summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/soc
AgeCommit message (Collapse)Author
3 daysMerge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This is the usual collection of primarily clk driver updates. The big part of the diff is all the new Qualcomm clk drivers added for a few SoCs they're working on. The other two vendors with significant work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks to existing drivers and supports some new SoCs while Amlogic is starting a significant refactoring to simplify their code. The core framework gained a pair of helpers to get the 'struct device' or 'struct device_node' associated with a 'struct clk_hw'. Some associated KUnit tests were added for these simple helpers as well. Beyond that core change there are lots of little fixes throughout the clk drivers for the stuff we see every day, wrong clk driver data that affects tree topology or supported frequencies, etc. They're not found until the clks are actually used by some consumer device driver. New Drivers: - Global, display, gpu, video, camera, tcsr, and rpmh clock controller for the Qualcomm Milos SoC - Camera, display, GPU, and video clock controllers for Qualcomm QCS615 - Video clock controller driver for Qualcomm SM6350 - Camera clock controller driver for Qualcomm SC8180X - I3C clocks and resets on Renesas RZ/G3E - Expanded Serial Peripheral Interface (xSPI) clocks and resets on Renesas RZ/V2H(P) and RZ/V2N - SPI (RSPI) clocks and resets on Renesas RZ/V2H(P) - SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H - Ethernet clocks and resets on Renesas RZ/G3E - Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs - Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N - Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas RZ/V2N Updates: - Support atomic PWMs in the PWM clk driver - clk_hw_get_dev() and clk_hw_get_of_node() helpers - Replace round_rate() with determine_rate() in various clk drivers - Convert clk DT bindings to DT schema format for DT validation - Various clk driver cleanups and refactorings from static analysis tools and possibly real humans - A lot of little fixes here and there to things like clk tree topology, missing frequencies, flagging clks as critical, etc" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits) clk: clocking-wizard: Fix the round rate handling for versal clk: Fix typos clk: spacemit: ccu_pll: fix error return value in recalc_rate callback clk: tegra: periph: Make tegra_clk_periph_ops static clk: tegra: periph: Fix error handling and resolve unsigned compare warning clk: imx: scu: convert from round_rate() to determine_rate() clk: imx: pllv4: convert from round_rate() to determine_rate() clk: imx: pllv3: convert from round_rate() to determine_rate() clk: imx: pllv2: convert from round_rate() to determine_rate() clk: imx: pll14xx: convert from round_rate() to determine_rate() clk: imx: pfd: convert from round_rate() to determine_rate() clk: imx: frac-pll: convert from round_rate() to determine_rate() clk: imx: fracn-gppll: convert from round_rate() to determine_rate() clk: imx: fixup-div: convert from round_rate() to determine_rate() clk: imx: cpu: convert from round_rate() to determine_rate() clk: imx: busy: convert from round_rate() to determine_rate() clk: imx: composite-93: remove round_rate() in favor of determine_rate() clk: imx: composite-8m: remove round_rate() in favor of determine_rate() clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls clk: imx: Remove redundant pm_runtime_mark_last_busy() calls ...
5 daysMerge branches 'clk-renesas', 'clk-samsung', 'clk-spacemit', 'clk-allwinner' ↵Stephen Boyd
and 'clk-amlogic' into clk-next * clk-renesas: (42 commits) clk: renesas: r9a08g045: Add MSTOP for coupled clocks as well clk: renesas: r9a09g047: Add clock and reset signals for the GBETH IPs clk: renesas: r9a09g057: Add XSPI clock/reset clk: renesas: r9a09g056: Add XSPI clock/reset clk: renesas: rzv2h: Add fixed-factor module clocks with status reporting clk: renesas: r9a09g057: Add support for xspi mux and divider clk: renesas: r9a09g056: Add support for xspi mux and divider clk: renesas: r9a09g077: Add RIIC module clocks clk: renesas: r9a09g077: Add PLL2 and SDHI clock support clk: renesas: rzv2h: Drop redundant base pointer from pll_clk clk: renesas: r9a09g057: Add entries for the RSPIs dt-bindings: clock: renesas,r9a09g077/87: Add SDHI_CLKHS clock ID dt-bindings: clock: renesas,r9a09g056/57-cpg: Add XSPI core clock clk: renesas: rzv2h: Add missing include file clk: renesas: rzv2h: Use devm_kmemdup_array() clk: renesas: Add CPG/MSSR support to RZ/N2H SoC clk: renesas: r9a09g077: Add PCLKL core clock dt-bindings: clock: renesas,cpg-mssr: Document RZ/N2H support dt-bindings: soc: renesas: Document RZ/N2H (R9A09G087) SoC dt-bindings: clock: renesas,r9a09g077: Add PCLKL core clock ID ... * clk-samsung: clk: samsung: exynosautov920: add block hsi2 clock support dt-bindings: clock: exynosautov920: add hsi2 clock definitions dt-bindings: clock: exynosautov920: sort clock definitions clk: samsung: exynos850: fix a comment clk: samsung: gs101: fix alternate mout_hsi0_usb20_ref parent clock clk: samsung: gs101: fix CLK_DOUT_CMU_G3D_BUSD * clk-spacemit: clk: spacemit: ccu_pll: fix error return value in recalc_rate callback reset: spacemit: add support for SpacemiT CCU resets clk: spacemit: mark K1 pll1_d8 as critical clk: spacemit: define three reset-only CCUs clk: spacemit: set up reset auxiliary devices soc: spacemit: create a header for clock/reset registers dt-bindings: soc: spacemit: define spacemit,k1-ccu resets * clk-allwinner: clk: sunxi-ng: ccu_nm: convert from round_rate() to determine_rate() clk: sunxi-ng: ccu_nkmp: convert from round_rate() to determine_rate() clk: sunxi-ng: ccu_nk: convert from round_rate() to determine_rate() clk: sunxi-ng: ccu_gate: convert from round_rate() to determine_rate() clk: sunxi-ng: v3s: Assign the de and tcon clocks to the video pll clk: sunxi-ng: v3s: Fix de clock definition clk: sunxi-ng: sun55i-a523-r-ccu: Add missing PPU0 reset dt-bindings: reset: sun55i-a523-r-ccu: Add missing PPU0 reset * clk-amlogic: clk: amlogic: s4: remove unused data clk: amlogic: drop clk_regmap tables clk: amlogic: get regmap with clk_regmap_init clk: amlogic: remove unnecessary headers clk: amlogic: axg-audio: use the auxiliary reset driver
6 daysMerge tag 'soc-drivers-6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "Changes are all over the place, but very little sticks out as noteworthy. There is a new misc driver for the Raspberry Pi 5's RP1 multifunction I/O chip, along with hooking it up to the pinctrl and clk frameworks. The reset controller and memory subsystems have mainly small updates, but there are two new reset drivers for the K230 and VC1800B SoCs, and new memory driver support for Tegra264. The ARM SMCCC and SCMI firmware drivers gain a few more features that should help them be supported across more environments. Similarly, the SoC specific firmware on Tegra and Qualcomm get minor enhancements and chip support. In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an overhaul for code robustness, the Tegra and Qualcomm and NXP drivers grow to support more chips, while the Hisilicon, Mediatek and Renesas drivers see mostly janitorial fixes" * tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits) bus: del unnecessary init var soc: fsl: qe: convert set_multiple() to returning an integer pinctrl: rp1: use new GPIO line value setter callbacks soc: hisilicon: kunpeng_hccs: Fix incorrect log information dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface soc: qcom: socinfo: Add support to retrieve APPSBL build details soc: qcom: pmic_glink: fix OF node leak soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs soc: qcom: socinfo: Add SoC IDs for SM7635 family dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family firmware: qcom: scm: request the waitqueue irq *after* initializing SCM firmware: qcom: scm: initialize tzmem before marking SCM as available firmware: qcom: scm: take struct device as argument in SHM bridge enable firmware: qcom: scm: remove unused arguments from SHM bridge routines soc: qcom: rpmh-rsc: Add RSC version 4 support memory: tegra: Add Tegra264 MC and EMC support firmware: tegra: bpmp: Fix build failure for tegra264-only config ...
6 daysMerge tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull SoC devicetree updates from Arnd Bergmann: "There are a few new variants of existing chips: - mt6572 is an older mobile phone chip from mediatek that was extremely popular a decade ago but never got upstreamed until now - exynos2200 is a recent high-end mobile phone chip used in a few Samsung phones like the Galaxy S22 - Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M (R8A779H0) and used in automotive applications - Tegra264 is a new chip from NVIDIA, but support is fairly minimal for now, and not much information is public about it There are five more chips in a separate branch, as those are new chip families that I merged along with the necessary infrastructure. New board support is not that exciting, with a total of 33 newly added machines here: - Evaluation platforms for the chips above, plus TI am62d2 and Sophgo sg2042 - Six 32-bit industrial boards based on stm32, imx6 and am33 chips, plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and imx95 - Two newly added ASPEED BMC based motherboards, and one that got removed - Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit msm8976 SoCs - Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1 - A set-top box based on Amlogic meson-gxm Updates for existing machines are spread over all the above families. One notable change here is support for the RP1 I/O chip used in Raspberry Pi 5" * tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (606 commits) riscv: dts: sophgo: fix mdio node name for CV180X riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings riscv: dts: sophgo: add ethernet GMAC device for sg2042 riscv: dts: sophgo: Enable ethernet device for Huashan Pi riscv: dts: sophgo: Add mdio multiplexer device for cv18xx riscv: dts: sophgo: Add ethernet device for cv18xx riscv: dts: sophgo: sg2044: add pmu configuration riscv: dts: sophgo: sg2044: add ziccrse extension riscv: dts: sophgo: add zfh for sg2042 riscv: dts: sophgo: add ziccrse for sg2042 riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree riscv: dts: sophgo: sg2044: add PCIe device support for SG2044 riscv: dts: sophgo: sg2044: add MSI device support for SG2044 riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000 riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property ...
6 daysMerge tag 'devicetree-for-6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Add bindings for arm,armv7m-nvic, fsl,icoll, fsl,imx23-digctl, Xilinx INTC, Analog Devices ADT7411, and a bunch of trivial hwmon devices - Convert fsl,vf610-mscm-ir, fsl,dsu, via,vt8500-timer, nxp,isp1301, Marvell Armada NETA and BM, apm,xgene1-msi, fsl,mpic-msi, himax,hx8357d, and sitronix,st7586 bindings to DT schema format - Fixes for some display bindings - More indentation clean-ups in examples - Add more guidelines and clarifications on writing bindings * tag 'devicetree-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (31 commits) dt-bindings: Correct indentation and style in DTS example dt-bindings: display: mediatek,dp: Allow DisplayPort AUX bus dt-bindings: fsl: convert fsl,vf610-mscm-ir.txt to yaml format dt-bindings: interrupt-controller: Add fsl,icoll.yaml dt-bindings: interrupt-controller: Add missing Xilinx INTC binding dt-bindings: display: sprd,sharkl3-dsi-host: Fix missing clocks constraints dt-bindings: display: sprd,sharkl3-dpu: Fix missing clocks constraints dt-bindings: display: imx: convert fsl,dcu.txt to yaml format dt-bindings: timer: via,vt8500-timer: Convert to YAML dt-bindings: net: Convert Marvell Armada NETA and BM to DT schema dt-bindings: trivial-devices: Add undocumented hwmon devices dt-bindings: interrupt-controller: Convert apm,xgene1-msi to DT schema dt-bindings: gpu: mali-bifrost: Add Allwinner A523 compatible docs: dt: writing-schema: Document preferred order of properties docs: dt: writing-bindings: Document discouraged instance IDs docs: dt: writing-bindings: Document compatible and filename naming docs: dt: submitting-patches: Avoid 'YAML' in the subject and add an example MAINTAINERS: adjust file entry in INTEL STRATIX10 FIRMWARE DRIVERS docs: dt: writing-bindings: Consistently use single-whitespace docs: dt: writing-bindings: Express better expectations of "specific" ...
6 daysMerge tag 'tty-6.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.17-rc1. Included in here is the following types of changes: - another cleanup round from Jiri for the 8250 serial driver and some other tty drivers, things are slowly getting better with our apis thanks to this work. This touched many tty drivers all over the tree. - qcom_geni_serial driver update for new platforms and devices - 8250 quirk handling fixups - dt serial binding updates for different boards/platforms - other minor cleanups and fixes All of these have been in linux-next with no reported issues" * tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits) dt-bindings: serial: snps-dw-apb-uart: Allow use of a power-domain serial: 8250: fix panic due to PSLVERR dt-bindings: serial: samsung: add samsung,exynos2200-uart compatible vt: defkeymap: Map keycodes above 127 to K_HOLE vt: keyboard: Don't process Unicode characters in K_OFF mode serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms serial: qcom-geni: Enable PM runtime for serial driver serial: qcom-geni: move clock-rate logic to separate function serial: qcom-geni: move resource control logic to separate functions serial: qcom-geni: move resource initialization to separate function soc: qcom: geni-se: Enable QUPs on SA8255p Qualcomm platforms dt-bindings: qcom: geni-se: describe SA8255p dt-bindings: serial: describe SA8255p serial: 8250_dw: Fix typo "notifer" dt-bindings: serial: 8250: spacemit: set clocks property as required dt-bindings: serial: renesas: Document RZ/V2N SCIF serial: 8250_ce4100: Fix CONFIG_SERIAL_8250=n build tty: omit need_resched() before cond_resched() serial: 8250_ni: Reorder local variables serial: 8250_ni: Fix build warning ...
6 daysMerge tag 'gpio-updates-for-v6.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "There's one new driver (Apple SMC) and extensions to existing drivers for supporting new HW models. A lot of different impovements across drivers and in core GPIO code. Details on that are in the signed tag as usual. We managed to remove some of the legacy APIs. Arnd Bergmann started to work on making the legacy bits optional so that we may compile them only for older platforms that still really need them. Rob Herring has done a lot of work to convert legacy .txt dt-bindings for GPIO controllers to YAML. There are only a few left now in the GPIO tree. A big part of the commits in this PR concern the conversion of GPIO drivers to using the new line value setter callbacks. This conversion is now complete treewide (unless I've missed something) and once all the changes from different trees land in mainline, I'll send you another PR containing a commit dropping the legacy callbacks from the tree. As the quest to pay back technical dept never really ends, we're starting another set of interface conversions, this time it's about moving fields specific to only a handful of drivers using the gpio-mmio helper out of the core gpio_chip structure that every controller implements and uses. This cycle we introduce a new set of APIs and convert a few drivers under drivers/gpio/, next cycle we'll convert remaining modules treewide (in gpio, pinctrl and mfd trees) and finally remove the old interfaces and move the gpio-mmio fields into their own structure wrapping gpio_chip. One last change I should mention here is the rework of the sysfs interface. In 2016, we introduced the GPIO character device as the preferred alternative to the sysfs class under /sys/class/gpio. While it has seen a wide adoption with the help of its user-space counterpart - libgpiod - there are still users who prefer the simplicity of sysfs. As far as the GPIO subsystem is concerned, the problem is not the existince of the GPIO class as such but rather the fact that it exposes the global GPIO numbers to the user-space, stopping us from ever being able to remove the numberspace from the kernel. To that end, this release we introduced a parallel, limited sysfs interface that doesn't expose these numbers and only implements a subset of features that are relevant to the existing users. This is a result of several discussions over the course of last year and should allow us to remove the legacy part some time in the future. Summary: GPIOLIB core: - introduce a parallel, limited sysfs user ABI that doesn't expose the global GPIO numbers to user-space while maintaining backward compatibility with the end goal of it completely replacing the existing interface, allowing us to remove it - remove the legacy devm_gpio_request() routine which has no more users - start the process of allowing to compile-out the legacy parts of the GPIO core for users who don't need it by introducing a new Kconfig option: GPIOLIB_LEGACY - don't use global GPIO numbers in debugfs output from the core code (drivers still do it, the work is ongoing) - start the process of moving the fields specific to the gpio-mmio helper out of the core struct gpio_chip into their own structure that wraps it: create a new header with modern interfaces and convert several drivers to using it - remove the platform data structure associated with the gpio-mmio helper from the kernel after having converted all remaining users to generic device properties - remove legacy struct gpio definition as it has no more users New drivers: - add the GPIO driver for the Apple System Management Controller Driver improvements: - add support for new models to gpio-adp5585, gpio-tps65219 and gpio-pca953x - extend the interrupt support in gpio-loongson-64bit - allow to mark the simulated GPIO lines as invalid in gpio-sim - convert all remaining GPIO drivers to using the new GPIO value setter callbacks - convert gpio-rcar to using simple device power management ops callbacks - don't check if current direction of a line is output before setting the value in gpio-pisosr and ti-fpc202: the GPIO core already handles that - also drop unneeded GPIO range checks in drivers, the core already makes sure we're within bounds when calling driver callbacks - use dev_fwnode() where applicable across GPIO drivers - set line value in gpio-zynqmp-modepin and gpio-twl6040 when the user wants to change direction of the pin to output even though these drivers don't need to do anything else to actually set the direction, otherwise a call like gpiod_direction_output(d, 1) will not result in the line driver high - remove the reduntant call to pm_runtime_mark_last_busy() from gpio-arizona - use lock guards in gpio-cadence and gpio-mxc - check the return values of regmap functions in gpio-wcd934x and gpio-tps65912 - use better regmap interfaces in gpio-wcove and gpio-pca953x - remove dummy GPIO chip callbacks from several drivers in cases where the GPIO core can already handle their absence - allow building gpio-palmas as a module Fixes: - use correct bit widths (according to the documentation) in gpio-virtio Device-tree bindings: - convert several of the legacy .txt documents for many different devices to YAML, improving automatic validation - create a "trivial" GPIO DT schema that covers a wide range of simple hardware that share a set of basic GPIO properties - document new HW: Apple MAC SMC GPIO block and adp5589 I/O expander - document a new model for pca95xx - add and/or remove properties in YAML documents for gpio-rockchip, fsl,qoriq-gpio, arm,pl061 and gpio-xilinx Misc: - some minor refactoring in several places, adding/removing forward declarations, moving defines to better places, constify the arguments in some functions, remove duplicate includes, etc. - documentation updates" * tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (202 commits) MIPS: alchemy: gpio: use new GPIO line value setter callbacks for the remaining chips gpiolib: enable CONFIG_GPIOLIB_LEGACY even for !GPIOLIB gpio: virtio: Fix config space reading. gpiolib: make legacy interfaces optional dt-bindings: gpio: rockchip: Allow use of a power-domain gpiolib: of: add forward declaration for struct device_node power: reset: macsmc-reboot: Add driver for rebooting via Apple SMC gpio: Add new gpio-macsmc driver for Apple Macs mfd: Add Apple Silicon System Management Controller soc: apple: rtkit: Make shmem_destroy optional dt-bindings: mfd: Add Apple Mac System Management Controller dt-bindings: power: reboot: Add Apple Mac SMC Reboot Controller dt-bindings: gpio: Add Apple Mac SMC GPIO block gpio: cadence: Remove duplicated include in gpio-cadence.c gpio: tps65219: Add support for TI TPS65214 PMIC gpio: tps65219: Update _IDX & _OFFSET macro prefix gpio: sysfs: Fix an end of loop test in gpiod_unexport() dt-bindings: gpio: Convert qca,ar7100-gpio to DT schema dt-bindings: gpio: Convert maxim,max3191x to DT schema dt-bindings: gpio: fsl,qoriq-gpio: Add missing mpc8xxx compatibles ...
6 daysdt-bindings: Correct indentation and style in DTS exampleKrzysztof Kozlowski
DTS example in the bindings should be indented with 2- or 4-spaces and aligned with opening '- |', so correct any differences like 3-spaces or mixtures 2- and 4-spaces in one binding. No functional changes here, but saves some comments during reviews of new patches built on existing code. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Lee Jones <lee@kernel.org> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas Link: https://lore.kernel.org/r/20250107131456.247610-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250725100241.120106-2-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
11 daysMerge tag 'samsung-drivers-6.17' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung SoC drivers for v6.17 1. Google GS101: Minor improvement PMU binding. 2. ExynosAutov920: Add HSI2 system registers binding. * tag 'samsung-drivers-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: dt-bindings: soc: samsung: exynos-sysreg: add hsi2 for ExynosAutov920 dt-bindings: soc: samsung: exynos-pmu: Constrain google,pmu-intr-gen-syscon Link: https://lore.kernel.org/r/20250723090455.25295-3-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
11 daysMerge tag 'riscv-sophgo-dt-for-v6.17' of https://github.com/sophgo/linux ↵Arnd Bergmann
into soc/dt RISC-V Devicetrees for v6.17 Sophgo: For CV18xx serials: There are three major changes. The first is to add the RTCSYS MFD node, which provides rich control registers for soc power management and other rich control functions; the second is to add the reset controller node and add related reset properties for other peripherals; the third is to add ethernet controller related nodes to the soc and enable ethernet device control for HuashanPi. For SG2042: There are three major changes. The first is to add ISA extensions such as xtheadvector/ziccrse/zfh for cpu cores; the second is add ethernet controller support; the third is add two new boards EVB_V1 & EVB_V2 which use SG2042 SoC. For SG2044: There are many changes. The first is to add pmu configuration; the second is to add ISA extensions ziccrse and add missing riscv,cbop-block-size property for cpu cores; the third is to add more peripherals nodes for SoC after clock controller is ready, such as MSI/PCIe/pwm/SPI-NOR etc. This PR also add HWMON MCU device for the sophgo-srd3-10 board and reserve uart0 node for sophgo-srd3-10 board because uart0 is already occupied by the firmware. This PR also moves sophgo.yaml from the riscv directory to soc/sophgo for sharing between riscv and arm. CV18xx SoC contains a RISC-V big core and an ARM64 big core. Moving sophgo.yaml to a shared location will help us add support for ARM cores to the CV18xx chip in the future. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * tag 'riscv-sophgo-dt-for-v6.17' of https://github.com/sophgo/linux: (32 commits) riscv: dts: sophgo: fix mdio node name for CV180X riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings riscv: dts: sophgo: add ethernet GMAC device for sg2042 riscv: dts: sophgo: Enable ethernet device for Huashan Pi riscv: dts: sophgo: Add mdio multiplexer device for cv18xx riscv: dts: sophgo: Add ethernet device for cv18xx riscv: dts: sophgo: sg2044: add pmu configuration riscv: dts: sophgo: sg2044: add ziccrse extension riscv: dts: sophgo: add zfh for sg2042 riscv: dts: sophgo: add ziccrse for sg2042 riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree riscv: dts: sophgo: sg2044: add PCIe device support for SG2044 riscv: dts: sophgo: sg2044: add MSI device support for SG2044 riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000 riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property ... Link: https://lore.kernel.org/r/MAUPR01MB1107297124C9DA0CD77DA3DC1FE5FA@MAUPR01MB11072.INDPRD01.PROD.OUTLOOK.COM Signed-off-by: Arnd Bergmann <arnd@arndb.de>
12 daysdt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindingsHan Gao
Add DT binding documentation for the Sophgo SG2042_EVB_V1.X/V2.0 board [1]. Link: https://github.com/sophgo/sophgo-hardware/tree/master/SG2042/SG2042-x8-EVB [1] Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Han Gao <rabenda.cn@gmail.com> Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com> Reviewed-by: Chen Wang <unicorn_wang@outlook.com> Link: https://lore.kernel.org/r/204c8214aa084d592e8dc45d6c5ca23381937b54.1751700954.git.rabenda.cn@gmail.com Signed-off-by: Inochi Amaoto <inochiama@gmail.com> Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
12 daysdt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000Alexander Sverdlin
Move sophgo.yaml from riscv into soc/sophgo so that it can be shared for all SoCs containing ARM cores as well. This already applies to SG2002. Add SG2000 SoC, Milk-V Duo Module 01 and Milk-V Module 01 EVB. Reviewed-by: Chen Wang <unicorn_wang@outlook.com> Reviewed-by: Inochi Amaoto <inochiama@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20250612132844.767216-2-alexander.sverdlin@gmail.com Signed-off-by: Inochi Amaoto <inochiama@gmail.com> Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
12 daysMerge tag 'ti-k3-dt-for-v6.17' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.17 Generic fixes and cleanups: * Enable overlays for all DTB files * Enable Schmitt Trigger by default in K3 pinctrl SoC specific changes: AM62D * Add new SoC support and pinctrl entries AM62 * Remove eMMC High Speed DDR support * Move eMMC pinmux to top level board file J784S4/J742S2 * Add Power on BIST (PBSIT) nodes * Add ACSPCIE1 node J721S2 * Add McASP support J722S * Add alernate audio-refclk0 node Board changes: Multiple boards * Bootphase tags for Ethernet boot support AM62D2-EVM * Add new board support AM62A7-SK * Fix pinmux for main_uart1 * Add SPI NAND support AM62P * Fix PWM_3_DSI GPIO direction, SD pull up, I2C ups on AM62P-Verdin * Add bootph-all property for Ethernet boot AM62-Verdin * Enable pull-ups on I2C buses AM654-base-board * Add boot phase tags for various bootmodes AM64 * Add boot phase tag PCIe EP boot * Fix PRU-ICSSG Ethernet ports on AM642-PhyBoard-Electra AM69-SK * Add idle-states for remaining SERDES instances J722S-EVM * Fix USB gpio-hog level for Type-C * tag 'ti-k3-dt-for-v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (33 commits) arm64: dts: ti: k3-am69-sk: Add idle-states for remaining SERDES instances arm64: dts: ti: k3-am62a7-sk: add boot phase tags arm64: dts: ti: k3-am654-base-board: add boot phase tags arm64: dts: ti: k3-am65: add boot phase tags arm64: dts: ti: k3-am69-sk: Add bootph-all property to enable Ethernet boot arm64: dts: ti: k3-j722s-evm: Add bootph-all property to enable Ethernet boot arm64: dts: ti: k3-am62p5-sk: Add bootph-all property to enable Ethernet boot arm64: dts: ti: k3-am68-sk-base-board: Add bootph-all property to enable Ethernet boot arm64: dts: ti: Add support for AM62D2-EVM arm64: dts: ti: Add pinctrl entries for AM62D2 family of SoCs dt-bindings: arm: ti: Add AM62D2 SoC and Boards arm64: dts: ti: Add bootph property to nodes at source for am62a arm64: dts: ti: k3-am62p-verdin: Adjust temperature trip points arm64: dts: ti: k3-am62p-j722s: Enable freq throttling on thermal alert arm64: dts: ti: k3-j784s4-j742s2-main-common: Add PBIST_14 node dt-bindings: soc: ti: bist: Add BIST for K3 devices arm64: dts: ti: k3-am62-main: Remove eMMC High Speed DDR support arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board file arm64: dts: ti: k3-am62a7-sk: fix pinmux for main_uart1 arm64: dts: ti: Enable overlays for all DTB files ... Link: https://lore.kernel.org/r/a0401460-8c67-4c29-a6cf-fa4bdf33bc7d@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
12 daysMerge tag 'spacemit-dt-for-6.17-1' of https://github.com/spacemit-com/linux ↵Arnd Bergmann
into soc/dt RISC-V SpacemiT DT changes for 6.17 - Add DMA translation buses - Add PWM support - Add Reset support - Add eMMC node * tag 'spacemit-dt-for-6.17-1' of https://github.com/spacemit-com/linux: riscv: dts: spacemit: Move eMMC under storage-bus for K1 riscv: dts: spacemit: Move UARTs under dma-bus for K1 riscv: dts: spacemit: Add DMA translation buses for K1 riscv: dts: spacemit: add pwm14_1 pinctrl setting riscv: dts: spacemit: add PWM support for K1 SoC riscv: dts: spacemit: add reset support for the K1 SoC dt-bindings: soc: spacemit: define spacemit,k1-ccu resets riscv: dts: spacemit: enable eMMC for K1 SoC Link: https://lore.kernel.org/r/20250715014214-GYA540030@gentoo Signed-off-by: Arnd Bergmann <arnd@arndb.de>
13 daysdt-bindings: qcom: geni-se: describe SA8255pNikunj Kela
SA8255p platform abstracts resources such as clocks, interconnect configuration in Firmware. Add DT bindings for the QUP Wrapper on sa8255p platform. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com> Co-developed-by: Praveen Talari <quic_ptalari@quicinc.com> Signed-off-by: Praveen Talari <quic_ptalari@quicinc.com> Link: https://lore.kernel.org/r/20250721174532.14022-3-quic_ptalari@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-18dt-bindings: gpio: Create a trivial GPIO schemaRob Herring (Arm)
Many simple GPIO controllers without interrupt capability have the same schema other than their compatible value. Combine all these bindings into a single schema. The criteria to be included here is must use 2 cells, have no interrupt capability, have 0 or 1 "reg" entries, and have no other resources (like clocks). Note that "ngpios" is now allowed in some cases it wasn't before and constraints on it have been dropped. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250714201959.2983482-1-robh@kernel.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-07-16dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatibleLuca Weiss
Document the Milos compatible used to describe the pmic glink on this SoC. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250713-sm7635-fp6-initial-v2-11-e8f9a789505b@fairphone.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-07-16dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side ↵Luca Weiss
channel Document the Always-On Subsystem side channel on the Milos SoC. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250713-sm7635-fp6-initial-v2-7-e8f9a789505b@fairphone.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-07-16dt-bindings: soc: samsung: exynos-sysreg: add hsi2 for ExynosAutov920Sowon Na
Add hsi2 compatible for ExynosAutov920 ufs shareability register to set io coherency of the ExynosAutov920 ufs. Signed-off-by: Sowon Na <sowon.na@samsung.com> Link: https://lore.kernel.org/r/20250702013316.2837427-4-sowon.na@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2025-07-09dt-bindings: soc: ti: bist: Add BIST for K3 devicesNeha Malcom Francis
Document the binding for TI K3 BIST (Built-In Self Test) block. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Link: https://lore.kernel.org/r/20250605063506.2005637-2-n-francis@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2025-07-03dt-bindings: soc: spacemit: define spacemit,k1-ccu resetsAlex Elder
There are additional SpacemiT syscon CCUs whose registers control both clocks and resets: RCPU, RCPU2, and APBC2. Unlike those defined previously, these will (initially) support only resets. They do not incorporate power domain functionality. Previously the clock properties were required for all compatible nodes. Make that requirement only apply to the three existing CCUs (APBC, APMU, and MPMU), so that the new reset-only CCUs can go without specifying them. Define the index values for resets associated with all SpacemiT K1 syscon nodes, including those with clocks already defined, as well as the new ones (without clocks). Signed-off-by: Alex Elder <elder@riscstar.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Yixun Lan <dlan@gentoo.org> Link: https://lore.kernel.org/r/20250702113709.291748-2-elder@riscstar.com Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-07-02dt-bindings: soc: renesas: Document R-Car V4M-7 Gray Hawk SingleGeert Uytterhoeven
Document the compatible values for the Renesas R-Car V4M-7 (R8A779H2) SoC, as used on the Renesas Gray Hawk Single board. R-Car V4M-7 is an updated version of R-Car V4M (R8A779H0). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/b4283a68aa01c82d4435ee8334093dcbdf5bd4d2.1750931027.git.geert+renesas@glider.be
2025-06-26Merge tag 'devicetree-fixes-for-6.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Convert altr,uart-1.0 and altr,juart-1.0 to DT schema. These were applied for nios2, but never sent upstream. - Fix extra '/' in fsl,ls1028a-reset '$id' path - Fix warnings in ti,sn65dsi83 schema due to unnecessary $ref. * tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: serial: Convert altr,uart-1.0 to DT schema dt-bindings: serial: Convert altr,juart-1.0 to DT schema dt-bindings: soc: fsl,ls1028a-reset: Drop extra "/" in $id dt-bindings: drm/bridge: ti-sn65dsi83: drop $ref to fix lvds-vod* warnings
2025-06-24dt-bindings: soc: renesas: Document RZ/T2H Evaluation Board part numberGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/0703ecbc355164e35b90a9fe088438c821f13cd3.1749741263.git.geert+renesas@glider.be
2025-06-19Merge tag 'renesas-r9a09g087-dt-binding-defs-tag1' into renesas-clk-for-v6.17Geert Uytterhoeven
Renesas RZ/N2H DT Binding Definitions DT bindings and binding definitions for the Renesas RZ/N2H (R9A09G087) SoC, shared by driver and DT source files.
2025-06-19dt-bindings: soc: renesas: Document RZ/N2H (R9A09G087) SoCPaul Barker
Add RZ/N2H (R9A09G087), its variants, and the rzn2h-evk evaluation board in documentation. Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250609203656.333138-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-06-17dt-bindings: soc: qcom: aoss-qmp: Add the SM7150 compatibleDavid Wronek
Document the AOSS QMP compatible for SM7150. Signed-off-by: David Wronek <david@mainlining.org> Signed-off-by: Danila Tikhonov <danila@jiaxyga.com> Link: https://lore.kernel.org/r/20250422-sm7150-upstream-v1-6-bf9a9081631d@jiaxyga.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-06-17dt-bindings: soc: qcom,dcc: Add the SM7150 compatibleDanila Tikhonov
Document DDC compatible for SM7150. Signed-off-by: Danila Tikhonov <danila@jiaxyga.com> Link: https://lore.kernel.org/r/20250422-sm7150-upstream-v1-12-bf9a9081631d@jiaxyga.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-06-10dt-bindings: soc: samsung: exynos-pmu: Constrain google,pmu-intr-gen-sysconKrzysztof Kozlowski
PMU interrupt generation block is not present in older Samsung Exynos SoCs, so restrict the property to Google GS101 only. Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250525190630.41858-2-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2025-06-10dt-bindings: soc: renesas: Document RZ/V2H EVK board part numberGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Link: https://lore.kernel.org/0a264c102c615e0a1bec2e45cba180298643520c.1747222771.git.geert+renesas@glider.be
2025-06-09dt-bindings: soc: Add fsl,imx23-digctl.yaml for i.MX23 and i.MX28Frank Li
Add fsl,imx23-digctl.yaml for i.MX23 and i.MX28 to fix below CHECK_DTB warning: arch/arm/boot/dts/nxp/mxs/imx23-sansa.dtb: /apb@80000000/apbh-bus@80000000/digctl@8001c000: failed to match any schema with compatible: ['fsl,imx23-digctl'] Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250528183549.694434-1-Frank.Li@nxp.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-06-09dt-bindings: soc: fsl,ls1028a-reset: Drop extra "/" in $idRob Herring (Arm)
The $id value has a double "//". Drop it. Fixes: 9ca5a7d9d2e0 ("dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node") Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250507215903.2748698-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-06-05Merge tag 'phy-for-6.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "As usual featuring couple of new driver and bunch of new device support and some driver changes to Freescale, rockchip driver along with couple of yaml binding conversions. New Support: - Qualcomm IPQ5424 qusb2 support, IPQ5018 uniphy-pcie driver - Rockchip usb2 support for RK3562, RK3036 usb2 phy support - Samsung exynos2200 eusb2 phy support and driver refactoring for this support, exynos7870 USBDRD support - Mediatek MT7988 xs-phy support - Broadcom BCM74110 usb phy support - Renesas RZ/V2H(P) usb2 phy support Updates: - Freescale phy rate claculation updates, i.MX95 tuning support - Better error handling for amlogic pcie phy - Rockchip color depth configuration and management support - Yaml binding conversion for RK3399 Type-C and PCIe Phy" * tag 'phy-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits) phy: tegra: p2u: Broaden architecture dependency phy: rockchip: inno-usb2: Add usb2 phy support for rk3562 dt-bindings: phy: rockchip,inno-usb2phy: add rk3562 phy: rockchip: inno-usb2: add phy definition for rk3036 dt-bindings: phy: rockchip,inno-usb2phy: add rk3036 compatible phy: freescale: fsl-samsung-hdmi: Improve LUT search for best clock phy: freescale: fsl-samsung-hdmi: Refactor finding PHY settings phy: freescale: fsl-samsung-hdmi: Rename phy_clk_round_rate phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/V2H(P) phy: renesas: phy-rcar-gen3-usb2: Sort compatible entries by SoC part number dt-bindings: phy: renesas,usb2-phy: Document RZ/V2H(P) SoC dt-bindings: phy: renesas,usb2-phy: Add clock constraint for RZ/G2L family phy: exynos5-usbdrd: support Exynos USBDRD 3.2 4nm controller phy: phy-snps-eusb2: add support for exynos2200 phy: phy-snps-eusb2: refactor reference clock init phy: phy-snps-eusb2: make reset control optional phy: phy-snps-eusb2: make repeater optional phy: phy-snps-eusb2: split phy init code phy: phy-snps-eusb2: refactor constructs names phy: move phy-qcom-snps-eusb2 out of its vendor sub-directory ...
2025-05-31Merge tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull SoC devicetree updates from Arnd Bergmann: "There are 11 newly supported SoCs, but these are all either new variants of existing designs, or straight reuses of the existing chip in a new package: - RK3562 is a new chip based on the old Cortex-A53 core, apparently a low-cost version of the Cortex-A55 based RK3568/RK3566. - NXP i.MX94 is a minor variation of i.MX93/i.MX95 with a different set of on-chip peripherals. - Renesas RZ/V2N (R9A09G056) is a new member of the larger RZ/V2 family - Amlogic S6/S7/S7D - Samsung Exynos7870 is an older chip similar to Exynos7885 - WonderMedia wm8950 is a minor variation on the wm8850 chip - Amlogic s805y is almost idential to s805x - Allwinner A523 is similar to A527 and T527 - Qualcomm MSM8926 is a variant of MSM8226 - Qualcomm Snapdragon X1P42100 is related to R1E80100 There are also 65 boards, including reference designs for the chips above, this includes - 12 new boards based on TI K3 series chips, most of them from Toradex - 10 devices using Rockchips RK35xx and PX30 chips - 2 phones and 2 laptops based on Qualcomm Snapdragon designs - 10 NXP i.MX8/i.MX9 boards, mostly for embedded/industrial uses - 3 Samsung Galaxy phones based on Exynos7870 - 5 Allwinner based boards using a variety of ARMv8 chips - 9 32-bit machines, each based on a different SoC family Aside from the new hardware, there is the usual set of cleanups and newly added hardware support on existing machines, for a total of 965 devicetree changesets" * tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (956 commits) MAINTAINERS, mailmap: update Sven Peter's email address arm64: dts: renesas: rzg3e-smarc-som: Reduce I2C2 clock frequency arm64: dts: nuvoton: Add pinctrl ARM: dts: samsung: sp5v210-aries: Align wifi node name with bindings arm64: dts: blaize-blzp1600: Enable GPIO support dt-bindings: clock: socfpga: convert to yaml arm64: dts: rockchip: move rk3562 pinctrl node outside the soc node arm64: dts: rockchip: fix rk3562 pcie unit addresses arm64: dts: rockchip: move rk3528 pinctrl node outside the soc node arm64: dts: rockchip: remove a double-empty line from rk3576 core dtsi arm64: dts: rockchip: move rk3576 pinctrl node outside the soc node arm64: dts: rockchip: fix rk3576 pcie unit addresses arm64: dts: rockchip: Drop assigned-clock* from cpu nodes on rk3588 arm64: dts: rockchip: Add missing SFC power-domains to rk3576 Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0" arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes arm64: dts: mt6359: Rename RTC node to match binding expectations arm64: dts: mt8365-evk: Add goodix touchscreen support arm64: dts: mediatek: mt8188: Add missing #reset-cells property arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board ...
2025-05-31Merge tag 'soc-drivers-6.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "Updates are across the usual driver subsystems with SoC specific drivers: - added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm sm8750, and amlogic c3 and s4 chips. - cache controller updates for sifive chips, plus binding changes for other cache descriptions. - memory controller drivers for mediatek mt6893, stm32 and cleanups for a few more drivers - reset controller drivers for T-Head TH1502, Sophgo sg2044 and Renesas RZ/V2H(P) - SCMI firmware updates to better deal with buggy firmware, plus better support for Qualcomm X1E and NXP i.MX specific interfaces - a new platform driver for the crypto firmware on Cznic Turris Omnia/MOX - cleanups for the TEE firmware subsystem and amdtee driver - minor updates and fixes for freescale/nxp, qualcomm, google, aspeed, wondermedia, ti, nxp, renesas, hisilicon, mediatek, broadcom and samsung SoCs" * tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (133 commits) soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop() soc: aspeed: lpc: Fix impossible judgment condition ARM: aspeed: Don't select SRAM docs: firmware: qcom_scm: Fix kernel-doc warning soc: fsl: qe: Consolidate chained IRQ handler install/remove firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018 dt-bindings: cache: add QiLai compatible to ax45mp memory: stm32_omm: Fix error handling in stm32_omm_disable_child() dt-bindings: cache: Convert marvell,tauros2-cache to DT schema dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema soc: samsung: exynos-pmu: enable CPU hotplug support for gs101 MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation bus: fsl-mc: Use strscpy() instead of strscpy_pad() soc: fsl: qbman: Remove const from portal->cgrs allocation type bus: fsl_mc: Fix driver_managed_dma check bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value bus: fsl-mc: drop useless cleanup ...
2025-05-30Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This has been a semi-quiet cycle. The core framework remains unchanged this time around. In terms of shiny new code though, we have support for the SpacemiT K1 SoC, Sophgo SG2044, and T-HEAD TH1520 VO clk drivers joining the usual silicon players like Qualcomm, Samsung, Allwinner, and Renesas. Surprisingly, the Qualcomm pile was smaller than usual but that is likely because they put one SoC support inside a driver for a different SoC that is very similar. Other than all those new clk drivers there are the usual clk data updates to fix parents, frequency tables, and add missing clks along with some Kconfig changes to make compile testing simpler and even more DT binding conversions to boot. The exciting part is still the new SoC support like SpacemiT and Sophgo support though, which really dominate the diffstat because they introduce a whole new silicon vendor clk driver. New Drivers: - Camera clock controller driver for Qualcomm QCS8300 - DE (display engine) 3.3 clocks on Allwinner H616 - Samsung ExynosAutov920 CPU cluster CL0, CL1 and CL2 clock controllers - Video Output (VO) subsystem clk controller in the T-HEAD TH1520 SoC - Clock driver for Sophgo SG2044 - Clock driver for SpacemiT K1 SoC - Renesas RZ/V2N (R9A09G056) SoC clk driver Updates: - Correct data in various SoC clk drivers - Allow clkaN to be optional in the Qualcomm RPMh clock controller driver if command db doesn't define it - Change Kconfig options to not enable by default during compile testing - Add missing clks in various SoC clk drivers - Remove some duplicate clk DT bindings and convert some more to YAML" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits) clk: qcom: gcc-x1e80100: Set FORCE MEM CORE for UFS clocks clk: qcom: gcc: Set FORCE_MEM_CORE_ON for gcc_ufs_axi_clk for 8650/8750 clk: qcom: rpmh: make clkaN optional clk: qcom: Add support for Camera Clock Controller on QCS8300 clk: rockchip: rk3528: add slab.h header include clk: rockchip: rk3576: add missing slab.h include clk: meson: Do not enable by default during compile testing clk: meson-g12a: add missing fclk_div2 to spicc clk: qcom: gcc-msm8939: Fix mclk0 & mclk1 for 24 MHz clk: rockchip: rename gate-grf clk file clk: rockchip: rename branch_muxgrf to branch_grf_mux clk: sunxi-ng: ccu: add Display Engine 3.3 (DE33) support dt-bindings: allwinner: add H616 DE33 clock binding clk: samsung: correct clock summary for hsi1 block dt-bindings: clock: add SM6350 QCOM video clock bindings clk: rockchip: Pass NULL as reg pointer when registering GRF MMC clocks clk: sunxi-ng: h616: Add LVDS reset for LCD TCON dt-bindings: clock: sun50i-h616-ccu: Add LVDS reset clk: rockchip: rk3036: mark ddrphy as critical clk: rockchip: rk3036: fix implementation of usb480m clock mux ...
2025-05-29Merge tag 'devicetree-for-6.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DT Bindings: - Convert all remaining interrupt-controller bindings to DT schema - Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC PMC, imx-drm, and ftm-quaddec to DT schema - Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te, maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard - Add top-level constraints for renesas,vsp1 and renesas,fcp - Add missing constraint in amlogic,pinctrl-a4 'group' nodes - Adjust the allowed properties for dwc3-xilinx, sony,imx219, pci-iommu, and renesas,dsi - Add EcoNet vendor prefix - Fix the reserved-memory.yaml in fsl,qman-fqd - Drop obsolete numa.txt and cpu-topology.txt which are schemas in dtschema now - Drop Renesas RZ/N1S bindings - Ensure Arm cpu nodes don't allow undocumented properties. Add all the properties which are in use and undocumented. Drop the Mediatek cpufreq binding which is not a binding, but just what DT properties the driver uses. - Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU - Update documentation on defining child nodes with separate schemas - Add bindings to PSCI MAINTAINERS entry DT core: - Add new functions to simplify driver handling of 'memory-region' properties. Users to be added next cycle. - Simplify of_dma_set_restricted_buffer() to use of_for_each_phandle() - Add missing unlock on error in unittest_data_add()" * tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits) dt-bindings: timer: Add fsl,vf610-pit.yaml dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card dt-bindings: arm/cpus: Allow 2 power-domains entries dt-bindings: usb: dwc3-xilinx: allow dma-coherent media: dt-bindings: sony,imx219: Allow props from video-interface-devices dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller dt-bindings: trivial-devices: Add VZ89TE to trivial media: dt-bindings: renesas,vsp1: add top-level constraints media: dt-bindings: renesas,fcp: add top-level constraints dt-bindings: trivial-devices: Add Maxim max30208 dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema ...
2025-05-29Merge branches 'clk-socfpga', 'clk-sophgo', 'clk-thead' and 'clk-samsung' ↵Stephen Boyd
into clk-next * clk-socfpga: clk: socfpga: stratix10: Optimize local variables clk: socfpga: clk-pll: Optimize local variables * clk-sophgo: clk: sophgo: Add clock controller support for SG2044 SoC clk: sophgo: Add PLL clock controller support for SG2044 SoC dt-bindings: clock: sophgo: add clock controller for SG2044 dt-bindings: soc: sophgo: Add SG2044 top syscon device clk: sophgo: Add support for newly added precise compatible dt-bindings: clock: sophgo: Use precise compatible for CV1800 series SoC * clk-thead: clk: thead: Add clock support for VO subsystem in T-HEAD TH1520 SoC dt-bindings: clock: thead: Add TH1520 VO clock controller * clk-samsung: clk: samsung: correct clock summary for hsi1 block clk: samsung: exynosautov920: Fix incorrect CLKS_NR_CPUCL0 definition clk: samsung: exynosautov920: add cpucl1/2 clock support dt-bindings: clock: exynosautov920: add cpucl1/2 clock definitions clk: samsung: exynosautov920: add cpucl0 clock support dt-bindings: clock: exynosautov920: add cpucl0 clock definitions clk: samsung: Use samsung CCF common function
2025-05-29Merge branches 'clk-bindings', 'clk-renesas', 'clk-spacemit' and ↵Stephen Boyd
'clk-cleanup' into clk-next * clk-bindings: dt-bindings: clock: Drop st,stm32h7-rcc.txt dt-bindings: clock: convert bcm2835-aux-clock to yaml dt-bindings: clock: Drop maxim,max77686.txt dt-bindings: clock: convert vf610-clock.txt to yaml format * clk-renesas: (26 commits) clk: renesas: r9a09g047: Add XSPI clock/reset clk: renesas: r9a09g047: Add support for xspi mux and divider dt-bindings: clock: renesas,r9a09g047-cpg: Add XSPI and GBETH PTP core clocks clk: renesas: Use str_on_off() helper clk: renesas: r9a09g057: Add clock and reset entries for USB2 dt-bindings: clock: renesas,r9a09g057-cpg: Add USB2 PHY and GBETH PTP core clocks clk: renesas: rzv2h: Use both CLK_ON and CLK_MON bits for clock state validation clk: renesas: rzv2h: Use str_on_off() helper in rzv2h_mod_clock_endisable() clk: renesas: rzv2h: Support static dividers without RMW clk: renesas: rzv2h: Add macro for defining static dividers clk: renesas: rzv2h: Add support for static mux clocks clk: renesas: r9a09g047: Add clock and reset entries for GE3D clk: renesas: rzv2h: Fix a typo clk: renesas: rzv2h: Add support for RZ/V2N SoC clk: renesas: rzv2h: Sort compatible list based on SoC part number dt-bindings: pinctrl: renesas: Document RZ/V2N SoC dt-bindings: clock: renesas: Document RZ/V2N SoC CPG dt-bindings: soc: renesas: Document SYS for RZ/V2N SoC dt-bindings: soc: renesas: Document Renesas RZ/V2N SoC variants and EVK clk: renesas: rzv2h: Simplify rzv2h_cpg_assert()/rzv2h_cpg_deassert() ... * clk-spacemit: clk: spacemit: k1: Add TWSI8 bus and function clocks clk: spacemit: Add clock support for SpacemiT K1 SoC dt-bindings: clock: spacemit: Add spacemit,k1-pll dt-bindings: soc: spacemit: Add spacemit,k1-syscon * clk-cleanup: clk: test: Forward-declare struct of_phandle_args in kunit/clk.h clk: davinci: Use of_get_available_child_by_name() clk: bcm: rpi: Add NULL check in raspberrypi_clk_register() clk: bcm: rpi: Drop module alias clk: bcm: kona: Remove unused scaled_div_build
2025-05-22Merge tag 'v6.16-rockchip-dts64-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New SoC the RK3562 (4xA53, Mali-G52) with one evaluation board. New boards: - Cobra and PP1516 from Theobroma-Systems (build around the PX30) - Radxa Rock 5B+ (rk3588) - Rockchip RK3399 industrial eval board New peripherals: - GMAC + SDMMC/SDIO on rk3528 - SAI + HDMI-audio on rk3576 Interesting general updates: - move rk3528 i2c + uart aliases as requested - rk3568 PCIe3 MSI to use GIC ITS - update deprecated dwmac reset properties on some px30 boards - updates for cypress usb hubs on some Theobroma boards Binding taken with Greg's blessing https://lore.kernel.org/all/2025051550-polish-prude-ed56@gregkh/ * tag 'v6.16-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (35 commits) arm64: dts: rockchip: Improve LED config for NanoPi R5S arm64: dts: rockchip: add px30-pp1516 base dtsi and board variants dt-bindings: arm: rockchip: add PX30-PP1516 boards from Theobroma Systems arm64: dts: rockchip: add px30-cobra base dtsi and board variants dt-bindings: arm: rockchip: add PX30-Cobra boards from Theobroma Systems arm64: dts: rockchip: move reset to dedicated eth-phy node on ringneck arm64: dts: rockchip: add basic mdio node to px30 arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma with Haikou arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma arm64: dts: rockchip: fix internal USB hub instability on RK3399 Puma dt-bindings: usb: cypress,hx3: Add support for all variants arm64: dts: rockchip: move rk3528 i2c+uart aliases to board files arm64: dts: rockchip: drop wrong spdif clock from edp1 on rk3588 arm64: dts: rockchip: Add RK3562 evb2 devicetree arm64: dts: rockchip: add core dtsi for RK3562 SoC dt-bindings: arm: rockchip: Add rk3562 evb2 board dt-bindings: soc: rockchip: Add rk3562 syscon compatibles dt-bindings: rockchip: pmu: Add rk3562 compatible arm64: dts: rockchip: Enable Ethernet controller on Radxa E20C arm64: dts: rockchip: Add GMAC nodes for RK3528 ... Link: https://lore.kernel.org/r/3998939.iIbC2pHGDl@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'spacemit-dt-for-6.16-1' of https://github.com/spacemit-com/linux ↵Arnd Bergmann
into soc/dt RISC-V SpacemiT DT changes for 6.16 - Add clock driver, fix for pinctrl/uart - Add gpio support, enable LED heartbeat * tag 'spacemit-dt-for-6.16-1' of https://github.com/spacemit-com/linux: riscv: dts: spacemit: add gpio LED for system heartbeat riscv: dts: spacemit: add gpio support for K1 SoC riscv: dts: spacemit: Acquire clocks for UART riscv: dts: spacemit: Acquire clocks for pinctrl riscv: dts: spacemit: Add clock tree for SpacemiT K1 dt-bindings: clock: spacemit: Add spacemit,k1-pll dt-bindings: soc: spacemit: Add spacemit,k1-syscon Link: https://lore.kernel.org/r/20250514044841-GYA524674@gentoo Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'samsung-drivers-6.16-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers Samsung SoC drivers for v6.16, part two Add CPU hotplug support on Google GS101 by toggling respective bits in secondary PMU intr block (Power Management Unit (PMU) Interrupt Generation) from the main PMU driver. * tag 'samsung-drivers-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: exynos-pmu: enable CPU hotplug support for gs101 MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation Link: https://lore.kernel.org/r/20250516082037.7248-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'riscv-sophgo-soc-for-v6.16' of https://github.com/sophgo/linux ↵Arnd Bergmann
into soc/drivers RISC-V SoC for v6.16 Sophgo: Add support for SG2044 TOP syscon device. The SG2044 TOP device provide PLL clock function in its area. Add RTC support for CV1800 series SoC. The device is called RTC, but contains control registers of other HW blocks in its address space, most notably of Power-on-Reset (PoR) module, DW8051 IP (MCU core), accompanying SRAM, hence putting it in SoC subsystem. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * tag 'riscv-sophgo-soc-for-v6.16' of https://github.com/sophgo/linux: soc: sophgo: cv1800: rtcsys: New driver (handling RTC only) dt-bindings: soc: sophgo: add RTC support for Sophgo CV1800 series soc: sophgo: sg2044: Add support for SG2044 TOP syscon device Link: https://lore.kernel.org/r/MA0P287MB2262B041A26A0F5EAD1E296CFE91A@MA0P287MB2262.INDP287.PROD.OUTLOOK.COM Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'qcom-drivers-for-6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers Qualcomm driver updates for v6.16 Allow list QSEECOM for EFI variable services on on the Asus Zenbook A14, and block list TZMEM on the SM7150 platform to avoid issues with rmtfs. Extend the last-level cache (llcc) driver to support version 6 of the hardware and enable SM8750 support. Also add socinfo for the SM8750 platform. Re-enable UCSI support on SC8280XP, now that the reported crash has been dealt with, and filter the altmode notifications to avoid spurious hotplug events being propagated to user space. Add SM7150 support to pd-mapper. * tag 'qcom-drivers-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: llcc-qcom: Add support for SM8750 soc: qcom: llcc-qcom: Add support for LLCC V6 dt-bindings: cache: qcom,llcc: Document SM8750 LLCC block soc: qcom: socinfo: add SM8750 SoC ID dt-bindings: arm: qcom,ids: add SoC ID for SM8750 dt-bindings: soc: qcom: qcom,rpm: add missing clock/-names properties dt-bindings: soc: qcom,rpm: add missing clock-controller node soc: qcom: smem: Update max processor count firmware: qcom: tzmem: disable sm7150 platform soc: qcom: pd-mapper: Add support for SM7150 soc: qcom: pmic_glink_altmode: fix spurious DP hotplug events soc: qcom: smp2p: Fix fallback to qcom,ipc parse soc: qcom: pmic_glink: enable UCSI on sc8280xp firmware: qcom: scm: Allow QSEECOM on Asus Zenbook A14 dt-bindings: soc: qcom,rpmh-rsc: Limit power-domains requirement Link: https://lore.kernel.org/r/20250513215656.44448-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'amlogic-driver-for-v6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers Amlogic Driver for v6.16: - Amlogic clk measure memory usage optimization - Amlogic clk measure support for S4 & C3 Socs - Amlogic A4/A5 reset controller bindings * tag 'amlogic-driver-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: dt-bindings: reset: Add compatible for Amlogic A4/A5 Reset Controller soc: amlogic: clk-measure: Add support for S4 soc: amlogic: clk-measure: Add support for C3 dt-bindings: soc: amlogic: S4 supports clk-measure dt-bindings: soc: amlogic: C3 supports clk-measure soc: amlogic: clk-measure: Define MSR_CLK's register offset separately soc: amlogic: clk-measure: Optimize the memory size of clk-measure Link: https://lore.kernel.org/r/04908842-4c55-44a0-b74c-3aca82a1f204@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'ti-k3-dt-for-v6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.16 Generic Fixups/Cleanups: * am62*: emmc - drop disable-wp, Add bootphase tags to support MMC boot SoC Specific features and Fixes: AM62Ax: * C7x and R5F support added * Bug fix for emmc clock to point to default * CPUFreq thermal throttling on thermal alert AM62P5: * Add RNG Node (common to J722s) * Bug fix for emmc clock to point to default (common to J722S) AM625: * Wakeup R5 node * Bug fix for emmc clock to point to default * PRUSS-M support * New GPU bindings AM64: * Switch to 64-bit address space for PCIe0 * Add PCIe control nodes for main_conf region * Reserve timer nodes used by MCU F/w. AM65: * MMC: Add missing delay timing values for SDR and legacy modes * Add compatible for AM65x syscon and PCIe control properties (dtbs_check fixes) J7200: * PCIe control node to scm_conf, switch to 64-bit address space for PCIe1. J721E: * PCIe control node to scm_conf, switch to 64-bit address space for PCIe0,1. J721S2: * GPU node for Imagination Tech Rouge BXS GPU. * PCIe control node to scm_conf, switch to 64-bit address space for PCIe1. J722s/AM67A: * Switch serdes status to be enabled by board file than at SoC level. * Switch to 64-bit address space for PCIe0. J784S4/J742S2/AM69: * Add ASPCIE0 and enable output for PCIe1 * Fix length of serdes_ln_ctrl. * Switch to 64-bit address space for PCIe0,1. Board Specific: AM62Ax: * SK: co-processors C7x, R5, PWM support added * phycore-som: co-processors C7x, R5 AM62P5: * Add Toradex Verdin AM62P boards with Dahlia, Ivy, Mallow and Yavia support. * SK: Add remote processor support, PWM AM625: * Add BeagleBoard.org PocketBeagle-2 support * phycore-som: Enable R5F support * Verdin: Add eeprom compatible fallback * SK: Enable PWM, voltage supplies, clock, i2cmux rename for camera overlays (dtbs_check fixes) * BeaglePlay: Add voltage supplies for camera overlays (dtbs_check fixes) * phyboard-lyra: Add cooling maps for fan * emmc bug fixes: add non-removable flag for eMMC. AM65: * EVM: Add missing power supply description ofr Rocktech panel (dtbs_check fixes) J721E: * EVM: Enable OSPI1 * EVM/SK: Dt nodes description for mandatory power suplpies for panel and sensors (dtbs_check fixes) J721S2/AM68: * Add phyBOARD-Izar-AM68x * am68-SK: Fix regulator hierarchy J722s/AM67A: * EVM: Add mux controls for CSI2, power regulator nodes and add overlays for quad IMX219 and TEVI OV5640. * BeagleY-AI: Add bootph for main_gpio1 J784S4/J742S2/AM69: * usxgmii expansion board: Drop un-necessary pinctrl-names * evm: Add overlay for USB0 Type-A option * tag 'ti-k3-dt-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (86 commits) arm64: dts: ti: k3-j722s-evm: Add overlay for TEVI OV5640 arm64: dts: ti: k3-j722s-evm: Add overlay for quad IMX219 arm64: dts: ti: j722s-evm: Add MUX to control CSI2RX arm64: dts: ti: j722s-evm: Add DT nodes for power regulators arm64: dts: ti: k3-am62a-phycore-som: Reserve main_timer2 for C7x DSP arm64: dts: ti: k3-am62a-phycore-som: Reserve main_rti4 for C7x DSP arm64: dts: ti: k3-am62a-phycore-som: Enable Co-processors arm64: dts: ti: k3-am62-phycore-som: Enable Co-processors arm64: dts: ti: k3-am62x-phyboard-lyra-gpio-fan: Update cooling maps arm64: dts: ti: k3-am62a: Enable CPU freq throttling on thermal alert arm64: dts: ti: k3-j721e-common-proc-board: Enable OSPI1 on J721E arm64: dts: ti: k3-j721s2: Add GPU node arm64: dts: ti: k3-am62: New GPU binding details arm64: dts: ti: k3-am62-main: Add PRUSS-M node arm64: dts: ti: k3-am64: Reserve timers used by MCU FW arm64: dts: ti: k3-am62a7-sk: Reserve main_rti4 for C7x DSP arm64: dts: ti: k3-am62a7-sk: Reserve main_timer2 for C7x DSP arm64: dts: ti: k3-am62x-sk-common: Enable IPC with remote processors arm64: dts: ti: k3-am62p5-sk: Enable IPC with remote processors arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors ... Link: https://lore.kernel.org/r/20250512144807.yn64klchtmjjl6ac@protrude Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-14dt-bindings: phy: rockchip: Convert RK3399 PCIe PHY to schemaRob Herring (Arm)
Convert the Rockchip RK3399 PCIe PHY to DT schema format. Move the example to the GRF binding as that has the complete block. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250415011824.2320039-1-robh@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-13dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml referenceRob Herring (Arm)
The reserved-memory.yaml reference needs the full path. No warnings were generated because the example has the wrong compatible string, so fix that too. Fixes: 304a90c4f75d ("dt-bindings: soc: fsl: Convert q(b)man-* to yaml format") Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250507154231.1590634-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-05-13dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandlePeter Griffin
gs101 requires access to the pmu interrupt generation register region which is exposed as a syscon. Update the exynos-pmu bindings documentation to reflect this. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Link: https://lore.kernel.org/r/20250506-contrib-pg-cpu-hotplug-suspend2ram-fixes-v1-v4-2-9f64a2657316@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2025-05-13dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentationPeter Griffin
Add bindings documentation for the Power Management Unit (PMU) interrupt generator. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Link: https://lore.kernel.org/r/20250506-contrib-pg-cpu-hotplug-suspend2ram-fixes-v1-v4-1-9f64a2657316@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 06:43:19 +0000