| Age | Commit message (Collapse) | Author |
|---|
|
In a number of cases, we perform a Read-Modify-Write operation on
a system register, meaning that we would apply the RESx masks twice.
Instead, provide a new accessor that performs this RMW operation,
allowing the masks to be applied exactly once per operation.
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250603070824.1192795-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Assigning a value to a system register doesn't do what it is
supposed to be doing if that register is one that has RESx bits.
The main problem is that we use __vcpu_sys_reg(), which can be used
both as a lvalue and rvalue. When used as a lvalue, the bit masking
occurs *before* the new value is assigned, meaning that we (1) do
pointless work on the old cvalue, and (2) potentially assign an
invalid value as we fail to apply the masks to it.
Fix this by providing a new __vcpu_assign_sys_reg() that does
what it says on the tin, and sanitises the *new* value instead of
the old one. This comes with a significant amount of churn.
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250603070824.1192795-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When EL2 is present, PMCR_EL0.N is the effective value of MDCR_EL2.HPMN
when accessed from EL1 or EL0.
Make sure we honor this requirement.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
As long as we had purely EL1 VMs, we could easily update the number
of guest-visible counters by letting userspace write to PMCR_EL0.N.
With VMs started at EL2, PMCR_EL1.N only reflects MDCR_EL2.HPMN,
and we don't have a good way to limit it.
For this purpose, introduce a new PMUv3 attribute that allows
limiting the maximum number of counters. This requires the explicit
selection of a PMU.
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Contrary to what the comment says in kvm_pmu_handle_pmcr(),
writing PMCR_EL0.P==1 has the following effects:
<quote>
The event counters affected by this field are:
* All event counters in the first range.
* If any of the following are true, all event counters in the second
range:
- EL2 is disabled or not implemented in the current Security state.
- The PE is executing at EL2 or EL3.
</quote>
where the "first range" represent the counters in the [0..HPMN-1]
range, and the "second range" the counters in the [HPMN..MAX] range.
It so appears that writing P from EL2 should nuke all counters,
and not just the "guest" view. Just do that, and nuke the misleading
comment.
Reported-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The MDCR_EL2 documentation indicates that the HPMN field has
the following behaviour:
"On a Warm reset, this field resets to the expression NUM_PMU_COUNTERS."
However, it appears we reset it to zero, which is not very useful.
Add a reset helper for MDCR_EL2, and handle the case where userspace
changes the target PMU, which may force us to change HPMN again.
Reported-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The pmcr_n field obviously refers to PMCR_EL0.N, but is generally used
as the number of counters seen by the guest. Rename it accordingly.
Suggested-by: Oliver upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/pmu-fixes:
: vPMU fixes for 6.15 courtesy of Akihiko Odaki
:
: Various fixes to KVM's vPMU implementation, notably ensuring
: userspace-directed changes to the PMCs are reflected in the backing perf
: events.
KVM: arm64: PMU: Reload when resetting
KVM: arm64: PMU: Reload when user modifies registers
KVM: arm64: PMU: Fix SET_ONE_REG for vPMC regs
KVM: arm64: PMU: Assume PMU presence in pmu-emul.c
KVM: arm64: PMU: Set raw values from user to PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Replace kvm_pmu_vcpu_reset() with the generic PMU reloading mechanism to
ensure the consistency with system registers and to reduce code size.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250315-pmc-v5-5-ecee87dab216@daynix.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Commit d0c94c49792c ("KVM: arm64: Restore PMU configuration on first
run") added the code to reload the PMU configuration on first run.
It is also important to keep the correct state even if system registers
are modified after first run, specifically when debugging Windows on
QEMU with GDB; QEMU tries to write back all visible registers when
resuming the VM execution with GDB, corrupting the PMU state. Windows
always uses the PMU so this can cause adverse effects on that particular
OS.
The usual register writes and reset are already handled independently,
but register writes from userspace are not covered.
Trigger the code to reload the PMU configuration for them instead so
that PMU configuration changes made by users will be applied also after
the first run.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250315-pmc-v5-4-ecee87dab216@daynix.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Reload the perf event when setting the vPMU counter (vPMC) registers
(PMCCNTR_EL0 and PMEVCNTR<n>_EL0). This is a change corresponding to
commit 9228b26194d1 ("KVM: arm64: PMU: Fix GET_ONE_REG
for vPMC regs to return the current value") but for SET_ONE_REG.
Values of vPMC registers are saved in sysreg files on certain occasions.
These saved values don't represent the current values of the vPMC
registers if the perf events for the vPMCs count events after the save.
The current values of those registers are the sum of the sysreg file
value and the current perf event counter value. But, when userspace
writes those registers (using KVM_SET_ONE_REG), KVM only updates the
sysreg file value and leaves the current perf event counter value as is.
It is also important to keep the correct state even if userspace writes
them after first run, specifically when debugging Windows on QEMU with
GDB; QEMU tries to write back all visible registers when resuming the VM
execution with GDB, corrupting the PMU state. Windows always uses the
PMU so this can cause adverse effects on that particular OS.
Fix this by releasing the current perf event and trigger recreating one
with KVM_REQ_RELOAD_PMU.
Fixes: 051ff581ce70 ("arm64: KVM: Add access handler for event counter register")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250315-pmc-v5-3-ecee87dab216@daynix.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Many functions in pmu-emul.c checks kvm_vcpu_has_pmu(vcpu). A favorable
interpretation is defensive programming, but it also has downsides:
- It is confusing as it implies these functions are called without PMU
although most of them are called only when a PMU is present.
- It makes semantics of functions fuzzy. For example, calling
kvm_pmu_disable_counter_mask() without PMU may result in no-op as
there are no enabled counters, but it's unclear what
kvm_pmu_get_counter_value() returns when there is no PMU.
- It allows callers without checking kvm_vcpu_has_pmu(vcpu), but it is
often wrong to call these functions without PMU.
- It is error-prone to duplicate kvm_vcpu_has_pmu(vcpu) checks into
multiple functions. Many functions are called for system registers,
and the system register infrastructure already employs less
error-prone, comprehensive checks.
Check kvm_vcpu_has_pmu(vcpu) in callers of these functions instead,
and remove the obsolete checks from pmu-emul.c. The only exceptions are
the functions that implement ioctls as they have definitive semantics
even when the PMU is not present.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250315-pmc-v5-2-ecee87dab216@daynix.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
PMUv3 requires that all programmable event counters are capable of
counting any event. The Apple M* PMU is quite a bit different, and
events have affinities for particular PMCs.
Expose 1 event counter on IMPDEF hardware, allowing the guest to do
something useful with its PMU while also upholding the requirements of
the architecture.
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250305203021.428366-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Map PMUv3 event IDs onto hardware, if the driver exposes such a helper.
This is expected to be quite rare, and only useful for non-PMUv3 hardware.
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250305202641.428114-12-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Advertise a baseline PMUv3 implementation when running on hardware with
IMPDEF traps of the PMUv3 sysregs.
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250305202641.428114-11-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The supported guest PMU version on a particular platform is ultimately a
KVM decision. Move PMUVer filtering into KVM code.
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250305202641.428114-9-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Get rid of some goto label patterns by using guard() to drop the
arm_pmus_lock when returning from a function.
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250305202641.428114-8-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
With the PMUv3 cpucap, kvm_arm_pmu_available is no longer used in the
hot path of guest entry/exit. On top of that, guest support for PMUv3
may not correlate with host support for the feature, e.g. on IMPDEF
hardware.
Throw out the static key and just inspect the list of PMUs to determine
if PMUv3 is supported for KVM guests.
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250305202641.428114-7-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Support for SW_INCR is unconditional, as KVM traps accesses to
PMSWINC_EL0 and emulates the intended event increment. While it is
expected that ~all PMUv3 implementations already advertise this event,
non-PMUv3 hardware may not.
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250305202641.428114-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The PMUv3 driver populates a couple of bitmaps with the values of
PMCEID{0,1}, from which the guest's PMCEID{0,1} can be derived. This
is particularly convenient when virtualizing PMUv3 on IMP DEF hardware,
as reading the nonexistent PMCEID registers leads to a rather unpleasant
UNDEF.
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250305202641.428114-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
An important distinction from other registers affected by HPMN is that
PMCR_EL0 only affects the guest range of counters, regardless of the EL
from which it is accessed. Ensure that PMCR_EL0.P is always applied to
'guest' counters by manually computing the mask rather than deriving it
from the current context.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241217175611.3658290-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Nested virt introduces yet another set of 'global' knobs for controlling
event counters that are reserved for EL2 (i.e. >= HPMN). Get ready to
share some plumbing with the NV controls by offloading counter
reprogramming to KVM_REQ_RELOAD_PMU.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241217175532.3658134-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Having separate helpers for enabling/disabling counters provides the
wrong abstraction, as the state of each counter needs to be evaluated
independently and, in some cases, use a different global enable bit.
Collapse the enable/disable accessors into a single, common helper that
reconfigures every counter set in @mask, leaving the complexity of
determining if an event is actually enabled in
kvm_pmu_counter_is_enabled().
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241217175513.3658056-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The 'global enable control' (as it is termed in the architecture) for
counters reserved by EL2 is MDCR_EL2.HPME. Use that instead of
PMCR_EL0.E when evaluating the overflow state for hyp counters.
Change the return value to a bool while at it, which better reflects the
fact that the overflow state is a shared signal and not a per-counter
property.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241120005230.2335682-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
DDI0487K.a D13.3.1 describes the PMU overflow condition, which evaluates
to true if any counter's global enable (PMCR_EL0.E), overflow flag
(PMOVSSET_EL0[n]), and interrupt enable (PMINTENSET_EL1[n]) are all 1.
Of note, this does not require a counter to be enabled
(i.e. PMCNTENSET_EL0[n] = 1) to generate an overflow.
Align kvm_pmu_overflow_status() with the reality of the architecture
and stop using PMCNTENSET_EL0 as part of the overflow condition. The
bug was discovered while running an SBSA PMU test [*], which only sets
PMCR.E, PMOVSSET<0>, PMINTENSET<0>, and expects an overflow interrupt.
Cc: stable@vger.kernel.org
Fixes: 76d883c4e640 ("arm64: KVM: Add access handler for PMOVSSET and PMOVSCLR register")
Link: https://github.com/ARM-software/sbsa-acs/blob/master/test_pool/pmu/operating_system/test_pmu001.c
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
[ oliver: massaged changelog ]
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241120005230.2335682-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Start reprogramming PMU events at nested boundaries now that everything
is in place to handle the EL2 event filter. Only repaint events where
the filter differs between EL1 and EL2 as a slight optimization.
PMU now 'works' for nested VMs, albeit slow.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182559.3364829-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
It hopefully comes as no surprise when I say that vEL2 actually runs at
EL1. So, the guest hypervisor's EL2 event filter (NSH) needs to actually
be applied to EL1 in the perf event. In addition to this, the disable
bit for the guest counter range (HPMD) needs to have the effect of
stopping the affected counters.
Do exactly that by stuffing ::exclude_kernel with the combined effect of
these controls. This isn't quite enough yet, as the backing perf events
need to be reprogrammed upon nested ERET/exception entry to remap the
effective filter onto ::exclude_kernel.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-18-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Counters that fall in the hypervisor range (i.e. N >= HPMN) have a
separate control for enabling 64 bit overflow. Take it into account.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-17-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When the PMU is configured with split counter ranges, HPME becomes the
enable bit for the counters reserved for EL2.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-16-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Checking the exception level filters for a PMC is a minor annoyance to
open code. Add helpers to check if an event counts at EL0 and EL1, which
will prove useful in a subsequent change.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-15-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The value of MDCR_EL2.HPMN controls the number of event counters made
visible to EL0 and EL1. This means it is possible for the guest
hypervisor to allow direct access to event counters to the L2.
Rework KVM's PMU register emulation to take the effects of HPMN into
account when handling a trap. For bitmask-style registers, writes only
affect accessible registers.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-14-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Nested PMU support requires dynamically changing the visible range of
PMU counters based on the exception level and value of MDCR_EL2.HPMN. At
the same time, the PMU emulation code needs to know the absolute number
of implemented counters, regardless of context.
Rename the existing helper to make it obvious that it returns the number
of implemented counters and not anything else.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-13-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
MDCR_EL2.HPMN splits the PMU event counters into two ranges: the first
range is accessible from all ELs, and the second range is accessible
only to EL2/3. Supposing the guest hypervisor allows direct access to
the PMU counters from the L2, KVM needs to locally handle those
accesses.
Add a new complex trap configuration for HPMN that checks if the counter
index is accessible to the current context. As written, the architecture
suggests HPMN only causes PMEVCNTR<n>_EL0 to trap, though intuition (and
the pseudocode) suggest that the trap applies to PMEVTYPER<n>_EL0 as
well.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-11-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
There are 2 defines for the number of PMU counters:
ARMV8_PMU_MAX_COUNTERS and ARMPMU_MAX_HWEVENTS. Both are the same
currently, but Armv9.4/8.9 increases the number of possible counters
from 32 to 33. With this change, the maximum number of counters will
differ for KVM's PMU emulation which is PMUv3.4. Give KVM PMU emulation
its own define to decouple it from the rest of the kernel's number PMU
counters.
The VHE PMU code needs to match the PMU driver, so switch it to use
ARMPMU_MAX_HWEVENTS instead.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-6-280a8d7ff465@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Xscale and Armv6 PMUs defined the cycle counter at 0 and event counters
starting at 1 and had 1:1 event index to counter numbering. On Armv7 and
later, this changed the cycle counter to 31 and event counters start at
0. The drivers for Armv7 and PMUv3 kept the old event index numbering
and introduced an event index to counter conversion. The conversion uses
masking to convert from event index to a counter number. This operation
relies on having at most 32 counters so that the cycle counter index 0
can be transformed to counter number 31.
Armv9.4 adds support for an additional fixed function counter
(instructions) which increases possible counters to more than 32, and
the conversion won't work anymore as a simple subtract and mask. The
primary reason for the translation (other than history) seems to be to
have a contiguous mask of counters 0-N. Keeping that would result in
more complicated index to counter conversions. Instead, store a mask of
available counters rather than just number of events. That provides more
information in addition to the number of events.
No (intended) functional changes.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-1-280a8d7ff465@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1
of the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under
KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
LoongArch:
- Add paravirt steal time support
- Add support for KVM_DIRTY_LOG_INITIALLY_SET
- Add perf kvm-stat support for loongarch
RISC-V:
- Redirect AMO load/store access fault traps to guest
- perf kvm stat support
- Use guest files for IMSIC virtualization, when available
s390:
- Assortment of tiny fixes which are not time critical
x86:
- Fixes for Xen emulation
- Add a global struct to consolidate tracking of host values, e.g.
EFER
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the
effective APIC bus frequency, because TDX
- Print the name of the APICv/AVIC inhibits in the relevant
tracepoint
- Clean up KVM's handling of vendor specific emulation to
consistently act on "compatible with Intel/AMD", versus checking
for a specific vendor
- Drop MTRR virtualization, and instead always honor guest PAT on
CPUs that support self-snoop
- Update to the newfangled Intel CPU FMS infrastructure
- Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as
it reads '0' and writes from userspace are ignored
- Misc cleanups
x86 - MMU:
- Small cleanups, renames and refactoring extracted from the upcoming
Intel TDX support
- Don't allocate kvm_mmu_page.shadowed_translation for shadow pages
that can't hold leafs SPTEs
- Unconditionally drop mmu_lock when allocating TDP MMU page tables
for eager page splitting, to avoid stalling vCPUs when splitting
huge pages
- Bug the VM instead of simply warning if KVM tries to split a SPTE
that is non-present or not-huge. KVM is guaranteed to end up in a
broken state because the callers fully expect a valid SPTE, it's
all but dangerous to let more MMU changes happen afterwards
x86 - AMD:
- Make per-CPU save_area allocations NUMA-aware
- Force sev_es_host_save_area() to be inlined to avoid calling into
an instrumentable function from noinstr code
- Base support for running SEV-SNP guests. API-wise, this includes a
new KVM_X86_SNP_VM type, encrypting/measure the initial image into
guest memory, and finalizing it before launching it. Internally,
there are some gmem/mmu hooks needed to prepare gmem-allocated
pages before mapping them into guest private memory ranges
This includes basic support for attestation guest requests, enough
to say that KVM supports the GHCB 2.0 specification
There is no support yet for loading into the firmware those signing
keys to be used for attestation requests, and therefore no need yet
for the host to provide certificate data for those keys.
To support fetching certificate data from userspace, a new KVM exit
type will be needed to handle fetching the certificate from
userspace.
An attempt to define a new KVM_EXIT_COCO / KVM_EXIT_COCO_REQ_CERTS
exit type to handle this was introduced in v1 of this patchset, but
is still being discussed by community, so for now this patchset
only implements a stub version of SNP Extended Guest Requests that
does not provide certificate data
x86 - Intel:
- Remove an unnecessary EPT TLB flush when enabling hardware
- Fix a series of bugs that cause KVM to fail to detect nested
pending posted interrupts as valid wake eents for a vCPU executing
HLT in L2 (with HLT-exiting disable by L1)
- KVM: x86: Suppress MMIO that is triggered during task switch
emulation
Explicitly suppress userspace emulated MMIO exits that are
triggered when emulating a task switch as KVM doesn't support
userspace MMIO during complex (multi-step) emulation
Silently ignoring the exit request can result in the
WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to userspace
for some other reason prior to purging mmio_needed
See commit 0dc902267cb3 ("KVM: x86: Suppress pending MMIO write
exits if emulator detects exception") for more details on KVM's
limitations with respect to emulated MMIO during complex emulator
flows
Generic:
- Rename the AS_UNMOVABLE flag that was introduced for KVM to
AS_INACCESSIBLE, because the special casing needed by these pages
is not due to just unmovability (and in fact they are only
unmovable because the CPU cannot access them)
- New ioctl to populate the KVM page tables in advance, which is
useful to mitigate KVM page faults during guest boot or after live
migration. The code will also be used by TDX, but (probably) not
through the ioctl
- Enable halt poll shrinking by default, as Intel found it to be a
clear win
- Setup empty IRQ routing when creating a VM to avoid having to
synchronize SRCU when creating a split IRQCHIP on x86
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with
a flag that arch code can use for hooking both sched_in() and
sched_out()
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace
detect bugs
- Mark a vCPU as preempted if and only if it's scheduled out while in
the KVM_RUN loop, e.g. to avoid marking it preempted and thus
writing guest memory when retrieving guest state during live
migration blackout
Selftests:
- Remove dead code in the memslot modification stress test
- Treat "branch instructions retired" as supported on all AMD Family
17h+ CPUs
- Print the guest pseudo-RNG seed only when it changes, to avoid
spamming the log for tests that create lots of VMs
- Make the PMU counters test less flaky when counting LLC cache
misses by doing CLFLUSH{OPT} in every loop iteration"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
crypto: ccp: Add the SNP_VLEK_LOAD command
KVM: x86/pmu: Add kvm_pmu_call() to simplify static calls of kvm_pmu_ops
KVM: x86: Introduce kvm_x86_call() to simplify static calls of kvm_x86_ops
KVM: x86: Replace static_call_cond() with static_call()
KVM: SEV: Provide support for SNP_EXTENDED_GUEST_REQUEST NAE event
x86/sev: Move sev_guest.h into common SEV header
KVM: SEV: Provide support for SNP_GUEST_REQUEST NAE event
KVM: x86: Suppress MMIO that is triggered during task switch emulation
KVM: x86/mmu: Clean up make_huge_page_split_spte() definition and intro
KVM: x86/mmu: Bug the VM if KVM tries to split a !hugepage SPTE
KVM: selftests: x86: Add test for KVM_PRE_FAULT_MEMORY
KVM: x86: Implement kvm_arch_vcpu_pre_fault_memory()
KVM: x86/mmu: Make kvm_mmu_do_page_fault() return mapped level
KVM: x86/mmu: Account pf_{fixed,emulate,spurious} in callers of "do page fault"
KVM: x86/mmu: Bump pf_taken stat only in the "real" page fault handler
KVM: Add KVM_PRE_FAULT_MEMORY vcpu ioctl to pre-populate guest memory
KVM: Document KVM_PRE_FAULT_MEMORY ioctl
mm, virt: merge AS_UNMOVABLE and AS_INACCESSIBLE
perf kvm: Add kvm-stat for loongarch64
LoongArch: KVM: Add PV steal time support in guest side
...
|
|
The arm64 asm/arm_pmuv3.h depends on defines from
linux/perf/arm_pmuv3.h. Rather than depend on include order, follow the
usual pattern of "linux" headers including "asm" headers of the same
name.
With this change, the include of linux/kvm_host.h is problematic due to
circular includes:
In file included from ../arch/arm64/include/asm/arm_pmuv3.h:9,
from ../include/linux/perf/arm_pmuv3.h:312,
from ../include/kvm/arm_pmu.h:11,
from ../arch/arm64/include/asm/kvm_host.h:38,
from ../arch/arm64/mm/init.c:41:
../include/linux/kvm_host.h:383:30: error: field 'arch' has incomplete type
Switching to asm/kvm_host.h solves the issue.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240626-arm-pmu-3-9-icntr-v2-5-c9784b4f4065@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
IDREG() expands to the storage of a particular ID reg, which can be
useful for handling both reads and writes. However, outside of a select
few situations, the ID registers should be considered read only.
Replace current readers with a new macro that expands to the value of
the field rather than the field itself.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20240619174036.483943-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/kerneldoc:
: kerneldoc warning fixes, courtesy of Randy Dunlap
:
: Fixes addressing the widespread misuse of kerneldoc-style comments
: throughout KVM/arm64.
KVM: arm64: vgic: fix a kernel-doc warning
KVM: arm64: vgic-its: fix kernel-doc warnings
KVM: arm64: vgic-init: fix a kernel-doc warning
KVM: arm64: sys_regs: fix kernel-doc warnings
KVM: arm64: PMU: fix kernel-doc warnings
KVM: arm64: mmu: fix a kernel-doc warning
KVM: arm64: vhe: fix a kernel-doc warning
KVM: arm64: hyp/aarch32: fix kernel-doc warnings
KVM: arm64: guest: fix kernel-doc warnings
KVM: arm64: debug: fix kernel-doc warnings
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
In order to make it easier to check whether a particular feature
is exposed to a guest, add a new set of helpers, with kvm_has_feat()
being the most useful.
Let's start making use of them in the PMU code (courtesy of Oliver).
Follow-up changes will introduce additional use patterns.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Co-developed--by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Change 2 uses of "/**" on non-kernel-doc comments to common "/*"
comments to prevent kernel-doc warnings:
arch/arm64/kvm/pmu-emul.c:423: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* When perf interrupt is an NMI, we cannot safely notify the vcpu corresponding
arch/arm64/kvm/pmu-emul.c:494: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* When the perf event overflows, set the overflow status and inform the vcpu.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: kvmarm@lists.linux.dev
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20240117230714.31025-7-rdunlap@infradead.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
This is so that FIELD_GET and FIELD_PREP can be used and that the fields
are in a consistent format to arm64/tools/sysreg
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20231211161331.1277825-3-james.clark@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
* kvm-arm64/pmu_pmcr_n:
: User-defined PMC limit, courtesy Raghavendra Rao Ananta
:
: Certain VMMs may want to reserve some PMCs for host use while running a
: KVM guest. This was a bit difficult before, as KVM advertised all
: supported counters to the guest. Userspace can now limit the number of
: advertised PMCs by writing to PMCR_EL0.N, as KVM's sysreg and PMU
: emulation enforce the specified limit for handling guest accesses.
KVM: selftests: aarch64: vPMU test for validating user accesses
KVM: selftests: aarch64: vPMU register test for unimplemented counters
KVM: selftests: aarch64: vPMU register test for implemented counters
KVM: selftests: aarch64: Introduce vpmu_counter_access test
tools: Import arm_pmuv3.h
KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest
KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run
KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
KVM: arm64: PMU: Set PMCR_EL0.N for vCPU based on the associated PMU
KVM: arm64: PMU: Add a helper to read a vCPU's PMCR_EL0
KVM: arm64: Select default PMU in KVM_ARM_VCPU_INIT handler
KVM: arm64: PMU: Introduce helpers to set the guest's PMU
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/sgi-injection:
: vSGI injection improvements + fixes, courtesy Marc Zyngier
:
: Avoid linearly searching for vSGI targets using a compressed MPIDR to
: index a cache. While at it, fix some egregious bugs in KVM's mishandling
: of vcpuid (user-controlled value) and vcpu_idx.
KVM: arm64: Clarify the ordering requirements for vcpu/RD creation
KVM: arm64: vgic-v3: Optimize affinity-based SGI injection
KVM: arm64: Fast-track kvm_mpidr_to_vcpu() when mpidr_data is available
KVM: arm64: Build MPIDR to vcpu index cache at runtime
KVM: arm64: Simplify kvm_vcpu_get_mpidr_aff()
KVM: arm64: Use vcpu_idx for invalidation tracking
KVM: arm64: vgic: Use vcpu_idx for the debug information
KVM: arm64: vgic-v2: Use cpuid from userspace as vcpu_id
KVM: arm64: vgic-v3: Refactor GICv3 SGI generation
KVM: arm64: vgic-its: Treat the collection target address as a vcpu_id
KVM: arm64: vgic: Make kvm_vgic_inject_irq() take a vcpu pointer
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
For unimplemented counters, the registers PM{C,I}NTEN{SET,CLR}
and PMOVS{SET,CLR} are expected to have the corresponding bits RAZ.
Hence to ensure correct KVM's PMU emulation, mask out the RES0 bits.
Defer this work to the point that userspace can no longer change the
number of advertised PMCs.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-7-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The number of PMU event counters is indicated in PMCR_EL0.N.
For a vCPU with PMUv3 configured, the value is set to the same
value as the current PE on every vCPU reset. Unless the vCPU is
pinned to PEs that has the PMU associated to the guest from the
initial vCPU reset, the value might be different from the PMU's
PMCR_EL0.N on heterogeneous PMU systems.
Fix this by setting the vCPU's PMCR_EL0.N to the PMU's PMCR_EL0.N
value. Track the PMCR_EL0.N per guest, as only one PMU can be set
for the guest (PMCR_EL0.N must be the same for all vCPUs of the
guest), and it is convenient for updating the value.
To achieve this, the patch introduces a helper,
kvm_arm_pmu_get_max_counters(), that reads the maximum number of
counters from the arm_pmu associated to the VM. Make the function
global as upcoming patches will be interested to know the value
while setting the PMCR.N of the guest from userspace.
KVM does not yet support userspace modifying PMCR_EL0.N.
The following patch will add support for that.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Co-developed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20231020214053.2144305-5-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add a helper to read a vCPU's PMCR_EL0, and use it whenever KVM
reads a vCPU's PMCR_EL0.
Currently, the PMCR_EL0 value is tracked per vCPU. The following
patches will make (only) PMCR_EL0.N track per guest. Having the
new helper will be useful to combine the PMCR_EL0.N field
(tracked per guest) and the other fields (tracked per vCPU)
to provide the value of PMCR_EL0.
No functional change intended.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-4-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Future changes to KVM's sysreg emulation will rely on having a valid PMU
instance to determine the number of implemented counters (PMCR_EL0.N).
This is earlier than when userspace is expected to modify the vPMU
device attributes, where the default is selected today.
Select the default PMU when handling KVM_ARM_VCPU_INIT such that it is
available in time for sysreg emulation.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Co-developed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20231020214053.2144305-3-rananta@google.com
[Oliver: rewrite changelog]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Suzuki noticed that KVM's PMU emulation is oblivious to the NSU and NSK
event filter bits. On systems that have EL3 these bits modify the
filter behavior in non-secure EL0 and EL1, respectively. Even though the
kernel doesn't use these bits, it is entirely possible some other guest
OS does. Additionally, it would appear that these and the M bit are
required by the architecture if EL3 is implemented.
Allow the EL3 event filter bits to be set if EL3 is advertised in the
guest's ID register. Implement the behavior of NSU and NSK according to
the pseudocode, and entirely ignore the M bit for perf event creation.
Reported-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231019185618.3442949-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The NSH bit, which filters event counting at EL2, is required by the
architecture if an implementation has EL2. Even though KVM doesn't
support nested virt yet, it makes no effort to hide the existence of EL2
from the ID registers. Userspace can, however, change the value of PFR0
to hide EL2. Align KVM's sysreg emulation with the architecture and make
NSH RES0 if EL2 isn't advertised. Keep in mind the bit is ignored when
constructing the backing perf event.
While at it, build the event type mask using explicit field definitions
instead of relying on ARMV8_PMU_EVTYPE_MASK. KVM probably should've been
doing this in the first place, as it avoids changes to the
aforementioned mask affecting sysreg emulation.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231019185618.3442949-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
