summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/qcom
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/qcom')
-rw-r--r--arch/arm/boot/dts/qcom/Makefile1
-rw-r--r--arch/arm/boot/dts/qcom/pm8921.dtsi6
-rw-r--r--arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts6
-rw-r--r--arch/arm/boot/dts/qcom/qcom-apq8064.dtsi9
-rw-r--r--arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi9
-rw-r--r--arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi25
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts2
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi40
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts5
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts361
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8960.dtsi32
-rw-r--r--arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts45
-rw-r--r--arch/arm/boot/dts/qcom/qcom-sdx55.dtsi9
13 files changed, 523 insertions, 27 deletions
diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
index e875b5d25e84..c7873dcef154 100644
--- a/arch/arm/boot/dts/qcom/Makefile
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -43,6 +43,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8926-samsung-matisselte.dtb \
qcom-msm8960-cdp.dtb \
qcom-msm8960-samsung-expressatt.dtb \
+ qcom-msm8960-sony-huashan.dtb \
qcom-msm8974-lge-nexus5-hammerhead.dtb \
qcom-msm8974-samsung-hlte.dtb \
qcom-msm8974-sony-xperia-rhine-amami.dtb \
diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi
index 058962af3005..535cb6a2543f 100644
--- a/arch/arm/boot/dts/qcom/pm8921.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8921.dtsi
@@ -17,6 +17,12 @@
pull-up;
};
+ pm8921_vibrator: vibrator@4a {
+ compatible = "qcom,pm8921-vib";
+ reg = <0x4a>;
+ status = "disabled";
+ };
+
pm8921_mpps: mpps@50 {
compatible = "qcom,pm8921-mpp",
"qcom,ssbi-mpp";
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts
index c187c6875bc6..fdbbc1389297 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts
@@ -34,7 +34,7 @@
#size-cells = <1>;
ranges;
- ramoops@88d00000{
+ ramoops@88d00000 {
compatible = "ramoops";
reg = <0x88d00000 0x100000>;
record-size = <0x20000>;
@@ -326,8 +326,8 @@
*/
pm8921_s4: s4 {
regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 17e506ca2438..09062b2ad8ba 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -342,6 +342,7 @@
intc: interrupt-controller@2000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <3>;
reg = <0x02000000 0x1000>,
<0x02002000 0x1000>;
@@ -1350,10 +1351,10 @@
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc PCIE_A_CLK>,
<&gcc PCIE_H_CLK>,
<&gcc PCIE_PHY_REF_CLK>;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index f77542fb3d4f..8eeaab1c0be1 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -175,6 +175,7 @@
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <3>;
reg = <0x0b000000 0x1000>,
<0x0b002000 0x1000>;
@@ -428,10 +429,10 @@
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_AHB_CLK>,
<&gcc GCC_PCIE_AXI_M_CLK>,
<&gcc GCC_PCIE_AXI_S_CLK>;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index 96e973501535..adedcc6da1da 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -527,6 +527,7 @@
intc: interrupt-controller@2000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <3>;
reg = <0x02000000 0x1000>,
<0x02002000 0x1000>;
@@ -1076,10 +1077,10 @@
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc PCIE_A_CLK>,
<&gcc PCIE_H_CLK>,
@@ -1137,10 +1138,10 @@
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc PCIE_1_A_CLK>,
<&gcc PCIE_1_H_CLK>,
@@ -1198,10 +1199,10 @@
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc PCIE_2_A_CLK>,
<&gcc PCIE_2_H_CLK>,
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
index 2ecc5983d365..08b50dc63923 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
@@ -144,6 +144,8 @@
pinctrl-0 = <&tsp_int_default>;
pinctrl-names = "default";
+
+ linux,keycodes = <KEY_APPSELECT KEY_BACK>;
};
};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi
index 4fa982771288..f18753e9f5ef 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi
@@ -18,4 +18,44 @@
bias-bus-hold;
};
};
+
+ sdcc3_default_state: sdcc3-default-state {
+ clk-pins {
+ pins = "sdc3_clk";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "sdc3_cmd";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "sdc3_data";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+
+ sdcc3_sleep_state: sdcc3-sleep-state {
+ clk-pins {
+ pins = "sdc3_clk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "sdc3_cmd";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "sdc3_data";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
index af6cc6393d74..49d117ea033a 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
@@ -71,6 +71,11 @@
&sdcc3 {
vmmc-supply = <&pm8921_l6>;
vqmmc-supply = <&pm8921_l7>;
+
+ pinctrl-0 = <&sdcc3_default_state>;
+ pinctrl-1 = <&sdcc3_sleep_state>;
+ pinctrl-names = "default", "sleep";
+
status = "okay";
};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts
new file mode 100644
index 000000000000..f2f59fc8b9b6
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2025, Antony Kurniawan Soemardi <linux@smankusors.com>
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+
+#include "qcom-msm8960.dtsi"
+#include "pm8921.dtsi"
+
+/ {
+ model = "Sony Xperia SP";
+ compatible = "sony,huashan", "qcom,msm8960t", "qcom,msm8960";
+ chassis-type = "handset";
+
+ aliases {
+ serial0 = &gsbi8_serial;
+ mmc0 = &sdcc1; /* SDCC1 eMMC slot */
+ mmc1 = &sdcc3; /* SDCC3 SD card slot */
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&pm8921_gpio 21 GPIO_ACTIVE_LOW>;
+ debounce-interval = <10>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ gpios = <&pm8921_gpio 20 GPIO_ACTIVE_LOW>;
+ debounce-interval = <10>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+};
+
+&gsbi8 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "okay";
+};
+
+&gsbi8_serial {
+ status = "okay";
+};
+
+&pm8921 {
+ interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921_gpio {
+ keypad_default_state: keypad-default-state {
+ keypad-sense-pins {
+ pins = "gpio1", "gpio2", "gpio3", "gpio4", "gpio5";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ bias-pull-up;
+ input-enable;
+ power-source = <PM8921_GPIO_S4>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_31P5>;
+ };
+
+ keypad-drive-pins {
+ pins = "gpio9", "gpio10";
+ function = PMIC_GPIO_FUNC_FUNC1;
+ bias-disable;
+ drive-open-drain;
+ output-low;
+ power-source = <PM8921_GPIO_S4>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ };
+ };
+};
+
+&pm8921_keypad {
+ linux,keymap = <
+ MATRIX_KEY(1, 0, KEY_CAMERA_FOCUS)
+ MATRIX_KEY(1, 1, KEY_CAMERA)
+ >;
+ keypad,num-rows = <2>;
+ keypad,num-columns = <5>;
+
+ pinctrl-0 = <&keypad_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&rpm {
+ regulators {
+ compatible = "qcom,rpm-pm8921-regulators";
+ vin_lvs1_3_6-supply = <&pm8921_s4>;
+ vin_lvs2-supply = <&pm8921_s4>;
+ vin_lvs4_5_7-supply = <&pm8921_s4>;
+ vdd_ncp-supply = <&pm8921_l6>;
+ vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+ vdd_l21_l23_l29-supply = <&pm8921_s8>;
+ vdd_l24-supply = <&pm8921_s1>;
+ vdd_l25-supply = <&pm8921_s1>;
+ vdd_l26-supply = <&pm8921_s7>;
+ vdd_l27-supply = <&pm8921_s7>;
+ vdd_l28-supply = <&pm8921_s7>;
+ vdd_l29-supply = <&pm8921_s8>;
+
+ /* Buck SMPS */
+ pm8921_s1: s1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ pm8921_s2: s2 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8921_s3: s3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <4800000>;
+ bias-pull-down;
+ };
+
+ pm8921_s4: s4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+ };
+
+ pm8921_s7: s7 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ pm8921_s8: s8 {
+ regulator-always-on;
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ /* PMOS LDO */
+ pm8921_l1: l1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ pm8921_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ pm8921_l3: l3 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ bias-pull-down;
+ };
+
+ pm8921_l4: l4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l5: l5 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l6: l6 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l7: l7 {
+ regulator-always-on;
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l8: l8 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ pm8921_l9: l9 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+
+ pm8921_l10: l10 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ pm8921_l11: l11 {
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ pm8921_l12: l12 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ pm8921_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l16: l16 {
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ pm8921_l17: l17 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ pm8921_l18: l18 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ pm8921_l21: l21 {
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+ bias-pull-down;
+ };
+
+ pm8921_l22: l22 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ bias-pull-down;
+ };
+
+ pm8921_l23: l23 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l24: l24 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1150000>;
+ bias-pull-down;
+ };
+
+ pm8921_l25: l25 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ bias-pull-down;
+ };
+
+ /* Low Voltage Switch */
+ pm8921_lvs1: lvs1 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs2: lvs2 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs3: lvs3 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs4: lvs4 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs5: lvs5 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs6: lvs6 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs7: lvs7 {
+ bias-pull-down;
+ };
+
+ pm8921_ncp: ncp {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ };
+ };
+};
+
+&sdcc1 {
+ vmmc-supply = <&pm8921_l5>;
+ status = "okay";
+};
+
+&sdcc3 {
+ vmmc-supply = <&pm8921_l6>;
+ vqmmc-supply = <&pm8921_l7>;
+
+ pinctrl-0 = <&sdcc3_default_state>;
+ pinctrl-1 = <&sdcc3_sleep_state>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+};
+
+&usb_hs1_phy {
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+};
+
+&usb1 {
+ dr_mode = "otg";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index 203f0b69b353..6e272d5345a8 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -322,6 +322,8 @@
syscon-tcsr = <&tcsr>;
+ status = "disabled";
+
gsbi5_serial: serial@16440000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16440000 0x1000>,
@@ -333,6 +335,34 @@
};
};
+ gsbi8: gsbi@1a000000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <8>;
+ reg = <0x1a000000 0x100>;
+ clocks = <&gcc GSBI8_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ syscon-tcsr = <&tcsr>;
+
+ status = "disabled";
+
+ gsbi8_serial: serial@1a040000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x1a040000 0x1000>,
+ <0x1a000000 0x1000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GSBI8_UART_CLK>,
+ <&gcc GSBI8_H_CLK>;
+ clock-names = "core",
+ "iface";
+
+ status = "disabled";
+ };
+ };
+
ssbi: ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
@@ -417,6 +447,8 @@
#size-cells = <1>;
ranges;
+ status = "disabled";
+
gsbi1_spi: spi@16080000 {
compatible = "qcom,spi-qup-v1.1.1";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts
index 903bb4d12513..b7a1367d3470 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts
@@ -50,6 +50,34 @@
};
};
+ i2c-touchkey {
+ compatible = "i2c-gpio";
+
+ sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ pinctrl-0 = <&i2c_touchkey_pins>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchkey@20 {
+ compatible = "cypress,midas-touchkey";
+ reg = <0x20>;
+
+ interrupts-extended = <&pm8941_gpios 29 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-0 = <&touchkey_pin>;
+ pinctrl-names = "default";
+
+ vcc-supply = <&pm8941_lvs3>;
+ vdd-supply = <&pm8941_l13>;
+
+ linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+ };
+ };
+
touch_ldo: regulator-touch {
compatible = "regulator-fixed";
regulator-name = "touch-ldo";
@@ -149,6 +177,14 @@
power-source = <PM8941_GPIO_S3>;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
};
+
+ touchkey_pin: touchkey-int-state {
+ pins = "gpio29";
+ function = "normal";
+ bias-disable;
+ input-enable;
+ power-source = <PM8941_GPIO_S3>;
+ };
};
&remoteproc_adsp {
@@ -332,6 +368,9 @@
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};
+
+ pm8941_lvs1: lvs1 {};
+ pm8941_lvs3: lvs3 {};
};
};
@@ -378,6 +417,12 @@
drive-strength = <8>;
bias-disable;
};
+
+ i2c_touchkey_pins: i2c-touchkey-state {
+ pins = "gpio95", "gpio96";
+ function = "gpio";
+ bias-pull-up;
+ };
};
&usb {
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index 20fdae9825e0..05b79281df57 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -340,10 +340,10 @@
"msi8";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_PIPE_CLK>,
<&gcc GCC_PCIE_AUX_CLK>,
@@ -707,6 +707,7 @@
compatible = "qcom,msm-qgic2";
interrupt-controller;
interrupt-parent = <&intc>;
+ #address-cells = <0>;
#interrupt-cells = <3>;
reg = <0x17800000 0x1000>,
<0x17802000 0x1000>;
generated by cgit v1.2.3 (git 2.46.0) at 2025-10-06 06:07:43 +0000