summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/exynos4210-origen.dts
AgeCommit message (Collapse)Author
2023-06-21ARM: dts: Move .dts files to vendor sub-directoriesRob Herring
The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2023-04-03ARM: dts: exynos: add mmc aliasesHenrik Grimler
Add aliases for eMMC, SD card and WiFi where applicable, so that assigned mmc indeces are always the same. Co-developed-by: Anton Bambura <jenneron@protonmail.com> Signed-off-by: Anton Bambura <jenneron@protonmail.com> [ Tested on exynos5800-peach-pi ] Tested-by: Valentine Iourine <iourine@iourine.msk.su> Signed-off-by: Henrik Grimler <henrik@grimler.se> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20230402144724.17839-3-henrik@grimler.se Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-02-09ARM: dts: exynos: align status led name with bindings on Origen4210Krzysztof Kozlowski
The "status" is a reserved keyword and LED nodes should have generic prefix: exynos4210-origen.dtb: leds: status: {'gpios': [[76, 3, 1]], 'function': ['heartbeat'], 'linux,default-trigger': ['heartbeat']} is not of type 'array' Link: https://lore.kernel.org/r/20230207210020.677007-4-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-06-22ARM: dts: exynos: add function to LED node in Origen 4210Krzysztof Kozlowski
Add common LED property - the function - to LED node in Origen 4210. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220620175716.132143-2-krzysztof.kozlowski@linaro.org
2022-06-15ARM: dts: exynos: align gpio-key node names with dtschemaKrzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern (e.g. with key/button/switch). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220609114047.380793-8-krzysztof.kozlowski@linaro.org
2022-01-23ARM: dts: exynos: align pinctrl with dtschema in Exynos4210Krzysztof Kozlowski
Align the pin controller related nodes with dtschema. No functional change expected. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220111201722.327219-5-krzysztof.kozlowski@canonical.com
2021-09-30ARM: dts: exynos: use spaces instead of tabs around '='Krzysztof Kozlowski
Use spaces in Origen boards instead of tabs around '=' for simple property assignments, to match coding style. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210928084949.27939-13-krzysztof.kozlowski@canonical.com
2020-10-28ARM: dts: exynos: adjust node names to DT spec in Exynos4210 boardsKrzysztof Kozlowski
The Devicetree specification expects device node names to have a generic name, representing the class of a device. Also the convention for node names is to use hyphens, not underscores. No functional changes. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201027170947.132725-3-krzk@kernel.org
2020-09-02ARM: dts: exynos: Add CPU cooling in Exynos4210 OrigenKrzysztof Kozlowski
Add missing cooling devices for CPU thermal zones in Exynos4210 Origen board. This allows to scale down CPU frequency (and voltage) in case of thermal pressure. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-19-krzk@kernel.org
2020-09-02ARM: dts: exynos: Correct S3C RTC bindings and enable it in OrigenKrzysztof Kozlowski
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC (Maxim MAX8997). However there is no clock provided for the PMIC and the driver registers the clock as regulator. This is an old driver which will not be updated so add a workaround: 1. Enable the "clock" regulator in PMIC, 2. Add a fixed-clock to fill missing clock phandle reference in S3C RTC. This allows to enable the S3C RTC and fixes dtbs_check warnings: arch/arm/boot/dts/exynos4210-origen.dt.yaml: rtc@10070000: clocks: [[5, 346]] is too short arch/arm/boot/dts/exynos4210-origen.dt.yaml: rtc@10070000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200830135200.24304-4-krzk@kernel.org
2020-04-13ARM: dts: exynos: Correct regulator namesMarek Szyprowski
Both CPU-freq and dev-freq drivers support proper regulator lookup from device-tree, so the early introduced hacks for registering main ARM VDD regulator under 'vdd_arm' name are no longer needed. Similar for devfreq. Fix this by removing the obsolete comments and changing the regulator names to the one, which match the schematics and style for the given board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-06-24ARM: dts: exynos: Add GPU/Mali 400 node to Exynos4Krzysztof Kozlowski
Add nodes for GPU (Mali 400) to Exynos4210 and Exynos4412. Describe the GPU as much as possible however still few elements are missing: 1. Exynos4210 bus clock is not described in hardware manual therefore the IP gate clock was provided, 2. Exynos4412: Not sure what to do with CLK_G3D clock responsible for gating entire IP block (it is now being disabled as unused), 3. Regulator supplies on Trats board. Limited testing on Odroid U3 (Exynos4412). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-10ARM: dts: exynos: Remove console argument from bootargsKrzysztof Kozlowski
Remove the "console=ttySAC..." argument from DTSes having a proper stdout-path property. To make the code functionally equivalent, add the serial port baud rate and parity. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2018-09-06ARM: dts: exynos: Disable pull control for MAX8997 interrupts on OrigenMarek Szyprowski
PMIC_IRQB and PMIC_KEYINB lines on Exynos4210-based Origen board have external pull-up resistors, so disable any pull control for those lines in respective pin controller node. This fixes support for MAX8997 interrupts and enables operation of wakeup from MAX8997 RTC alarm. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 17419726aaa1 ("ARM: dts: add max8997 device node for exynos4210-origen board") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-04-29ARM: dts: exynos: Remove regulators node container in Origen and N710xKrzysztof Kozlowski
Consistently put fixed regulators directly below root node, instead of artificial "regulators" node in Exynos4210 Origen and Exynos4412 N710x. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-04-29ARM: dts: exynos: Remove unnecessary address/size properties in OrigenKrzysztof Kozlowski
The children of gpio_keys node do not have reg/ranges properties so remove address-cells and size-cells properties. This fixes warnings for Exynos4210 Origen: arch/arm/boot/dts/exynos4210-origen.dtb: Warning (avoid_unnecessary_addr_size): /gpio_keys: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-04-16ARM: dts: exynos: Add support for USB OTG port on Origen boardMarek Szyprowski
Add support for USB OTG port on Insignal Origen Exynos4210-based evaluation board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-01-03ARM: dts: exynos: Add SPDX license identifiersKrzysztof Kozlowski
Replace GPL v2.0 license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-06-07ARM: dts: exynos: Use human-friendly symbols for interrupt flags in board ↵Krzysztof Kozlowski
sources Replace hard-coded values of interrupt flags with respective macros from header to increase code readability. Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-03-13ARM: dts: exynos: Enable watchdog on all Exynos4 boardsKrzysztof Kozlowski
Watchdog module does not have external dependencies so it can be safely enabled in exynos4.dtsi thus making it available for all Exynos4-based boards. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net>
2016-09-01ARM: dts: exynos: Add missing unit name to memory nodes in Exynos4 DTSJavier Martinez Canillas
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-09-01ARM: dts: exynos: Remove skeleton.dtsi usage for Exynos4Javier Martinez Canillas
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2e141 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-06-08ARM: dts: exynos: enable MFC device for all boardsMarek Szyprowski
MFC device can be used without any external hardware dependencies (when IOMMU is enabled), so it can be enabled by default (like it has been already done for Exynos 542x platforms). This unifies handling of this device for Exynos3250, Exynos4 and Exynos542x platforms. Board can still include exynos-mfc-reserved-memory.dtsi to enable using this device without IOMMU being enabled. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-06-08ARM: dts: exynos: move MFC reserved memory regions from boards to .dtsiMarek Szyprowski
This patch moves assigning reserved memory regions from each board dts to common exynos-mfc-reserved-memory.dtsi file, where those regions are defined. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-06-06ARM: dts: exynos: Convert MFC device to generic reserved memory bindingsMarek Szyprowski
This patch replaces custom properties for defining reserved memory regions with generic reserved memory bindings for MFC video codec device. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> [k.kozlowski: Add Samsung copyrights] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-01-29ARM: dts: Replace legacy *,wakeup property with wakeup-source for exynos boardsSudeep Holla
Though the keyboard and other driver will continue to support the legacy "gpio-key,wakeup", "linux-keypad,wakeup" boolean property to enable the wakeup source, "wakeup-source" is the new standard binding. This patch replaces all the legacy wakeup properties with the unified "wakeup-source" property in order to avoid any further copy-paste duplication. Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-12-29ARM: dts: Unify G2D device node with other devices on exynos4Marek Szyprowski
G2D device is always available and doesn't depend on any external (board specific) peripherals, so it can be unconditionally enabled. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-10-08ARM: dts: Use GPIO constants for flags cells in exynos4120 boardsJavier Martinez Canillas
The board DTS are using numeric values instead of the defined GPIO constanst to express polarity, use them to make the DTS more clear. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-07-21ARM: dts: add CPU OPP and regulator supply property for exynos4210Thomas Abraham
For Exynos4210 platforms, add CPU operating points and CPU regulator supply properties for migrating from Exynos specific cpufreq driver to using generic cpufreq driver. Cc: Doug Anderson <dianders@chromium.org> Cc: Andreas Faerber <afaerber@suse.de> Cc: Sachin Kamat <sachin.kamat@linaro.org> Cc: Andreas Farber <afaerber@suse.de> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> [b.zolnierkie: removed exynos5250 and exynos5420 support for now] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [k.kozlowski: Rebased, moved cpu nodes to alphabetical position] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-06-03ARM: dts: Use labels for overriding nodes in exynos4210-origenKrzysztof Kozlowski
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-02ARM: dts: exynos4: Add stdout-path propertiesTomasz Figa
This patch adds stdout-path property to chosen nodes of Exynos4 boards to enable use of earlycon feature without the need to hardcode port number in kernel itself. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-31ARM: dts: use key code macros on Origen and Arndale boardsSachin Kamat
Key code macros improve readability on exnos4210-origen, exynos4412-origen and exynos5250-arndale boards. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> [kgene.kim@samsung.com: squashed similar two patches] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-31ARM: dts: enable RTC and WDT nodes on Origen boardsSachin Kamat
Enabled RTC and WDT nodes on exynos4210-origen and exynos4412-origen boards. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> [kgene.kim@samsung.com: squashed similar two patches] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-03-21ARM: dts: Update Exynos DT files with generic compatible stringsSachin Kamat
Add generic compatible strings to the respective board DT files. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-16ARM: dts: Update display clock frequency for Origen-4210Tushar Behera
As per the timing information for supported panel, the value should be between 47.2 MHz to 47.9 MHz for 60Hz refresh rate. Total horizontal pixels = 1024 (x-res) + 80 (margin) + 48 (hsync) = 1152 Total vertical pixels = 600 (y-res) + 80 (margin) + 3 (vsync) = 683 Target pixel clock rate for refresh rate @60 Hz = 1152 * 683 * 60 = 47208960 Hz ~ 47.5 MHz Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-11-11Merge tag 'dt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "Most of this branch consists of updates, additions and general churn of the device tree source files in the kernel (arch/arm/boot/dts). Besides that, there are a few things to point out: - Lots of platform conversion on OMAP2+, with removal of old board files for various platforms. - Final conversion of a bunch of ux500 (ST-Ericsson) platforms as well - Some updates to pinctrl and other subsystems. Most of these are for DT-enablement of the various platforms and acks have been collected" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (385 commits) ARM: dts: bcm11351: Use GIC/IRQ defines for sdio interrupts ARM: dts: bcm: Add missing UARTs for bcm11351 (bcm281xx) ARM: dts: bcm281xx: Add card detect GPIO ARM: dts: rename ARCH_BCM to ARCH_BCM_MOBILE (dt) ARM: bcm281xx: Add device node for the GPIO controller ARM: mvebu: Add Netgear ReadyNAS 104 board ARM: tegra: fix Tegra114 IOMMU register address ARM: kirkwood: add support for OpenBlocks A7 platform ARM: dts: omap4-panda: add DPI pinmuxing ARM: dts: AM33xx: Add RNG node ARM: dts: AM33XX: Add hwspinlock node ARM: dts: OMAP5: Add hwspinlock node ARM: dts: OMAP4: Add hwspinlock node ARM: dts: use 'status' property for PCIe nodes ARM: dts: sirf: add missed address-cells and size-cells for prima2 I2C ARM: dts: sirf: add missed cell, cs and dma channel for SPI nodes ARM: dts: sirf: add missed graphics2d iobg in atlas6 dts ARM: dts: sirf: add missed chhifbg node in prima2 and atlas6 dts ARM: dts: sirf: add missed memcontrol-monitor node in prima2 and atlas6 dts ARM: mvebu: Add the core-divider clock to Armada 370/XP ...
2013-10-16ARM: dts: Work around lack of cpufreq regulator lookup for exynos4210-origen ↵Tomasz Figa
and trats boards Exynos cpufreq drivers does not support device tree based regulator lookup, so it can get the VDD ARM regulator only by its name. To get cpufreq working for now, this patch works this around by renaming the regulator in board dts files to vdd_arm, which is the name expected by the driver. This fixes a regression introduced by dropping support of board file based bootup of Exynos 4210 boards that rendered cpufreq inoperable on Trats and Origen boards. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-10-06ARM: dts: Add fixed voltage regulator to simple bus for origenSachin Kamat
This has been done for Arndale board vide commit aa3edb65 ("ARM: dts: Put Arndale fixed voltage regulators on a simple-bus"). Replicate here for consistency and correctness. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: dts: use #include for all device trees for SamsungPadmavathi Venna
Replace /include/ (dtc) with #include (C pre-processor) for all Samsung DT files Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: dts: Set BUCK7 as always on for Origen boardTushar Behera
The LDO for LCD driver is currently not handled by any of the drivers. This disables the LDO during booting time. To fix this, the LDO is forced to enabled always. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: dts: Add FIMD node to Origen4210 boardSachin Kamat
Added FIMD and display timing node to Origen4210 board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-10ARM: dts: add max8997 device node for exynos4210-origen boardThomas Abraham
Add max8997 regulator device node for exynos4210-origen board and list all the supported regulators. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-10ARM: dts: Enable TMU on Origen4210 boardSachin Kamat
Enables TMU on Origen4210 board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-09ARM: dts: Add G2D node to exynos4210-origenSachin Kamat
Added G2D DT node to Origen4210 board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-25ARM: dts: add board specific fixed rate clock nodes for Exynos based platformsThomas Abraham
The clock frequency of xxti and xusbxti clocks is dependent on the frequency of the on-board oscillator that is used to generate these clocks. So allow the frequency of these clocks to be specfied from device tree. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: Add MFC codec support to Origen DTSachin Kamat
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22ARM: dts: Add vmmc fixed voltage regulator for exynos4210-origenTomasz Figa
This patch adds fixed voltage vmmc regulator to dts file of Origen board. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22ARM: dts: Update sdhci nodes for current bindings for exynos4210-origenTomasz Figa
This patch modifies sdhci nodes present in Origen device tree source to use current generic mmc bindings. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22ARM: dts: Update for pinctrl-samsung driver for exynos4210-origenTomasz Figa
This patch updates all parts of Origen dts related to pin configuration to use new GPIO and pinctrl bindings, instead of (now unsupported on Exynos4) legacy gpio-samsung bindings. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22ARM: dts: Split memory sections for exynos4210-origenTomasz Figa
This patch changes memory configuration defined in dts file of Origen board from single 1 GiB section into four 256 MiB sections to match section size limit. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 05:45:01 +0000