| Age | Commit message (Collapse) | Author |
|---|
|
Emails to alexandru.tachici@analog.com bounce permanently:
Remote Server returned '550 5.1.10 RESOLVER.ADR.RecipientNotFound; Recipient not found by SMTP address lookup'
so replace him with Cedric Encarnacion from Analog.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250724113735.59148-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add the ina228 to ina2xx bindings.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://lore.kernel.org/r/20250718-ina228-v2-2-227feb62f709@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
To make this binding match what is usally used for PWMs, deprecate 4
cells and allow 3 instead.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/77895aec937b6217f513d3b12e7945f1707fd906.1750361514.git.u.kleine-koenig@baylibre.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for adp1051, adp1055, and ltp8800.
ADP1051: 6 PWM for I/O Voltage, I/O Current, Temperature
ADP1055: 6 PWM for I/O Voltage, I/O Current, Power, Temperature
LTP8800-1A/-2/-4A: 150A/135A/200A DC/DC µModule Regulator
Co-developed-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Signed-off-by: Cedric Encarnacion <cedricjustine.encarnacion@analog.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250709-adp1051-v5-1-539254692252@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add several compatibles already in use to the ti,ucd90320 binding.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250701-dt-hwmon-compatibles-v1-5-ad99e65cf11b@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The maxim,max20710 compatible is already in use. Add it to the
maxim,max20730 binding as the device appears to be similar.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250701-dt-hwmon-compatibles-v1-4-ad99e65cf11b@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The lltc,ltc713 compatible is already in use. Add it to the lltc,ltc2978
binding as the device appears to be similar.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250701-dt-hwmon-compatibles-v1-3-ad99e65cf11b@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The adi,adm1024 compatible is already in use. Add it to the lm87
binding as the device appears to be compatible.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250701-dt-hwmon-compatibles-v1-2-ad99e65cf11b@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
nct72, nct214, and nct218
The onsemi nct72, nct214, and nct218 and Dallas/Analog max6654
temperature sensors are already supported, but not documented. Add
them to the LM90 binding.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250701-dt-hwmon-compatibles-v1-1-ad99e65cf11b@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The fan can be used as a cooling device, add a description of the
`cooling-levels` property and restrict the maximum value to 255, which
is the highest PWM duty cycle supported by the AMC6821 fan controller.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250613-b4-amc6821-cooling-device-support-v4-1-a8fc063c55de@toradex.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add device type support for raa229621
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chiang Brian <chiang.brian@inventec.com>
Link: https://lore.kernel.org/r/20250605040134.4012199-2-chiang.brian@inventec.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add device tree bindings for Monolithic Power Systems MPQ8785, MPM82504
and MPM3695 PMBus-compliant voltage regulators.
These bindings also documents the optional
"mps,vout-fb-divider-ratio-permille" property.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250511035701.2607947-2-paweldembicki@gmail.com
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add the sq52206 compatible to the ina2xx.yaml
Signed-off-by: Wenliang Yan <wenliang202407@163.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250506053741.4837-5-wenliang202407@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The MCU device on SG2044 exposes the same interface as SG2042, which is
already supported by the kernel.
Add compatible string for monitor device of SG2044.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250413223507.46480-7-inochiama@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
TMP102 is powered by its V+ supply, document it. The property is called
"vcc-supply" since the plus sign (+) is not a valid property character.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250417180426.3872314-1-peter@korsgaard.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add Analog Devices LT3074 Ultralow Noise, High PSRR Dropout Linear
Regulator.
Signed-off-by: Cedric Encarnacion <cedricjustine.encarnacion@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250421-upstream-lt3074-v3-1-71636322f9fe@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add properties to describe the fan and the PWM controller output.
Link: https://www.ti.com/lit/gpn/amc6821
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250402102146.65406-2-francesco@dolcini.it
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Introduce yaml schema for Microchip emc2305 pwm fan controller.
Signed-off-by: Florin Leotescu <florin.leotescu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250321143308.4008623-2-florin.leotescu@oss.nxp.com
[groeck: Fixed comment line length, added 'maxItems: 1'
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
There should be no blank line between the YAML opening header and the
schema '$id'.
Reported-by: Florin Leotescu (OSS) <florin.leotescu@oss.nxp.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250321080212.18013-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add TI INA233 Current and Power Monitor bindings.
Signed-off-by: Leo Yang <leo.yang.sy0@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250116085939.1235598-2-leo.yang.sy0@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add LTC7170 and LT7171 to supported devices of LTC2978. It has similar
set of registers to LTC3887, differing only in number of channels and
some PMBUS status and functionalities.
Co-developed-by: Cherrence Sarip <cherrence.sarip@analog.com>
Signed-off-by: Cherrence Sarip <cherrence.sarip@analog.com>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250317-hwmon-next-v1-2-da0218c38197@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This adds an optional regulator support (e.g. switchable supply) to the
GPIO fan binding.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250210145934.761280-2-alexander.stein@ew.tq-group.com
[groeck: Changed power supply description as suggested by Krzysztof]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add optional gpio device tree bindings to the UCD90320.
The binding's description is already mentioning the number of GPIOs but
without actual gpio controller description.
Signed-off-by: Jonathan Stroud <jonathan.stroud@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/662a050f3f8160fe7c80d4f19e45eb4fac0f2f0a.1740384385.git.michal.simek@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
the ntc, compatibles
Fix the comment stating that the "ntp," compatible strings are deprecated
which should be "ntc,"
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250227-ntc_thermistor_fixes-v1-2-70fa73200b52@gocontroll.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for the Nuvoton NCT7716/7717/7718 thermal sensors.
NCT7716 and NCT7717 do not support to add temperature offset.
The maximum offset supported by NCT7718 is 127875 millicelsius
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250117100744.1571385-3-a0282524688@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add LTM4673 to supported devices of LTC2978. Unlike other LTM46xx
devices, LTM4673 is a μModule regulator that outputs four channels.
Signed-off-by: Cedric Encarnacion <cedricjustine.encarnacion@analog.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250124-ltm4673-v1-1-a2c6aa37c903@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for the adm1273 Hot-Swap Controller and Digital Power
and Energy Monitor
Signed-off-by: John Erasmus Mari Geronimo <johnerasmusmari.geronimo@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250106131740.305988-2-johnerasmusmari.geronimo@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add this LM75 compatible sensor which needs a separate entry because of
its default sampling time and SMBusAlert handling.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241218074131.4351-6-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add devicetree bindings to support declaring optional voltage dividers to
the rail outputs of supported digital multiphase regulators. Some
applications require Vout to exceed the voltage range that the Vsense pin
can detect. This binding definition allows users to define the
characteristics of a voltage divider placed between Vout and the Vsense
pin for any rail powered by the device.
These bindings copy the vout-voltage-divider property defined in the
maxim,max20730 bindings schema since it is the best fit for the use case
of scaling hwmon PMBus telemetry. The generic voltage-divider property
used by many iio drivers was determined to be a poor fit because that
schema is tied directly to iio for the purpose of scaling io-channel
voltages and the isl68137 driver is not an iio driver.
New schema file named isil,isl68137.yaml to align with the corresponding
driver name and pre-existing bindings ported from trivial bindings.
However, all new device bindings use renesas as the vendor prefix
since Renesas acquired Intersil and now maintains all documentation
for the devices.
Signed-off-by: Grant Peltier <grantpeltier93@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <f7ac200e982961ff733de27a5c4505c04d68b6f3.1731439797.git.grantpeltier93@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Delta AFC0612DB-F00 fan has to be set to at least 30% PWM duty cycle
to spin up from a stopped state, and can be afterward throttled down to
lower PWM duty cycle. Introduce support for operating such fans which
need to start at higher PWM duty cycle first and can slow down next.
Document two new DT properties, "fan-stop-to-start-percent" and
"fan-stop-to-start-usec". The former describes the minimum percent
of fan RPM at which it will surely spin up from stopped state. This
value can be found in the fan datasheet and can be converted to PWM
duty cycle easily. The "fan-stop-to-start-usec" describes the minimum
time in microseconds for which the fan has to be set to stopped state
start RPM for the fan to surely spin up.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Message-ID: <20241106185925.223736-1-marex@denx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The register layout of P3T1085 is the same as ti,tmp108. Add compatible
string nxp,p3t1085 for it. The difference of P3T1085 is support I3C.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Message-ID: <20241111-p3t1085-v3-1-bff511550aad@nxp.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add DT binding for the Texas Instruments TPS25990 eFuse
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Message-ID: <20241105-tps25990-v4-6-0e312ac70b62@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
SY24655 is similar to INA226. Its supply voltage and pin definitions
are therefore the same. Compared to INA226, SY24655 has two additional
registers for configuring and calculating average power.
Signed-off-by: Wenliang Yan <wenliang202407@163.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Message-ID: <20241106150547.2538-2-wenliang202407@163.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add LTC7841 to supported devices of LTC2978. It has similar set of
registers to LTC7880, differing only in number of output channels and
some unimplemented PMBUS status and functionalities.
Signed-off-by: Mariel Tinaco <Mariel.Tinaco@analog.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <20241029013734.293024-2-Mariel.Tinaco@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add bindings for the Nuvoton NCT7363Y Fan Controller
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ban Feng <kcfeng0@nuvoton.com>
Message-ID: <20241022052905.4062682-2-kcfeng0@nuvoton.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Remove vicor,pli1209bc from trivial-devices as it requires additional
properties and does not fit into the trivial devices category.
Add new bindings for Vicor pli1209bc, a Digital Supervisor with
Isolation for use with BCM Bus Converter Modules.
VR rails are defined under regulator node as expected by pmbus driver.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20241021123044.3648960-1-naresh.solanki@9elements.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Remove mps297x from trivial-devices as it requires
additional properties and does not fit into the trivial
devices category.
Add new bindings for MPS mp2971, mp2973 & mp2975.
It is Dual-Loop, Digital Multi-Phase Controller with PMBUS
interface
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Message-ID: <20241022103750.572677-1-naresh.solanki@9elements.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add dt-bindings for Renesas ISL28022 power monitor.
Signed-off-by: Carsten Spieß <mail@carsten-spiess.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yikai Tsai <yikai.tsai.wiwynn@gmail.com>
Message-ID: <20241002081133.13123-2-yikai.tsai.wiwynn@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add dt-bindings for amc6821 intelligent temperature monitor and
pulse-width modulation (PWM) fan controller.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Farouk Bouabid <farouk.bouabid@cherry.de>
Message-ID: <20240906-dev-mule-i2c-mux-v8-3-dbd28a150e41@cherry.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert binding doc ltc2978.txt to yaml format.
Additional change:
- add i2c node.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dtb: /soc/i2c@2000000/i2c-mux@77/i2c@2/regulator@5c:
failed to match any schema with compatible: ['lltc,ltc3882']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <20240829150641.1307906-1-Frank.Li@nxp.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Due to the design, Sophgo SG2042 use an external MCU to provide
hardware information, thermal information and reset control.
Add bindings for this monitor device.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Message-ID: <IA1PR20MB49538276F283C4D01364AEB6BB822@IA1PR20MB4953.namprd20.prod.outlook.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add device tree bindings and an example for max31790 device.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20240822084808.299884-1-chanh@os.amperecomputing.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Now that we have fan child nodes that can specify flags for the PWM
outputs we no longer need the adi,pwm-active-state property.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240722221737.3407958-3-chris.packham@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add fan child nodes that allow describing the connections for the
ADT7475 to the fans it controls. This also allows setting some
initial values for the pwm duty cycle and frequency.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240722221737.3407958-2-chris.packham@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
TMP108 is powered by its V+ supply, document it. The property is called
"vcc-supply" since the plus sign (+) is not an expected character.
While at it, add a short description with a link to its datasheets.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/ZnBmDXfnDQXNXz3k@standask-GA-A55M-S2HP
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add a property to the binding to configure the Alert Polarity.
Alert pin is asserted based on the value of Alert Polarity bit of
Mask/Enable register. It is by default 0 which means Alert pin is
configured to be active low open collector. Value of 1 maps to
Inverted (active high open collector).
Signed-off-by: Amna Waseem <Amna.Waseem@axis.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240603-apol-ina2xx-fix-v3-1-b9eff3158e4e@axis.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for g761 PWM Fan controller. This is an exact copy of g763
with the difference that it does also support an internal clock
oscillator.
With clocks property not defined, the internal clock oscillator is used.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240604164348.542-2-ansuelsmth@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert g762 Documentation to yaml schema and port all the custom
properties and info.
Add the vendor prefix to name to follow naming standard.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240604164348.542-1-ansuelsmth@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add Devicetree binding documentation for Maxim MAX6639 temperature
monitor with PWM fan-speed controller.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240528125122.1129986-1-naresh.solanki@9elements.com
[groeck: Dropped unnecessary '|' after description:]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for the adm1281 Hot-Swap Controller and Digital Power
and Energy Monitor
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jose Ramon San Buenaventura <jose.sanbuenaventura@analog.com>
Link: https://lore.kernel.org/r/20240425070948.25788-2-jose.sanbuenaventura@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
