diff options
Diffstat (limited to 'drivers/net/ethernet/qualcomm/ppe/ppe_config.h')
| -rw-r--r-- | drivers/net/ethernet/qualcomm/ppe/ppe_config.h | 317 |
1 files changed, 317 insertions, 0 deletions
diff --git a/drivers/net/ethernet/qualcomm/ppe/ppe_config.h b/drivers/net/ethernet/qualcomm/ppe/ppe_config.h new file mode 100644 index 000000000000..4bb45ca40144 --- /dev/null +++ b/drivers/net/ethernet/qualcomm/ppe/ppe_config.h @@ -0,0 +1,317 @@ +/* SPDX-License-Identifier: GPL-2.0-only + * + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#ifndef __PPE_CONFIG_H__ +#define __PPE_CONFIG_H__ + +#include <linux/types.h> + +#include "ppe.h" + +/* There are different table index ranges for configuring queue base ID of + * the destination port, CPU code and service code. + */ +#define PPE_QUEUE_BASE_DEST_PORT 0 +#define PPE_QUEUE_BASE_CPU_CODE 1024 +#define PPE_QUEUE_BASE_SERVICE_CODE 2048 + +#define PPE_QUEUE_INTER_PRI_NUM 16 +#define PPE_QUEUE_HASH_NUM 256 + +/* The service code is used by EDMA port to transmit packet to PPE. */ +#define PPE_EDMA_SC_BYPASS_ID 1 + +/* The PPE RSS hash configured for IPv4 and IPv6 packet separately. */ +#define PPE_RSS_HASH_MODE_IPV4 BIT(0) +#define PPE_RSS_HASH_MODE_IPV6 BIT(1) +#define PPE_RSS_HASH_IP_LENGTH 4 +#define PPE_RSS_HASH_TUPLES 5 + +/* PPE supports 300 queues, each bit presents as one queue. */ +#define PPE_RING_TO_QUEUE_BITMAP_WORD_CNT 10 + +/** + * enum ppe_scheduler_frame_mode - PPE scheduler frame mode. + * @PPE_SCH_WITH_IPG_PREAMBLE_FRAME_CRC: The scheduled frame includes IPG, + * preamble, Ethernet packet and CRC. + * @PPE_SCH_WITH_FRAME_CRC: The scheduled frame includes Ethernet frame and CRC + * excluding IPG and preamble. + * @PPE_SCH_WITH_L3_PAYLOAD: The scheduled frame includes layer 3 packet data. + */ +enum ppe_scheduler_frame_mode { + PPE_SCH_WITH_IPG_PREAMBLE_FRAME_CRC = 0, + PPE_SCH_WITH_FRAME_CRC = 1, + PPE_SCH_WITH_L3_PAYLOAD = 2, +}; + +/** + * struct ppe_scheduler_cfg - PPE scheduler configuration. + * @flow_id: PPE flow ID. + * @pri: Scheduler priority. + * @drr_node_id: Node ID for scheduled traffic. + * @drr_node_wt: Weight for scheduled traffic. + * @unit_is_packet: Packet based or byte based unit for scheduled traffic. + * @frame_mode: Packet mode to be scheduled. + * + * PPE scheduler supports commit rate and exceed rate configurations. + */ +struct ppe_scheduler_cfg { + int flow_id; + int pri; + int drr_node_id; + int drr_node_wt; + bool unit_is_packet; + enum ppe_scheduler_frame_mode frame_mode; +}; + +/** + * enum ppe_resource_type - PPE resource type. + * @PPE_RES_UCAST: Unicast queue resource. + * @PPE_RES_MCAST: Multicast queue resource. + * @PPE_RES_L0_NODE: Level 0 for queue based node resource. + * @PPE_RES_L1_NODE: Level 1 for flow based node resource. + * @PPE_RES_FLOW_ID: Flow based node resource. + */ +enum ppe_resource_type { + PPE_RES_UCAST, + PPE_RES_MCAST, + PPE_RES_L0_NODE, + PPE_RES_L1_NODE, + PPE_RES_FLOW_ID, +}; + +/** + * struct ppe_queue_ucast_dest - PPE unicast queue destination. + * @src_profile: Source profile. + * @service_code_en: Enable service code to map the queue base ID. + * @service_code: Service code. + * @cpu_code_en: Enable CPU code to map the queue base ID. + * @cpu_code: CPU code. + * @dest_port: destination port. + * + * PPE egress queue ID is decided by the service code if enabled, otherwise + * by the CPU code if enabled, or by destination port if both service code + * and CPU code are disabled. + */ +struct ppe_queue_ucast_dest { + int src_profile; + bool service_code_en; + int service_code; + bool cpu_code_en; + int cpu_code; + int dest_port; +}; + +/* Hardware bitmaps for bypassing features of the ingress packet. */ +enum ppe_sc_ingress_type { + PPE_SC_BYPASS_INGRESS_VLAN_TAG_FMT_CHECK = 0, + PPE_SC_BYPASS_INGRESS_VLAN_MEMBER_CHECK = 1, + PPE_SC_BYPASS_INGRESS_VLAN_TRANSLATE = 2, + PPE_SC_BYPASS_INGRESS_MY_MAC_CHECK = 3, + PPE_SC_BYPASS_INGRESS_DIP_LOOKUP = 4, + PPE_SC_BYPASS_INGRESS_FLOW_LOOKUP = 5, + PPE_SC_BYPASS_INGRESS_FLOW_ACTION = 6, + PPE_SC_BYPASS_INGRESS_ACL = 7, + PPE_SC_BYPASS_INGRESS_FAKE_MAC_HEADER = 8, + PPE_SC_BYPASS_INGRESS_SERVICE_CODE = 9, + PPE_SC_BYPASS_INGRESS_WRONG_PKT_FMT_L2 = 10, + PPE_SC_BYPASS_INGRESS_WRONG_PKT_FMT_L3_IPV4 = 11, + PPE_SC_BYPASS_INGRESS_WRONG_PKT_FMT_L3_IPV6 = 12, + PPE_SC_BYPASS_INGRESS_WRONG_PKT_FMT_L4 = 13, + PPE_SC_BYPASS_INGRESS_FLOW_SERVICE_CODE = 14, + PPE_SC_BYPASS_INGRESS_ACL_SERVICE_CODE = 15, + PPE_SC_BYPASS_INGRESS_FAKE_L2_PROTO = 16, + PPE_SC_BYPASS_INGRESS_PPPOE_TERMINATION = 17, + PPE_SC_BYPASS_INGRESS_DEFAULT_VLAN = 18, + PPE_SC_BYPASS_INGRESS_DEFAULT_PCP = 19, + PPE_SC_BYPASS_INGRESS_VSI_ASSIGN = 20, + /* Values 21-23 are not specified by hardware. */ + PPE_SC_BYPASS_INGRESS_VLAN_ASSIGN_FAIL = 24, + PPE_SC_BYPASS_INGRESS_SOURCE_GUARD = 25, + PPE_SC_BYPASS_INGRESS_MRU_MTU_CHECK = 26, + PPE_SC_BYPASS_INGRESS_FLOW_SRC_CHECK = 27, + PPE_SC_BYPASS_INGRESS_FLOW_QOS = 28, + /* This must be last as it determines the size of the BITMAP. */ + PPE_SC_BYPASS_INGRESS_SIZE, +}; + +/* Hardware bitmaps for bypassing features of the egress packet. */ +enum ppe_sc_egress_type { + PPE_SC_BYPASS_EGRESS_VLAN_MEMBER_CHECK = 0, + PPE_SC_BYPASS_EGRESS_VLAN_TRANSLATE = 1, + PPE_SC_BYPASS_EGRESS_VLAN_TAG_FMT_CTRL = 2, + PPE_SC_BYPASS_EGRESS_FDB_LEARN = 3, + PPE_SC_BYPASS_EGRESS_FDB_REFRESH = 4, + PPE_SC_BYPASS_EGRESS_L2_SOURCE_SECURITY = 5, + PPE_SC_BYPASS_EGRESS_MANAGEMENT_FWD = 6, + PPE_SC_BYPASS_EGRESS_BRIDGING_FWD = 7, + PPE_SC_BYPASS_EGRESS_IN_STP_FLTR = 8, + PPE_SC_BYPASS_EGRESS_EG_STP_FLTR = 9, + PPE_SC_BYPASS_EGRESS_SOURCE_FLTR = 10, + PPE_SC_BYPASS_EGRESS_POLICER = 11, + PPE_SC_BYPASS_EGRESS_L2_PKT_EDIT = 12, + PPE_SC_BYPASS_EGRESS_L3_PKT_EDIT = 13, + PPE_SC_BYPASS_EGRESS_ACL_POST_ROUTING_CHECK = 14, + PPE_SC_BYPASS_EGRESS_PORT_ISOLATION = 15, + PPE_SC_BYPASS_EGRESS_PRE_ACL_QOS = 16, + PPE_SC_BYPASS_EGRESS_POST_ACL_QOS = 17, + PPE_SC_BYPASS_EGRESS_DSCP_QOS = 18, + PPE_SC_BYPASS_EGRESS_PCP_QOS = 19, + PPE_SC_BYPASS_EGRESS_PREHEADER_QOS = 20, + PPE_SC_BYPASS_EGRESS_FAKE_MAC_DROP = 21, + PPE_SC_BYPASS_EGRESS_TUNL_CONTEXT = 22, + PPE_SC_BYPASS_EGRESS_FLOW_POLICER = 23, + /* This must be last as it determines the size of the BITMAP. */ + PPE_SC_BYPASS_EGRESS_SIZE, +}; + +/* Hardware bitmaps for bypassing counter of packet. */ +enum ppe_sc_counter_type { + PPE_SC_BYPASS_COUNTER_RX_VLAN = 0, + PPE_SC_BYPASS_COUNTER_RX = 1, + PPE_SC_BYPASS_COUNTER_TX_VLAN = 2, + PPE_SC_BYPASS_COUNTER_TX = 3, + /* This must be last as it determines the size of the BITMAP. */ + PPE_SC_BYPASS_COUNTER_SIZE, +}; + +/* Hardware bitmaps for bypassing features of tunnel packet. */ +enum ppe_sc_tunnel_type { + PPE_SC_BYPASS_TUNNEL_SERVICE_CODE = 0, + PPE_SC_BYPASS_TUNNEL_TUNNEL_HANDLE = 1, + PPE_SC_BYPASS_TUNNEL_L3_IF_CHECK = 2, + PPE_SC_BYPASS_TUNNEL_VLAN_CHECK = 3, + PPE_SC_BYPASS_TUNNEL_DMAC_CHECK = 4, + PPE_SC_BYPASS_TUNNEL_UDP_CSUM_0_CHECK = 5, + PPE_SC_BYPASS_TUNNEL_TBL_DE_ACCE_CHECK = 6, + PPE_SC_BYPASS_TUNNEL_PPPOE_MC_TERM_CHECK = 7, + PPE_SC_BYPASS_TUNNEL_TTL_EXCEED_CHECK = 8, + PPE_SC_BYPASS_TUNNEL_MAP_SRC_CHECK = 9, + PPE_SC_BYPASS_TUNNEL_MAP_DST_CHECK = 10, + PPE_SC_BYPASS_TUNNEL_LPM_DST_LOOKUP = 11, + PPE_SC_BYPASS_TUNNEL_LPM_LOOKUP = 12, + PPE_SC_BYPASS_TUNNEL_WRONG_PKT_FMT_L2 = 13, + PPE_SC_BYPASS_TUNNEL_WRONG_PKT_FMT_L3_IPV4 = 14, + PPE_SC_BYPASS_TUNNEL_WRONG_PKT_FMT_L3_IPV6 = 15, + PPE_SC_BYPASS_TUNNEL_WRONG_PKT_FMT_L4 = 16, + PPE_SC_BYPASS_TUNNEL_WRONG_PKT_FMT_TUNNEL = 17, + /* Values 18-19 are not specified by hardware. */ + PPE_SC_BYPASS_TUNNEL_PRE_IPO = 20, + /* This must be last as it determines the size of the BITMAP. */ + PPE_SC_BYPASS_TUNNEL_SIZE, +}; + +/** + * struct ppe_sc_bypass - PPE service bypass bitmaps + * @ingress: Bitmap of features that can be bypassed on the ingress packet. + * @egress: Bitmap of features that can be bypassed on the egress packet. + * @counter: Bitmap of features that can be bypassed on the counter type. + * @tunnel: Bitmap of features that can be bypassed on the tunnel packet. + */ +struct ppe_sc_bypass { + DECLARE_BITMAP(ingress, PPE_SC_BYPASS_INGRESS_SIZE); + DECLARE_BITMAP(egress, PPE_SC_BYPASS_EGRESS_SIZE); + DECLARE_BITMAP(counter, PPE_SC_BYPASS_COUNTER_SIZE); + DECLARE_BITMAP(tunnel, PPE_SC_BYPASS_TUNNEL_SIZE); +}; + +/** + * struct ppe_sc_cfg - PPE service code configuration. + * @dest_port_valid: Generate destination port or not. + * @dest_port: Destination port ID. + * @bitmaps: Bitmap of bypass features. + * @is_src: Destination port acts as source port, packet sent to CPU. + * @next_service_code: New service code generated. + * @eip_field_update_bitmap: Fields updated as actions taken for EIP. + * @eip_hw_service: Selected hardware functions for EIP. + * @eip_offset_sel: Packet offset selection, using packet's layer 4 offset + * or using packet's layer 3 offset for EIP. + * + * Service code is generated during the packet passing through PPE. + */ +struct ppe_sc_cfg { + bool dest_port_valid; + int dest_port; + struct ppe_sc_bypass bitmaps; + bool is_src; + int next_service_code; + int eip_field_update_bitmap; + int eip_hw_service; + int eip_offset_sel; +}; + +/** + * enum ppe_action_type - PPE action of the received packet. + * @PPE_ACTION_FORWARD: Packet forwarded per L2/L3 process. + * @PPE_ACTION_DROP: Packet dropped by PPE. + * @PPE_ACTION_COPY_TO_CPU: Packet copied to CPU port per multicast queue. + * @PPE_ACTION_REDIRECT_TO_CPU: Packet redirected to CPU port per unicast queue. + */ +enum ppe_action_type { + PPE_ACTION_FORWARD = 0, + PPE_ACTION_DROP = 1, + PPE_ACTION_COPY_TO_CPU = 2, + PPE_ACTION_REDIRECT_TO_CPU = 3, +}; + +/** + * struct ppe_rss_hash_cfg - PPE RSS hash configuration. + * @hash_mask: Mask of the generated hash value. + * @hash_fragment_mode: Hash generation mode for the first fragment of TCP, + * UDP and UDP-Lite packets, to use either 3 tuple or 5 tuple for RSS hash + * key computation. + * @hash_seed: Seed to generate RSS hash. + * @hash_sip_mix: Source IP selection. + * @hash_dip_mix: Destination IP selection. + * @hash_protocol_mix: Protocol selection. + * @hash_sport_mix: Source L4 port selection. + * @hash_dport_mix: Destination L4 port selection. + * @hash_fin_inner: RSS hash value first selection. + * @hash_fin_outer: RSS hash value second selection. + * + * PPE RSS hash value is generated for the packet based on the RSS hash + * configured. + */ +struct ppe_rss_hash_cfg { + u32 hash_mask; + bool hash_fragment_mode; + u32 hash_seed; + u8 hash_sip_mix[PPE_RSS_HASH_IP_LENGTH]; + u8 hash_dip_mix[PPE_RSS_HASH_IP_LENGTH]; + u8 hash_protocol_mix; + u8 hash_sport_mix; + u8 hash_dport_mix; + u8 hash_fin_inner[PPE_RSS_HASH_TUPLES]; + u8 hash_fin_outer[PPE_RSS_HASH_TUPLES]; +}; + +int ppe_hw_config(struct ppe_device *ppe_dev); +int ppe_queue_scheduler_set(struct ppe_device *ppe_dev, + int node_id, bool flow_level, int port, + struct ppe_scheduler_cfg scheduler_cfg); +int ppe_queue_ucast_base_set(struct ppe_device *ppe_dev, + struct ppe_queue_ucast_dest queue_dst, + int queue_base, + int profile_id); +int ppe_queue_ucast_offset_pri_set(struct ppe_device *ppe_dev, + int profile_id, + int priority, + int queue_offset); +int ppe_queue_ucast_offset_hash_set(struct ppe_device *ppe_dev, + int profile_id, + int rss_hash, + int queue_offset); +int ppe_port_resource_get(struct ppe_device *ppe_dev, int port, + enum ppe_resource_type type, + int *res_start, int *res_end); +int ppe_sc_config_set(struct ppe_device *ppe_dev, int sc, + struct ppe_sc_cfg cfg); +int ppe_counter_enable_set(struct ppe_device *ppe_dev, int port); +int ppe_rss_hash_config_set(struct ppe_device *ppe_dev, int mode, + struct ppe_rss_hash_cfg hash_cfg); +int ppe_ring_queue_map_set(struct ppe_device *ppe_dev, + int ring_id, + u32 *queue_map); +#endif |