diff options
Diffstat (limited to 'drivers/net/dsa/b53/b53_common.c')
| -rw-r--r-- | drivers/net/dsa/b53/b53_common.c | 125 |
1 files changed, 84 insertions, 41 deletions
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index 9eb39cfa5fb2..dc2f4adac9bc 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -21,6 +21,8 @@ #include <linux/export.h> #include <linux/gpio.h> #include <linux/kernel.h> +#include <linux/math.h> +#include <linux/minmax.h> #include <linux/module.h> #include <linux/platform_data/b53.h> #include <linux/phy.h> @@ -326,6 +328,26 @@ static void b53_get_vlan_entry(struct b53_device *dev, u16 vid, } } +static void b53_set_eap_mode(struct b53_device *dev, int port, int mode) +{ + u64 eap_conf; + + if (is5325(dev) || is5365(dev) || dev->chip_id == BCM5389_DEVICE_ID) + return; + + b53_read64(dev, B53_EAP_PAGE, B53_PORT_EAP_CONF(port), &eap_conf); + + if (is63xx(dev)) { + eap_conf &= ~EAP_MODE_MASK_63XX; + eap_conf |= (u64)mode << EAP_MODE_SHIFT_63XX; + } else { + eap_conf &= ~EAP_MODE_MASK; + eap_conf |= (u64)mode << EAP_MODE_SHIFT; + } + + b53_write64(dev, B53_EAP_PAGE, B53_PORT_EAP_CONF(port), eap_conf); +} + static void b53_set_forwarding(struct b53_device *dev, int enable) { u8 mgmt; @@ -586,6 +608,13 @@ int b53_setup_port(struct dsa_switch *ds, int port) b53_port_set_mcast_flood(dev, port, true); b53_port_set_learning(dev, port, false); + /* Force all traffic to go to the CPU port to prevent the ASIC from + * trying to forward to bridged ports on matching FDB entries, then + * dropping frames because it isn't allowed to forward there. + */ + if (dsa_is_user_port(ds, port)) + b53_set_eap_mode(dev, port, EAP_MODE_SIMPLIFIED); + return 0; } EXPORT_SYMBOL(b53_setup_port); @@ -1175,6 +1204,10 @@ static int b53_setup(struct dsa_switch *ds) */ ds->untag_vlan_aware_bridge_pvid = true; + /* Ageing time is set in seconds */ + ds->ageing_time_min = 1 * 1000; + ds->ageing_time_max = AGE_TIME_MAX * 1000; + ret = b53_reset_switch(dev); if (ret) { dev_err(ds->dev, "failed to reset switch\n"); @@ -1290,41 +1323,17 @@ static void b53_adjust_63xx_rgmii(struct dsa_switch *ds, int port, phy_interface_t interface) { struct b53_device *dev = ds->priv; - u8 rgmii_ctrl = 0, off; - - if (port == dev->imp_port) - off = B53_RGMII_CTRL_IMP; - else - off = B53_RGMII_CTRL_P(port); + u8 rgmii_ctrl = 0; - b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl); - - switch (interface) { - case PHY_INTERFACE_MODE_RGMII_ID: - rgmii_ctrl |= (RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC); - break; - case PHY_INTERFACE_MODE_RGMII_RXID: - rgmii_ctrl &= ~(RGMII_CTRL_DLL_TXC); - rgmii_ctrl |= RGMII_CTRL_DLL_RXC; - break; - case PHY_INTERFACE_MODE_RGMII_TXID: - rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC); - rgmii_ctrl |= RGMII_CTRL_DLL_TXC; - break; - case PHY_INTERFACE_MODE_RGMII: - default: - rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC); - break; - } + b53_read8(dev, B53_CTRL_PAGE, B53_RGMII_CTRL_P(port), &rgmii_ctrl); + rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC); - if (port != dev->imp_port) { - if (is63268(dev)) - rgmii_ctrl |= RGMII_CTRL_MII_OVERRIDE; + if (is63268(dev)) + rgmii_ctrl |= RGMII_CTRL_MII_OVERRIDE; - rgmii_ctrl |= RGMII_CTRL_ENABLE_GMII; - } + rgmii_ctrl |= RGMII_CTRL_ENABLE_GMII; - b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl); + b53_write8(dev, B53_CTRL_PAGE, B53_RGMII_CTRL_P(port), rgmii_ctrl); dev_dbg(ds->dev, "Configured port %d for %s\n", port, phy_modes(interface)); @@ -1345,8 +1354,7 @@ static void b53_adjust_531x5_rgmii(struct dsa_switch *ds, int port, * tx_clk aligned timing (restoring to reset defaults) */ b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl); - rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC | - RGMII_CTRL_TIMING_SEL); + rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC); /* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make * sure that we enable the port TX clock internal delay to @@ -1366,7 +1374,10 @@ static void b53_adjust_531x5_rgmii(struct dsa_switch *ds, int port, rgmii_ctrl |= RGMII_CTRL_DLL_TXC; if (interface == PHY_INTERFACE_MODE_RGMII) rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC; - rgmii_ctrl |= RGMII_CTRL_TIMING_SEL; + + if (dev->chip_id != BCM53115_DEVICE_ID) + rgmii_ctrl |= RGMII_CTRL_TIMING_SEL; + b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl); dev_info(ds->dev, "Configured port %d for %s\n", port, @@ -1430,6 +1441,10 @@ static void b53_phylink_get_caps(struct dsa_switch *ds, int port, __set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_REVMII, config->supported_interfaces); + /* BCM63xx RGMII ports support RGMII */ + if (is63xx(dev) && in_range(port, B53_63XX_RGMII0, 4)) + phy_interface_set_rgmii(config->supported_interfaces); + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10 | MAC_100; @@ -1469,7 +1484,7 @@ static void b53_phylink_mac_config(struct phylink_config *config, struct b53_device *dev = ds->priv; int port = dp->index; - if (is63xx(dev) && port >= B53_63XX_RGMII0) + if (is63xx(dev) && in_range(port, B53_63XX_RGMII0, 4)) b53_adjust_63xx_rgmii(ds, port, interface); if (mode == MLO_AN_FIXED) { @@ -2019,9 +2034,6 @@ int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge, b53_get_vlan_entry(dev, pvid, vl); vl->members &= ~BIT(port); - if (vl->members == BIT(cpu_port)) - vl->members &= ~BIT(cpu_port); - vl->untag = vl->members; b53_set_vlan_entry(dev, pvid, vl); } @@ -2042,6 +2054,9 @@ int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge, pvlan |= BIT(i); } + /* Disable redirection of unknown SA to the CPU port */ + b53_set_eap_mode(dev, port, EAP_MODE_BASIC); + /* Configure the local port VLAN control membership to include * remote ports and update the local port bitmask */ @@ -2077,6 +2092,9 @@ void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge) pvlan &= ~BIT(i); } + /* Enable redirection of unknown SA to the CPU port */ + b53_set_eap_mode(dev, port, EAP_MODE_SIMPLIFIED); + b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan); dev->ports[port].vlan_ctl_mask = pvlan; @@ -2094,8 +2112,7 @@ void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge) } b53_get_vlan_entry(dev, pvid, vl); - vl->members |= BIT(port) | BIT(cpu_port); - vl->untag |= BIT(port) | BIT(cpu_port); + vl->members |= BIT(port); b53_set_vlan_entry(dev, pvid, vl); } } @@ -2315,6 +2332,9 @@ int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy) { int ret; + if (!b53_support_eee(ds, port)) + return 0; + ret = phy_init_eee(phy, false); if (ret) return 0; @@ -2329,7 +2349,7 @@ bool b53_support_eee(struct dsa_switch *ds, int port) { struct b53_device *dev = ds->priv; - return !is5325(dev) && !is5365(dev); + return !is5325(dev) && !is5365(dev) && !is63xx(dev); } EXPORT_SYMBOL(b53_support_eee); @@ -2373,6 +2393,28 @@ static int b53_get_max_mtu(struct dsa_switch *ds, int port) return B53_MAX_MTU; } +int b53_set_ageing_time(struct dsa_switch *ds, unsigned int msecs) +{ + struct b53_device *dev = ds->priv; + u32 atc; + int reg; + + if (is63xx(dev)) + reg = B53_AGING_TIME_CONTROL_63XX; + else + reg = B53_AGING_TIME_CONTROL; + + atc = DIV_ROUND_CLOSEST(msecs, 1000); + + if (!is5325(dev) && !is5365(dev)) + atc |= AGE_CHANGE; + + b53_write32(dev, B53_MGMT_PAGE, reg, atc); + + return 0; +} +EXPORT_SYMBOL_GPL(b53_set_ageing_time); + static const struct phylink_mac_ops b53_phylink_mac_ops = { .mac_select_pcs = b53_phylink_mac_select_pcs, .mac_config = b53_phylink_mac_config, @@ -2396,6 +2438,7 @@ static const struct dsa_switch_ops b53_switch_ops = { .port_disable = b53_disable_port, .support_eee = b53_support_eee, .set_mac_eee = b53_set_mac_eee, + .set_ageing_time = b53_set_ageing_time, .port_bridge_join = b53_br_join, .port_bridge_leave = b53_br_leave, .port_pre_bridge_flags = b53_br_flags_pre, |