diff options
Diffstat (limited to 'Documentation/devicetree/bindings/input')
28 files changed, 677 insertions, 256 deletions
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml index c40799355ed7..d79b254f1cde 100644 --- a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml @@ -16,6 +16,7 @@ description: | allOf: - $ref: input.yaml# + - $ref: touchscreen/touchscreen.yaml# properties: compatible: @@ -95,7 +96,7 @@ required: - reg - interrupts -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/input/awinic,aw86927.yaml b/Documentation/devicetree/bindings/input/awinic,aw86927.yaml new file mode 100644 index 000000000000..b7252916bd72 --- /dev/null +++ b/Documentation/devicetree/bindings/input/awinic,aw86927.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/awinic,aw86927.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Awinic AW86927 LRA Haptic IC + +maintainers: + - Griffin Kroah-Hartman <griffin.kroah@fairphone.com> + +properties: + compatible: + const: awinic,aw86927 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - reset-gpios + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + vibrator@5a { + compatible = "awinic,aw86927"; + reg = <0x5a>; + interrupts-extended = <&tlmm 101 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/lpc32xx-key.txt b/Documentation/devicetree/bindings/input/lpc32xx-key.txt deleted file mode 100644 index 2b075a080d30..000000000000 --- a/Documentation/devicetree/bindings/input/lpc32xx-key.txt +++ /dev/null @@ -1,34 +0,0 @@ -NXP LPC32xx Key Scan Interface - -This binding is based on the matrix-keymap binding with the following -changes: - -Required Properties: -- compatible: Should be "nxp,lpc3220-key" -- reg: Physical base address of the controller and length of memory mapped - region. -- interrupts: The interrupt number to the cpu. -- clocks: phandle to clock controller plus clock-specifier pair -- nxp,debounce-delay-ms: Debounce delay in ms -- nxp,scan-delay-ms: Repeated scan period in ms -- linux,keymap: the key-code to be reported when the key is pressed - and released, see also - Documentation/devicetree/bindings/input/matrix-keymap.txt - -Note: keypad,num-rows and keypad,num-columns are required, and must be equal -since LPC32xx only supports square matrices - -Example: - - key@40050000 { - compatible = "nxp,lpc3220-key"; - reg = <0x40050000 0x1000>; - clocks = <&clk LPC32XX_CLK_KEY>; - interrupt-parent = <&sic1>; - interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; - keypad,num-rows = <1>; - keypad,num-columns = <1>; - nxp,debounce-delay-ms = <3>; - nxp,scan-delay-ms = <34>; - linux,keymap = <0x00000002>; - }; diff --git a/Documentation/devicetree/bindings/input/nxp,lpc3220-key.yaml b/Documentation/devicetree/bindings/input/nxp,lpc3220-key.yaml new file mode 100644 index 000000000000..9e0d977bdf5c --- /dev/null +++ b/Documentation/devicetree/bindings/input/nxp,lpc3220-key.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/nxp,lpc3220-key.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC32xx Key Scan Interface + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: nxp,lpc3220-key + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + nxp,debounce-delay-ms: + description: Debounce delay in ms + + nxp,scan-delay-ms: + description: Repeated scan period in ms + +required: + - compatible + - reg + - interrupts + - clocks + - nxp,debounce-delay-ms + - nxp,scan-delay-ms + - linux,keymap + +allOf: + - $ref: matrix-keymap.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/lpc32xx-clock.h> + + key@40050000 { + compatible = "nxp,lpc3220-key"; + reg = <0x40050000 0x1000>; + clocks = <&clk LPC32XX_CLK_KEY>; + interrupt-parent = <&sic1>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + keypad,num-rows = <1>; + keypad,num-columns = <1>; + nxp,debounce-delay-ms = <3>; + nxp,scan-delay-ms = <34>; + linux,keymap = <0x00000002>; + }; diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml index 62314a5fdce5..f978cf965a4d 100644 --- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml +++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml @@ -10,9 +10,6 @@ maintainers: - Courtney Cavin <courtney.cavin@sonymobile.com> - Vinod Koul <vkoul@kernel.org> -allOf: - - $ref: input.yaml# - properties: compatible: enum: @@ -25,23 +22,40 @@ properties: maxItems: 1 debounce: - description: | - Time in microseconds that key must be pressed or - released for state change interrupt to trigger. + description: + Time in microseconds that key must be pressed or released for state + change interrupt to trigger. $ref: /schemas/types.yaml#/definitions/uint32 bias-pull-up: - description: | - Presence of this property indicates that the KPDPWR_N - pin should be configured for pull up. + description: + Presence of this property indicates that the KPDPWR_N pin should be + configured for pull up. $ref: /schemas/types.yaml#/definitions/flag + wakeup-source: + description: + Button can wake-up the system. Only applicable for 'resin', 'pwrkey' + always wakes the system by default. + linux,code: - description: | - The input key-code associated with the power key. - Use the linux event codes defined in - include/dt-bindings/input/linux-event-codes.h - When property is omitted KEY_POWER is assumed. + description: + The input key-code associated with the power key. Use the linux event + codes defined in include/dt-bindings/input/linux-event-codes.h. + When property is omitted KEY_POWER is assumed. + +allOf: + - $ref: input.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8941-pwrkey + - qcom,pmk8350-pwrkey + then: + properties: + wakeup-source: false required: - compatible diff --git a/Documentation/devicetree/bindings/input/tca8418_keypad.txt b/Documentation/devicetree/bindings/input/tca8418_keypad.txt deleted file mode 100644 index 255185009167..000000000000 --- a/Documentation/devicetree/bindings/input/tca8418_keypad.txt +++ /dev/null @@ -1,10 +0,0 @@ -This binding is based on the matrix-keymap binding with the following -changes: - -keypad,num-rows and keypad,num-columns are required. - -Required properties: -- compatible: "ti,tca8418" -- reg: the I2C address -- interrupts: IRQ line number, should trigger on falling edge -- linux,keymap: Keys definitions, see keypad-matrix. diff --git a/Documentation/devicetree/bindings/input/ti,tca8418.yaml b/Documentation/devicetree/bindings/input/ti,tca8418.yaml new file mode 100644 index 000000000000..624a1830d0b0 --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,tca8418.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/ti,tca8418.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TCA8418 I2C/SMBus keypad scanner + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + enum: + - ti,tca8418 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: matrix-keymap.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + keypad@34 { + compatible = "ti,tca8418"; + reg = <0x34>; + interrupt-parent = <&gpio5>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + keypad,num-rows = <4>; + keypad,num-columns = <4>; + linux,keymap = < MATRIX_KEY(0x00, 0x01, BTN_0) + MATRIX_KEY(0x00, 0x00, BTN_1) + MATRIX_KEY(0x01, 0x01, BTN_2) + MATRIX_KEY(0x01, 0x00, BTN_3) + MATRIX_KEY(0x02, 0x00, BTN_4) + MATRIX_KEY(0x00, 0x03, BTN_5) + MATRIX_KEY(0x00, 0x02, BTN_6) + MATRIX_KEY(0x01, 0x03, BTN_7) + MATRIX_KEY(0x01, 0x02, BTN_8) + MATRIX_KEY(0x02, 0x02, BTN_9) + >; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt deleted file mode 100644 index da4c9d8b99b1..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt +++ /dev/null @@ -1,43 +0,0 @@ -* Rohm BU21013 Touch Screen - -Required properties: - - compatible : "rohm,bu21013_tp" - - reg : I2C device address - - reset-gpios : GPIO pin enabling (selecting) chip (CS) - - interrupt-parent : the phandle for the gpio controller - - interrupts : (gpio) interrupt to which the chip is connected - -Optional properties: - - touch-gpios : GPIO pin registering a touch event - - <supply_name>-supply : Phandle to a regulator supply - - touchscreen-size-x : General touchscreen binding, see [1]. - - touchscreen-size-y : General touchscreen binding, see [1]. - - touchscreen-inverted-x : General touchscreen binding, see [1]. - - touchscreen-inverted-y : General touchscreen binding, see [1]. - - touchscreen-swapped-x-y : General touchscreen binding, see [1]. - -[1] All general touchscreen properties are described in - Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt. - -Deprecated properties: - - rohm,touch-max-x : Maximum outward permitted limit in the X axis - - rohm,touch-max-y : Maximum outward permitted limit in the Y axis - - rohm,flip-x : Flip touch coordinates on the X axis - - rohm,flip-y : Flip touch coordinates on the Y axis - -Example: - - i2c@80110000 { - bu21013_tp@5c { - compatible = "rohm,bu21013_tp"; - reg = <0x5c>; - interrupt-parent = <&gpio2>; - interrupts <&20 IRQ_TYPE_LEVEL_LOW>; - touch-gpio = <&gpio2 20 GPIO_ACTIVE_LOW>; - avdd-supply = <&ab8500_ldo_aux1_reg>; - - touchscreen-size-x = <384>; - touchscreen-size-y = <704>; - touchscreen-inverted-y; - }; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml b/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml index 1c7ae05a8c15..930c70104b3f 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml @@ -9,27 +9,35 @@ title: EETI EXC3000 series touchscreen controller maintainers: - Dmitry Torokhov <dmitry.torokhov@gmail.com> -allOf: - - $ref: touchscreen.yaml# - properties: compatible: oneOf: - const: eeti,exc3000 - const: eeti,exc80h60 - const: eeti,exc80h84 + - const: eeti,egalax_ts # Do NOT use for new binding + - const: eeti,exc3000-i2c + deprecated: true - items: - enum: - eeti,exc81w32 - const: eeti,exc80h84 reg: - const: 0x2a + enum: [0x4, 0xa, 0x2a] interrupts: maxItems: 1 reset-gpios: maxItems: 1 + wakeup-gpios: + maxItems: 1 vdd-supply: description: Power supply regulator for the chip + attn-gpios: + deprecated: true + maxItems: 1 + description: Phandle to a GPIO to check whether interrupt is still + latched. This is necessary for platforms that lack + support for level-triggered IRQs. touchscreen-size-x: true touchscreen-size-y: true touchscreen-inverted-x: true @@ -40,11 +48,33 @@ required: - compatible - reg - interrupts - - touchscreen-size-x - - touchscreen-size-y additionalProperties: false +allOf: + - $ref: touchscreen.yaml# + + - if: + properties: + compatible: + not: + contains: + enum: + - eeti,egalax_ts + - eeti,exc3000-i2c + then: + properties: + reg: + const: 0x2a + + wakeup-gpios: false + + attn-gpios: false + + required: + - touchscreen-size-x + - touchscreen-size-y + examples: - | #include "dt-bindings/interrupt-controller/irq.h" diff --git a/Documentation/devicetree/bindings/input/touchscreen/eeti.txt b/Documentation/devicetree/bindings/input/touchscreen/eeti.txt deleted file mode 100644 index 32b3712c916e..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/eeti.txt +++ /dev/null @@ -1,30 +0,0 @@ -Bindings for EETI touchscreen controller - -Required properties: -- compatible: should be "eeti,exc3000-i2c" -- reg: I2C address of the chip. Should be set to <0xa> -- interrupts: interrupt to which the chip is connected - -Optional properties: -- attn-gpios: A handle to a GPIO to check whether interrupt is still - latched. This is necessary for platforms that lack - support for level-triggered IRQs. - -The following optional properties described in touchscreen.txt are -also supported: - -- touchscreen-inverted-x -- touchscreen-inverted-y -- touchscreen-swapped-x-y - -Example: - -i2c-master { - touchscreen@a { - compatible = "eeti,exc3000-i2c"; - reg = <0xa>; - interrupt-parent = <&gpio>; - interrupts = <123 IRQ_TYPE_EDGE_RISING>; - attn-gpios = <&gpio 123 GPIO_ACTIVE_HIGH>; - }; -}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt deleted file mode 100644 index ebbe93810574..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt +++ /dev/null @@ -1,18 +0,0 @@ -* EETI eGalax Multiple Touch Controller - -Required properties: -- compatible: must be "eeti,egalax_ts" -- reg: i2c slave address -- interrupts: touch controller interrupt -- wakeup-gpios: the gpio pin to be used for waking up the controller - and also used as irq pin - -Example: - - touchscreen@4 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - interrupt-parent = <&gpio1>; - interrupts = <9 IRQ_TYPE_LEVEL_LOW>; - wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml b/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml index 678756ad0f92..a99280aefcbe 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml @@ -62,6 +62,20 @@ properties: description: Number of data samples which are averaged for each read. enum: [ 1, 4, 8, 16, 32 ] + debounce-delay-us: + description: | + Minimum duration in microseconds a signal must remain stable + to be considered valid. + + Drivers must convert this value to IPG clock cycles and map + it to one of the four discrete thresholds exposed by the + TSC_DEBUG_MODE2 register: + + 0: 8191 IPG cycles + 1: 4095 IPG cycles + 2: 2047 IPG cycles + 3: 1023 IPG cycles + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml index eb4992f708b7..a96137c6f063 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml @@ -62,7 +62,6 @@ additionalProperties: false required: - compatible - reg - - interrupts examples: - | diff --git a/Documentation/devicetree/bindings/input/touchscreen/himax,hx852es.yaml b/Documentation/devicetree/bindings/input/touchscreen/himax,hx852es.yaml new file mode 100644 index 000000000000..40a60880111d --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/himax,hx852es.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/himax,hx852es.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Himax HX852x(ES) touch panel controller + +maintainers: + - Stephan Gerhold <stephan@gerhold.net> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + items: + - enum: + - himax,hx8525e + - himax,hx8526e + - himax,hx8527e + - const: himax,hx852es + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: Touch Screen Interrupt (TSIX), active low + + reset-gpios: + maxItems: 1 + description: External Reset (XRES), active low + + vcca-supply: + description: Analog power supply (VCCA) + + vccd-supply: + description: Digital power supply (VCCD) + + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-swapped-x-y: true + + linux,keycodes: + minItems: 1 + maxItems: 4 + +required: + - compatible + - reg + - interrupts + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/input/input.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@48 { + compatible = "himax,hx8527e", "himax,hx852es"; + reg = <0x48>; + interrupt-parent = <&tlmm>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; + vcca-supply = <®_ts_vcca>; + vccd-supply = <&pm8916_l6>; + linux,keycodes = <KEY_BACK KEY_HOMEPAGE KEY_APPSELECT>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/hynitron,cst816x.yaml b/Documentation/devicetree/bindings/input/touchscreen/hynitron,cst816x.yaml new file mode 100644 index 000000000000..72d4da636881 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/hynitron,cst816x.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/hynitron,cst816x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hynitron CST816x Series Capacitive Touch controller + +maintainers: + - Oleh Kuzhylnyi <kuzhylol@gmail.com> + +description: | + Bindings for CST816x high performance self-capacitance touch chip series + with single point gesture and real two-point operation. + +properties: + compatible: + enum: + - hynitron,cst816s + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + linux,keycodes: + minItems: 1 + items: + - description: Slide up gesture + - description: Slide down gesture + - description: Slide left gesture + - description: Slide right gesture + - description: Long press gesture + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/input/linux-event-codes.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@15 { + compatible = "hynitron,cst816s"; + reg = <0x15>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + linux,keycodes = <KEY_UP>, <KEY_DOWN>, <KEY_LEFT>, <KEY_RIGHT>, + <BTN_TOOL_TRIPLETAP>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml index bd8ede3a4ad8..0ef79343bf9a 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml @@ -35,6 +35,7 @@ properties: linux,keycodes: description: Keycodes for the touch keys + minItems: 2 maxItems: 5 touchscreen-size-x: true @@ -87,5 +88,22 @@ examples: touchscreen-inverted-y; }; }; + - | + #include <dt-bindings/input/linux-event-codes.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@50 { + compatible = "imagis,ist3032c"; + reg = <0x50>; + interrupt-parent = <&gpio>; + interrupts = <72 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&ldo2>; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + linux,keycodes = <KEY_APPSELECT>, <KEY_BACK>; + }; + }; ... diff --git a/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt deleted file mode 100644 index 05e982c3454e..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt +++ /dev/null @@ -1,17 +0,0 @@ -* MAXI MAX11801 Resistive touch screen controller with i2c interface - -Required properties: -- compatible: must be "maxim,max11801" -- reg: i2c slave address -- interrupts: touch controller interrupt - -Example: - -&i2c1 { - max11801: touchscreen@48 { - compatible = "maxim,max11801"; - reg = <0x48>; - interrupt-parent = <&gpio3>; - interrupts = <31 IRQ_TYPE_EDGE_FALLING>; - }; -}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/maxim,max11801.yaml b/Documentation/devicetree/bindings/input/touchscreen/maxim,max11801.yaml new file mode 100644 index 000000000000..4f528d220199 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/maxim,max11801.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/maxim,max11801.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAXI MAX11801 Resistive touch screen controller with i2c interface + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: maxim,max11801 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +allOf: + - $ref: touchscreen.yaml + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@48 { + compatible = "maxim,max11801"; + reg = <0x48>; + interrupt-parent = <&gpio3>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/raspberrypi,firmware-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/raspberrypi,firmware-ts.txt deleted file mode 100644 index 2a1af240ccc3..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/raspberrypi,firmware-ts.txt +++ /dev/null @@ -1,26 +0,0 @@ -Raspberry Pi firmware based 7" touchscreen -===================================== - -Required properties: - - compatible: "raspberrypi,firmware-ts" - -Optional properties: - - firmware: Reference to RPi's firmware device node - - touchscreen-size-x: See touchscreen.txt - - touchscreen-size-y: See touchscreen.txt - - touchscreen-inverted-x: See touchscreen.txt - - touchscreen-inverted-y: See touchscreen.txt - - touchscreen-swapped-x-y: See touchscreen.txt - -Example: - -firmware: firmware-rpi { - compatible = "raspberrypi,bcm2835-firmware"; - mboxes = <&mailbox>; - - ts: touchscreen { - compatible = "raspberrypi,firmware-ts"; - touchscreen-size-x = <800>; - touchscreen-size-y = <480>; - }; -}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml index 7fc22a403d48..059d419f6c1c 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml @@ -55,7 +55,7 @@ properties: touchscreen-min-pressure: true touchscreen-x-plate-ohms: true -additionalProperties: false +unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/input/touchscreen/rohm,bu21013.yaml b/Documentation/devicetree/bindings/input/touchscreen/rohm,bu21013.yaml new file mode 100644 index 000000000000..adea2c4edf1f --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/rohm,bu21013.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/rohm,bu21013.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rohm BU21013 touchscreen + +description: + Rohm BU21013 I2C driven touchscreen controller. + +maintainers: + - Dario Binacchi <dario.binacchi@amarulasolutions.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - rohm,bu21013_tp + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + touch-gpios: + maxItems: 1 + description: GPIO registering a touch event. + + avdd-supply: + description: Analogic power supply + + rohm,touch-max-x: + deprecated: true + description: Maximum value on the X axis. + $ref: /schemas/types.yaml#/definitions/uint32 + + rohm,touch-max-y: + deprecated: true + description: Maximum value on the Y axis. + $ref: /schemas/types.yaml#/definitions/uint32 + + rohm,flip-x: + deprecated: true + description: Flip touch coordinates on the X axis + type: boolean + + rohm,flip-y: + deprecated: true + description: Flip touch coordinates on the Y axis + type: boolean + + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-swapped-x-y: true + +additionalProperties: false + +required: + - compatible + - reg + - reset-gpios + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@5c { + compatible = "rohm,bu21013_tp"; + reg = <0x5c>; + + interrupt-parent = <&gpio2>; + interrupts = <0x20 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; + touch-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + avdd-supply = <&ab8500_ldo_aux1_reg>; + + touchscreen-size-x = <384>; + touchscreen-size-y = <704>; + touchscreen-inverted-y; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/semtech,sx8654.yaml b/Documentation/devicetree/bindings/input/touchscreen/semtech,sx8654.yaml new file mode 100644 index 000000000000..b2554064b688 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/semtech,sx8654.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/semtech,sx8654.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Semtech SX8654 I2C Touchscreen Controller + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + enum: + - semtech,sx8650 + - semtech,sx8654 + - semtech,sx8655 + - semtech,sx8656 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@48 { + compatible = "semtech,sx8654"; + reg = <0x48>; + interrupt-parent = <&gpio6>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt deleted file mode 100644 index 0ebe6dd043c7..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt +++ /dev/null @@ -1,23 +0,0 @@ -* Semtech SX8654 I2C Touchscreen Controller - -Required properties: -- compatible: must be one of the following, depending on the model: - "semtech,sx8650" - "semtech,sx8654" - "semtech,sx8655" - "semtech,sx8656" -- reg: i2c slave address -- interrupts: touch controller interrupt - -Optional properties: - - reset-gpios: GPIO specification for the NRST input - -Example: - - sx8654@48 { - compatible = "semtech,sx8654"; - reg = <0x48>; - interrupt-parent = <&gpio6>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti.tsc2007.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2007.yaml index 8bb4bc7df4fa..a595df3ea802 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/ti.tsc2007.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2007.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/input/touchscreen/ti.tsc2007.yaml# +$id: http://devicetree.org/schemas/input/touchscreen/ti,tsc2007.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments tsc2007 touchscreen controller @@ -26,6 +26,8 @@ properties: pendown-gpio: true + wakeup-source: true + ti,max-rt: $ref: /schemas/types.yaml#/definitions/uint32 description: maximum pressure. diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt deleted file mode 100644 index e1adb902d503..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt +++ /dev/null @@ -1 +0,0 @@ -See touchscreen.yaml diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml index 3e3572aa483a..7023e8c73a7b 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml @@ -206,6 +206,10 @@ properties: unevaluatedProperties: false + debounce-delay-us: + description: Minimum duration in microseconds a signal must remain stable + to be considered valid. + dependencies: touchscreen-size-x: [ touchscreen-size-y ] touchscreen-size-y: [ touchscreen-size-x ] diff --git a/Documentation/devicetree/bindings/input/touchscreen/zeitec,zet6223.yaml b/Documentation/devicetree/bindings/input/touchscreen/zeitec,zet6223.yaml new file mode 100644 index 000000000000..d5e132ec0273 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/zeitec,zet6223.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/zeitec,zet6223.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Zeitec ZET6223 touchscreen controller + +description: + Zeitec ZET6223 I2C driven touchscreen controller. + +maintainers: + - Dario Binacchi <dario.binacchi@amarulasolutions.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - zeitec,zet6223 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vio-supply: + description: 1.8V or 3.3V VIO supply. + + vcc-supply: + description: 3.3V VCC supply. + + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-swapped-x-y: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@76 { + compatible = "zeitec,zet6223"; + reg = <0x76>; + interrupt-parent = <&pio>; + interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt b/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt deleted file mode 100644 index 27d55a506f18..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt +++ /dev/null @@ -1,30 +0,0 @@ -Zeitec ZET6223 I2C touchscreen controller - -Required properties: -- compatible : "zeitec,zet6223" -- reg : I2C slave address of the chip (0x76) -- interrupts : interrupt specification for the zet6223 interrupt - -Optional properties: - -- vio-supply : Specification for VIO supply (1.8V or 3.3V, - depending on system interface needs). -- vcc-supply : Specification for 3.3V VCC supply. -- touchscreen-size-x : See touchscreen.txt -- touchscreen-size-y : See touchscreen.txt -- touchscreen-inverted-x : See touchscreen.txt -- touchscreen-inverted-y : See touchscreen.txt -- touchscreen-swapped-x-y : See touchscreen.txt - -Example: - -i2c@00000000 { - - zet6223: touchscreen@76 { - compatible = "zeitec,zet6223"; - reg = <0x76>; - interrupt-parent = <&pio>; - interrupts = <6 11 IRQ_TYPE_EDGE_FALLING> - }; - -}; |