Age | Commit message (Collapse) | Author |
|
Many nvme metadata formats can not strip or generate the metadata on the
controller side. For these formats, a host provided integrity buffer is
mandatory even if it isn't checked.
The block integrity read_verify and write_generate attributes prevent
allocating the metadata buffer, but we need it when the format requires
it, otherwise reads and writes will be rejected by the driver with IO
errors.
Assume the integrity buffer can be offloaded to the controller if the
metadata size is the same as the protection information size. Otherwise
provide an unchecked host buffer when the read verify or write
generation attributes are disabled. This fixes the following nvme
warning:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 371 at drivers/nvme/host/core.c:1036 nvme_setup_rw+0x122/0x210
...
RIP: 0010:nvme_setup_rw+0x122/0x210
...
Call Trace:
<TASK>
nvme_setup_cmd+0x1b4/0x280
nvme_queue_rqs+0xc4/0x1f0 [nvme]
blk_mq_dispatch_queue_requests+0x24a/0x430
blk_mq_flush_plug_list+0x50/0x140
__blk_flush_plug+0xc1/0x100
__submit_bio+0x1c1/0x360
? submit_bio_noacct_nocheck+0x2d6/0x3c0
submit_bio_noacct_nocheck+0x2d6/0x3c0
? submit_bio_noacct+0x47/0x4c0
submit_bio_wait+0x48/0xa0
__blkdev_direct_IO_simple+0xee/0x210
? current_time+0x1d/0x100
? current_time+0x1d/0x100
? __bio_clone+0xb0/0xb0
blkdev_read_iter+0xbb/0x140
vfs_read+0x239/0x310
ksys_read+0x58/0xc0
do_syscall_64+0x6c/0x180
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250509153802.3482493-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the effective written size instead of original size as index for zero
termination. If the input from user-space is to larger and the input is
truncated, the original size is out-of-bound.
Since there is an upfront size check here, the change is for consistency.
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250508130612.82270-3-markus.burri@mt.com
|
|
Fix a typo in an email address.
Closes: https://lore.kernel.org/all/20240925-rational-succinct-vulture-cca9fb@lemur/T/
Reported-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Reported-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Alexey Makhalov <alexey.makhalov@broadcom.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250318004031.2703923-1-alexey.makhalov@broadcom.com
|
|
Use the BIT() and BIT_ULL() macros in the new audit code instead of
explicit shifts to improve readability. Use bitmask instead of modulo
operation to simplify code.
Add test_range1_rand15() and test_range2_rand15() KUnit tests to improve
get_id_range() coverage.
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20250512093732.1408485-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Since commit 559358282e5b ("drm/fb-helper: Don't use the preferred depth
for the BPP default"), RGB565 displays such as the CFAF240320X no longer
render correctly: colors are distorted and the content is shown twice
horizontally.
This regression is due to the fbdev emulation layer defaulting to 32 bits
per pixel, whereas the display expects 16 bpp (RGB565). As a result, the
framebuffer data is incorrectly interpreted by the panel.
Fix the issue by calling drm_client_setup_with_fourcc() with a format
explicitly selected based on the display's bits-per-pixel value. For 16
bpp, use DRM_FORMAT_RGB565; for other values, fall back to the previous
behavior. This ensures that the allocated framebuffer format matches the
hardware expectations, avoiding color and layout corruption.
Tested on a CFAF240320X display with an RGB565 configuration, confirming
correct colors and layout after applying this patch.
Cc: stable@vger.kernel.org
Fixes: 559358282e5b ("drm/fb-helper: Don't use the preferred depth for the BPP default")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250417103458.2496790-1-festevam@gmail.com
|
|
The filenames in the comments do not match the actual generated files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This reverts commit dbdffaf50ff9cee3259a7cef8a7bd9e0f0ba9f13.
--remap-path-prefix breaks the ability of debuggers to find the source
file corresponding to object files. As there is no simple or uniform
way to specify the source directory explicitly, this breaks developers
workflows.
Revert the unconditional usage of --remap-path-prefix, equivalent to the
same change for -ffile-prefix-map in KBUILD_CPPFLAGS.
Fixes: dbdffaf50ff9 ("kbuild, rust: use -fremap-path-prefix to make paths relative")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This reverts commit cacd22ce69585a91c386243cd662ada962431e63.
-ffile-prefix-map breaks the ability of debuggers to find the source
file corresponding to object files. As there is no simple or uniform
way to specify the source directory explicitly, this breaks developers
workflows.
Revert the unconditional usage of -ffile-prefix-map.
Reported-by: Matthieu Baerts <matttbe@kernel.org>
Closes: https://lore.kernel.org/lkml/edc50aa7-0740-4942-8c15-96f12f2acc7e@kernel.org/
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Closes: https://lore.kernel.org/lkml/aBEttQH4kimHFScx@intel.com/
Fixes: cacd22ce6958 ("kbuild: make all file references relative to source root")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit ac4f06789b4f ("kbuild: Create intermediate vmlinux build with
relocations preserved") missed replacing one occurrence of "vmlinux"
that was added during the same development cycle.
Fixes: ac4f06789b4f ("kbuild: Create intermediate vmlinux build with relocations preserved")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
|
|
This is a leftover from commit 98e20e5e13d2 ("bpfilter: remove bpfilter").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Building the kernel with O= is affected by stale in-tree build artifacts.
So, if the source tree is not clean, Kbuild displays the following:
$ make ARCH=um O=build defconfig
make[1]: Entering directory '/.../linux/build'
***
*** The source tree is not clean, please run 'make ARCH=um mrproper'
*** in /.../linux
***
make[2]: *** [/.../linux/Makefile:673: outputmakefile] Error 1
make[1]: *** [/.../linux/Makefile:248: __sub-make] Error 2
make[1]: Leaving directory '/.../linux/build'
make: *** [Makefile:248: __sub-make] Error 2
Usually, running 'make mrproper' is sufficient for cleaning the source
tree for out-of-tree builds.
However, building UML generates build artifacts not only in arch/um/,
but also in the SUBARCH directory (i.e., arch/x86/). If in-tree stale
files remain under arch/x86/, Kbuild will reuse them instead of creating
new ones under the specified build directory.
This commit makes 'make ARCH=um clean' recurse into the SUBARCH directory.
Reported-by: Shuah Khan <skhan@linuxfoundation.org>
Closes: https://lore.kernel.org/lkml/20250502172459.14175-1-skhan@linuxfoundation.org/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
A new on by default warning in clang [1] aims to flags instances where
const variables without static or thread local storage or const members
in aggregate types are not initialized because it can lead to an
indeterminate value. This is quite noisy for the kernel due to
instances originating from header files such as:
drivers/gpu/drm/i915/gt/intel_ring.h:62:2: error: default initialization of an object of type 'typeof (ring->size)' (aka 'const unsigned int') leaves the object uninitialized [-Werror,-Wdefault-const-init-var-unsafe]
62 | typecheck(typeof(ring->size), next);
| ^
include/linux/typecheck.h:10:9: note: expanded from macro 'typecheck'
10 | ({ type __dummy; \
| ^
include/net/ip.h:478:14: error: default initialization of an object of type 'typeof (rt->dst.expires)' (aka 'const unsigned long') leaves the object uninitialized [-Werror,-Wdefault-const-init-var-unsafe]
478 | if (mtu && time_before(jiffies, rt->dst.expires))
| ^
include/linux/jiffies.h:138:26: note: expanded from macro 'time_before'
138 | #define time_before(a,b) time_after(b,a)
| ^
include/linux/jiffies.h:128:3: note: expanded from macro 'time_after'
128 | (typecheck(unsigned long, a) && \
| ^
include/linux/typecheck.h:11:12: note: expanded from macro 'typecheck'
11 | typeof(x) __dummy2; \
| ^
include/linux/list.h:409:27: warning: default initialization of an object of type 'union (unnamed union at include/linux/list.h:409:27)' with const member leaves the object uninitialized [-Wdefault-const-init-field-unsafe]
409 | struct list_head *next = smp_load_acquire(&head->next);
| ^
include/asm-generic/barrier.h:176:29: note: expanded from macro 'smp_load_acquire'
176 | #define smp_load_acquire(p) __smp_load_acquire(p)
| ^
arch/arm64/include/asm/barrier.h:164:59: note: expanded from macro '__smp_load_acquire'
164 | union { __unqual_scalar_typeof(*p) __val; char __c[1]; } __u; \
| ^
include/linux/list.h:409:27: note: member '__val' declared 'const' here
crypto/scatterwalk.c:66:22: error: default initialization of an object of type 'struct scatter_walk' with const member leaves the object uninitialized [-Werror,-Wdefault-const-init-field-unsafe]
66 | struct scatter_walk walk;
| ^
include/crypto/algapi.h:112:15: note: member 'addr' declared 'const' here
112 | void *const addr;
| ^
fs/hugetlbfs/inode.c:733:24: error: default initialization of an object of type 'struct vm_area_struct' with const member leaves the object uninitialized [-Werror,-Wdefault-const-init-field-unsafe]
733 | struct vm_area_struct pseudo_vma;
| ^
include/linux/mm_types.h:803:20: note: member 'vm_flags' declared 'const' here
803 | const vm_flags_t vm_flags;
| ^
Silencing the instances from typecheck.h is difficult because '= {}' is
not available in older but supported compilers and '= {0}' would cause
warnings about a literal 0 being treated as NULL. While it might be
possible to come up with a local hack to silence the warning for
clang-21+, it may not be worth it since -Wuninitialized will still
trigger if an uninitialized const variable is actually used.
In all audited cases of the "field" variant of the warning, the members
are either not used in the particular call path, modified through other
means such as memset() / memcpy() because the containing object is not
const, or are within a union with other non-const members.
Since this warning does not appear to have a high signal to noise ratio,
just disable it.
Cc: stable@vger.kernel.org
Link: https://github.com/llvm/llvm-project/commit/576161cb6069e2c7656a8ef530727a0f4aefff30 [1]
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/CA+G9fYuNjKcxFKS_MKPRuga32XbndkLGcY-PVuoSwzv6VWbY=w@mail.gmail.com/
Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Closes: https://github.com/ClangBuiltLinux/linux/issues/2088
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The dwarf.h header, which is included by
scripts/gendwarfksyms/gendwarfksyms.h, resides within elfutils-devel
or libdw-devel package.
This portion of the code is compiled under the condition that
CONFIG_GENDWARFKSYMS is enabled.
Consequently, add (elfutils-devel or libdw-devel) to BuildRequires to
prevent unforeseen compilation failures.
Fix follow possible error:
In file included from scripts/gendwarfksyms/cache.c:6:
scripts/gendwarfksyms/gendwarfksyms.h:6:10: fatal error: 'dwarf.h' file not found
6 | #include <dwarf.h>
| ^~~~~~~~~
Link: https://lore.kernel.org/all/3e52d80d-0c60-4df5-8cb5-21d4b1fce7b7@suse.com/
Fixes: f28568841ae0 ("tools: Add gendwarfksyms")
Suggested-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The dwarf.h header, which is included by
scripts/gendwarfksyms/gendwarfksyms.h, resides within the libdw-dev
package.
This portion of the code is compiled under the condition that
CONFIG_GENDWARFKSYMS is enabled.
Consequently, add libdw-dev to Build-Depends-Arch to prevent
unforeseen compilation failures.
Fix follow possible error:
In file included from scripts/gendwarfksyms/symbols.c:6:
scripts/gendwarfksyms/gendwarfksyms.h:6:10: fatal error: 'dwarf.h' file not found
6 | #include <dwarf.h>
| ^~~~~~~~~
Fixes: f28568841ae0 ("tools: Add gendwarfksyms")
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Tested-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Since openrisc does not support PERF_EVENTS, omit the HDRTEST of
bpf_perf_event.h for arch/openrisc/.
Fixes a build error:
usr/include/linux/bpf_perf_event.h:14:28: error: field 'regs' has incomplete type
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
With CONFIG_GENDWARFKSYMS, __gendwarfksyms_ptr variables are
added to the kernel in EXPORT_SYMBOL() to ensure DWARF type
information is available for exported symbols in the TUs where
they're actually exported. These symbols are dropped when linking
vmlinux, but dangling references to them remain in DWARF.
With CONFIG_DEBUG_INFO_BTF enabled on X86, pahole versions after
commit 47dcb534e253 ("btf_encoder: Stop indexing symbols for
VARs") and before commit 9810758003ce ("btf_encoder: Verify 0
address DWARF variables are in ELF section") place these symbols
in the .data..percpu section, which results in an "Invalid
offset" error in btf_datasec_check_meta() during boot, as all
the variables are at zero offset and have non-zero size. If
CONFIG_DEBUG_INFO_BTF_MODULES is enabled, this also results in a
failure to load modules with:
failed to validate module [$module] BTF: -22
As the issue occurs in pahole v1.28 and the fix was merged
after v1.29 was released, require pahole <v1.28 or >v1.29 when
GENDWARFKSYMS is enabled with DEBUG_INFO_BTF on X86.
Reported-by: Paolo Pisati <paolo.pisati@canonical.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 cBPF BHB mitigation from James Morse:
"This adds the BHB mitigation into the code JITted for cBPF programs as
these can be loaded by unprivileged users via features like seccomp.
The existing mechanisms to disable the BHB mitigation will also
prevent the mitigation being JITted. In addition, cBPF programs loaded
by processes with the SYS_ADMIN capability are not mitigated as these
could equally load an eBPF program that does the same thing.
For good measure, the list of 'k' values for CPU's local mitigations
is updated from the version on arm's website"
* tag 'arm64_cbpf_mitigation_2025_05_08' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: proton-pack: Add new CPUs 'k' values for branch mitigation
arm64: bpf: Only mitigate cBPF programs loaded by unprivileged users
arm64: bpf: Add BHB mitigation to the epilogue for cBPF programs
arm64: proton-pack: Expose whether the branchy loop k value
arm64: proton-pack: Expose whether the platform is mitigated by firmware
arm64: insn: Add support for encoding DSB
|
|
As David pointed out, what truly matters for mremap and userfaultfd move
operations is the soft dirty bit. The current comment and
implementation—which always sets the dirty bit for present PTEs and
fails to set the soft dirty bit for swap PTEs—are incorrect. This could
break features like Checkpoint-Restore in Userspace (CRIU).
This patch updates the behavior to correctly set the soft dirty bit for
both present and swap PTEs in accordance with mremap.
Link: https://lkml.kernel.org/r/20250508220912.7275-1-21cnbao@gmail.com
Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI")
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reported-by: David Hildenbrand <david@redhat.com>
Closes: https://lore.kernel.org/linux-mm/02f14ee1-923f-47e3-a994-4950afb9afcc@redhat.com/
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Do not mix class->size and object size during offsets/sizes calculation in
zs_obj_write(). Size classes can merge into clusters, based on
objects-per-zspage and pages-per-zspage characteristics, so some size
classes can store objects smaller than class->size. This becomes
problematic when object size is much smaller than class->size. zsmalloc
can falsely decide that object spans two physical pages, because a larger
class->size value is used for that check, while the actual object is much
smaller and fits the free space of the first physical page, so there is
nothing to write to the second page and memcpy() size calculation
underflows.
Unable to handle kernel paging request at virtual address ffffc00081ff4000
pc : __memcpy+0x10/0x24
lr : zs_obj_write+0x1b0/0x1d0 [zsmalloc]
Call trace:
__memcpy+0x10/0x24 (P)
zram_write_page+0x150/0x4fc [zram]
zram_submit_bio+0x5e0/0x6a4 [zram]
__submit_bio+0x168/0x220
submit_bio_noacct_nocheck+0x128/0x2c8
submit_bio_noacct+0x19c/0x2f8
This is mostly seen on system with larger page-sizes, because size class
cluters of such systems hold wider size ranges than on 4K PAGE_SIZE
systems.
Assume a 16K PAGE_SIZE system, a write of 820 bytes object to a 864-bytes
size class at offset 15560. 15560 + 864 is more than 16384 so zsmalloc
attempts to memcpy() it to two physical pages. However, 16384 - 15560 =
824 which is more than 820, so the object in fact doesn't span two
physical pages, and there is no data to write to the second physical page.
We always know the exact size in bytes of the object that we are about to
write (store), so use it instead of class->size.
Link: https://lkml.kernel.org/r/20250507054312.4135983-1-senozhatsky@chromium.org
Fixes: 44f76413496e ("zsmalloc: introduce new object mapping API")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reported-by: Igor Belousov <igor.b@beldev.am>
Tested-by: Igor Belousov <igor.b@beldev.am>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The page allocator tracks the number of zones that have unaccepted memory
using static_branch_enc/dec() and uses that static branch in hot paths to
determine if it needs to deal with unaccepted memory.
Borislav and Thomas pointed out that the tracking is racy: operations on
static_branch are not serialized against adding/removing unaccepted pages
to/from the zone.
Sanity checks inside static_branch machinery detects it:
WARNING: CPU: 0 PID: 10 at kernel/jump_label.c:276 __static_key_slow_dec_cpuslocked+0x8e/0xa0
The comment around the WARN() explains the problem:
/*
* Warn about the '-1' case though; since that means a
* decrement is concurrent with a first (0->1) increment. IOW
* people are trying to disable something that wasn't yet fully
* enabled. This suggests an ordering problem on the user side.
*/
The effect of this static_branch optimization is only visible on
microbenchmark.
Instead of adding more complexity around it, remove it altogether.
Link: https://lkml.kernel.org/r/20250506133207.1009676-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Fixes: dcdfdd40fa82 ("mm: Add support for unaccepted memory")
Link: https://lore.kernel.org/all/20250506092445.GBaBnVXXyvnazly6iF@fat_crate.local
Reported-by: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
try_alloc_pages() will not attempt to allocate memory if the system has
*any* unaccepted memory. Memory is accepted as needed and can remain in
the system indefinitely, causing the interface to always fail.
Rather than immediately giving up, attempt to use already accepted memory
on free lists.
Pass 'alloc_flags' to cond_accept_memory() and do not accept new memory
for ALLOC_TRYLOCK requests.
Found via code inspection - only BPF uses this at present and the
runtime effects are unclear.
Link: https://lkml.kernel.org/r/20250506112509.905147-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Fixes: 97769a53f117 ("mm, bpf: Introduce try_alloc_pages() for opportunistic page allocation")
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As part of the ongoing efforts to sub-divide memory management
maintainership and reviewership, establish a section for GUP (Get User
Pages) support and add appropriate maintainers and reviewers.
Link: https://lkml.kernel.org/r/20250506173601.97562-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 51ff4d7486f0 ("mm: avoid extra mem_alloc_profiling_enabled()
checks") introduces a possible use-after-free scenario, when page
is non-compound, page[0] could be released by other thread right
after put_page_testzero failed in current thread, pgalloc_tag_sub_pages
afterwards would manipulate an invalid page for accounting remaining
pages:
[timeline] [thread1] [thread2]
| alloc_page non-compound
V
| get_page, rf counter inc
V
| in ___free_pages
| put_page_testzero fails
V
| put_page, page released
V
| in ___free_pages,
| pgalloc_tag_sub_pages
| manipulate an invalid page
V
Restore __free_pages() to its state before, retrieve alloc tag
beforehand.
Link: https://lkml.kernel.org/r/20250505193034.91682-1-00107082@163.com
Fixes: 51ff4d7486f0 ("mm: avoid extra mem_alloc_profiling_enabled() checks")
Signed-off-by: David Wang <00107082@163.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The following WARNING was triggered during swap stress test with mTHP
enabled:
[ 6609.335758] ------------[ cut here ]------------
[ 6609.337758] WARNING: CPU: 82 PID: 755116 at mm/memory.c:3794 do_wp_page+0x1084/0x10e0
[ 6609.340922] Modules linked in: zram virtiofs
[ 6609.342699] CPU: 82 UID: 0 PID: 755116 Comm: sh Kdump: loaded Not tainted 6.15.0-rc1+ #1429 PREEMPT(voluntary)
[ 6609.347620] Hardware name: Red Hat KVM/RHEL-AV, BIOS 0.0.0 02/06/2015
[ 6609.349909] RIP: 0010:do_wp_page+0x1084/0x10e0
[ 6609.351532] Code: ff ff 48 c7 c6 80 ba 49 82 4c 89 ef e8 95 fd fe ff 0f 0b bd f5 ff ff ff e9 43 fb ff ff 41 83 a9 bc 12 00 00 01 e9 5c fb ff ff <0f> 0b e9 a6 fc ff ff 65 ff 00 f0 48 0f b
a 6d 00 1f 0f 83 82 fc ff
[ 6609.357959] RSP: 0000:ffffc90002273d40 EFLAGS: 00010287
[ 6609.359915] RAX: 000000000000000f RBX: 0000000000000000 RCX: 000fffffffe00000
[ 6609.362606] RDX: 0000000000000010 RSI: 000055a119ac1000 RDI: ffffea000ae6ec00
[ 6609.365143] RBP: ffffea000ae6ec68 R08: 84000002b9bb1025 R09: 000055a119ab6000
[ 6609.367569] R10: ffff8881caa2ad80 R11: 0000000000000000 R12: ffff8881caa2ad80
[ 6609.370255] R13: ffffea000ae6ec00 R14: 000055a119ac1c9c R15: ffffc90002273dd8
[ 6609.373007] FS: 00007f08e467f740(0000) GS:ffff88a07c214000(0000) knlGS:0000000000000000
[ 6609.375999] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6609.377946] CR2: 000055a119ac1c9c CR3: 00000001adfd6005 CR4: 0000000000770eb0
[ 6609.380376] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6609.382853] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 6609.385216] PKRU: 55555554
[ 6609.386141] Call Trace:
[ 6609.387017] <TASK>
[ 6609.387718] ? ___pte_offset_map+0x1b/0x110
[ 6609.389056] __handle_mm_fault+0xa51/0xf00
[ 6609.390363] ? exc_page_fault+0x6a/0x140
[ 6609.391629] handle_mm_fault+0x13d/0x360
[ 6609.392856] do_user_addr_fault+0x2f2/0x7f0
[ 6609.394160] ? sigprocmask+0x77/0xa0
[ 6609.395375] exc_page_fault+0x6a/0x140
[ 6609.396735] asm_exc_page_fault+0x26/0x30
[ 6609.398224] RIP: 0033:0x55a1050bc18b
[ 6609.399567] Code: 8b 3f 4d 85 ff 74 40 41 39 5f 18 75 f2 49 8b 7f 08 44 38 27 75 e9 4c 89 c6 4c 89 45 c8 e8 bd 83 fa ff 4c 8b 45 c8 85 c0 75 d5 <41> 83 47 1c 01 48 83 c4 28 4c 89 f8 5b 4
1 5c 41 5d 41 5e 41 5f 5d
[ 6609.405971] RSP: 002b:00007ffcf5f37d90 EFLAGS: 00010246
[ 6609.407737] RAX: 0000000000000000 RBX: 00000000182768fa RCX: 0000000000000000
[ 6609.410151] RDX: 00000000000000fa RSI: 000055a105175c7b RDI: 000055a119ac1c60
[ 6609.412606] RBP: 00007ffcf5f37de0 R08: 000055a105175c7b R09: 0000000000000000
[ 6609.414998] R10: 000000004d2dfb5a R11: 0000000000000246 R12: 0000000000000050
[ 6609.417193] R13: 00000000000000fa R14: 000055a119abaf60 R15: 000055a119ac1c80
[ 6609.419268] </TASK>
[ 6609.419928] ---[ end trace 0000000000000000 ]---
The WARN_ON here is simply incorrect. The refcount here must be at least
the mapcount, not the opposite. Each mapcount must have a corresponding
refcount, but the refcount may increase if other components grab the
folio, which is acceptable. Meanwhile, having a mapcount larger than
refcount is a real problem.
So fix the WARN_ON condition.
Link: https://lkml.kernel.org/r/20250425074325.61833-1-ryncsn@gmail.com
Fixes: 1da190f4d0a6 ("mm: Copy-on-Write (COW) reuse support for PTE-mapped THP")
Signed-off-by: Kairui Song <kasong@tencent.com>
Reported-by: Kairui Song <kasong@tencent.com>
Closes: https://lore.kernel.org/all/CAMgjq7D+ea3eg9gRCVvRnto3Sv3_H3WVhupX4e=k8T5QAfBHbw@mail.gmail.com/
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Not intuitive, but vm_area_dup() located in kernel/fork.c is not only used
for duplicating VMAs during fork(), but also for duplicating VMAs when
splitting VMAs or when mremap()'ing them.
VM_PFNMAP mappings can at least get ordinarily mremap()'ed (no change in
size) and apparently also shrunk during mremap(), which implies
duplicating the VMA in __split_vma() first.
In case of ordinary mremap() (no change in size), we first duplicate the
VMA in copy_vma_and_data()->copy_vma() to then call untrack_pfn_clear() on
the old VMA: we effectively move the VM_PAT reservation. So the
untrack_pfn_clear() call on the new VMA duplicating is wrong in that
context.
Splitting of VMAs seems problematic, because we don't duplicate/adjust the
reservation when splitting the VMA. Instead, in memtype_erase() -- called
during zapping/munmap -- we shrink a reservation in case only the end
address matches: Assume we split a VMA into A and B, both would share a
reservation until B is unmapped.
So when unmapping B, the reservation would be updated to cover only A.
When unmapping A, we would properly remove the now-shrunk reservation.
That scenario describes the mremap() shrinking (old_size > new_size),
where we split + unmap B, and the untrack_pfn_clear() on the new VMA when
is wrong.
What if we manage to split a VM_PFNMAP VMA into A and B and unmap A first?
It would be broken because we would never free the reservation. Likely,
there are ways to trigger such a VMA split outside of mremap().
Affecting other VMA duplication was not intended, vm_area_dup() being used
outside of kernel/fork.c was an oversight. So let's fix that for; how to
handle VMA splits better should be investigated separately.
With a simple reproducer that uses mprotect() to split such a VMA I can
trigger
x86/PAT: pat_mremap:26448 freeing invalid memtype [mem 0x00000000-0x00000fff]
Link: https://lkml.kernel.org/r/20250422144942.2871395-1-david@redhat.com
Fixes: dc84bc2aba85 ("x86/mm/pat: Fix VM_PAT handling when fork() fails in copy_page_range()")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
During our testing with hugetlb subpool enabled, we observe that
hstate->resv_huge_pages may underflow into negative values. Root cause
analysis reveals a race condition in subpool reservation fallback handling
as follow:
hugetlb_reserve_pages()
/* Attempt subpool reservation */
gbl_reserve = hugepage_subpool_get_pages(spool, chg);
/* Global reservation may fail after subpool allocation */
if (hugetlb_acct_memory(h, gbl_reserve) < 0)
goto out_put_pages;
out_put_pages:
/* This incorrectly restores reservation to subpool */
hugepage_subpool_put_pages(spool, chg);
When hugetlb_acct_memory() fails after subpool allocation, the current
implementation over-commits subpool reservations by returning the full
'chg' value instead of the actual allocated 'gbl_reserve' amount. This
discrepancy propagates to global reservations during subsequent releases,
eventually causing resv_huge_pages underflow.
This problem can be trigger easily with the following steps:
1. reverse hugepage for hugeltb allocation
2. mount hugetlbfs with min_size to enable hugetlb subpool
3. alloc hugepages with two task(make sure the second will fail due to
insufficient amount of hugepages)
4. with for a few seconds and repeat step 3 which will make
hstate->resv_huge_pages to go below zero.
To fix this problem, return corrent amount of pages to subpool during the
fallback after hugepage_subpool_get_pages is called.
Link: https://lkml.kernel.org/r/20250410062633.3102457-1-mawupeng1@huawei.com
Fixes: 1c5ecae3a93f ("hugetlbfs: add minimum size accounting to subpools")
Signed-off-by: Wupeng Ma <mawupeng1@huawei.com>
Tested-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ma Wupeng <mawupeng1@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 ITS mitigation from Dave Hansen:
"Mitigate Indirect Target Selection (ITS) issue.
I'd describe this one as a good old CPU bug where the behavior is
_obviously_ wrong, but since it just results in bad predictions it
wasn't wrong enough to notice. Well, the researchers noticed and also
realized that thus bug undermined a bunch of existing indirect branch
mitigations.
Thus the unusually wide impact on this one. Details:
ITS is a bug in some Intel CPUs that affects indirect branches
including RETs in the first half of a cacheline. Due to ITS such
branches may get wrongly predicted to a target of (direct or indirect)
branch that is located in the second half of a cacheline. Researchers
at VUSec found this behavior and reported to Intel.
Affected processors:
- Cascade Lake, Cooper Lake, Whiskey Lake V, Coffee Lake R, Comet
Lake, Ice Lake, Tiger Lake and Rocket Lake.
Scope of impact:
- Guest/host isolation:
When eIBRS is used for guest/host isolation, the indirect branches
in the VMM may still be predicted with targets corresponding to
direct branches in the guest.
- Intra-mode using cBPF:
cBPF can be used to poison the branch history to exploit ITS.
Realigning the indirect branches and RETs mitigates this attack
vector.
- User/kernel:
With eIBRS enabled user/kernel isolation is *not* impacted by ITS.
- Indirect Branch Prediction Barrier (IBPB):
Due to this bug indirect branches may be predicted with targets
corresponding to direct branches which were executed prior to IBPB.
This will be fixed in the microcode.
Mitigation:
As indirect branches in the first half of cacheline are affected, the
mitigation is to replace those indirect branches with a call to thunk that
is aligned to the second half of the cacheline.
RETs that take prediction from RSB are not affected, but they may be
affected by RSB-underflow condition. So, RETs in the first half of
cacheline are also patched to a return thunk that executes the RET aligned
to second half of cacheline"
* tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftest/x86/bugs: Add selftests for ITS
x86/its: FineIBT-paranoid vs ITS
x86/its: Use dynamic thunks for indirect branches
x86/ibt: Keep IBT disabled during alternative patching
mm/execmem: Unify early execmem_cache behaviour
x86/its: Align RETs in BHB clear sequence to avoid thunking
x86/its: Add support for RSB stuffing mitigation
x86/its: Add "vmexit" option to skip mitigation on some CPUs
x86/its: Enable Indirect Target Selection mitigation
x86/its: Add support for ITS-safe return thunk
x86/its: Add support for ITS-safe indirect thunk
x86/its: Enumerate Indirect Target Selection (ITS) bug
Documentation: x86/bugs/its: Add ITS documentation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 IBTI mitigation from Dave Hansen:
"Mitigate Intra-mode Branch History Injection via classic BFP programs
This adds the branch history clearing mitigation to cBPF programs for
x86. Intra-mode BHI attacks via cBPF a.k.a IBTI-History was reported
by researchers at VUSec.
For hardware that doesn't support BHI_DIS_S, the recommended
mitigation is to run the short software sequence followed by the IBHF
instruction after cBPF execution. On hardware that does support
BHI_DIS_S, enable BHI_DIS_S and execute the IBHF after cBPF execution.
The Indirect Branch History Fence (IBHF) is a new instruction that
prevents indirect branch target predictions after the barrier from
using branch history from before the barrier while BHI_DIS_S is
enabled. On older systems this will map to a NOP. It is recommended to
add this fence at the end of the cBPF program to support VM migration.
This instruction is required on newer parts with BHI_NO to fully
mitigate against these attacks.
The current code disables the mitigation for anything running with the
SYS_ADMIN capability bit set. The intention was not to waste time
mitigating a process that has access to anything it wants anyway"
* tag 'ibti-hisory-for-linus-2025-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bhi: Do not set BHI_DIS_S in 32-bit mode
x86/bpf: Add IBHF call at end of classic BPF
x86/bpf: Call branch history clearing sequence on exit
|
|
|
|
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing
interrupts to be taken while TGE=0 and fixing an ugly bug on
AmpereOne that occurs when taking an interrupt while clearing the
xMO bits (AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized
by KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
RISC-V:
- Add missing reset of smstateen CSRs
x86:
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid
causing problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to
sanitize the VMCB as its state is undefined after SHUTDOWN,
emulating INIT is the least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a
stale root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB
page to print state, so that KVM doesn't print stale/wrong
information.
- When changing memory attributes (e.g. shared <=> private), add
potential hugepage ranges to the mmu_invalidate_range_{start,end}
set so that KVM doesn't create a shared/private hugepage when the
the corresponding attributes will become mixed (the attributes are
commited *after* KVM finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM
has at least one active VM. Effectively BP_SPEC_REDUCE when KVM is
loaded led to very measurable performance regressions for non-KVM
workloads"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Set/clear SRSO's BP_SPEC_REDUCE on 0 <=> 1 VM count transitions
KVM: arm64: Fix memory check in host_stage2_set_owner_locked()
KVM: arm64: Kill HCRX_HOST_FLAGS
KVM: arm64: Properly save/restore HCRX_EL2
KVM: arm64: selftest: Don't try to disable AArch64 support
KVM: arm64: Prevent userspace from disabling AArch64 support at any virtualisable EL
KVM: arm64: Force HCR_EL2.xMO to 1 at all times in VHE mode
KVM: arm64: Fix uninitialized memcache pointer in user_mem_abort()
KVM: x86/mmu: Prevent installing hugepages when mem attributes are changing
KVM: SVM: Update dump_ghcb() to use the GHCB snapshot fields
KVM: RISC-V: reset smstateen CSRs
KVM: x86/mmu: Check and free obsolete roots in kvm_mmu_reload()
KVM: x86: Check that the high 32bits are clear in kvm_arch_vcpu_ioctl_run()
KVM: SVM: Forcibly leave SMM mode on SHUTDOWN interception
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- Fix delayed timers
- Fix NULL pointer deref
- Fix wrong range check
* tag 'mips-fixes_6.15_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Fix MAX_REG_OFFSET
MIPS: CPS: Fix potential NULL pointer dereferences in cps_prepare_cpus()
MIPS: rename rollback_handler with skipover_handler
MIPS: Move r4k_wait() to .cpuidle.text section
MIPS: Fix idle VS timer enqueue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix a boot regression on very old x86 CPUs without CPUID support"
* tag 'x86-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Consolidate the loader enablement checking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc timers fixes from Ingo Molnar:
- Fix time keeping bugs in CLOCK_MONOTONIC_COARSE clocks
- Work around absolute relocations into vDSO code that GCC erroneously
emits in certain arm64 build environments
- Fix a false positive lockdep warning in the i8253 clocksource driver
* tag 'timers-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/i8253: Use raw_spinlock_irqsave() in clockevent_i8253_disable()
arm64: vdso: Work around invalid absolute relocations from GCC
timekeeping: Prevent coarse clocks going backwards
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell Precision
M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes
* tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
Input: xpad - fix two controller table values
Input: hisi_powerkey - enable system-wakeup for s2idle
Input: synaptics - enable InterTouch on Dell Precision M3800
Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5
Input: synaptics - enable InterTouch on Dynabook Portege X30L-G
Input: synaptics - enable InterTouch on Dynabook Portege X30-D
Input: synaptics - enable SMBus for HP Elitebook 850 G1
Input: mtk-pmic-keys - fix possible null pointer dereference
Input: xpad - add support for 8BitDo Ultimate 2 Wireless Controller
Input: cyttsp5 - fix power control issue on wakeup
MAINTAINERS: .mailmap: update Mattijs Korpershoek's email address
dt-bindings: mediatek,mt6779-keypad: Update Mattijs' email address
Input: stmpe-ts - use module alias instead of device table
Input: cyttsp5 - ensure minimum reset pulse width
Input: sparcspkr - avoid unannotated fall-through
input/joystick: magellan: Mark __nonstring look-up table
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
- Mark set_high_memory() as __init to fix section mismatch
- Accept memory allocated in memblock_double_array() to mitigate crash
of SNP guests
* tag 'fixes-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Accept allocated memory before use in memblock_double_array()
mm,mm_init: Mark set_high_memory as __init
|
|
s/devince/device/
It's used only internally, so no any behavior changes.
Fixes: 37e0e14128e0 ("ALSA: ump: Support UMP Endpoint and Function Block parsing")
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250511141147.10246-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The acpi_handle should be just a handle and not a pointer in
sdw_intel_acpi_scan() parameter list.
It is called with 'acpi_handle handle' as parameter and it is passing it to
acpi_walk_namespace, which also expects acpi_handle and not acpi_handle*
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20250508181207.22113-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When an event with UMP message is sent to a UMP client, the EP port
receives always no matter where the event is sent to, as it's a
catch-all port. OTOH, if an event is sent to EP port, and if the
event has a certain UMP Group, it should have been delivered to the
associated UMP Group port, too, but this was ignored, so far.
This patch addresses the behavior. Now a UMP event sent to the
Endpoint port will be delivered to the subscribers of the UMP group
port the event is associated with.
The patch also does a bit of refactoring to simplify the code about
__deliver_to_subscribers().
Fixes: 177ccf811df4 ("ALSA: seq: Support MIDI 2.0 UMP Endpoint port")
Link: https://patch.msgid.link/20250511134528.6314-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The GHCB_MSR_VMPL_REQ_LEVEL macro lacked parentheses around the bitmask
expression, causing the shift operation to bind too early. As a result,
when requesting VMPL1 (e.g., GHCB_MSR_VMPL_REQ_LEVEL(1)), incorrect
values such as 0x000000016 were generated instead of the intended
0x100000016 (the requested VMPL level is specified in GHCBData[39:32]).
Fix the precedence issue by grouping the masked value before applying
the shift.
[ bp: Massage commit message. ]
Fixes: 34ff65901735 ("x86/sev: Use kernel provided SVSM Calling Areas")
Signed-off-by: Seongman Lee <augustus92@kaist.ac.kr>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250511092329.12680-1-cloudlee1719@gmail.com
|
|
A recent commit put one entry in the wrong place. This just moves it to the
right place.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-5-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This adds support for several new controllers, all of which include
Share buttons:
- HORI Drum controller
- PowerA Fusion Pro 4
- 8BitDo Ultimate 3-mode Controller
- Hyperkin DuchesS Xbox One controller
- PowerA MOGA XP-Ultra controller
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-4-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The Share button, if present, is always one of two offsets from the end of the
file, depending on the presence of a specific interface. As we lack parsing for
the identify packet we can't automatically determine the presence of that
interface, but we can hardcode which of these offsets is correct for a given
controller.
More controllers are probably fixable by adding the MAP_SHARE_BUTTON in the
future, but for now I only added the ones that I have the ability to test
directly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-2-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Two controllers -- Mad Catz JOYTECH NEO SE Advanced and PDP Mirror's
Edge Official -- were missing the value of the mapping field, and thus
wouldn't detect properly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-1-vi@endrift.com
Fixes: 540602a43ae5 ("Input: xpad - add a few new VID/PID combinations")
Fixes: 3492321e2e60 ("Input: xpad - add multiple supported devices")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
To wake up the system from s2idle when pressing the power-button, let's
convert from using pm_wakeup_event() to pm_wakeup_dev_event(), as it allows
us to specify the "hard" in-parameter, which needs to be set for s2idle.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250306115021.797426-1-ulf.hansson@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"22 hotfixes. 13 are cc:stable and the remainder address post-6.14
issues or aren't considered necessary for -stable kernels.
About half are for MM. Five OCFS2 fixes and a few MAINTAINERS updates"
* tag 'mm-hotfixes-stable-2025-05-10-14-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mm: fix folio_pte_batch() on XEN PV
nilfs2: fix deadlock warnings caused by lock dependency in init_nilfs()
mm/hugetlb: copy the CMA flag when demoting
mm, swap: fix false warning for large allocation with !THP_SWAP
selftests/mm: fix a build failure on powerpc
selftests/mm: fix build break when compiling pkey_util.c
mm: vmalloc: support more granular vrealloc() sizing
tools/testing/selftests: fix guard region test tmpfs assumption
ocfs2: stop quota recovery before disabling quotas
ocfs2: implement handshaking with ocfs2 recovery thread
ocfs2: switch osb->disable_recovery to enum
mailmap: map Uwe's BayLibre addresses to a single one
MAINTAINERS: add mm THP section
mm/userfaultfd: fix uninitialized output field for -EAGAIN race
selftests/mm: compaction_test: support platform with huge mount of memory
MAINTAINERS: add core mm section
ocfs2: fix panic in failed foilio allocation
mm/huge_memory: fix dereferencing invalid pmd migration entry
MAINTAINERS: add reverse mapping section
x86: disable image size check for test builds
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core fix for a regression for platform devices
that is a regression from a change that went into 6.15-rc1 that
affected Pixel devices. It has been in linux-next for over a week with
no reported problems"
* tag 'driver-core-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
platform: Fix race condition during DMA configure at IOMMU probe time
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 6.15-rc6. Included in here
are:
- typec driver fixes
- usbtmc ioctl fixes
- xhci driver fixes
- cdnsp driver fixes
- some gadget driver fixes
Nothing really major, just all little stuff that people have reported
being issues. All of these have been in linux-next this week with no
reported issues"
* tag 'usb-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: dbc: Avoid event polling busyloop if pending rx transfers are inactive.
usb: xhci: Don't trust the EP Context cycle bit when moving HW dequeue
usb: usbtmc: Fix erroneous generic_read ioctl return
usb: usbtmc: Fix erroneous wait_srq ioctl return
usb: usbtmc: Fix erroneous get_stb ioctl error returns
usb: typec: tcpm: delay SNK_TRY_WAIT_DEBOUNCE to SRC_TRYWAIT transition
USB: usbtmc: use interruptible sleep in usbtmc_read
usb: cdnsp: fix L1 resume issue for RTL_REVISION_NEW_LPM version
usb: typec: ucsi: displayport: Fix NULL pointer access
usb: typec: ucsi: displayport: Fix deadlock
usb: misc: onboard_usb_dev: fix support for Cypress HX3 hubs
usb: uhci-platform: Make the clock really optional
usb: dwc3: gadget: Make gadget_wakeup asynchronous
usb: gadget: Use get_status callback to set remote wakeup capability
usb: gadget: f_ecm: Add get_status callback
usb: host: tegra: Prevent host controller crash when OTG port is used
usb: cdnsp: Fix issue with resuming from L1
usb: gadget: tegra-xudc: ACK ST_RC after clearing CTRL_RUN
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 6.15-rc6. These are:
- bcm2835-camera driver fix
- two axis-fifo driver fixes
All of these have been in linux-next for a few weeks with no reported
issues"
* tag 'staging-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: axis-fifo: Remove hardware resets for user errors
staging: axis-fifo: Correct handling of tx_fifo_depth for size validation
staging: bcm2835-camera: Initialise dev in v4l2_dev
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a bunch of small driver fixes (mostly all IIO) for 6.15-rc6.
Included in here are:
- loads of tiny IIO driver fixes for reported issues
- hyperv driver fix for a much-reported and worked on sysfs ring
buffer creation bug
All of these have been in linux-next for over a week (the IIO ones for
many weeks now), with no reported issues"
* tag 'char-misc-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
Drivers: hv: Make the sysfs node size for the ring buffer dynamic
uio_hv_generic: Fix sysfs creation path for ring buffer
iio: adis16201: Correct inclinometer channel resolution
iio: adc: ad7606: fix serial register access
iio: pressure: mprls0025pa: use aligned_s64 for timestamp
iio: imu: adis16550: align buffers for timestamp
staging: iio: adc: ad7816: Correct conditional logic for store mode
iio: adc: ad7266: Fix potential timestamp alignment issue.
iio: adc: ad7768-1: Fix insufficient alignment of timestamp.
iio: adc: dln2: Use aligned_s64 for timestamp
iio: accel: adxl355: Make timestamp 64-bit aligned using aligned_s64
iio: temp: maxim-thermocouple: Fix potential lack of DMA safe buffer.
iio: chemical: pms7003: use aligned_s64 for timestamp
iio: chemical: sps30: use aligned_s64 for timestamp
iio: imu: inv_mpu6050: align buffer for timestamp
iio: imu: st_lsm6dsx: Fix wakeup source leaks on device unbind
iio: adc: qcom-spmi-iadc: Fix wakeup source leaks on device unbind
iio: accel: fxls8962af: Fix wakeup source leaks on device unbind
iio: adc: ad7380: fix event threshold shift
iio: hid-sensor-prox: Fix incorrect OFFSET calculation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- omap: use correct function to read from device tree
- MAINTAINERS: remove Seth from ISMT maintainership
* tag 'i2c-for-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Remove entry for Seth Heasley
i2c: omap: fix deprecated of_property_read_bool() use
|