| Age | Commit message (Collapse) | Author |
|---|
|
mdio-gpio is not a valid pattern according to mdio-gpio.yaml.
Use the generic 'mdio' name to fix the following dt-schema warnings:
'mdio-gpio' does not match '^mdio(-(bus|external))?(@.+|-([0-9]+))?$'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Currently there are 3 type of boards (imx6q|imx6qp|imx6dl-sabresd)
based on imx6qdl-sabresd.dtsi, they all do not set the dr_mode for
usbotg device node. The chipidea usb driver will configure it to otg
mode by default if the dr_mode is not set, but some testcases need to
parse the dr_mode from DT and decide the follow-up test strategy, here
set the dr_mode to otg explicitly for these 3 imx6qdl-sabresd based
boards.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to adv7180.yaml, the correct property name is
"adi,force-bt656-4".
Update it accordingly to fix several dt-schema warnings:
adv7280@21: 'adv,force-bt656-4' does not match any of the regexes: ...
imx6qdl-apalis.dtsi is the only in-tree kernel user of this property.
BSD does have a adv7180 driver, so should not be impacted.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The integrated usb phys are supplied by the 3p0 regulator, which has a
voltage range of 2.625V to 3.4V. Thus the min and max values are
corrected and the regulator added as a proper supply for the usb phys.
This fixes the following warnings during the probe of the mxs_phy
driver:
mxs_phy 20c9000.usbphy: supply phy-3p0 not found, using dummy regulator
mxs_phy 20ca000.usbphy: supply phy-3p0 not found, using dummy regulator
The regulator handling was introduced by commit `966d73152078 (usb: phy:
mxs: enable regulator phy-3p0 to improve signal qualilty, 2024-07-26)`.
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The integrated usb phys are supplied by the 3p0 regulator, which has a
voltage range of 2.625V to 3.4V. Thus the min and max values are
corrected and the regulator added as a proper supply for the usb phys.
This fixes the following warnings during the probe of the mxs_phy
driver:
mxs_phy 20c9000.usbphy: supply phy-3p0 not found, using dummy regulator
mxs_phy 20ca000.usbphy: supply phy-3p0 not found, using dummy regulator
The 3p0 regulator handling was introduced by commit 966d73152078 ("usb:
phy: mxs: enable regulator phy-3p0 to improve signal qualilty")`.
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The integrated usb phys are supplied by the 3p0 regulator, which has a
voltage range of 2.625V to 3.4V. Thus the min and max values are
corrected and the regulator added as a proper supply for the usb phys.
This fixes the following warnings during the probe of the mxs_phy
driver:
mxs_phy 20c9000.usbphy: supply phy-3p0 not found, using dummy regulator
mxs_phy 20ca000.usbphy: supply phy-3p0 not found, using dummy regulator
The 3p0 regulator handling was introduced by commit 966d73152078 ("usb:
phy: mxs: enable regulator phy-3p0 to improve signal qualilty")`.
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
One of the usdhc1 controller's clocks should be IMXRT1050_CLK_AHB_PODF not
IMXRT1050_CLK_OSC.
Fixes: 1c4f01be3490 ("ARM: dts: imx: Add i.MXRT1050-EVK support")
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The regulator-fec*-pwdn regulators were used to deassert the PWDN signal
of ethernet PHY, e.g. not powering. This is not necessary as the line
has a pull-up already.
Instead of the combo pad of the PHY for IRQ support.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
VCC3V3 is used twice, resulting in the debugfs warning:
debugfs: Directory 'VCC3V3' with parent 'regulator' already present!
The power supply provided by reg_vcc_3v3 is actually the same as
reg_mba_3v3.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The SD card is directly supplied by VCC3V3. Remove superfluous regulator.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
These voltages are provided unconditionally from external power supply and
are input voltages to various dedicated, switchable, power rails.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add missing supply for LM75. Fixes the kernel warning:
lm75 0-0048: supply vs not found, using dummy regulator
Fixes: c9d4affbe60a ("ARM: dts: imx: tqma7: add lm75a sensor (rev. 01xxx)")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
There is no need to specify status = "okay"; for newly created nodes,
remove this property.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This regulator essentially controls the SHTDN# pin of the LVDS encoder.
Remove it for proper usage with 'lvds-encoder' driver.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Markus Niebel <markus.niebel@ew.tq-group.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Replace the deprecated "hp-det-gpio" and "mic-det-gpio" properties by
"hp-det-gpios" resp. "mic-det-gpios" in Freescale Generic ASoC Sound
Card device nodes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Adds a devicetree for the Kobo Clara 2E Ebook reader. It is based
on boards marked with "37NB-E60K2M+4A2" or "37NB-E60K2M+4B0". It is
equipped with an i.MX6SLL SoC.
Expected to work:
- Buttons
- Wifi
- Bluetooth
(if Wifi is initialized first, driver does not handle regulators
yet)
- LED
- uSD
- USB
- RTC
- Touchscreen
Add human-readable comments for devices without mainlined driver and
binding. Such comments can e.g. be help to find testers if someone
starts to work on the missing drivers.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to fsl,imx-gpc.yaml, 'clocks', 'clock-names', and 'pgc'
are required properties.
Describe them to fix the following dt-schema warnings:
interrupt-controller@20dc000: 'clocks' is a required property
interrupt-controller@20dc000: 'clock-names' is a required property
interrupt-controller@20dc000: 'pgc' is a required property
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to fsl,imx-anatop.yaml, #thermal-sensor-cells is a required
property.
Add it to fix the following dt-schema warning:
tempmon: '#thermal-sensor-cells' is a required property
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to imx-thermal.yaml, the valid compatible string
for i.MX6SX is just: compatible = "fsl,imx6sx-tempmon".
Also pass #thermal-sensor-cells = <0> as it is a required property.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to imx-thermal.yaml, the anatop regulators should not
contain unit-address/reg entries.
Change it accordingly.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The last SPDIF clock is IMX6SLL_CLK_SPBA, so change the last
clock-name entry to 'spba' as expected by fsl,spdif.yaml.
This fixes the following dt-schema warning:
spdif@2004000: clock-names:9: 'spba' was expected
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Per fsl-imx-esdhc.yaml, the correct compatible string for i.MX7ULP is:
compatible = "fsl,imx7ulp-usdhc"
Remove the undocumented "fsl,imx6sx-usdhc" fallback compatible.
This fixes the following dt-schema warnings:
mmc@2198000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too long
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too short
'fsl,imx50-esdhc' was expected
...
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Per fsl-imx-esdhc.yaml, the correct compatible string for i.MX6SL is:
compatible = "fsl,imx6sl-usdhc"
Remove the undocumented "fsl,imx6q-usdhc" fallback compatible.
This fixes the following dt-schema warnings:
mmc@2190000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too long
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too short
'fsl,imx50-esdhc' was expected
...
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Per fsl-imx-esdhc.yaml, the correct compatible string for i.MX6SX is:
compatible = "fsl,imx6sx-usdhc"
Remove the undocumented "fsl,imx6sl-usdhc" fallback compatible.
This fixes the following dt-schema warnings:
mmc@2198000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too long
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too short
'fsl,imx50-esdhc' was expected
...
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Per fsl,imxgpt.yaml, the i.MX6SL GPT compatible should be described as:
compatible = "fsl,imx6sl-gpt", "fsl,imx6dl-gpt";
Do as suggested to fix the following dt-schema warnings:
timer@2098000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6sl-gpt'] is too short
'fsl,imx1-gpt' was expected
'fsl,imx21-gpt' was expected
'fsl,imx27-gpt' was expected
'fsl,imx31-gpt' was expected
'fsl,imx6sl-gpt' is not one of ['fsl,imx25-gpt', 'fsl,imx50-gpt', 'fsl,imx51-gpt', 'fsl,imx53-gpt', 'fsl,imx6q-gpt']
'fsl,imx6dl-gpt' was expected
'fsl,imx6sl-gpt' is not one of ['fsl,imx6ul-gpt', 'fsl,imx7d-gpt']
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Drop space between node name and opening brace {.
No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx6q-mba6
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
make dtbs_check has below warning:
arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dtb: usbphy@20c9000: fsl,tx-d-cal: 5 is less than the minimum of 79
from schema $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml#
According to schema, valid value of fsl,tx-d-cal is from 79 to 119. This
will convert register raw value <0x5> to corresponding <106>.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fix anatop thermal related dtbs_check warnings about node name
and missing thermal-cells property.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the DH electronics i.MX6DL DHCOM SoM and a PDK2 evaluation
board. The evaluation board features three serial ports, USB OTG, USB host
with an USB hub, Fast or Gigabit ethernet, eMMC, uSD, SD, analog audio,
PCIe and HDMI video output.
All of the aforementioned features except for mSATA are supported, mSATA
is not available on i.MX6DL and is only available on DHCOM populated with
i.MX6Q SoC which is already supported upstream.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add missing panel power-supply property to DT to fix the following warning.
The power supply on this device is very simple chain of regulators from the
main 24V input, describe those.
"
arch/arm/boot/dts/nxp/imx/imx6q-dhcom-pdk2.dtb: panel: 'power-supply' is a required property
"
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings do not allow address/size-cells in GPIO keys and the GPIO keys
is not a bus, see dtbs_check warning:
"
arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-pdk2.dtb: gpio-keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+'
"
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Drop unused regulator-suspend-mem-microvolt property from PMIC regulator nodes.
This property is not used by either U-Boot, Linux, nor is it documented in the
DT bindings, remove it.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Update the audio card name for Colibri iMX7 to match its specific SoM
name, making it compliant with the other names for Colibri iMX6 and
Apalis iMX6.
While this is a breaking change for userspace tooling, it seems
time to implement it since no ALSA UCM or related configuration files
currently exist and we are in the the process of creating them.
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Update the audio card name for Colibri iMX6 to match its specific SoM
name, making it less than 15 characters to fix the following warning
fsl-asoc-card sound: ASoC: driver name too long
'imx6dl-colibri-sgtl5000' -> 'imx6dl-colibri-'
making it compliant with the ALSA configuration specification [1].
While this is a breaking change for userspace tooling, it seems
time to implement it since no ALSA UCM or related configuration files
currently exist and we are in the the process of creating them.
[1] Documentation/sound/alsa-configuration.rst
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Update the audio card name for Apalis iMX6 to match its specific SoM
name, making it less than 15 characters to fix the following warning
fsl-asoc-card sound: ASoC: driver name too long 'imx6q-apalis-sgtl5000'
-> 'imx6q-apalis-sg'
making it compliant with the ALSA configuration specification [1].
While this is a breaking change for userspace tooling, it seems
time to implement it since no ALSA UCM or related configuration files
currently exist and we are in the the process of creating them.
[1] Documentation/sound/alsa-configuration.rst
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Each DHSOM uses three digits in the Cnnn part, drop the trailing zero.
This is a change in comment, no functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Per fixed-clock.yaml, it is not correct to pass unit address and
reg to represent 'fixed-clock'.
Remove it to fix the following dt-schema warning:
clock@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/linux-arm-kernel/172808887941.121658.5039774358299826312.robh@kernel.org/
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The 'turn-on-delay-ms' property is not documented nor used anywhere else.
Remove this invalid property to fix the following dt-schema warning:
Unevaluated properties are not allowed ('turn-on-delay-ms' was unexpected)
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add dma support on uart8.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add dma support on uart1, uart2, uart3, uart4, uart5, uart6 and uart7.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
