diff options
Diffstat (limited to 'drivers/dpll/zl3073x/regs.h')
| -rw-r--r-- | drivers/dpll/zl3073x/regs.h | 51 |
1 files changed, 51 insertions, 0 deletions
diff --git a/drivers/dpll/zl3073x/regs.h b/drivers/dpll/zl3073x/regs.h index 614e33128a5c..19a25325bd9c 100644 --- a/drivers/dpll/zl3073x/regs.h +++ b/drivers/dpll/zl3073x/regs.h @@ -72,6 +72,9 @@ #define ZL_REG_FW_VER ZL_REG(0, 0x05, 2) #define ZL_REG_CUSTOM_CONFIG_VER ZL_REG(0, 0x07, 4) +#define ZL_REG_RESET_STATUS ZL_REG(0, 0x18, 1) +#define ZL_REG_RESET_STATUS_RESET BIT(0) + /************************* * Register Page 2, Status *************************/ @@ -260,4 +263,52 @@ #define ZL_REG_OUTPUT_ESYNC_WIDTH ZL_REG(14, 0x18, 4) #define ZL_REG_OUTPUT_PHASE_COMP ZL_REG(14, 0x20, 4) +/* + * Register Page 255 - HW registers access + */ +#define ZL_REG_HWREG_OP ZL_REG(0xff, 0x00, 1) +#define ZL_HWREG_OP_WRITE 0x28 +#define ZL_HWREG_OP_READ 0x29 +#define ZL_HWREG_OP_PENDING BIT(1) + +#define ZL_REG_HWREG_ADDR ZL_REG(0xff, 0x04, 4) +#define ZL_REG_HWREG_WRITE_DATA ZL_REG(0xff, 0x08, 4) +#define ZL_REG_HWREG_READ_DATA ZL_REG(0xff, 0x0c, 4) + +/* + * Registers available in flash mode + */ +#define ZL_REG_FLASH_HASH ZL_REG(0, 0x78, 4) +#define ZL_REG_FLASH_FAMILY ZL_REG(0, 0x7c, 1) +#define ZL_REG_FLASH_RELEASE ZL_REG(0, 0x7d, 1) + +#define ZL_REG_HOST_CONTROL ZL_REG(1, 0x02, 1) +#define ZL_HOST_CONTROL_ENABLE BIT(0) + +#define ZL_REG_IMAGE_START_ADDR ZL_REG(1, 0x04, 4) +#define ZL_REG_IMAGE_SIZE ZL_REG(1, 0x08, 4) +#define ZL_REG_FLASH_INDEX_READ ZL_REG(1, 0x0c, 4) +#define ZL_REG_FLASH_INDEX_WRITE ZL_REG(1, 0x10, 4) +#define ZL_REG_FILL_PATTERN ZL_REG(1, 0x14, 4) + +#define ZL_REG_WRITE_FLASH ZL_REG(1, 0x18, 1) +#define ZL_WRITE_FLASH_OP GENMASK(2, 0) +#define ZL_WRITE_FLASH_OP_DONE 0x0 +#define ZL_WRITE_FLASH_OP_SECTORS 0x2 +#define ZL_WRITE_FLASH_OP_PAGE 0x3 +#define ZL_WRITE_FLASH_OP_COPY_PAGE 0x4 + +#define ZL_REG_FLASH_INFO ZL_REG(2, 0x00, 1) +#define ZL_FLASH_INFO_SECTOR_SIZE GENMASK(3, 0) +#define ZL_FLASH_INFO_SECTOR_4K 0 +#define ZL_FLASH_INFO_SECTOR_64K 1 + +#define ZL_REG_ERROR_COUNT ZL_REG(2, 0x04, 4) +#define ZL_REG_ERROR_CAUSE ZL_REG(2, 0x08, 4) + +#define ZL_REG_OP_STATE ZL_REG(2, 0x14, 1) +#define ZL_OP_STATE_NO_COMMAND 0 +#define ZL_OP_STATE_PENDING 1 +#define ZL_OP_STATE_DONE 2 + #endif /* _ZL3073X_REGS_H */ |