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505221421.KAuWlmSr-lkp@intel.com/
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
This commit introduces a debugfs interface to display the contents of the
VGIC Interrupt Translation Service (ITS) tables.
The ITS tables map Device/Event IDs to Interrupt IDs and target processors.
Exposing this information through debugfs allows for easier inspection and
debugging of the interrupt routing configuration.
The debugfs interface presents the ITS table data in a tabular format:
Device ID: 0x0, Event ID Range: [0 - 31]
EVENT_ID INTID HWINTID TARGET COL_ID HW
-----------------------------------------------
0 8192 0 0 0 0
1 8193 0 0 0 0
2 8194 0 2 2 0
Device ID: 0x18, Event ID Range: [0 - 3]
EVENT_ID INTID HWINTID TARGET COL_ID HW
-----------------------------------------------
0 8225 0 0 0 0
1 8226 0 1 1 0
2 8227 0 3 3 0
Device ID: 0x10, Event ID Range: [0 - 7]
EVENT_ID INTID HWINTID TARGET COL_ID HW
-----------------------------------------------
0 8229 0 3 3 1
1 8230 0 0 0 1
2 8231 0 1 1 1
3 8232 0 2 2 1
4 8233 0 3 3 1
The output is generated using the seq_file interface, allowing for efficient
handling of potentially large ITS tables.
This interface is read-only and does not allow modification of the ITS
tables. It is intended for debugging and informational purposes only.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20250220224247.2017205-1-jingzhangos@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In the case of ICH_LR<n>.HW == 1, bit 41 of LR is just a part of pINTID
without EOI meaning, and bit 41 will be zeroed by the subsequent clearing
of ICH_LR_PHYS_ID_MASK anyway.
No functional changes intended.
Signed-off-by: Wei-Lin Chang <r09922117@csie.ntu.edu.tw>
Link: https://lore.kernel.org/r/20250512133223.866999-1-r09922117@csie.ntu.edu.tw
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/pv-cpuid:
: Paravirtualized implementation ID, courtesy of Shameer Kolothum
:
: Big-little has historically been a pain in the ass to virtualize. The
: implementation ID (MIDR, REVIDR, AIDR) of a vCPU can change at the whim
: of vCPU scheduling. This can be particularly annoying when the guest
: needs to know the underlying implementation to mitigate errata.
:
: "Hyperscalers" face a similar scheduling problem, where VMs may freely
: migrate between hosts in a pool of heterogenous hardware. And yes, our
: server-class friends are equally riddled with errata too.
:
: In absence of an architected solution to this wart on the ecosystem,
: introduce support for paravirtualizing the implementation exposed
: to a VM, allowing the VMM to describe the pool of implementations that a
: VM may be exposed to due to scheduling/migration.
:
: Userspace is expected to intercept and handle these hypercalls using the
: SMCCC filter UAPI, should it choose to do so.
smccc: kvm_guest: Fix kernel builds for 32 bit arm
KVM: selftests: Add test for KVM_REG_ARM_VENDOR_HYP_BMAP_2
smccc/kvm_guest: Enable errata based on implementation CPUs
arm64: Make _midr_in_range_list() an exported function
KVM: arm64: Introduce KVM_REG_ARM_VENDOR_HYP_BMAP_2
KVM: arm64: Specify hypercall ABI for retrieving target implementations
arm64: Modify _midr_range() functions to read MIDR/REVIDR internally
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/nv-vgic:
: NV VGICv3 support, courtesy of Marc Zyngier
:
: Support for emulating the GIC hypervisor controls and managing shadow
: VGICv3 state for the L1 hypervisor. As part of it, bring in support for
: taking IRQs to the L1 and UAPI to manage the VGIC maintenance interrupt.
KVM: arm64: nv: Fail KVM init if asking for NV without GICv3
KVM: arm64: nv: Allow userland to set VGIC maintenance IRQ
KVM: arm64: nv: Fold GICv3 host trapping requirements into guest setup
KVM: arm64: nv: Propagate used_lrs between L1 and L0 contexts
KVM: arm64: nv: Request vPE doorbell upon nested ERET to L2
KVM: arm64: nv: Respect virtual HCR_EL2.TWx setting
KVM: arm64: nv: Add Maintenance Interrupt emulation
KVM: arm64: nv: Handle L2->L1 transition on interrupt injection
KVM: arm64: nv: Nested GICv3 emulation
KVM: arm64: nv: Sanitise ICH_HCR_EL2 accesses
KVM: arm64: nv: Plumb handling of GICv3 EL2 accesses
KVM: arm64: nv: Add ICH_*_EL2 registers to vpcu_sysreg
KVM: arm64: nv: Load timer before the GIC
arm64: sysreg: Add layout for ICH_MISR_EL2
arm64: sysreg: Add layout for ICH_VTR_EL2
arm64: sysreg: Add layout for ICH_HCR_EL2
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The VGIC maintenance IRQ signals various conditions about the LRs, when
the GIC's virtualization extension is used.
So far we didn't need it, but nested virtualization needs to know about
this interrupt, so add a userland interface to setup the IRQ number.
The architecture mandates that it must be a PPI, on top of that this code
only exports a per-device option, so the PPI is the same on all VCPUs.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[added some bits of documentation]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250225172930.1850838-16-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Popular HW that is able to use NV also has a broken vgic implementation
that requires trapping.
On such HW, propagate the host trap bits into the guest's shadow
ICH_HCR_EL2 register, making sure we don't allow an L2 guest to bring
the system down.
This involves a bit of tweaking so that the emulation code correctly
poicks up the shadow state as needed, and to only partially sync
ICH_HCR_EL2 back with the guest state to capture EOIcount.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250225172930.1850838-15-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
We have so far made sure that L1 and L0 vgic contexts were
totally independent. There is however one spot of bother with
this approach, and that's in the GICv3 emulation code required by
our fruity friends.
The issue is that the emulation code needs to know how many LRs
are in flight. And while it is easy to reach the L0 version through
the vcpu pointer, doing so for the L1 is much more complicated,
as these structures are private to the nested code.
We could simply expose that structure and pick one or the other
depending on the context, but this seems extra complexity for not
much benefit.
Instead, just propagate the number of used LRs from the nested code
into the L0 context, and be done with it. Should this become a burden,
it can be easily rectified.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250225172930.1850838-14-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Running an L2 guest with GICv4 enabled goes absolutely nowhere, and gets
into a vicious cycle of nested ERET followed by nested exception entry
into the L1.
When KVM does a put on a runnable vCPU, it marks the vPE as nonresident
but does not request a doorbell IRQ. Behind the scenes in the ITS
driver's view of the vCPU, its_vpe::pending_last gets set to true to
indicate that context is still runnable.
This comes to a head when doing the nested ERET into L2. The vPE doesn't
get scheduled on the redistributor as it is exclusively part of the L1's
VGIC context. kvm_vgic_vcpu_pending_irq() returns true because the vPE
appears runnable, and KVM does a nested exception entry into the L1
before L2 ever gets off the ground.
This issue can be papered over by requesting a doorbell IRQ when
descheduling a vPE as part of a nested ERET. KVM needs this anyway to
kick the vCPU out of the L2 when an IRQ becomes pending for the L1.
Link: https://lore.kernel.org/r/20240823212703.3576061-4-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250225172930.1850838-13-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Emulating the vGIC means emulating the dreaded Maintenance Interrupt.
This is a two-pronged problem:
- while running L2, getting an MI translates into an MI injected
in the L1 based on the state of the HW.
- while running L1, we must accurately reflect the state of the
MI line, based on the in-memory state.
The MI INTID is added to the distributor, as expected on any
virtualisation-capable implementation, and further patches
will allow its configuration.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250225172930.1850838-11-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
An interrupt being delivered to L1 while running L2 must result
in the correct exception being delivered to L1.
This means that if, on entry to L2, we found ourselves with pending
interrupts in the L1 distributor, we need to take immediate action.
This is done by posting a request which will prevent the entry in
L2, and deliver an IRQ exception to L1, forcing the switch.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250225172930.1850838-10-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When entering a nested VM, we set up the hypervisor control interface
based on what the guest hypervisor has set. Especially, we investigate
each list register written by the guest hypervisor whether HW bit is
set. If so, we translate hw irq number from the guest's point of view
to the real hardware irq number if there is a mapping.
Co-developed-by: Jintack Lim <jintack@cs.columbia.edu>
Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
[Christoffer: Redesigned execution flow around vcpu load/put]
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
[maz: Rewritten to support GICv3 instead of GICv2, NV2 support]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250225172930.1850838-9-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Wire the handling of all GICv3 EL2 registers, and provide emulation
for all the non memory-backed registers (ICC_SRE_EL2, ICH_VTR_EL2,
ICH_MISR_EL2, ICH_ELRSR_EL2, and ICH_EISR_EL2).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250225172930.1850838-7-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The ICH_VTR_EL2-related macros are missing a number of config
bits that we are about to handle. Take this opportunity to fully
describe the layout of that register as part of the automatic
generation infrastructure.
This results in a bit of churn to repaint constants that are now
generated with a different format.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250225172930.1850838-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The ICH_HCR_EL2-related macros are missing a number of control
bits that we are about to handle. Take this opportunity to fully
describe the layout of that register as part of the automatic
generation infrastructure.
This results in a bit of churn, unfortunately.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250225172930.1850838-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
These changes lay the groundwork for adding support for guest kernels,
allowing them to leverage target CPU implementations provided by the
VMM.
No functional changes intended.
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250221140229.12588-2-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Continuing with the theme of broken VMMs and guests, irqbypass
registration can fail if the virtual ITS lacks a translation for the
MSI. Either the guest hasn't mapped it or userspace may have forgotten
to restore the ITS.
Exit silently and allow irqbypass configuration to succeed. As a reward
for ingenuity, LPIs are demoted to software injection.
Tested-by: Sudheer Dantuluri <dantuluris@google.com>
Fixes: 196b136498b3 ("KVM: arm/arm64: GICv4: Wire mapping/unmapping of VLPIs in VFIO irq bypass")
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250226183124.82094-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The VMM or guest can easily screw up GICv4 vLPI injection by
misconfiguring the MSI or the virtual ITS. Don't fuss over it; limit the
WARN in vgic_v4_unset_forwarding() to fire in the worrying case where an
unrelated HW IRQ was mapped to a vLPI.
Reported-by: Sudheer Dantuluri <dantuluris@google.com>
Tested-by: Sudheer Dantuluri <dantuluris@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250226183124.82094-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
If userspace creates vcpus, then a vgic, we end-up in a situation
where irqchip_in_kernel() will return true, but no private interrupt
has been allocated for these vcpus. This situation will continue
until userspace initialises the vgic, at which point we fix the
early vcpus. Should a vcpu run or be initialised in the interval,
bad things may happen.
An obvious solution is to move this fix-up phase to the point where
the vgic is created. This ensures that from that point onwards,
all vcpus have their private interrupts, as new vcpus will directly
allocate them.
With that, we have the invariant that when irqchip_in_kernel() is
true, all vcpus have their private interrupts.
Reported-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250212182558.2865232-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/misc-6.14:
: .
: Misc KVM/arm64 changes for 6.14
:
: - Don't expose AArch32 EL0 capability when NV is enabled
:
: - Update documentation to reflect the full gamut of kvm-arm.mode
: behaviours
:
: - Use the hypervisor VA bit width when dumping stacktraces
:
: - Decouple the hypervisor stack size from PAGE_SIZE, at least
: on the surface...
:
: - Make use of str_enabled_disabled() when advertising GICv4.1 support
:
: - Explicitly handle BRBE traps as UNDEFINED
: .
KVM: arm64: Explicitly handle BRBE traps as UNDEFINED
KVM: arm64: vgic: Use str_enabled_disabled() in vgic_v3_probe()
arm64: kvm: Introduce nvhe stack size constants
KVM: arm64: Fix nVHE stacktrace VA bits mask
Documentation: Update the behaviour of "kvm-arm.mode"
KVM: arm64: nv: Advertise the lack of AArch32 EL0 support
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
