| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Add bindings for arm,armv7m-nvic, fsl,icoll, fsl,imx23-digctl, Xilinx
INTC, Analog Devices ADT7411, and a bunch of trivial hwmon devices
- Convert fsl,vf610-mscm-ir, fsl,dsu, via,vt8500-timer, nxp,isp1301,
Marvell Armada NETA and BM, apm,xgene1-msi, fsl,mpic-msi,
himax,hx8357d, and sitronix,st7586 bindings to DT schema format
- Fixes for some display bindings
- More indentation clean-ups in examples
- Add more guidelines and clarifications on writing bindings
* tag 'devicetree-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (31 commits)
dt-bindings: Correct indentation and style in DTS example
dt-bindings: display: mediatek,dp: Allow DisplayPort AUX bus
dt-bindings: fsl: convert fsl,vf610-mscm-ir.txt to yaml format
dt-bindings: interrupt-controller: Add fsl,icoll.yaml
dt-bindings: interrupt-controller: Add missing Xilinx INTC binding
dt-bindings: display: sprd,sharkl3-dsi-host: Fix missing clocks constraints
dt-bindings: display: sprd,sharkl3-dpu: Fix missing clocks constraints
dt-bindings: display: imx: convert fsl,dcu.txt to yaml format
dt-bindings: timer: via,vt8500-timer: Convert to YAML
dt-bindings: net: Convert Marvell Armada NETA and BM to DT schema
dt-bindings: trivial-devices: Add undocumented hwmon devices
dt-bindings: interrupt-controller: Convert apm,xgene1-msi to DT schema
dt-bindings: gpu: mali-bifrost: Add Allwinner A523 compatible
docs: dt: writing-schema: Document preferred order of properties
docs: dt: writing-bindings: Document discouraged instance IDs
docs: dt: writing-bindings: Document compatible and filename naming
docs: dt: submitting-patches: Avoid 'YAML' in the subject and add an example
MAINTAINERS: adjust file entry in INTEL STRATIX10 FIRMWARE DRIVERS
docs: dt: writing-bindings: Consistently use single-whitespace
docs: dt: writing-bindings: Express better expectations of "specific"
...
|
|
Convert at86rf230.txt yaml format.
Additional changes:
- Add ref to spi-peripheral-props.yaml.
- Add parent spi node in examples.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250724230129.1480174-1-Frank.Li@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ8463 switch is a 3-port switch based from KSZ8863. Its register
access is significantly different from the other KSZ SPI switches.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-2-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add compatible string for the Altera Agilex5 variant of the Synopsys DWC
XGMAC IP version 2.10.
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250724154052.205706-2-matthew.gerlach@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add description for bcm63xx gpio-ctrl phandle which allows
access to registers that control phy functionality.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250724035300.20497-3-kylehendrydev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- hci_sync: fix double free in 'hci_discovery_filter_clear()'
- hci_event: Mask data status from LE ext adv reports
- hci_devcd_dump: fix out-of-bounds via dev_coredumpv
- ISO: add socket option to report packet seqnum via CMSG
- hci_event: Add support for handling LE BIG Sync Lost event
- ISO: Support SCM_TIMESTAMPING for ISO TS
- hci_core: Add PA_LINK to distinguish BIG sync and PA sync connections
- hci_sock: Reset cookie to zero in hci_sock_free_cookie()
drivers:
- btusb: Add new VID/PID 0489/e14e for MT7925
- btusb: Add a new VID/PID 2c7c/7009 for MT7925
- btusb: Add RTL8852BE device 0x13d3:0x3618
- btusb: Add support for variant of RTL8851BE (USB ID 13d3:3601)
- btusb: Add USB ID 3625:010b for TP-LINK Archer TX10UB Nano
- btusb: QCA: Support downloading custom-made firmwares
- btusb: Add one more ID 0x28de:0x1401 for Qualcomm WCN6855
- nxp: add support for supply and reset
- btnxpuart: Add support for 4M baudrate
- btnxpuart: Correct the Independent Reset handling after FW dump
- btnxpuart: Add uevents for FW dump and FW download complete
- btintel: Define a macro for Intel Reset vendor command
- btintel_pcie: Support Function level reset
- btintel_pcie: Add support for device 0x4d76
- btintel_pcie: Make driver wait for alive interrupt
- btintel_pcie: Fix Alive Context State Handling
- hci_qca: Enable ISO data packet RX
* tag 'for-net-next-2025-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (42 commits)
Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections
Bluetooth: hci_event: Mask data status from LE ext adv reports
Bluetooth: btintel_pcie: Fix Alive Context State Handling
Bluetooth: btintel_pcie: Make driver wait for alive interrupt
Bluetooth: hci_devcd_dump: fix out-of-bounds via dev_coredumpv
Bluetooth: hci_sync: fix double free in 'hci_discovery_filter_clear()'
Bluetooth: btusb: Add one more ID 0x28de:0x1401 for Qualcomm WCN6855
Bluetooth: btusb: Sort WCN6855 device IDs by VID and PID
Bluetooth: btusb: QCA: Support downloading custom-made firmwares
Bluetooth: btnxpuart: Add uevents for FW dump and FW download complete
Bluetooth: btnxpuart: Correct the Independent Reset handling after FW dump
Bluetooth: ISO: Support SCM_TIMESTAMPING for ISO TS
Bluetooth: ISO: add socket option to report packet seqnum via CMSG
Bluetooth: btintel: Define a macro for Intel Reset vendor command
Bluetooth: Fix typos in comments
Bluetooth: RFCOMM: Fix typos in comments
Bluetooth: aosp: Fix typo in comment
Bluetooth: hci_bcm4377: Fix typo in comment
Bluetooth: btrtl: Fix typo in comment
Bluetooth: btmtk: Fix typo in log string
...
====================
Link: https://patch.msgid.link/20250723190233.166823-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for chip power supply and chip reset/powerdown.
Signed-off-by: Catalin Popescu <catalin.popescu@leica-geosystems.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add support for 4000000 as secondary baudrate for NXP chipsets
supporting max baudrate as 4M, and are close to the host processor on
same PCB. This mainly helps with faster FW download.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add device-tree bindings for the RT2800 SOC wifi device found in older
Ralink/Mediatek devices.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250722212856.11343-8-rosenp@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Convert Marvell Armada NETA Ethernet Controller and Buffer Manager
bindings to schema. It is a straight forward conversion.
Link: https://lore.kernel.org/r/20250702222626.2761199-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath into wireless-next
Jeff Johnson says:
==================
ath.git patches for v6.17
Highlights for some specific drivers include:
ath9k:
Add AHB "of" support
ath11k:
Support device-specific firmware override
Fix potentially reordered access to device memory
ath12k:
Add more Wi-Fi 7 functionality
Add more statistics to DebugFS
Support different memory profiles
Support 802.11 encap/decap offload to firmware
Fix potentially reordered access to device memory
And of course there is the usual set of cleanups and bug fixes across
the entire family of "ath" drivers.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
REFCLK can be provided by an external source so this should be exposed
by a DT property. The REFCLK is used for RMII and in some SoCs that use
this driver the RGMII 125MHz clk can also be provided by an external
source.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/d558467c4d5b27fb3135ffdead800b14cd9c6c0a.1752510727.git.Ryan.Wanner@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In Aspeed AST2600 design, the MAC internal delay on MAC register cannot
fully reset the RMII interfaces, it may cause the RMII incompletely.
Therefore, we need to add resets property to do SoC-level reset line to
reset the whole MAC function that includes ftgmac, RGMII and RMII.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250709070809.2560688-2-jacky_chou@aspeedtech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The GMAC IP on SG2042 is a standard Synopsys DesignWare MAC
(version 5.00a) with tx clock.
Add necessary compatible string for this device.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Tested-by: Han Gao <rabenda.cn@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250708064052.507094-2-inochiama@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Mt7988 buildin switch has own mdio bus where ge-phys are connected.
Add related property for this.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250709111147.11843-7-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add own dsa-port binding for SoC with internal switch where only phy-mode
'internal' is valid.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250709111147.11843-6-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Meditak Filogic SoCs (MT798x) have dedicated MMIO-SRAM for dma operations.
MT7981 and MT7986 currently use static offset to ethernet MAC register
which will be changed in separate patch once this way is accepted.
Add "sram" property to map ethernet controller to dedicated mmio-sram node.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250709111147.11843-5-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for MT7988 and RSS/LRO allow the interrupt-names
property.
In this way driver can request the interrupts by name which is much
more readable in the driver code and SoC's dtsi than relying on a
specific order.
Frame-engine-IRQs (fe0..3):
MT7621, MT7628: 1 FE-IRQ
MT7622, MT7623: 3 FE-IRQs (only two used by the driver for now)
MT7981, MT7986: 4 FE-IRQs (only two used by the driver for now)
RSS/LRO IRQs (pdma0..3) additional only on Filogic (MT798x) with
count of 4. So all IRQ-names (8) for Filogic.
Set boundaries for all compatibles same as irq count.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250709111147.11843-4-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Increase the maximum IRQ count to 8 (4 FE + 4 RSS/LRO).
Frame-engine-IRQs (max 4):
MT7621, MT7628: 1 FE-IRQ
MT7622, MT7623: 3 FE-IRQs (only two used by the driver for now)
MT7981, MT7986, MT7988: 4 FE-IRQs (only two used by the driver for now)
Mediatek Filogic SoCs (mt798x) have 4 additional IRQs for RSS and/or
LRO. So MT798x have 8 IRQs in total.
MT7981 does not have a ethernet-node yet.
MT7986 Ethernet node is updated with RSS/LRO IRQs in this series.
MT7988 Ethernet node is added in this series.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250709111147.11843-3-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MT7888 have 3 Macs and so its nodes have names from mac0 - mac2. Update
pattern to fix this.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250709111147.11843-2-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc6).
No conflicts.
Adjacent changes:
Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
0a12c435a1d6 ("dt-bindings: net: sun8i-emac: Add A100 EMAC compatible")
b3603c0466a8 ("dt-bindings: net: sun8i-emac: Rename A523 EMAC0 to GMAC0")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some Broadcom PHYs are capable to operate in simplified MII mode,
without TXER, RXER, CRS and COL signals as defined for the MII.
The MII-Lite mode can be used on most Ethernet controllers with full
MII interface by just leaving the input signals (RXER, CRS, COL)
inactive. The absence of COL signal makes half-duplex link modes
impossible but does not interfere with BroadR-Reach link modes on
Broadcom PHYs, because they are all full-duplex only.
Add new interface type "mii-lite" to phy-connection-type enum.
Signed-off-by: Kamil Horák - 2N <kamilh@axis.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250708090140.61355-3-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The GMAC IP on CV1800 series SoC is a standard Synopsys
DesignWare MAC (version 3.70a).
Add necessary compatible string for this device.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250703021220.124195-1-inochiama@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing 'minItems: 1' to iommus property of the Altera SOCFPGA SoC
implementation of the Synopsys DWMAC.
Fixes: 6d359cf464f4 ("dt-bindings: net: Convert socfpga-dwmac bindings to yaml")
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250707154409.15527-1-matthew.gerlach@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This ethernet controller is using fixed links for DSA switches
in two already existing device trees, so make sure the checker
does not complain like this:
intel-ixp42x-linksys-wrv54g.dtb: ethernet@c8009000 (intel,ixp4xx-ethernet):
'fixed-link' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/net/intel,ixp4xx-ethernet.yaml#
intel-ixp42x-usrobotics-usr8200.dtb: ethernet@c800a000 (intel,ixp4xx-ethernet):
'fixed-link' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/net/intel,ixp4xx-ethernet.yaml#
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507040609.K9KytWBA-lkp@intel.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250704-ixp4xx-ethernet-binding-fix-v1-1-8ac360d5bc9b@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The datasheets refer to the first Ethernet controller as GMAC0, not
EMAC0.
Rename the compatible string to align with the datasheets. A fix for
the device trees will be sent separately.
Fixes: 0454b9057e98 ("dt-bindings: net: sun8i-emac: Add A523 EMAC0 compatible")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250628054438.2864220-2-wens@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc5).
No conflicts.
No adjacent changes.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Examples should be complete and should not have a 'status' property,
especially a disabled one because this disables the dt_binding_check of
the example against the schema. Dropping 'status' property shows
missing other properties - phy-mode and phy-handle.
Fixes: 114508a89ddc ("dt-bindings: net: Add support for Sophgo SG2044 dwmac")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://patch.msgid.link/20250701063621.23808-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert the bindings for socfpga-dwmac to yaml. Since the original
text contained descriptions for two separate nodes, two separate
yaml files were created.
Signed-off-by: Mun Yew Tham <mun.yew.tham@altera.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250630213748.71919-1-matthew.gerlach@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert nxp,lpc1850-dwmac.txt to yaml format.
Additional changes:
- compatible string add fallback as "nxp,lpc1850-dwmac", "snps,dwmac-3.611"
"snps,dwmac".
- add common interrupts, interrupt-names, clocks, clock-names, resets and
reset-names properties.
- add ref snps,dwmac.yaml.
- add phy-mode in example to avoid dt_binding_check warning.
- update examples to align lpc18xx.dtsi.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250630161613.2838039-1-Frank.Li@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After studying the datasheets for some of the KS8995 variants
it becomes pretty obvious that this is a straight-forward
and simple MII DSA switch with one port in (CPU) and four outgoing
ports, and it even supports custom tags by setting a bit in
a special register, and elaborate VLAN handling as all DSA
switches do.
What is a bit odd with KS8995 is that it uses an extra MII-P5
port to access one of the PHYs separately, on the side of the
switch fabric, such as when using a WAN port separately from
a LAN switch in a home router.
Rewrite the terse bindings to YAML, and move to the proper
subdirectory. Include a verbose example to make things clear.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250625-ks8995-dsa-bindings-v2-1-ce71dce9be0b@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Allwinner A100/A133 has an Ethernet MAC (EMAC) controller that is
compatible with the A64 one. It features the same syscon registers for
control of the top-level integration of the unit.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250626080923.632789-4-paulk@sys-base.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add option to reduce the RX antenna gain to be able to reduce the
sensitivity.
Signed-off-by: Paul Geurts <paul.geurts@prodrive-technologies.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250626141242.3749958-2-paul.geurts@prodrive-technologies.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert lpc-eth.txt yaml format.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250624202028.2516257-1-Frank.Li@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Airoha AN7583 SoC have 3 different MDIO Controller. One comes from
the intergated Switch based on MT7530. The other 2 live under the SCU
register and expose 2 dedicated MDIO controller.
Document the schema for the 2 dedicated MDIO controller.
Each MDIO controller can be independently reset with the SoC reset line.
Each MDIO controller have a dedicated clock configured to 2.5MHz by
default to follow MDIO bus IEEE 802.3 standard.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The DT bindings file "renesas,r9a09g057-gbeth.yaml" applies to a whole
family of SoCs, and uses "renesas,rzv2h-gbeth" as a fallback compatible
value. Hence rename it to the more generic "renesas,rzv2h-gbeth.yaml".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/721f6e0e09777e0842ecaca4578bc50c953d2428.1750838954.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce 'firmware-name' property to allow end-users and/or integrators
to decide which usecase-specific firmware to run on the WCN6855. This is
necessary due to resource limitations such as memory capacity and
CPU capability, or performance and power optimization for different
application scenarios.
Two firmwares are supported: 'WCN6855/hw2.0' and 'WCN6855/hw2.0/nfa765'.
The former is the default firmware, suitable for most WiFi 6 STA
functions. The latter adds support for commercial-quality SAP and
optimizes power consumption for IoT applications.
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250522013444.1301330-2-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
These are for the wireless chips that come built in with various
Atheros/QCA SoCs. dts wise, the difference between pcie and the wmac is
AHB > PCIE > WIFI
AHB > WIFI
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20250609030851.17739-4-rosenp@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
k3-am65-cpsw-nuss controllers have a fixed internal TX delay, so RXID
mode is not actually possible and will result in a warning from the
driver going forward.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/f9b5e84fcaf565506ed86cf1838444c2bc47334f.1750756583.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch set adds all the supported FLEXCOMs for the SAMA7D65 SoC.
This also adds the GMAC interfaces and enables GMAC0 interface for
the SAMA7D65 SoC.
With the FLEXCOMs added to the SoC the MCP16502 and the MAC address
EEPROM are both added to flexcom10.
The dt-binding for USART is here [1]. And the dt-binding for DMA has
been applied here [2].
The original thread for this is here [3]. The applied changes have been
removed for this resend
[1] https://lore.kernel.org/20250306160318.vhPzJLjl19Vq9am9RRbuv5ddmQ6GCEND-YNvPKKtAtU@z
[2] https://lore.kernel.org/174065806827.367410.5368210992879330466.b4-ty@kernel.org
[3] https://lore.kernel.org/392b078b38d15f6adf88771113043044f31e8cd6.1743523114.git.Ryan.Wanner@microchip.com
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/35808b7cee5ba5b2ce55d741ae1ada0f1cd2f7cb.1750694691.git.Ryan.Wanner@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Improve the channels property description to better explain the
relationship between physical delivery channels and PSE PI pairsets.
The previous description was unclear about how channels are referenced
and used in the port matrix mapping.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250620-poe_doc_improve-v1-1-96357bb95d52@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert qca,qca7000.txt yaml format.
Additional changes:
- add refs: spi-peripheral-props.yaml, serial-peripheral-props.yaml and
ethernet-controller.yaml.
- simple spi and uart node name.
- use low case for mac address in examples.
- add check reg choose spi-peripheral-props.yaml or
spi-peripheral-props.yaml.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250618184417.2169745-1-Frank.Li@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Document the IPQ5018 Internal Gigabit Ethernet PHY found in the IPQ5018
SoC. Its output pins provide an MDI interface to either an external
switch in a PHY to PHY link scenario or is directly attached to an RJ45
connector.
The PHY supports 10/100/1000 mbps link modes, CDT, auto-negotiation and
802.3az EEE.
For operation, the LDO controller found in the IPQ5018 SoC for which
there is provision in the mdio-4019 driver.
Two common archictures across IPQ5018 boards are:
1. IPQ5018 PHY --> MDI --> RJ45 connector
2. IPQ5018 PHY --> MDI --> External PHY
In a phy to phy architecture, the DAC needs to be configured to
accommodate for the short cable length. As such, add an optional boolean
property so the driver sets preset DAC register values accordingly.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250613-ipq5018-ge-phy-v5-1-9af06e34ea6b@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an interrupt property to the device tree bindings for the TI TPS23881
PSE controller. The interrupt is primarily used to detect classification
and disconnection events, which are essential for managing the PSE
controller in compliance with the PoE standard.
Interrupt support is essential for the proper functioning of the TPS23881
controller. Without it, after a power-on (PWON), the controller will
no longer perform detection and classification. This could lead to
potential hazards, such as connecting a non-PoE device after a PoE device,
which might result in magic smoke.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-13-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adds the regulator supply parameter of the managers.
Update also the example as the regulator supply of the PSE PIs
should be the managers itself and not an external regulator.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-11-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Document support for the GBETH IP found on the Renesas RZ/G3E (R9A09G047) SoC.
The GBETH block on RZ/G3E is equivalent in functionality to the GBETH found on
RZ/V2H(P) (R9A09G057).
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250611061204.15393-1-john.madieu.xa@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.16-rc1.
Included in here are the following:
- USB offload support for audio devices.
I think this takes the record for the most number of patch series
(30+) over the longest period of time (2+ years) to get merged
properly.
Many props go to Wesley Cheng for seeing this effort through, they
took a major out-of-tree hacked-up-monstrosity that was created by
multiple vendors for their specific devices, got it all merged into
a semi-coherent set of changes, and got all of the different major
subsystems to agree on how this should be implemented both with
changes to their code as well as userspace apis, AND wrangled the
hardware companies into agreeing to go forward with this, despite
making them all redo work they had already done in their private
device trees.
This feature offers major power savings on embedded devices where a
USB audio stream can continue to flow while the rest of the system
is sleeping, something that devices running on battery power really
care about. There are still some more small tweaks left to be done
here, and those patches are still out for review and arguing among
the different hardware companies, but this is a major step forward
and a great example of how to do upstream development well.
- small number of thunderbolt fixes and updates, things seem to be
slowing down here (famous last words...)
- xhci refactors and reworking to try to handle some rough corner
cases in some hardware implementations where things don't always
work properly
- typec driver updates
- USB3 power management reworking and updates
- Removal of some old and orphaned UDC gadget drivers that had not
been used in a very long time, dropping over 11 thousand lines from
the tree, always a nice thing, making up for the 12k lines added
for the USB offload feature.
- lots of little updates and fixes in different drivers
All of these have been in linux-next for over 2 weeks, the USB offload
logic has been in there for 8 weeks now, with no reported issues"
* tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
ALSA: usb-audio: qcom: fix USB_XHCI dependency
ASoC: qdsp6: fix compile-testing without CONFIG_OF
usb: misc: onboard_usb_dev: fix build warning for CONFIG_USB_ONBOARD_DEV_USB5744=n
usb: typec: tipd: fix typo in TPS_STATUS_HIGH_VOLAGE_WARNING macro
USB: typec: fix const issue in typec_match()
USB: gadget: udc: fix const issue in gadget_match_driver()
USB: gadget: fix up const issue with struct usb_function_instance
USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
USB: serial: bus: fix const issue in usb_serial_device_match()
usb: usbtmc: Fix timeout value in get_stb
usb: usbtmc: Fix read_stb function and get_stb ioctl
ALSA: qc_audio_offload: try to reduce address space confusion
ALSA: qc_audio_offload: avoid leaking xfer_buf allocation
ALSA: qc_audio_offload: rename dma/iova/va/cpu/phys variables
ALSA: usb-audio: qcom: Fix an error handling path in qc_usb_audio_probe()
usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence
dt-bindings: usb: ti,usb8041: Add binding for TI USB8044 hub controller
usb: misc: onboard_usb_dev: Add support for TI TUSB8044 hub
usb: gadget: lpc32xx_udc: Use USB API functions rather than constants
usb: gadget: epautoconf: Use USB API functions rather than constants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert all remaining interrupt-controller bindings to DT schema
- Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC
PMC, imx-drm, and ftm-quaddec to DT schema
- Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te,
maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard
- Add top-level constraints for renesas,vsp1 and renesas,fcp
- Add missing constraint in amlogic,pinctrl-a4 'group' nodes
- Adjust the allowed properties for dwc3-xilinx, sony,imx219,
pci-iommu, and renesas,dsi
- Add EcoNet vendor prefix
- Fix the reserved-memory.yaml in fsl,qman-fqd
- Drop obsolete numa.txt and cpu-topology.txt which are schemas in
dtschema now
- Drop Renesas RZ/N1S bindings
- Ensure Arm cpu nodes don't allow undocumented properties. Add all
the properties which are in use and undocumented. Drop the Mediatek
cpufreq binding which is not a binding, but just what DT properties
the driver uses.
- Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU
- Update documentation on defining child nodes with separate schemas
- Add bindings to PSCI MAINTAINERS entry
DT core:
- Add new functions to simplify driver handling of 'memory-region'
properties. Users to be added next cycle.
- Simplify of_dma_set_restricted_buffer() to use
of_for_each_phandle()
- Add missing unlock on error in unittest_data_add()"
* tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits)
dt-bindings: timer: Add fsl,vf610-pit.yaml
dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC
ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card
dt-bindings: arm/cpus: Allow 2 power-domains entries
dt-bindings: usb: dwc3-xilinx: allow dma-coherent
media: dt-bindings: sony,imx219: Allow props from video-interface-devices
dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block
dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt
dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties
dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml
dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller
dt-bindings: trivial-devices: Add VZ89TE to trivial
media: dt-bindings: renesas,vsp1: add top-level constraints
media: dt-bindings: renesas,fcp: add top-level constraints
dt-bindings: trivial-devices: Add Maxim max30208
dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference
dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema
dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema
dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema
dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema
...
|
|
Add airoha,an7583-switch additional compatible to the mt7530 DSA Switch
Family. This is an exact match of the airoha,en7581-switch (based on
mt7988-switch) with the additional requirement of tweak on the
GEPHY_CONN_CFG registers to make the internal PHY actually work.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250522165313.6411-2-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
