summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses')
-rw-r--r--drivers/i2c/busses/Kconfig3
-rw-r--r--drivers/i2c/busses/i2c-designware-master.c9
-rw-r--r--drivers/i2c/busses/i2c-designware-platdrv.c15
-rw-r--r--drivers/i2c/busses/i2c-designware-slave.c9
-rw-r--r--drivers/i2c/busses/i2c-hix5hd2.c2
-rw-r--r--drivers/i2c/busses/i2c-i801.c3
-rw-r--r--drivers/i2c/busses/i2c-k1.c71
-rw-r--r--drivers/i2c/busses/i2c-mt65xx.c17
-rw-r--r--drivers/i2c/busses/i2c-qcom-geni.c8
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c1
-rw-r--r--drivers/i2c/busses/i2c-sprd.c2
-rw-r--r--drivers/i2c/busses/i2c-st.c2
-rw-r--r--drivers/i2c/busses/i2c-tegra.c26
-rw-r--r--drivers/i2c/busses/i2c-viperboard.c2
14 files changed, 115 insertions, 55 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 63a2b5a9abc3..ae8fcc864060 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -165,6 +165,7 @@ config I2C_I801
Birch Stream (SOC)
Arrow Lake (SOC)
Panther Lake (SOC)
+ Wildcat Lake (SOC)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
@@ -414,7 +415,7 @@ config I2C_ASPEED
config I2C_AT91
tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
- depends on ARCH_AT91 || COMPILE_TEST
+ depends on ARCH_MICROCHIP || COMPILE_TEST
help
This supports the use of the I2C interface on Atmel AT91
processors.
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index cbd88ffa5610..c7a72c28786c 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -1068,11 +1068,10 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev)
if (!(dev->flags & ACCESS_POLLING)) {
ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr,
irq_flags, dev_name(dev->dev), dev);
- if (ret) {
- dev_err(dev->dev, "failure requesting irq %i: %d\n",
- dev->irq, ret);
- return ret;
- }
+ if (ret)
+ return dev_err_probe(dev->dev, ret,
+ "failure requesting irq %i: %d\n",
+ dev->irq, ret);
}
ret = i2c_dw_init_recovery_info(dev);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index a35e4c64a1d4..34d881572351 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -238,7 +238,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
dev->rst = devm_reset_control_get_optional_exclusive(device, NULL);
if (IS_ERR(dev->rst))
- return PTR_ERR(dev->rst);
+ return dev_err_probe(device, PTR_ERR(dev->rst), "failed to acquire reset\n");
reset_control_deassert(dev->rst);
@@ -247,21 +247,23 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
goto exit_reset;
ret = i2c_dw_probe_lock_support(dev);
- if (ret)
+ if (ret) {
+ ret = dev_err_probe(device, ret, "failed to probe lock support\n");
goto exit_reset;
+ }
i2c_dw_configure(dev);
/* Optional interface clock */
dev->pclk = devm_clk_get_optional(device, "pclk");
if (IS_ERR(dev->pclk)) {
- ret = PTR_ERR(dev->pclk);
+ ret = dev_err_probe(device, PTR_ERR(dev->pclk), "failed to acquire pclk\n");
goto exit_reset;
}
dev->clk = devm_clk_get_optional(device, NULL);
if (IS_ERR(dev->clk)) {
- ret = PTR_ERR(dev->clk);
+ ret = dev_err_probe(device, PTR_ERR(dev->clk), "failed to acquire clock\n");
goto exit_reset;
}
@@ -314,6 +316,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
exit_probe:
dw_i2c_plat_pm_cleanup(dev);
+ i2c_dw_prepare_clk(dev, false);
exit_reset:
reset_control_assert(dev->rst);
return ret;
@@ -331,9 +334,11 @@ static void dw_i2c_plat_remove(struct platform_device *pdev)
i2c_dw_disable(dev);
pm_runtime_dont_use_autosuspend(device);
- pm_runtime_put_sync(device);
+ pm_runtime_put_noidle(device);
dw_i2c_plat_pm_cleanup(dev);
+ i2c_dw_prepare_clk(dev, false);
+
i2c_dw_remove_lock_support(dev);
reset_control_assert(dev->rst);
diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
index b936a240db0a..6eb16b7d75a6 100644
--- a/drivers/i2c/busses/i2c-designware-slave.c
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -266,11 +266,10 @@ int i2c_dw_probe_slave(struct dw_i2c_dev *dev)
ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr_slave,
IRQF_SHARED, dev_name(dev->dev), dev);
- if (ret) {
- dev_err(dev->dev, "failure requesting IRQ %i: %d\n",
- dev->irq, ret);
- return ret;
- }
+ if (ret)
+ return dev_err_probe(dev->dev, ret,
+ "failure requesting IRQ %i: %d\n",
+ dev->irq, ret);
ret = i2c_add_numbered_adapter(adap);
if (ret)
diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c
index 370f32974763..5358f5ddf924 100644
--- a/drivers/i2c/busses/i2c-hix5hd2.c
+++ b/drivers/i2c/busses/i2c-hix5hd2.c
@@ -339,7 +339,7 @@ static int hix5hd2_i2c_xfer_msg(struct hix5hd2_i2c_priv *priv,
ret = priv->state;
/*
- * If this is the last message to be transfered (stop == 1)
+ * If this is the last message to be transferred (stop == 1)
* Then check if the bus can be brought back to idle.
*/
if (priv->state == HIX5I2C_STAT_RW_SUCCESS && stop)
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index e94ac746a741..cba992fa6557 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -83,6 +83,7 @@
* Arrow Lake-H (SOC) 0x7722 32 hard yes yes yes
* Panther Lake-H (SOC) 0xe322 32 hard yes yes yes
* Panther Lake-P (SOC) 0xe422 32 hard yes yes yes
+ * Wildcat Lake-U (SOC) 0x4d22 32 hard yes yes yes
*
* Features supported by this driver:
* Software PEC no
@@ -236,6 +237,7 @@
#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
#define PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS 0x43a3
#define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS 0x4b23
+#define PCI_DEVICE_ID_INTEL_WILDCAT_LAKE_U_SMBUS 0x4d22
#define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS 0x4da3
#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS 0x51a3
#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_M_SMBUS 0x54a3
@@ -1056,6 +1058,7 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE_DATA(INTEL, ARROW_LAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
{ PCI_DEVICE_DATA(INTEL, PANTHER_LAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
{ PCI_DEVICE_DATA(INTEL, PANTHER_LAKE_P_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
+ { PCI_DEVICE_DATA(INTEL, WILDCAT_LAKE_U_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
{ 0, }
};
diff --git a/drivers/i2c/busses/i2c-k1.c b/drivers/i2c/busses/i2c-k1.c
index b68a21fff0b5..6b918770e612 100644
--- a/drivers/i2c/busses/i2c-k1.c
+++ b/drivers/i2c/busses/i2c-k1.c
@@ -3,6 +3,7 @@
* Copyright (C) 2024-2025 Troy Mitchell <troymitchell988@gmail.com>
*/
+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/i2c.h>
#include <linux/iopoll.h>
@@ -14,6 +15,7 @@
#define SPACEMIT_ICR 0x0 /* Control register */
#define SPACEMIT_ISR 0x4 /* Status register */
#define SPACEMIT_IDBR 0xc /* Data buffer register */
+#define SPACEMIT_IRCR 0x18 /* Reset cycle counter */
#define SPACEMIT_IBMR 0x1c /* Bus monitor register */
/* SPACEMIT_ICR register fields */
@@ -25,7 +27,8 @@
#define SPACEMIT_CR_MODE_FAST BIT(8) /* bus mode (master operation) */
/* Bit 9 is reserved */
#define SPACEMIT_CR_UR BIT(10) /* unit reset */
-/* Bits 11-12 are reserved */
+#define SPACEMIT_CR_RSTREQ BIT(11) /* i2c bus reset request */
+/* Bit 12 is reserved */
#define SPACEMIT_CR_SCLE BIT(13) /* master clock enable */
#define SPACEMIT_CR_IUE BIT(14) /* unit enable */
/* Bits 15-17 are reserved */
@@ -76,6 +79,10 @@
SPACEMIT_SR_GCAD | SPACEMIT_SR_IRF | SPACEMIT_SR_ITE | \
SPACEMIT_SR_ALD)
+#define SPACEMIT_RCR_SDA_GLITCH_NOFIX BIT(7) /* bypass the SDA glitch fix */
+/* the cycles of SCL during bus reset */
+#define SPACEMIT_RCR_FIELD_RST_CYC GENMASK(3, 0)
+
/* SPACEMIT_IBMR register fields */
#define SPACEMIT_BMR_SDA BIT(0) /* SDA line level */
#define SPACEMIT_BMR_SCL BIT(1) /* SCL line level */
@@ -88,6 +95,8 @@
#define SPACEMIT_SR_ERR (SPACEMIT_SR_BED | SPACEMIT_SR_RXOV | SPACEMIT_SR_ALD)
+#define SPACEMIT_BUS_RESET_CLK_CNT_MAX 9
+
enum spacemit_i2c_state {
SPACEMIT_STATE_IDLE,
SPACEMIT_STATE_START,
@@ -160,6 +169,7 @@ static int spacemit_i2c_handle_err(struct spacemit_i2c_dev *i2c)
static void spacemit_i2c_conditionally_reset_bus(struct spacemit_i2c_dev *i2c)
{
u32 status;
+ u8 clk_cnt;
/* if bus is locked, reset unit. 0: locked */
status = readl(i2c->base + SPACEMIT_IBMR);
@@ -169,9 +179,21 @@ static void spacemit_i2c_conditionally_reset_bus(struct spacemit_i2c_dev *i2c)
spacemit_i2c_reset(i2c);
usleep_range(10, 20);
- /* check scl status again */
+ for (clk_cnt = 0; clk_cnt < SPACEMIT_BUS_RESET_CLK_CNT_MAX; clk_cnt++) {
+ status = readl(i2c->base + SPACEMIT_IBMR);
+ if (status & SPACEMIT_BMR_SDA)
+ return;
+
+ /* There's nothing left to save here, we are about to exit */
+ writel(FIELD_PREP(SPACEMIT_RCR_FIELD_RST_CYC, 1),
+ i2c->base + SPACEMIT_IRCR);
+ writel(SPACEMIT_CR_RSTREQ, i2c->base + SPACEMIT_ICR);
+ usleep_range(20, 30);
+ }
+
+ /* check sda again here */
status = readl(i2c->base + SPACEMIT_IBMR);
- if (!(status & SPACEMIT_BMR_SCL))
+ if (!(status & SPACEMIT_BMR_SDA))
dev_warn_ratelimited(i2c->dev, "unit reset failed\n");
}
@@ -237,6 +259,14 @@ static void spacemit_i2c_init(struct spacemit_i2c_dev *i2c)
val |= SPACEMIT_CR_MSDE | SPACEMIT_CR_MSDIE;
writel(val, i2c->base + SPACEMIT_ICR);
+
+ /*
+ * The glitch fix in the K1 I2C controller introduces a delay
+ * on restart signals, so we disable the fix here.
+ */
+ val = readl(i2c->base + SPACEMIT_IRCR);
+ val |= SPACEMIT_RCR_SDA_GLITCH_NOFIX;
+ writel(val, i2c->base + SPACEMIT_IRCR);
}
static inline void
@@ -267,19 +297,6 @@ static void spacemit_i2c_start(struct spacemit_i2c_dev *i2c)
writel(val, i2c->base + SPACEMIT_ICR);
}
-static void spacemit_i2c_stop(struct spacemit_i2c_dev *i2c)
-{
- u32 val;
-
- val = readl(i2c->base + SPACEMIT_ICR);
- val |= SPACEMIT_CR_STOP | SPACEMIT_CR_ALDIE | SPACEMIT_CR_TB;
-
- if (i2c->read)
- val |= SPACEMIT_CR_ACKNAK;
-
- writel(val, i2c->base + SPACEMIT_ICR);
-}
-
static int spacemit_i2c_xfer_msg(struct spacemit_i2c_dev *i2c)
{
unsigned long time_left;
@@ -412,7 +429,6 @@ static irqreturn_t spacemit_i2c_irq_handler(int irq, void *devid)
val = readl(i2c->base + SPACEMIT_ICR);
val &= ~(SPACEMIT_CR_TB | SPACEMIT_CR_ACKNAK | SPACEMIT_CR_STOP | SPACEMIT_CR_START);
- writel(val, i2c->base + SPACEMIT_ICR);
switch (i2c->state) {
case SPACEMIT_STATE_START:
@@ -429,14 +445,16 @@ static irqreturn_t spacemit_i2c_irq_handler(int irq, void *devid)
}
if (i2c->state != SPACEMIT_STATE_IDLE) {
+ val |= SPACEMIT_CR_TB | SPACEMIT_CR_ALDIE;
+
if (spacemit_i2c_is_last_msg(i2c)) {
/* trigger next byte with stop */
- spacemit_i2c_stop(i2c);
- } else {
- /* trigger next byte */
- val |= SPACEMIT_CR_ALDIE | SPACEMIT_CR_TB;
- writel(val, i2c->base + SPACEMIT_ICR);
+ val |= SPACEMIT_CR_STOP;
+
+ if (i2c->read)
+ val |= SPACEMIT_CR_ACKNAK;
}
+ writel(val, i2c->base + SPACEMIT_ICR);
}
err_out:
@@ -476,12 +494,13 @@ static int spacemit_i2c_xfer(struct i2c_adapter *adapt, struct i2c_msg *msgs, in
spacemit_i2c_enable(i2c);
ret = spacemit_i2c_wait_bus_idle(i2c);
- if (!ret)
+ if (!ret) {
ret = spacemit_i2c_xfer_msg(i2c);
- else if (ret < 0)
- dev_dbg(i2c->dev, "i2c transfer error: %d\n", ret);
- else
+ if (ret < 0)
+ dev_dbg(i2c->dev, "i2c transfer error: %d\n", ret);
+ } else {
spacemit_i2c_check_bus_release(i2c);
+ }
spacemit_i2c_disable(i2c);
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index ab456c3717db..dee40704825c 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -1243,6 +1243,7 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap,
{
int ret;
int left_num = num;
+ bool write_then_read_en = false;
struct mtk_i2c *i2c = i2c_get_adapdata(adap);
ret = clk_bulk_enable(I2C_MT65XX_CLK_MAX, i2c->clocks);
@@ -1256,6 +1257,7 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap,
if (!(msgs[0].flags & I2C_M_RD) && (msgs[1].flags & I2C_M_RD) &&
msgs[0].addr == msgs[1].addr) {
i2c->auto_restart = 0;
+ write_then_read_en = true;
}
}
@@ -1280,12 +1282,10 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap,
else
i2c->op = I2C_MASTER_WR;
- if (!i2c->auto_restart) {
- if (num > 1) {
- /* combined two messages into one transaction */
- i2c->op = I2C_MASTER_WRRD;
- left_num--;
- }
+ if (write_then_read_en) {
+ /* combined two messages into one transaction */
+ i2c->op = I2C_MASTER_WRRD;
+ left_num--;
}
/* always use DMA mode. */
@@ -1293,7 +1293,10 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap,
if (ret < 0)
goto err_exit;
- msgs++;
+ if (i2c->op == I2C_MASTER_WRRD)
+ msgs += 2;
+ else
+ msgs++;
}
/* the return value is number of executed messages */
ret = num;
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index ff2289b52c84..95a577764d5c 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -870,7 +870,13 @@ static int geni_i2c_probe(struct platform_device *pdev)
goto err_clk;
}
proto = geni_se_read_proto(&gi2c->se);
- if (proto != GENI_SE_I2C) {
+ if (proto == GENI_SE_INVALID_PROTO) {
+ ret = geni_load_se_firmware(&gi2c->se, GENI_SE_I2C);
+ if (ret) {
+ dev_err_probe(dev, ret, "i2c firmware load failed ret: %d\n", ret);
+ goto err_resources;
+ }
+ } else if (proto != GENI_SE_I2C) {
ret = dev_err_probe(dev, -ENXIO, "Invalid proto %d\n", proto);
goto err_resources;
}
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index f4fa4703acbd..8138f5ef40f0 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -138,7 +138,6 @@ static void i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
#ifdef CONFIG_OF
static const struct of_device_id s3c24xx_i2c_match[] = {
- { .compatible = "samsung,s3c2410-i2c", .data = (void *)0 },
{ .compatible = "samsung,s3c2440-i2c", .data = (void *)QUIRK_S3C2440 },
{ .compatible = "samsung,s3c2440-hdmiphy-i2c",
.data = (void *)(QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO) },
diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c
index 56b2e5c5fb49..26ec34b19ad5 100644
--- a/drivers/i2c/busses/i2c-sprd.c
+++ b/drivers/i2c/busses/i2c-sprd.c
@@ -425,7 +425,7 @@ static irqreturn_t sprd_i2c_isr(int irq, void *dev_id)
* If we did not get one ACK from target when writing data, then we
* should finish this transmission since we got some errors.
*
- * When writing data, if i2c_tran == 0 which means we have writen
+ * When writing data, if i2c_tran == 0 which means we have written
* done all data, then we can finish this transmission.
*
* When reading data, if conut < rx fifo full threshold, which
diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
index bf28f8e3ee6b..97d70e667227 100644
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -152,7 +152,7 @@ struct st_i2c_timings {
/**
* struct st_i2c_client - client specific data
* @addr: 8-bit target addr, including r/w bit
- * @count: number of bytes to be transfered
+ * @count: number of bytes to be transferred
* @xfered: number of bytes already transferred
* @buf: data buffer
* @result: result of the transfer
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 4eb31b913c1a..e533460bccc3 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -1649,7 +1649,33 @@ static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
.has_interface_timing_reg = true,
};
+static const struct tegra_i2c_hw_feature tegra256_i2c_hw = {
+ .has_continue_xfer_support = true,
+ .has_per_pkt_xfer_complete_irq = true,
+ .clk_divisor_hs_mode = 7,
+ .clk_divisor_std_mode = 0x7a,
+ .clk_divisor_fast_mode = 0x40,
+ .clk_divisor_fast_plus_mode = 0x19,
+ .has_config_load_reg = true,
+ .has_multi_master_mode = true,
+ .has_slcg_override_reg = true,
+ .has_mst_fifo = true,
+ .has_mst_reset = true,
+ .quirks = &tegra194_i2c_quirks,
+ .supports_bus_clear = true,
+ .has_apb_dma = false,
+ .tlow_std_mode = 0x8,
+ .thigh_std_mode = 0x7,
+ .tlow_fast_fastplus_mode = 0x3,
+ .thigh_fast_fastplus_mode = 0x3,
+ .setup_hold_time_std_mode = 0x08080808,
+ .setup_hold_time_fast_fast_plus_mode = 0x02020202,
+ .setup_hold_time_hs_mode = 0x090909,
+ .has_interface_timing_reg = true,
+};
+
static const struct of_device_id tegra_i2c_of_match[] = {
+ { .compatible = "nvidia,tegra256-i2c", .data = &tegra256_i2c_hw, },
{ .compatible = "nvidia,tegra194-i2c", .data = &tegra194_i2c_hw, },
{ .compatible = "nvidia,tegra186-i2c", .data = &tegra186_i2c_hw, },
#if IS_ENABLED(CONFIG_ARCH_TEGRA_210_SOC)
diff --git a/drivers/i2c/busses/i2c-viperboard.c b/drivers/i2c/busses/i2c-viperboard.c
index 1bd602852e35..f596efcc291c 100644
--- a/drivers/i2c/busses/i2c-viperboard.c
+++ b/drivers/i2c/busses/i2c-viperboard.c
@@ -204,7 +204,7 @@ static int vprbrd_i2c_read(struct vprbrd *vb, struct i2c_msg *msg)
/* copy the received data */
memcpy(msg->buf + start, rmsg, len1);
- /* second read transfer if neccessary */
+ /* second read transfer if necessary */
if (len2 > 0) {
ret = vprbrd_i2c_receive(vb->usb_dev, rmsg, len2);
if (ret < 0)
generated by cgit v1.2.3 (git 2.46.0) at 2025-10-06 01:13:20 +0000