| Age | Commit message (Collapse) | Author |
|---|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are 11 newly supported SoCs, but these are all either new
variants of existing designs, or straight reuses of the existing chip
in a new package:
- RK3562 is a new chip based on the old Cortex-A53 core, apparently a
low-cost version of the Cortex-A55 based RK3568/RK3566.
- NXP i.MX94 is a minor variation of i.MX93/i.MX95 with a different
set of on-chip peripherals.
- Renesas RZ/V2N (R9A09G056) is a new member of the larger RZ/V2
family
- Amlogic S6/S7/S7D
- Samsung Exynos7870 is an older chip similar to Exynos7885
- WonderMedia wm8950 is a minor variation on the wm8850 chip
- Amlogic s805y is almost idential to s805x
- Allwinner A523 is similar to A527 and T527
- Qualcomm MSM8926 is a variant of MSM8226
- Qualcomm Snapdragon X1P42100 is related to R1E80100
There are also 65 boards, including reference designs for the chips
above, this includes
- 12 new boards based on TI K3 series chips, most of them from
Toradex
- 10 devices using Rockchips RK35xx and PX30 chips
- 2 phones and 2 laptops based on Qualcomm Snapdragon designs
- 10 NXP i.MX8/i.MX9 boards, mostly for embedded/industrial uses
- 3 Samsung Galaxy phones based on Exynos7870
- 5 Allwinner based boards using a variety of ARMv8 chips
- 9 32-bit machines, each based on a different SoC family
Aside from the new hardware, there is the usual set of cleanups and
newly added hardware support on existing machines, for a total of 965
devicetree changesets"
* tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (956 commits)
MAINTAINERS, mailmap: update Sven Peter's email address
arm64: dts: renesas: rzg3e-smarc-som: Reduce I2C2 clock frequency
arm64: dts: nuvoton: Add pinctrl
ARM: dts: samsung: sp5v210-aries: Align wifi node name with bindings
arm64: dts: blaize-blzp1600: Enable GPIO support
dt-bindings: clock: socfpga: convert to yaml
arm64: dts: rockchip: move rk3562 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3562 pcie unit addresses
arm64: dts: rockchip: move rk3528 pinctrl node outside the soc node
arm64: dts: rockchip: remove a double-empty line from rk3576 core dtsi
arm64: dts: rockchip: move rk3576 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3576 pcie unit addresses
arm64: dts: rockchip: Drop assigned-clock* from cpu nodes on rk3588
arm64: dts: rockchip: Add missing SFC power-domains to rk3576
Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0"
arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes
arm64: dts: mt6359: Rename RTC node to match binding expectations
arm64: dts: mt8365-evk: Add goodix touchscreen support
arm64: dts: mediatek: mt8188: Add missing #reset-cells property
arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board
...
|
|
Update accepted voltage levels according to IMX7DCEC Table 9 Operating ranges
Signed-off-by: Efe Can İçöz <efecanicoz@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Since commit 3c3606793f7e ("dt-bindings: wireless: bcm4329-fmac: Use
wireless-controller.yaml schema"), bindings expect 'wifi' as node name:
imx7d-remarkable2.dtb: bcrmf@1: $nodename:0: 'bcrmf@1' does not match '^wifi(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The compatible "plx,pex8605" does not exist, there is no DT binding for
it and there was never a driver matching this compatible, remove it.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The "clock-latency" property is part of the deprecated opp-v1 binding
and is redundant if the opp-v2 table has equal or larger values in any
"clock-latency-ns". The OPP tables have values of 150000, so it can be
removed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The "fsl,mma7455l" compatible string is not documented anywhere.
MMA7455L is the exact same device as the MMA7455, with the exception that
it is lead-free. Use the documented compatible string.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect NAND controller device nodes to be named
"nand-controller".
Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Commit c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK specific
PHY fixup") removed a PHY fixup that setted the clock mode and the LED
mode.
Make the Ethernet interface work again by doing as advised in the
commit's log, set clock mode and the LED mode in the device tree.
Fixes: c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Per imx-iim.yaml, the compatible string should only contain a single
entry.
Change it accordingly to fix the following dt-schema warnings:
efuse@83f98000: compatible: ['fsl,imx51-iim', 'fsl,imx27-iim', 'syscon'] is too long
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to mtd-physmap.yaml, 'nor' is not a valid node name.
Change it to 'flash' to fix the following dt-schema warning:
nor@0,0: $nodename:0: 'nor@0,0' does not match '^(flash|.*sram|nand)(@.*)?$'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There is new support for additional on-chip devices on Apple,
Mediatek, Renesas, Rockchip, Samsung, Google, TI, ST, Nvidia and
Amlogic devices.
The Arm Morello reference platform gets a devicetree for booting in
normal aarch64 mode. The hardware supports experimental CHERI support,
which requires a modified kernel.
The AMD (formerly Xilinx) Versal NET SoC gets added, this is a
combined FPGA with Cortex-A78 CPUs in a SoC.
Six new ST STM32MP2 SoC variants are added. Like the earlier
STM32MP25, the MP211, MP213, MP215, MP231, MP233 and MP235 models are
based on one or two Cortex-A35 cores but each feature a different set
of I/O devices.
Mediatek MT8370 is a minor variation of MT8390 with fewer CPU and GPU
cores
Apple T2 is the baseboard management controller on earlier Intel CPU
based Macs, with 16 models now gaining initial support.
All the above come with dts files for the reference boards. In
addition, these boards are added for the SoCs that are already
supported:
- The Milk-V Jupiter board based on SpacemiT K1/M1
- NetCube Systems Kumquat board based on the 32-bit Allwinner V3s SoC
- Three boards based on 32-bit stm32mp1
- 11 distinct board variants from Toradex and one from Variscite, all
based on i.MX6
- Google Pixel Pro 6 phone based on gs101 (Tensor)
- Three additional variants of the i.MX8MP based "Skov" board
- A second variant of the i.MX95 EVK board
- Two boards based on Renesas SoCs
- Four boards based the Rockchip RK35xx series, plus the RK3588 'MNT
Reform 2' laptop"
* tag 'soc-dt-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (538 commits)
arm64: dts: Add gpio_intc node for Amlogic A5 SoCs
arm64: dts: Add gpio_intc node for Amlogic A4 SoCs
arm64: dts: hi3660: Add property for fixing CPUIdle
arm64: dts: rockchip: remove ethm0_clk0_25m_out from Sige5 gmac0
arm64: dts: marvell: Use preferred node names for "simple-bus"
arm64: dts: marvell: Drop unused CP11X_TYPE define
arm64: dts: marvell: Move arch timer and pmu nodes to top-level
arm64: dts: rockchip: Fix PWM pinctrl names
arm64: dts: rockchip: fix RK3576 SCMI clock IDs
dt-bindings: clock: rk3576: add SCMI clocks
arm64: dts: rockchip: Fix pcie reset gpio on Orange Pi 5 Max
arm64: dts: amd/seattle: Drop undocumented "spi-controller" properties
arm64: dts: amd/seattle: Fix bus, mmc, and ethernet node names
arm64: dts: amd/seattle: Move and simplify fixed clocks
arm64: dts: amd/seattle: Base Overdrive B1 on top of B0 version
arm64: dts: rockchip: Enable HDMI audio output for ArmSoM Sige7
arm64: dts: rockchip: Enable onboard eMMC on Radxa E20C
arm64: dts: rockchip: Add SDHCI controller for RK3528
arm64: dts: rockchip: Remove bluetooth node from rock-3a
arm64: dts: rockchip: Move rk356x scmi SHMEM to reserved memory
...
|
|
Apalis/Colibri iMX6 V1.2 replaced the STMPE811 ADC/touch controller,
which is EOL, with the TLA2024 ADC and AD7879 touch controller.
Accurately describe the new hardware.
v1.1 of these SoMs is still described by the following DTSI files:
imx6qdl-apalis.dtsi
imx6qdl-colibri.dtsi
v1.2 is now supported by a DTSI that modifies v1.1:
imx6qdl-apalis-v1.2.dtsi
imx6qdl-colibri-v1.2.dtsi
For each carrier board using these modules, a new DTS file was added
that includes the v1.1 DTS and modifies it with this v1.2 DTSI.
The original DTS can be used for modules up to and including v1.1.
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable the STMPE811 touchscreen in the SOM dtsi files. The STMPE811 is
part of the SOM. It's self contained within it, therefore, disabling it
is not the correct default behavior.
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the Variscite Concerto Carrier Board with:
- LVDS interface for the VLCD-CAP-GLD-LVDS 7" LCD 800 x 480 touch
display (not configured)
- USB Host + USB OTG Connector
- 10/100 Mbps Ethernet
- miniPCI-Express slot
- SD Card connector
- Audio Headphone/Line In jack connectors
- S-ATA
- On-board DMIC
Product Page: https://www.variscite.com/product/single-board-computers/concerto-board
This file is based on the one provided by Variscite on their own kernel,
but adapted for mainline.
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the Variscite VAR_SOM-MX6UL SoM with:
- NXP i.MX6 UltraLite SoC
- 128–1024 MB DDR3L
- 8–128 GB eMMC
- 128–512 MB SLC NAND
- Camera Interface
- LVDS / Parallel RGB interfaces (not configured)
- Touch controller (not configured)
- Ethernet RMII interface (not configured)
- On-SoM Wi-Fi/Bluetooth with CYW43353 on SDIO Module (not configured)
- SD/MMC/SDIO interface
- USB Host + USB OTG interface
- I2C interfaces
- SPI interfaces
- PCI-Express 2.0 interface
- on-SoM Audio Codec (not configured)
- S/PDIF interface (not configured)
Product website: https://www.variscite.com/product/system-on-module-som/cortex-a7/var-som-6ul-nxp-imx6ul-6ull-6ulz
Support is handled with a SoM-centric dtsi exporting the default
interfaces along the default pinmuxing to be enabled by the board dts
file.
I tested this on a VAR-SOM-6UL_G2_700C_512R_8N_IT_REV1.3A, which is why
some of the features above are mentioned as "not configured" (I couldn't
test them).
This file is based on the one provided by Variscite on their own kernel,
but adapted for mainline.
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The SoM cannot be used standalone, this compatible is invalid and it is
always overwritten when this .dtsi file is included, remove it
therefore.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
TQMa6UL1 has only one FEC which needs to be disabled as one of the last
steps.
imx6ul-tqma6ul2.dtsi can't be included in imx6ul-tqma6ul1.dtsi as the
defaults from imx6ul.dtsi will be applied again.
Fixes: 7b8861d8e627 ("ARM: dts: imx6ul: add TQ-Systems MBa6ULx device trees")
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
gpio-pca95xx.yaml documents 'nxp,pca9554', so use this compatible
to fix the following dt-schema warning:
failed to match any schema with compatible: ['pca9554']
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to mxc-nand.yaml, the correct node name must be
'nand-controller'.
Change it accordingly to fix the following dt-schema warning:
$nodename:0: 'nand@b8000000' does not match '^nand-controller(@.*)?'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The bootloader adds MTD partitions in this subnode if present.
Add an empty partitions node which the bootloader will fill with
configured MTD partitions.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
(Q)SPI NOR flash is supplied by 3.3V. Add the corresponding supply.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The bootloader adds MTD partitions in this subnode if present, or in the
spi-nor node itself otherwise.
Setting #size-cells in MTD nodes itself is deprecated by mtd.yaml.
Fix all this by adding an empty partitions node which the bootloader will
fill with configured MTD partitions. Remove the deprecated properties
as well.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
(Q)SPI NOR flash is supplied by 1.8V. Add the corresponding supply.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
'compatible' and 'reg' are put first.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The bootloader may add MTD partitions in this subnode if present.
Add an empty partitions node which the bootloader will fill with
configured MTD partitions. Remove #size-cells from MTD node
because this is deprecated.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This matches the real hardware and allows to remove
the virtual 3.3V regulator.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This is a fixed 3.3V rail supplying several hardware on SOM.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
'compatible' and 'reg' are put first.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
WM8960 has the following power supplies:
- AVDD
- DBVDD
- DCVDD
- SPKVDD1
- SPKVDD2
Add new audio regulators to reflect the schematic and complete missed
power supplies.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
WM8960 has the following power supplies:
- AVDD
- DBVDD
- DCVDD
- SPKVDD1
- SPKVDD2
Add new audio regulators to reflect the schematic and complete missed
power supplies.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The card name for ALSA is generated from the model name string and
is limited to 16 characters. Use a shorter name to prevent cutting the
name.
Since nearly all starter kit mainboards for i.MX based SoM by TQ-Systems
use the same codec with the same routing on board it is a good idea to
use the same mode name for the sound card. This allows sharing a default
asound.conf in BSP over all the kits.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The card name for ALSA is generated from the model name string and
is limited to 16 characters. Use a shorter name to prevent cutting the
name.
Since nearly all starter kit mainboards for i.MX based SoM by TQ-Systems
use the same codec with the same routing on board it is a good idea to
use the same mode name for the sound card. This allows sharing a default
asound.conf in BSP over all the kits.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The card name for ALSA is generated from the model name string and
is limited to 16 characters. Use a shorter name to prevent cutting the
name.
Since nearly all starter kit mainboards for i.MX based SoM by TQ-Systems
use the same codec with the same routing on board it is a good idea to
use the same mode name for the sound card. This allows sharing a default
asound.conf in BSP over all the kits.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
On the i.MX5 chips the peripheral interrupts are represented directly only
by their interrupt numbers.
The CCM nodes are not following this format and cause the following
dt-schema warnings:
ccm@73fd4000: interrupts: [[0], [71], [4], [0], [72], [4]] is too long
Fix it by passing only the two interrupt numbers.
Run-time tested in on an imx53-qsb board.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The current solution for powering off the Apalis iMX6 is not functioning
as intended. To resolve this, it is necessary to power off the
vgen2_reg, which will also set the POWER_ENABLE_MOCI signal to a low
state. This ensures the carrier board is properly informed to initiate
its power-off sequence.
The new solution uses the regulator-poweroff driver, which will power
off the regulator during a system shutdown.
Cc: <stable@vger.kernel.org>
Fixes: 4eb56e26f92e ("ARM: dts: imx6q-apalis: Command pmic to standby for poweroff")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to atmel,maxtouch.yaml, the correct property that describes
the GPIO connected to the touchscreen reset line is 'reset-gpios'.
Change it accordingly to fix the following dt-schema warning:
'reset-gpio' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
fsl,imx-iomuxc-gpr.yaml only contains the mux-controller but the actual
video-mux is not part of it. So move it below root node.
Fixes the dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx7s-mba7.dtb: iomuxc-gpr@30340000: 'csi-mux' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/soc/imx/fsl,imx-iomuxc-gpr.yaml#
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"We see the addition of eleven new SoCs, including a total of sixx
arm64 chips from Qualcomm alone. Overall, the Qualcomm platforms once
again make up the majority of all changes, after a couple of quieter
releases.
The new SoCs in this branch are:
- Microchip sama7d65 is a new 32-bit embedded chip with a single
Cortex-A7 and the current high end of the old Atmel SoC line.
- Samsung Exynos 9810 is a mobile phone chip used in some older
phones like the Samsung Galaxy S9
- Renesas R-Car V4H ES3.0 (R8A779G3) is an updated version of the V4H
(R8A779G0) low-power automotive SoC
- Renesas RZ/G3E (R0A09G047) is a family of embedded chips using
Cortex-A55 cores
- Qualcomm Snapdragon 8 Elite (SM8750) is a new phone chip based on
Qualcomm's Oryon CPU cores.
- Qualcomm Snapdragon AR2 (SAR2130P) is a SoC for augmented reality
glasses.
- Qualcomm IQ6 (QCS610) and IQ8 (QCS8300) are two industrial IOT
platforms.
- Snapdragon 425 (MSM8917) is a mobile phone SoC from 2016
- Qualcomm IPQ5424 is a Wi-Fi 7 networking chip
All of the above are part of already supported SoC families that only
need new devicetree files. Two additional SoCs in new families are
part of a separate branch.
There are 48 new machines in total, including six arm32 ones based on
aspeed. broadcom, microchip and st SoCs all using Cortex-A7 cores, and
a single risc-v board, the Banana Pi R3.
The remaining ones use arm64 chips from Broadcom, Samsung, NXP,
Mediatek, Qualcomm, Renesas and Rockchips and cover development
boards, phones, laptops, industrial machines routers.
A lot of ongoing work is for cleaning up build time warnings and other
issues, in addition to the new machines and added features"
* tag 'soc-dt-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (619 commits)
arm64: tegra: Fix Tegra234 PCIe interrupt-map
arm64: dts: qcom: x1e80100-romulus: Update firmware nodes
arm64: dts: rockchip: add DTs for Firefly ITX-3588J and its Core-3588J SoM
dt-bindings: arm: rockchip: Add Firefly ITX-3588J board
arm64: dts: rockchip: Add Orange Pi 5 Max board
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max
arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi
arm64: dts: rockchip: add WLAN to rk3588-evb1 controller
arm64: dts: rockchip: increase gmac rx_delay on rk3399-puma
arm64: dts: rockchip: Delete redundant RK3328 GMAC stability fixes
arm64: tegra: Disable Tegra234 sce-fabric node
arm64: tegra: Fix typo in Tegra234 dce-fabric compatible
arm64: tegra: Fix DMA ID for SPI2
arm64: dts: qcom: msm8916-samsung-serranove: Add display panel
arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: Remove unused and undocumented properties
arm64: dts: qcom: sdm450-lenovo-tbx605f: add DSI panel nodes
arm64: dts: qcom: pmi8950: add LAB-IBB nodes
arm64: dts: qcom: ipq5424: enable the download mode support
...
|
|
mdio-gpio is not a valid pattern according to mdio-gpio.yaml.
Use the generic 'mdio' name to fix the following dt-schema warnings:
'mdio-gpio' does not match '^mdio(-(bus|external))?(@.+|-([0-9]+))?$'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Currently there are 3 type of boards (imx6q|imx6qp|imx6dl-sabresd)
based on imx6qdl-sabresd.dtsi, they all do not set the dr_mode for
usbotg device node. The chipidea usb driver will configure it to otg
mode by default if the dr_mode is not set, but some testcases need to
parse the dr_mode from DT and decide the follow-up test strategy, here
set the dr_mode to otg explicitly for these 3 imx6qdl-sabresd based
boards.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to adv7180.yaml, the correct property name is
"adi,force-bt656-4".
Update it accordingly to fix several dt-schema warnings:
adv7280@21: 'adv,force-bt656-4' does not match any of the regexes: ...
imx6qdl-apalis.dtsi is the only in-tree kernel user of this property.
BSD does have a adv7180 driver, so should not be impacted.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The integrated usb phys are supplied by the 3p0 regulator, which has a
voltage range of 2.625V to 3.4V. Thus the min and max values are
corrected and the regulator added as a proper supply for the usb phys.
This fixes the following warnings during the probe of the mxs_phy
driver:
mxs_phy 20c9000.usbphy: supply phy-3p0 not found, using dummy regulator
mxs_phy 20ca000.usbphy: supply phy-3p0 not found, using dummy regulator
The regulator handling was introduced by commit `966d73152078 (usb: phy:
mxs: enable regulator phy-3p0 to improve signal qualilty, 2024-07-26)`.
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The integrated usb phys are supplied by the 3p0 regulator, which has a
voltage range of 2.625V to 3.4V. Thus the min and max values are
corrected and the regulator added as a proper supply for the usb phys.
This fixes the following warnings during the probe of the mxs_phy
driver:
mxs_phy 20c9000.usbphy: supply phy-3p0 not found, using dummy regulator
mxs_phy 20ca000.usbphy: supply phy-3p0 not found, using dummy regulator
The 3p0 regulator handling was introduced by commit 966d73152078 ("usb:
phy: mxs: enable regulator phy-3p0 to improve signal qualilty")`.
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The integrated usb phys are supplied by the 3p0 regulator, which has a
voltage range of 2.625V to 3.4V. Thus the min and max values are
corrected and the regulator added as a proper supply for the usb phys.
This fixes the following warnings during the probe of the mxs_phy
driver:
mxs_phy 20c9000.usbphy: supply phy-3p0 not found, using dummy regulator
mxs_phy 20ca000.usbphy: supply phy-3p0 not found, using dummy regulator
The 3p0 regulator handling was introduced by commit 966d73152078 ("usb:
phy: mxs: enable regulator phy-3p0 to improve signal qualilty")`.
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
One of the usdhc1 controller's clocks should be IMXRT1050_CLK_AHB_PODF not
IMXRT1050_CLK_OSC.
Fixes: 1c4f01be3490 ("ARM: dts: imx: Add i.MXRT1050-EVK support")
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The regulator-fec*-pwdn regulators were used to deassert the PWDN signal
of ethernet PHY, e.g. not powering. This is not necessary as the line
has a pull-up already.
Instead of the combo pad of the PHY for IRQ support.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
VCC3V3 is used twice, resulting in the debugfs warning:
debugfs: Directory 'VCC3V3' with parent 'regulator' already present!
The power supply provided by reg_vcc_3v3 is actually the same as
reg_mba_3v3.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The SD card is directly supplied by VCC3V3. Remove superfluous regulator.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
These voltages are provided unconditionally from external power supply and
are input voltages to various dedicated, switchable, power rails.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add missing supply for LM75. Fixes the kernel warning:
lm75 0-0048: supply vs not found, using dummy regulator
Fixes: c9d4affbe60a ("ARM: dts: imx: tqma7: add lm75a sensor (rev. 01xxx)")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
