| Age | Commit message (Collapse) | Author |
|---|
|
When I did memory failure tests, below panic occurs:
page dumped because: VM_BUG_ON_PAGE(PagePoisoned(page))
kernel BUG at include/linux/page-flags.h:616!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 3 PID: 720 Comm: bash Not tainted 6.10.0-rc1-00195-g148743902568 #40
RIP: 0010:unpoison_memory+0x2f3/0x590
RSP: 0018:ffffa57fc8787d60 EFLAGS: 00000246
RAX: 0000000000000037 RBX: 0000000000000009 RCX: ffff9be25fcdc9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff9be25fcdc9c0
RBP: 0000000000300000 R08: ffffffffb4956f88 R09: 0000000000009ffb
R10: 0000000000000284 R11: ffffffffb4926fa0 R12: ffffe6b00c000000
R13: ffff9bdb453dfd00 R14: 0000000000000000 R15: fffffffffffffffe
FS: 00007f08f04e4740(0000) GS:ffff9be25fcc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000564787a30410 CR3: 000000010d4e2000 CR4: 00000000000006f0
Call Trace:
<TASK>
unpoison_memory+0x2f3/0x590
simple_attr_write_xsigned.constprop.0.isra.0+0xb3/0x110
debugfs_attr_write+0x42/0x60
full_proxy_write+0x5b/0x80
vfs_write+0xd5/0x540
ksys_write+0x64/0xe0
do_syscall_64+0xb9/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f08f0314887
RSP: 002b:00007ffece710078 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007f08f0314887
RDX: 0000000000000009 RSI: 0000564787a30410 RDI: 0000000000000001
RBP: 0000564787a30410 R08: 000000000000fefe R09: 000000007fffffff
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000009
R13: 00007f08f041b780 R14: 00007f08f0417600 R15: 00007f08f0416a00
</TASK>
Modules linked in: hwpoison_inject
---[ end trace 0000000000000000 ]---
RIP: 0010:unpoison_memory+0x2f3/0x590
RSP: 0018:ffffa57fc8787d60 EFLAGS: 00000246
RAX: 0000000000000037 RBX: 0000000000000009 RCX: ffff9be25fcdc9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff9be25fcdc9c0
RBP: 0000000000300000 R08: ffffffffb4956f88 R09: 0000000000009ffb
R10: 0000000000000284 R11: ffffffffb4926fa0 R12: ffffe6b00c000000
R13: ffff9bdb453dfd00 R14: 0000000000000000 R15: fffffffffffffffe
FS: 00007f08f04e4740(0000) GS:ffff9be25fcc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000564787a30410 CR3: 000000010d4e2000 CR4: 00000000000006f0
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x31c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception ]---
The root cause is that unpoison_memory() tries to check the PG_HWPoison
flags of an uninitialized page. So VM_BUG_ON_PAGE(PagePoisoned(page)) is
triggered. This can be reproduced by below steps:
1.Offline memory block:
echo offline > /sys/devices/system/memory/memory12/state
2.Get offlined memory pfn:
page-types -b n -rlN
3.Write pfn to unpoison-pfn
echo <pfn> > /sys/kernel/debug/hwpoison/unpoison-pfn
This scenario can be identified by pfn_to_online_page() returning NULL.
And ZONE_DEVICE pages are never expected, so we can simply fail if
pfn_to_online_page() == NULL to fix the bug.
Link: https://lkml.kernel.org/r/20250828024618.1744895-1-linmiaohe@huawei.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 3215eaceca87 ("mm/mremap: refactor initial parameter sanity
checks") moved the sanity check for vrm->new_addr from mremap_to() to
check_mremap_params().
However, this caused a regression as vrm->new_addr is now checked even
when MREMAP_FIXED and MREMAP_DONTUNMAP flags are not specified. In this
case, vrm->new_addr can be garbage and create unexpected failures.
Fix this by moving the new_addr check after the vrm_implies_new_addr()
guard. This ensures that the new_addr is only checked when the user has
specified one explicitly.
Link: https://lkml.kernel.org/r/20250828142657.770502-1-cmllamas@google.com
Fixes: 3215eaceca87 ("mm/mremap: refactor initial parameter sanity checks")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The 'allocation failed, ...' warning messages can cause unlimited log
spam, contrary to the implementation's intent.
The warn_limit variable is accessed without synchronization. If more than
<warn_limit> threads enter the warning path at the same time, the variable
will get decremented past 0. Once it becomes negative, the non-zero check
will always return true leading to unlimited log spam.
Use atomic operation to access warn_limit and change condition to test for
non-negative (>= 0) - atomic_dec_if_positive will return -1 once
warn_limit becomes 0. Continue to print disable message alongside the
last warning.
While the change cited in Fixes is only adjacent, the warning limit
implementation was correct before it. Only non-atomic allocations were
considered for warnings, and those happened to hold pcpu_alloc_mutex while
accessing warn_limit.
[vdumitrescu@nvidia.com: prevent warn_limit from going negative, per Christoph Lameter]
Link: https://lkml.kernel.org/r/ee87cc59-2717-4dbb-8052-1d2692c5aaaa@nvidia.com
Link: https://lkml.kernel.org/r/ab22061a-a62f-4429-945b-744e5cc4ba35@nvidia.com
Fixes: f7d77dfc91f7 ("mm/percpu.c: print error message too if atomic alloc failed")
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Christoph Lameter (Ampere) <cl@gentwo.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Duplicate memory errors can be reported by multiple sources.
Passing an already poisoned page to action_result() causes issues:
* The amount of hardware corrupted memory is incorrectly updated.
* Per NUMA node MF stats are incorrectly updated.
* Redundant "already poisoned" messages are printed.
Avoid those issues by:
* Skipping hardware corrupted memory updates for already poisoned pages.
* Skipping per NUMA node MF stats updates for already poisoned pages.
* Dropping redundant "already poisoned" messages.
Make MF_MSG_ALREADY_POISONED consistent with other action_page_types and
make calls to action_result() consistent for already poisoned normal pages
and huge pages.
Link: https://lkml.kernel.org/r/aLCiHMy12Ck3ouwC@hpe.com
Fixes: b8b9488d50b7 ("mm/memory-failure: improve memory failure action_result messages")
Signed-off-by: Kyle Meyer <kyle.meyer@hpe.com>
Reviewed-by: Jiaqi Yan <jiaqiyan@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jane Chu <jane.chu@oracle.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The kexec_buf structure was previously declared without initialization.
commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly")
added a field that is always read but not consistently populated by all
architectures. This un-initialized field will contain garbage.
This is also triggering a UBSAN warning when the uninitialized data was
accessed:
------------[ cut here ]------------
UBSAN: invalid-load in ./include/linux/kexec.h:210:10
load of value 252 is not a valid value for type '_Bool'
Zero-initializing kexec_buf at declaration ensures all fields are
cleanly set, preventing future instances of uninitialized memory being
used.
Link: https://lkml.kernel.org/r/20250827-kbuf_all-v1-3-1df9882bb01a@debian.org
Fixes: bf454ec31add ("kexec_file: allow to place kexec_buf randomly")
Signed-off-by: Breno Leitao <leitao@debian.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Baoquan He <bhe@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Coiby Xu <coxu@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The kexec_buf structure was previously declared without initialization.
commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly")
added a field that is always read but not consistently populated by all
architectures. This un-initialized field will contain garbage.
This is also triggering a UBSAN warning when the uninitialized data was
accessed:
------------[ cut here ]------------
UBSAN: invalid-load in ./include/linux/kexec.h:210:10
load of value 252 is not a valid value for type '_Bool'
Zero-initializing kexec_buf at declaration ensures all fields are
cleanly set, preventing future instances of uninitialized memory being
used.
Link: https://lkml.kernel.org/r/20250827-kbuf_all-v1-2-1df9882bb01a@debian.org
Fixes: bf454ec31add ("kexec_file: allow to place kexec_buf randomly")
Signed-off-by: Breno Leitao <leitao@debian.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Baoquan He <bhe@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Coiby Xu <coxu@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "kexec: Fix invalid field access".
The kexec_buf structure was previously declared without initialization.
commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly")
added a field that is always read but not consistently populated by all
architectures. This un-initialized field will contain garbage.
This is also triggering a UBSAN warning when the uninitialized data was
accessed:
------------[ cut here ]------------
UBSAN: invalid-load in ./include/linux/kexec.h:210:10
load of value 252 is not a valid value for type '_Bool'
Zero-initializing kexec_buf at declaration ensures all fields are cleanly
set, preventing future instances of uninitialized memory being used.
An initial fix was already landed for arm64[0], and this patchset fixes
the problem on the remaining arm64 code and on riscv, as raised by Mark.
Discussions about this problem could be found at[1][2].
This patch (of 3):
The kexec_buf structure was previously declared without initialization.
commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly")
added a field that is always read but not consistently populated by all
architectures. This un-initialized field will contain garbage.
This is also triggering a UBSAN warning when the uninitialized data was
accessed:
------------[ cut here ]------------
UBSAN: invalid-load in ./include/linux/kexec.h:210:10
load of value 252 is not a valid value for type '_Bool'
Zero-initializing kexec_buf at declaration ensures all fields are
cleanly set, preventing future instances of uninitialized memory being
used.
Link: https://lkml.kernel.org/r/20250827-kbuf_all-v1-0-1df9882bb01a@debian.org
Link: https://lkml.kernel.org/r/20250827-kbuf_all-v1-1-1df9882bb01a@debian.org
Link: https://lore.kernel.org/all/20250826180742.f2471131255ec1c43683ea07@linux-foundation.org/ [0]
Link: https://lore.kernel.org/all/oninomspajhxp4omtdapxnckxydbk2nzmrix7rggmpukpnzadw@c67o7njgdgm3/ [1]
Link: https://lore.kernel.org/all/20250826-akpm-v1-1-3c831f0e3799@debian.org/ [2]
Fixes: bf454ec31add ("kexec_file: allow to place kexec_buf randomly")
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Coiby Xu <coxu@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When creating a new scheme of DAMON_RECLAIM, the calculation of
'min_age_region' uses 'aggr_interval' as the divisor, which may lead to
division-by-zero errors. Fix it by directly returning -EINVAL when such a
case occurs.
Link: https://lkml.kernel.org/r/20250827115858.1186261-3-yanquanmin1@huawei.com
Fixes: f5a79d7c0c87 ("mm/damon: introduce struct damos_access_pattern")
Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: ze zuo <zuoze1@huawei.com>
Cc: <stable@vger.kernel.org> [6.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon: avoid divide-by-zero in DAMON module's parameters
application".
DAMON's RECLAIM and LRU_SORT modules perform no validation on
user-configured parameters during application, which may lead to
division-by-zero errors.
Avoid the divide-by-zero by adding validation checks when DAMON modules
attempt to apply the parameters.
This patch (of 2):
During the calculation of 'hot_thres' and 'cold_thres', either
'sample_interval' or 'aggr_interval' is used as the divisor, which may
lead to division-by-zero errors. Fix it by directly returning -EINVAL
when such a case occurs. Additionally, since 'aggr_interval' is already
required to be set no smaller than 'sample_interval' in damon_set_attrs(),
only the case where 'sample_interval' is zero needs to be checked.
Link: https://lkml.kernel.org/r/20250827115858.1186261-2-yanquanmin1@huawei.com
Fixes: 40e983cca927 ("mm/damon: introduce DAMON-based LRU-lists Sorting")
Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: ze zuo <zuoze1@huawei.com>
Cc: <stable@vger.kernel.org> [6.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Kernel initializes the "jiffies" timer as 5 minutes below zero, as shown
in include/linux/jiffies.h
/*
* Have the 32 bit jiffies value wrap 5 minutes after boot
* so jiffies wrap bugs show up earlier.
*/
#define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ))
And jiffies comparison help functions cast unsigned value to signed to
cover wraparound
#define time_after_eq(a,b) \
(typecheck(unsigned long, a) && \
typecheck(unsigned long, b) && \
((long)((a) - (b)) >= 0))
When quota->charged_from is initialized to 0, time_after_eq() can
incorrectly return FALSE even after reset_interval has elapsed. This
occurs when (jiffies - reset_interval) produces a value with MSB=1, which
is interpreted as negative in signed arithmetic.
This issue primarily affects 32-bit systems because: On 64-bit systems:
MSB=1 values occur after ~292 million years from boot (assuming HZ=1000),
almost impossible.
On 32-bit systems: MSB=1 values occur during the first 5 minutes after
boot, and the second half of every jiffies wraparound cycle, starting from
day 25 (assuming HZ=1000)
When above unexpected FALSE return from time_after_eq() occurs, the
charging window will not reset. The user impact depends on esz value at
that time.
If esz is 0, scheme ignores configured quotas and runs without any limits.
If esz is not 0, scheme stops working once the quota is exhausted. It
remains until the charging window finally resets.
So, change quota->charged_from to jiffies at damos_adjust_quota() when it
is considered as the first charge window. By this change, we can avoid
unexpected FALSE return from time_after_eq()
Link: https://lkml.kernel.org/r/20250822025057.1740854-1-ekffu200098@gmail.com
Fixes: 2b8a248d5873 ("mm/damon/schemes: implement size quota for schemes application speed control") # 5.16
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When restoring a reservation for an anonymous page, we need to check to
freeing a surplus. However, __unmap_hugepage_range() causes data race
because it reads h->surplus_huge_pages without the protection of
hugetlb_lock.
And adjust_reservation is a boolean variable that indicates whether
reservations for anonymous pages in each folio should be restored.
Therefore, it should be initialized to false for each round of the loop.
However, this variable is not initialized to false except when defining
the current adjust_reservation variable.
This means that once adjust_reservation is set to true even once within
the loop, reservations for anonymous pages will be restored
unconditionally in all subsequent rounds, regardless of the folio's state.
To fix this, we need to add the missing hugetlb_lock, unlock the
page_table_lock earlier so that we don't lock the hugetlb_lock inside the
page_table_lock lock, and initialize adjust_reservation to false on each
round within the loop.
Link: https://lkml.kernel.org/r/20250823182115.1193563-1-aha310510@gmail.com
Fixes: df7a6d1f6405 ("mm/hugetlb: restore the reservation if needed")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Reported-by: syzbot+417aeb05fd190f3a6da9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=417aeb05fd190f3a6da9
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Steven Rostedt reported a crash with "ftrace=function" kernel command
line:
[ 0.159269] BUG: kernel NULL pointer dereference, address: 000000000000001c
[ 0.160254] #PF: supervisor read access in kernel mode
[ 0.160975] #PF: error_code(0x0000) - not-present page
[ 0.161697] PGD 0 P4D 0
[ 0.162055] Oops: Oops: 0000 [#1] SMP PTI
[ 0.162619] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.17.0-rc2-test-00006-g48d06e78b7cb-dirty #9 PREEMPT(undef)
[ 0.164141] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 0.165439] RIP: 0010:kmem_cache_alloc_noprof (mm/slub.c:4237)
[ 0.166186] Code: 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 49 89 fc 53 48 83 e4 f0 48 83 ec 20 8b 05 c9 b6 7e 01 <44> 8b 77 1c 65 4c 8b 2d b5 ea 20 02 4c 89 6c 24 18 41 89 f5 21 f0
[ 0.168811] RSP: 0000:ffffffffb2e03b30 EFLAGS: 00010086
[ 0.169545] RAX: 0000000001fff33f RBX: 0000000000000000 RCX: 0000000000000000
[ 0.170544] RDX: 0000000000002800 RSI: 0000000000002800 RDI: 0000000000000000
[ 0.171554] RBP: ffffffffb2e03b80 R08: 0000000000000004 R09: ffffffffb2e03c90
[ 0.172549] R10: ffffffffb2e03c90 R11: 0000000000000000 R12: 0000000000000000
[ 0.173544] R13: ffffffffb2e03c90 R14: ffffffffb2e03c90 R15: 0000000000000001
[ 0.174542] FS: 0000000000000000(0000) GS:ffff9d2808114000(0000) knlGS:0000000000000000
[ 0.175684] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 0.176486] CR2: 000000000000001c CR3: 000000007264c001 CR4: 00000000000200b0
[ 0.177483] Call Trace:
[ 0.177828] <TASK>
[ 0.178123] mas_alloc_nodes (lib/maple_tree.c:176 (discriminator 2) lib/maple_tree.c:1255 (discriminator 2))
[ 0.178692] mas_store_gfp (lib/maple_tree.c:5468)
[ 0.179223] execmem_cache_add_locked (mm/execmem.c:207)
[ 0.179870] execmem_alloc (mm/execmem.c:213 mm/execmem.c:313 mm/execmem.c:335 mm/execmem.c:475)
[ 0.180397] ? ftrace_caller (arch/x86/kernel/ftrace_64.S:169)
[ 0.180922] ? __pfx_ftrace_caller (arch/x86/kernel/ftrace_64.S:158)
[ 0.181517] execmem_alloc_rw (mm/execmem.c:487)
[ 0.182052] arch_ftrace_update_trampoline (arch/x86/kernel/ftrace.c:266 arch/x86/kernel/ftrace.c:344 arch/x86/kernel/ftrace.c:474)
[ 0.182778] ? ftrace_caller_op_ptr (arch/x86/kernel/ftrace_64.S:182)
[ 0.183388] ftrace_update_trampoline (kernel/trace/ftrace.c:7947)
[ 0.184024] __register_ftrace_function (kernel/trace/ftrace.c:368)
[ 0.184682] ftrace_startup (kernel/trace/ftrace.c:3048)
[ 0.185205] ? __pfx_function_trace_call (kernel/trace/trace_functions.c:210)
[ 0.185877] register_ftrace_function_nolock (kernel/trace/ftrace.c:8717)
[ 0.186595] register_ftrace_function (kernel/trace/ftrace.c:8745)
[ 0.187254] ? __pfx_function_trace_call (kernel/trace/trace_functions.c:210)
[ 0.187924] function_trace_init (kernel/trace/trace_functions.c:170)
[ 0.188499] tracing_set_tracer (kernel/trace/trace.c:5916 kernel/trace/trace.c:6349)
[ 0.189088] register_tracer (kernel/trace/trace.c:2391)
[ 0.189642] early_trace_init (kernel/trace/trace.c:11075 kernel/trace/trace.c:11149)
[ 0.190204] start_kernel (init/main.c:970)
[ 0.190732] x86_64_start_reservations (arch/x86/kernel/head64.c:307)
[ 0.191381] x86_64_start_kernel (??:?)
[ 0.191955] common_startup_64 (arch/x86/kernel/head_64.S:419)
[ 0.192534] </TASK>
[ 0.192839] Modules linked in:
[ 0.193267] CR2: 000000000000001c
[ 0.193730] ---[ end trace 0000000000000000 ]---
The crash happens because on x86 ftrace allocations from execmem require
maple tree to be initialized.
Move maple tree initialization that depends only on slab availability
earlier in boot so that it will happen right after mm_core_init().
Link: https://lkml.kernel.org/r/20250824130759.1732736-1-rppt@kernel.org
Fixes: 5d79c2be5081 ("x86/ftrace: enable EXECMEM_ROX_CACHE for ftrace allocations")
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reported-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Closes: https://lore.kernel.org/all/20250820184743.0302a8b5@gandalf.local.home/
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In do_migrate_range(), the hwpoisoned folio may be large folio, which
can't be handled by unmap_poisoned_folio().
I can reproduce this issue in qemu after adding delay in memory_failure()
BUG: kernel NULL pointer dereference, address: 0000000000000000
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
RIP: 0010:try_to_unmap_one+0x16a/0xfc0
<TASK>
rmap_walk_anon+0xda/0x1f0
try_to_unmap+0x78/0x80
? __pfx_try_to_unmap_one+0x10/0x10
? __pfx_folio_not_mapped+0x10/0x10
? __pfx_folio_lock_anon_vma_read+0x10/0x10
unmap_poisoned_folio+0x60/0x140
do_migrate_range+0x4d1/0x600
? slab_memory_callback+0x6a/0x190
? notifier_call_chain+0x56/0xb0
offline_pages+0x3e6/0x460
memory_subsys_offline+0x130/0x1f0
device_offline+0xba/0x110
acpi_bus_offline+0xb7/0x130
acpi_scan_hot_remove+0x77/0x290
acpi_device_hotplug+0x1e0/0x240
acpi_hotplug_work_fn+0x1a/0x30
process_one_work+0x186/0x340
Besides, do_migrate_range() may be called between memory_failure set
hwpoison flag and isolate the folio from lru, so remove WARN_ON(). In other
places, unmap_poisoned_folio() is called when the folio is isolated, obey
it in do_migrate_range() too.
[david@redhat.com: don't abort offlining, fixed typo, add comment]
Link: https://lkml.kernel.org/r/3c214dff-9649-4015-840f-10de0e03ebe4@redhat.com
Fixes: b15c87263a69 ("hwpoison, memory_hotplug: allow hwpoisoned pages to be offlined")
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Raghav <kernel@pankajraghav.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 8ee53820edfd ("thp: mmu_notifier_test_young") introduced
mmu_notifier_test_young(), but we are passing the wrong address.
In xxx_scan_pmd(), the actual iteration address is "_address" not
"address". We seem to misuse the variable on the very beginning.
Change it to the right one.
[akpm@linux-foundation.org fix whitespace, per everyone]
Link: https://lkml.kernel.org/r/20250822063318.11644-1-richard.weiyang@gmail.com
Fixes: 8ee53820edfd ("thp: mmu_notifier_test_young")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small changes including a few regression fixes:
- Regression fix for Intel SKL/KBL HD-audio bindings
- Regression fix for missing Nvidia HDMI codec entries after the
recent code reorganization
- A few TAS2781 codec regression fixes
- Fix for ASoC component lookup breakage
- Usual HD-audio, USB-audio and SOF quirk entries"
* tag 'sound-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: Add pin fix for another HP EliteDesk 800 G4 model
ALSA: usb-audio: Allow Focusrite devices to use low samplerates
ALSA: hda: tas2781: reorder tas2563 calibration variables
ALSA: hda: tas2781: fix tas2563 EFI data endianness
ALSA: firewire-motu: drop EPOLLOUT from poll return values as write is not supported
ALSA: docs: Add documents for recently changes in snd-usb-audio
ALSA: usb-audio: Add mute TLV for playback volumes on more devices
ASoC: SOF: Intel: WCL: Add the sdw_process_wakeen op
ALSA: hda: Avoid binding with SOF for SKL/KBL platforms
ASoC: rsnd: tidyup direction name on rsnd_dai_connect()
ALSA: hda/tas2781: Fix EFI name for calibration beginning with 1 instead of 0
ALSA: usb-audio: move mixer_quirks' min_mute into common quirk
ALSA: hda/realtek: Fix headset mic for TongFang X6[AF]R5xxY
ALSA: hda/hdmi: Restore missing HDMI codec entries
ASoC: codecs: idt821034: fix wrong log in idt821034_chip_direction_output()
ASoC: soc-core: tidyup snd_soc_lookup_component_nolocked()
ASoC: soc-core: care NULL dirver name on snd_soc_lookup_component_nolocked()
ALSA: hda: intel-dsp-config: Select SOF driver on MTL Chromebooks
ALSA: usb-audio: Add mute TLV for playback volumes on some devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes. 13 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels. 11 of these
fixes are for MM.
This includes a three-patch series from Harry Yoo which fixes an
intermittent boot failure which can occur on x86 systems. And a
two-patch series from Alexander Gordeev which fixes a KASAN crash on
S390 systems"
* tag 'mm-hotfixes-stable-2025-09-01-17-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: fix possible deadlock in kmemleak
x86/mm/64: define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings()
mm: introduce and use {pgd,p4d}_populate_kernel()
mm: move page table sync declarations to linux/pgtable.h
proc: fix missing pde_set_flags() for net proc files
mm: fix accounting of memmap pages
mm/damon/core: prevent unnecessary overflow in damos_set_effective_quota()
kexec: add KEXEC_FILE_NO_CMA as a legal flag
kasan: fix GCC mem-intrinsic prefix with sw tags
mm/kasan: avoid lazy MMU mode hazards
mm/kasan: fix vmalloc shadow memory (de-)population races
kunit: kasan_test: disable fortify string checker on kasan_strings() test
selftests/mm: fix FORCE_READ to read input value correctly
mm/userfaultfd: fix kmap_local LIFO ordering for CONFIG_HIGHPTE
ocfs2: prevent release journal inode after journal shutdown
rust: mm: mark VmaNew as transparent
of_numa: fix uninitialized memory nodes causing kernel panic
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix a few races related to inode link count
- fix inode leak on failure to add link to inode
- move transaction aborts closer to where they happen
* tag 'for-6.17-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: avoid load/store tearing races when checking if an inode was logged
btrfs: fix race between setting last_dir_index_offset and inode logging
btrfs: fix race between logging inode and checking if it was logged before
btrfs: simplify error handling logic for btrfs_link()
btrfs: fix inode leak on failure to add link to inode
btrfs: abort transaction on failure to add link to inode
|
|
There are some AA deadlock issues in kmemleak, similar to the situation
reported by Breno [1]. The deadlock path is as follows:
mem_pool_alloc()
-> raw_spin_lock_irqsave(&kmemleak_lock, flags);
-> pr_warn()
-> netconsole subsystem
-> netpoll
-> __alloc_skb
-> __create_object
-> raw_spin_lock_irqsave(&kmemleak_lock, flags);
To solve this problem, switch to printk_safe mode before printing warning
message, this will redirect all printk()-s to a special per-CPU buffer,
which will be flushed later from a safe context (irq work), and this
deadlock problem can be avoided. The proper API to use should be
printk_deferred_enter()/printk_deferred_exit() [2]. Another way is to
place the warn print after kmemleak is released.
Link: https://lkml.kernel.org/r/20250822073541.1886469-1-gubowen5@huawei.com
Link: https://lore.kernel.org/all/20250731-kmemleak_lock-v1-1-728fd470198f@debian.org/#t [1]
Link: https://lore.kernel.org/all/5ca375cd-4a20-4807-b897-68b289626550@redhat.com/ [2]
Signed-off-by: Gu Bowen <gubowen5@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Lu Jialin <lujialin4@huawei.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It was reported that HP EliteDesk 800 G4 DM 65W (SSID 103c:845a) needs
the similar quirk for enabling HDMI outputs, too. This patch adds the
corresponding quirk entry.
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250901115009.27498-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit 05f254a6369ac020fc0382a7cbd3ef64ad997c92 ("ALSA: usb-audio:
Improve filtering of sample rates on Focusrite devices") changed the
check for max_rate in a way which was overly restrictive, forcing
devices to use very high samplerates if they support them, despite
support existing for lower rates as well.
This maintains the intended outcome (ensuring samplerates selected are
supported) while allowing devices with higher maximum samplerates to be
opened at all supported samplerates.
This patch was tested with a Clarett+ 8Pre USB
Fixes: 05f254a6369a ("ALSA: usb-audio: Improve filtering of sample rates on Focusrite devices")
Signed-off-by: Tina Wuest <tina@wuest.me>
Link: https://patch.msgid.link/20250901092024.140993-1-tina@wuest.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Convert the SSB mitigation to the attack vector controls which got
forgotten at the time
- Prevent the CPUID topology hierarchy detection on AMD from
overwriting the correct initial APIC ID
- Fix the case of a machine shipping without microcode in the BIOS, in
the AMD microcode loader
- Correct the Pentium 4 model range which has a constant TSC
* tag 'x86_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Add attack vector controls for SSB
x86/cpu/topology: Use initial APIC ID from XTOPOLOGY leaf on AMD/HYGON
x86/microcode/AMD: Handle the case of no BIOS microcode
x86/cpu/intel: Fix the constant_tsc model check for Pentium 4
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Fix a stall on the CPU offline path due to mis-counting a deadline
server task twice as part of the runqueue's running tasks count
- Fix a realtime tasks starvation case where failure to enqueue a timer
whose expiration time is already in the past would cause repeated
attempts to re-enqueue a deadline server task which leads to starving
the former, realtime one
- Prevent a delayed deadline server task stop from breaking the
per-runqueue bandwidth tracking
- Have a function checking whether the deadline server task has
stopped, return the correct value
* tag 'sched_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Don't count nr_running for dl_server proxy tasks
sched/deadline: Fix RT task potential starvation when expiry time passed
sched/deadline: Always stop dl-server before changing parameters
sched/deadline: Fix dl_server_stopped()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Remove unnecessary and noisy WARN_ONs in gic-v5's init path
- Avoid a kmemleak false positive for the gic-v5's L2 IST table entries
- Fix a retval check in mvebu-gicp's probe function
- Fix a wrong conversion to guards in atmel-aic[5] irqchip
* tag 'irq_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v5: Remove undue WARN_ON()s in the IRS affinity parsing
irqchip/gic-v5: Fix kmemleak L2 IST table entries false positives
irqchip/mvebu-gicp: Fix an IS_ERR() vs NULL check in probe()
irqchip/atmel-aic[5]: Fix incorrect lock guard conversion
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- ARM: stacktrace: include asm/sections.h in asm/stacktrace.h (Arnd
Bergmann)
- ubsan: Fix incorrect hand-side used in handle (Junhui Pei)
- hardening: Require clang 20.1.0 for __counted_by (Nathan Chancellor)
* tag 'hardening-v6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
hardening: Require clang 20.1.0 for __counted_by
ARM: stacktrace: include asm/sections.h in asm/stacktrace.h
ubsan: Fix incorrect hand-side used in handle
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an off-by-one bug in interrupt handling in gpio-timberdale
- update MAINTAINERS
* tag 'gpio-fixes-for-v6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: Change Altera-PIO driver maintainer
gpio: timberdale: fix off-by-one in IRQ type boundary check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- CFI failure due to kpti_ng_pgd_alloc() signature mismatch
- Underallocation bug in the SVE ptrace kselftest
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
kselftest/arm64: Don't open code SVE_PT_SIZE() in fp-ptrace
arm64: mm: Fix CFI failure due to kpti_ng_pgd_alloc function signature
|
|
In fp-trace when allocating a buffer to write SVE register data we open
code the addition of the header size to the VL depeendent register data
size, which lead to an underallocation bug when we cut'n'pasted the code
for FPSIMD format writes. Use the SVE_PT_SIZE() macro that the kernel
UAPI provides for this.
Fixes: b84d2b27954f ("kselftest/arm64: Test FPSIMD format data writes via NT_ARM_SVE in fp-ptrace")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250812-arm64-fp-trace-macro-v1-1-317cfff986a5@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Seen during KPTI initialization:
CFI failure at create_kpti_ng_temp_pgd+0x124/0xce8 (target: kpti_ng_pgd_alloc+0x0/0x14; expected type: 0xd61b88b6)
The call site is alloc_init_pud() at arch/arm64/mm/mmu.c:
pud_phys = pgtable_alloc(TABLE_PUD);
alloc_init_pud() has the prototype:
static void alloc_init_pud(p4d_t *p4dp, unsigned long addr, unsigned long end,
phys_addr_t phys, pgprot_t prot,
phys_addr_t (*pgtable_alloc)(enum pgtable_type),
int flags)
where the pgtable_alloc() prototype is declared.
The target (kpti_ng_pgd_alloc) is used in arch/arm64/kernel/cpufeature.c:
create_kpti_ng_temp_pgd(kpti_ng_temp_pgd, __pa(alloc), KPTI_NG_TEMP_VA,
PAGE_SIZE, PAGE_KERNEL, kpti_ng_pgd_alloc, 0);
which is an alias for __create_pgd_mapping_locked() with prototype:
extern __alias(__create_pgd_mapping_locked)
void create_kpti_ng_temp_pgd(pgd_t *pgdir, phys_addr_t phys,
unsigned long virt,
phys_addr_t size, pgprot_t prot,
phys_addr_t (*pgtable_alloc)(enum pgtable_type),
int flags);
__create_pgd_mapping_locked() passes the function pointer down:
__create_pgd_mapping_locked() -> alloc_init_p4d() -> alloc_init_pud()
But the target function (kpti_ng_pgd_alloc) has the wrong signature:
static phys_addr_t __init kpti_ng_pgd_alloc(int shift);
The "int" should be "enum pgtable_type".
To make "enum pgtable_type" available to cpufeature.c, move
enum pgtable_type definition from arch/arm64/mm/mmu.c to
arch/arm64/include/asm/mmu.h.
Adjust kpti_ng_pgd_alloc to use "enum pgtable_type" instead of "int".
The function behavior remains identical (parameter is unused).
Fixes: c64f46ee1377 ("arm64: mm: use enum to identify pgtable level instead of *_SHIFT")
Cc: <stable@vger.kernel.org> # 6.16.x
Signed-off-by: Kees Cook <kees@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250829190721.it.373-kees@kernel.org
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The tasdev_load_calibrated_data() function expects the calibration data
values in the cali_data buffer as R0, R0Low, InvR0, Power, TLim which
is not the same as what tas2563_save_calibration() writes to the buffer.
Reorder the EFI variables in the tas2563_save_calibration() function
to put the values in the buffer in the correct order.
Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://patch.msgid.link/20250829160450.66623-2-soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Before conversion to unify the calibration data management, the
tas2563_apply_calib() function performed the big endian conversion and
wrote the calibration data to the device. The writing is now done by the
common tasdev_load_calibrated_data() function, but without conversion.
Put the values into the calibration data buffer with the expected
endianness.
Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://patch.msgid.link/20250829160450.66623-1-soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
supported
The ALSA HwDep character device of the firewire-motu driver incorrectly
returns EPOLLOUT in poll(2), even though the driver implements no operation
for write(2). This misleads userspace applications to believe write() is
allowed, potentially resulting in unnecessarily wakeups.
This issue dates back to the driver's initial code added by a commit
71c3797779d3 ("ALSA: firewire-motu: add hwdep interface"), and persisted
when POLLOUT was updated to EPOLLOUT by a commit a9a08845e9ac ('vfs: do
bulk POLL* -> EPOLL* replacement("").').
This commit fixes the bug.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/20250829233749.366222-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Correctly handle 'invariant' system registers for protected VMs
- Improved handling of VNCR data aborts, including external aborts
- Fixes for handling of FEAT_RAS for NV guests, providing a sane
fault context during SEA injection and preventing the use of
RASv1p1 fault injection hardware
- Ensure that page table destruction when a VM is destroyed gives an
opportunity to reschedule
- Large fix to KVM's infrastructure for managing guest context loaded
on the CPU, addressing issues where the output of AT emulation
doesn't get reflected to the guest
- Fix AT S12 emulation to actually perform stage-2 translation when
necessary
- Avoid attempting vLPI irqbypass when GICv4 has been explicitly
disabled for a VM
- Minor KVM + selftest fixes
RISC-V:
- Fix pte settings within kvm_riscv_gstage_ioremap()
- Fix comments in kvm_riscv_check_vcpu_requests()
- Fix stack overrun when setting vlenb via ONE_REG
x86:
- Use array_index_nospec() to sanitize the target vCPU ID when
handling PV IPIs and yields as the ID is guest-controlled.
- Drop a superfluous cpumask_empty() check when reclaiming SEV
memory, as the common case, by far, is that at least one CPU will
have entered the VM, and wbnoinvd_on_cpus_mask() will naturally
handle the rare case where the set of have_run_cpus is empty.
Selftests (not KVM):
- Rename the is_signed_type() macro in kselftest_harness.h to
is_signed_var() to fix a collision with linux/overflow.h. The
collision generates compiler warnings due to the two macros having
different meaning"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (29 commits)
KVM: arm64: nv: Fix ATS12 handling of single-stage translation
KVM: arm64: Remove __vcpu_{read,write}_sys_reg_{from,to}_cpu()
KVM: arm64: Fix vcpu_{read,write}_sys_reg() accessors
KVM: arm64: Simplify sysreg access on exception delivery
KVM: arm64: Check for SYSREGS_ON_CPU before accessing the 32bit state
RISC-V: KVM: fix stack overrun when loading vlenb
RISC-V: KVM: Correct kvm_riscv_check_vcpu_requests() comment
RISC-V: KVM: Fix pte settings within kvm_riscv_gstage_ioremap()
KVM: arm64: selftests: Sync ID_AA64MMFR3_EL1 in set_id_regs
KVM: arm64: Get rid of ARM64_FEATURE_MASK()
KVM: arm64: Make ID_AA64PFR1_EL1.RAS_frac writable
KVM: arm64: Make ID_AA64PFR0_EL1.RAS writable
KVM: arm64: Ignore HCR_EL2.FIEN set by L1 guest's EL2
KVM: arm64: Handle RASv1p1 registers
arm64: Add capability denoting FEAT_RASv1p1
KVM: arm64: Reschedule as needed when destroying the stage-2 page-tables
KVM: arm64: Split kvm_pgtable_stage2_destroy()
selftests: harness: Rename is_signed_type() to avoid collision with overflow.h
KVM: SEV: don't check have_run_cpus in sev_writeback_caches()
KVM: arm64: Correctly populate FAR_EL2 on nested SEA injection
...
|
|
After an innocuous change in -next that modified a structure that
contains __counted_by, clang-19 start crashing when building certain
files in drivers/gpu/drm/xe. When assertions are enabled, the more
descriptive failure is:
clang: clang/lib/AST/RecordLayoutBuilder.cpp:3335: const ASTRecordLayout &clang::ASTContext::getASTRecordLayout(const RecordDecl *) const: Assertion `D && "Cannot get layout of forward declarations!"' failed.
According to a reverse bisect, a tangential change to the LLVM IR
generation phase of clang during the LLVM 20 development cycle [1]
resolves this problem. Bump the version of clang that enables
CONFIG_CC_HAS_COUNTED_BY to 20.1.0 to ensure that this issue cannot be
hit.
Link: https://github.com/llvm/llvm-project/commit/160fb1121cdf703c3ef5e61fb26c5659eb581489 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20250807-fix-counted_by-clang-19-v1-1-902c86c1d515@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.17, take #2
- Correctly handle 'invariant' system registers for protected VMs
- Improved handling of VNCR data aborts, including external aborts
- Fixes for handling of FEAT_RAS for NV guests, providing a sane
fault context during SEA injection and preventing the use of
RASv1p1 fault injection hardware
- Ensure that page table destruction when a VM is destroyed gives an
opportunity to reschedule
- Large fix to KVM's infrastructure for managing guest context loaded
on the CPU, addressing issues where the output of AT emulation
doesn't get reflected to the guest
- Fix AT S12 emulation to actually perform stage-2 translation when
necessary
- Avoid attempting vLPI irqbypass when GICv4 has been explicitly
disabled for a VM
- Minor KVM + selftest fixes
|
|
into HEAD
KVM/riscv fixes for 6.17, take #1
- Fix pte settings within kvm_riscv_gstage_ioremap()
- Fix comments in kvm_riscv_check_vcpu_requests()
- Fix stack overrun when setting vlenb via ONE_REG
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Assorted fixes for the OP-TEE based pseudo-EFI variable store
- Fix for an OOB access when looking up the same non-existing efivarfs
entry multiple times in parallel
* tag 'efi-fixes-for-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efivarfs: Fix slab-out-of-bounds in efivarfs_d_compare
efi: stmm: Drop unneeded null pointer check
efi: stmm: Drop unused EFI error from setup_mm_hdr arguments
efi: stmm: Do not return EFI_OUT_OF_RESOURCES on internal errors
efi: stmm: Fix incorrect buffer allocation method
|
|
Pull smb client fixes from Steve French:
- Fix possible refcount leak in compound operations
- Fix remap_file_range() return code mapping, found by generic/157
* tag 'v6.17-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
fs/smb: Fix inconsistent refcnt update
smb3 client: fix return code mapping of remap_file_range
|
|
Pull xfs fixes from Carlos Maiolino:
"The highlight I'd like to point here is related to the XFS_RT
Kconfig, which has been updated to be enabled by default now if
CONFIG_BLK_DEV_ZONED is enabled.
This also contains a few fixes for zoned devices support in XFS,
specially related to swapon requests in inodes belonging to the zoned
FS.
A null-ptr dereference fix in the xattr data, due to a mishandling of
medium errors generated by block devices is also included"
* tag 'xfs-fixes-6.17-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: do not propagate ENODATA disk errors into xattr code
xfs: reject swapon for inodes on a zoned file system earlier
xfs: kick off inodegc when failing to reserve zoned blocks
xfs: remove xfs_last_used_zone
xfs: Default XFS_RT to Y if CONFIG_BLK_DEV_ZONED is enabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fixes for memory corruption in intel-thc-hid, hid-multitouch,
hid-mcp2221 and hid-asus (Aaron Ma, Qasim Ijaz, Arnaud Lecomte)
- power management/resume fix for intel-ish-hid (Zhang Lixu)
- driver reinitialization fix for intel-thc-hid (Even Xu)
- ensure that battery level status is reported as soon as possible,
which is required at least for some Android use-cases (José Expósito)
- quite a few new device ID additions and device-specific quirks
* tag 'hid-for-linus-2025082901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: quirks: add support for Legion Go dual dinput modes
HID: elecom: add support for ELECOM M-DT2DRBK
HID: logitech: Add ids for G PRO 2 LIGHTSPEED
HID: input: report battery status changes immediately
HID: input: rename hidinput_set_battery_charge_status()
HID: intel-thc-hid: Intel-quicki2c: Enhance driver re-install flow
HID: hid-ntrig: fix unable to handle page fault in ntrig_report_version()
HID: asus: fix UAF via HID_CLAIMED_INPUT validation
hid: fix I2C read buffer overflow in raw_event() for mcp2221
HID: wacom: Add a new Art Pen 2
HID: multitouch: fix slab out-of-bounds access in mt_report_fixup()
HID: Kconfig: Fix spelling mistake "enthropy" -> "entropy"
HID: intel-ish-hid: Increase ISHTP resume ack timeout to 300ms
HID: intel-thc-hid: intel-thc: Fix incorrect pointer arithmetic in I2C regs save
HID: intel-thc-hid: intel-quicki2c: Fix ACPI dsd ICRS/ISUB length
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One simple fix for the pm8008 driver for poor error handling,
switching to use a helper which does the right thing in the
affected case"
* tag 'regulator-fix-v6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: pm8008: fix probe failure due to negative voltage selector
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Fix the type of return values to be signed in the ahci_xgen driver
(Qianfeng)
- Add the mask_port_ext module parameter to the ahci driver.
This is to allow a user to ignore ports that are advertized as
external (hotplug capable) in favor of lower link power management
policies instead of the default max_performance for these ports.
This is useful to allow e.g. laptops to go into low power states when
hooked up to docking station with sata slots, connected with an
external port for hotplug (me)
* tag 'ata-6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci_xgene: Use int type for 'rc' to store error codes
ata: ahci: Allow ignoring the external/hotplug capability of ports
|
|
Changed:
- ignore_ctl_error
- lowlatency
- skip_validation
- quirk_flags[19:24]
[ corrected a typo -- tiwai ]
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Link: https://patch.msgid.link/20250829-sound-doc-v1-1-e0110452b03d@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.17
The main fixes here are for some of the cleanups done in the core in
this release, we had broken component lookup in the case with a single
bus and DMA controller. Otherwise it's driver specific changes, the
shortlogs for the Intel WCL and rsnd drivers look like minor cleanups
but are actually bugfixes (adding an op needed for correct functionality
and reverting an inappropriate helper usage).
|
|
Applying the quirk of that, the lowest Playback mixer volume setting
mutes the audio output, on more devices.
Suggested-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Signed-off-by: qaqland <anguoli@uniontech.com>
Link: https://patch.msgid.link/20250829-sound_quirk-v1-1-745529b44440@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, feels a bit big.
The major piece is msm fixes, then the usual amdgpu/xe along with some
mediatek and nouveau fixes and a tegra revert.
gpuvm:
- fix some typos
xe:
- Fix user-fence race issue
- Couple xe_vm fixes
- Don't trigger rebind on initial dma-buf validation
- Fix a build issue related to basename() posix vs gnu discrepancy
amdgpu:
- pin buffers while vmapping
- UserQ fixes
- Revert CSA fix
- SR-IOV fix
nouveau:
- fix linear modifier
- remove some dead code
msm:
- Core/GPU:
- fix comment doc warning in gpuvm
- fix build with KMS disabled
- fix pgtable setup/teardown race
- global fault counter fix
- various error path fixes
- GPU devcoredump snapshot fixes
- handle in-place VM_BIND remaps to solve turnip vm update race
- skip re-emitting IBs for unusable VMs
- Don't use %pK through printk
- moved display snapshot init earlier, fixing a crash
- DPU:
- Fixed crash in virtual plane checking code
- Fixed mode comparison in virtual plane checking code
- DSI:
- Adjusted width of resulution-related registers
- Fixed locking issue on 14nm PLLs
- UBWC (per Bjorn's ack)
- Added UBWC configuration for several missing platforms (fixing
regression)
mediatek:
- Add error handling for old state CRTC in atomic_disable
- Fix DSI host and panel bridge pre-enable order
- Fix device/node reference count leaks in mtk_drm_get_all_drm_priv
- mtk_hdmi: Fix inverted parameters in some regmap_update_bits calls
tegra:
- revert dma-buf change"
* tag 'drm-fixes-2025-08-29' of https://gitlab.freedesktop.org/drm/kernel: (56 commits)
drm/mediatek: mtk_hdmi: Fix inverted parameters in some regmap_update_bits calls
drm/amdgpu/userq: fix error handling of invalid doorbell
drm/amdgpu: update firmware version checks for user queue support
drm/amd/amdgpu: disable hwmon power1_cap* for gfx 11.0.3 on vf mode
Revert "drm/amdgpu: fix incorrect vm flags to map bo"
drm/amdgpu/gfx12: set MQD as appriopriate for queue types
drm/amdgpu/gfx11: set MQD as appriopriate for queue types
drm/xe: switch to local xbasename() helper
drm/xe: Don't trigger rebind on initial dma-buf validation
drm/xe/vm: Clear the scratch_pt pointer on error
drm/xe/vm: Don't pin the vm_resv during validation
drm/xe/xe_sync: avoid race during ufence signaling
Revert "drm/tegra: Use dma_buf from GEM object instance"
soc: qcom: use no-UBWC config for MSM8956/76
soc: qcom: add configuration for MSM8929
soc: qcom: ubwc: add more missing platforms
soc: qcom: ubwc: use no-uwbc config for MSM8917
drm/msm/dpu: Add a null ptr check for dpu_encoder_needs_modeset
dt-bindings: display/msm: qcom,mdp5: drop lut clock
drm/gpuvm: fix various typos in .c and .h gpuvm file
...
|
|
Pull block fixes from Jens Axboe:
- Fix a lockdep spotted issue on recursive locking for zoned writes, in
case of errors
- Update bcache MAINTAINERS entry address for Coly
- Fix for a ublk release issue, with selftests
- Fix for a regression introduced in this cycle, where it assumed
q->rq_qos was always set if the bio flag indicated that
- Fix for a regression introduced in this cycle, where loop retrieving
block device sizes got broken
* tag 'block-6.17-20250828' of git://git.kernel.dk/linux:
bcache: change maintainer's email address
ublk selftests: add --no_ublk_fixed_fd for not using registered ublk char device
ublk: avoid ublk_io_release() called after ublk char dev is closed
block: validate QoS before calling __rq_qos_done_bio()
blk-zoned: Fix a lockdep complaint about recursive locking
loop: fix zero sized loop for block special file
|
|
Pull io_uring fixes from Jens Axboe:
- Use the proper type for min_t() in getting the min of the leftover
bytes and the buffer length.
- As good practice, use READ_ONCE() consistently for reading ring
provided buffer lengths. Additionally, stop looping for incremental
commits if a zero sized buffer is hit, as no further progress can be
made at that point.
* tag 'io_uring-6.17-20250828' of git://git.kernel.dk/linux:
io_uring/kbuf: always use READ_ONCE() to read ring provided buffer lengths
io_uring/kbuf: fix signedness in this_len calculation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth.
Current release - regressions:
- ipv4: fix regression in local-broadcast routes
- vsock: fix error-handling regression introduced in v6.17-rc1
Previous releases - regressions:
- bluetooth:
- mark connection as closed during suspend disconnect
- fix set_local_name race condition
- eth:
- ice: fix NULL pointer dereference on reset
- mlx5: fix memory leak in hws_pool_buddy_init error path
- bnxt_en: fix stats context reservation logic
- hv: fix loss of receive events from host during channel open
Previous releases - always broken:
- page_pool: fix incorrect mp_ops error handling
- sctp: initialize more fields in sctp_v6_from_sk()
- eth:
- octeontx2-vf: fix max packet length errors
- idpf: fix Tx flow scheduling to avoid Tx timeouts
- bnxt_en: fix memory corruption during ifdown
- ice: fix incorrect counter for buffer allocation failures
- mlx5: fix lockdep assertion on sync reset unload event
- fbnic: fixup rtnl_lock and devl_lock handling
- xgmac: do not enable RX FIFO overflow interrupts
- phy: mscc: fix when PTP clock is register and unregister
Misc:
- add Telit Cinterion LE910C4-WWX new compositions"
* tag 'net-6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits)
net: ipv4: fix regression in local-broadcast routes
net: macb: Disable clocks once
fbnic: Move phylink resume out of service_task and into open/close
fbnic: Fixup rtnl_lock and devl_lock handling related to mailbox code
net: rose: fix a typo in rose_clear_routes()
l2tp: do not use sock_hold() in pppol2tp_session_get_sock()
sctp: initialize more fields in sctp_v6_from_sk()
MAINTAINERS: rmnet: Update email addresses
net: rose: include node references in rose_neigh refcount
net: rose: convert 'use' field to refcount_t
net: rose: split remove and free operations in rose_remove_neigh()
net: hv_netvsc: fix loss of early receive events from host during channel open.
net: stmmac: Set CIC bit only for TX queues with COE
net: stmmac: xgmac: Correct supported speed modes
net: stmmac: xgmac: Do not enable RX FIFO Overflow interrupts
net/mlx5e: Set local Xoff after FW update
net/mlx5e: Update and set Xon/Xoff upon port speed set
net/mlx5e: Update and set Xon/Xoff upon MTU set
net/mlx5: Prevent flow steering mode changes in switchdev mode
net/mlx5: Nack sync reset when SFs are present
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes - 20250829
1. Add error handling for old state CRTC in atomic_disable
2. Fix DSI host and panel bridge pre-enable order
3. Fix device/node reference count leaks in mtk_drm_get_all_drm_priv
4. mtk_hdmi: Fix inverted parameters in some regmap_update_bits calls
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20250828234116.4960-1-chunkuang.hu@kernel.org
|
