diff options
| -rw-r--r-- | net/ipv4/route.c | 13 | ||||
| -rwxr-xr-x | tools/testing/selftests/net/pmtu.sh | 112 |
2 files changed, 108 insertions, 17 deletions
diff --git a/net/ipv4/route.c b/net/ipv4/route.c index e31aa5a74ace4..f707cdb26ff20 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1034,6 +1034,19 @@ static void __ip_rt_update_pmtu(struct rtable *rt, struct flowi4 *fl4, u32 mtu) struct fib_nh_common *nhc; fib_select_path(net, &res, fl4, NULL); +#ifdef CONFIG_IP_ROUTE_MULTIPATH + if (fib_info_num_path(res.fi) > 1) { + int nhsel; + + for (nhsel = 0; nhsel < fib_info_num_path(res.fi); nhsel++) { + nhc = fib_info_nhc(res.fi, nhsel); + update_or_create_fnhe(nhc, fl4->daddr, 0, mtu, lock, + jiffies + net->ipv4.ip_rt_mtu_expires); + } + rcu_read_unlock(); + return; + } +#endif /* CONFIG_IP_ROUTE_MULTIPATH */ nhc = FIB_RES_NHC(res); update_or_create_fnhe(nhc, fl4->daddr, 0, mtu, lock, jiffies + net->ipv4.ip_rt_mtu_expires); diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh index 6c651c880fe83..66be7699c72c9 100755 --- a/tools/testing/selftests/net/pmtu.sh +++ b/tools/testing/selftests/net/pmtu.sh @@ -197,6 +197,12 @@ # # - pmtu_ipv6_route_change # Same as above but with IPv6 +# +# - pmtu_ipv4_mp_exceptions +# Use the same topology as in pmtu_ipv4, but add routeable addresses +# on host A and B on lo reachable via both routers. Host A and B +# addresses have multipath routes to each other, b_r1 mtu = 1500. +# Check that PMTU exceptions are created for both paths. source lib.sh source net_helper.sh @@ -266,7 +272,8 @@ tests=" list_flush_ipv4_exception ipv4: list and flush cached exceptions 1 list_flush_ipv6_exception ipv6: list and flush cached exceptions 1 pmtu_ipv4_route_change ipv4: PMTU exception w/route replace 1 - pmtu_ipv6_route_change ipv6: PMTU exception w/route replace 1" + pmtu_ipv6_route_change ipv6: PMTU exception w/route replace 1 + pmtu_ipv4_mp_exceptions ipv4: PMTU multipath nh exceptions 1" # Addressing and routing for tests with routers: four network segments, with # index SEGMENT between 1 and 4, a common prefix (PREFIX4 or PREFIX6) and an @@ -343,6 +350,9 @@ tunnel6_a_addr="fd00:2::a" tunnel6_b_addr="fd00:2::b" tunnel6_mask="64" +host4_a_addr="192.168.99.99" +host4_b_addr="192.168.88.88" + dummy6_0_prefix="fc00:1000::" dummy6_1_prefix="fc00:1001::" dummy6_mask="64" @@ -984,6 +994,52 @@ setup_ovs_bridge() { run_cmd ip route add ${prefix6}:${b_r1}::1 via ${prefix6}:${a_r1}::2 } +setup_multipath_new() { + # Set up host A with multipath routes to host B host4_b_addr + run_cmd ${ns_a} ip addr add ${host4_a_addr} dev lo + run_cmd ${ns_a} ip nexthop add id 401 via ${prefix4}.${a_r1}.2 dev veth_A-R1 + run_cmd ${ns_a} ip nexthop add id 402 via ${prefix4}.${a_r2}.2 dev veth_A-R2 + run_cmd ${ns_a} ip nexthop add id 403 group 401/402 + run_cmd ${ns_a} ip route add ${host4_b_addr} src ${host4_a_addr} nhid 403 + + # Set up host B with multipath routes to host A host4_a_addr + run_cmd ${ns_b} ip addr add ${host4_b_addr} dev lo + run_cmd ${ns_b} ip nexthop add id 401 via ${prefix4}.${b_r1}.2 dev veth_B-R1 + run_cmd ${ns_b} ip nexthop add id 402 via ${prefix4}.${b_r2}.2 dev veth_B-R2 + run_cmd ${ns_b} ip nexthop add id 403 group 401/402 + run_cmd ${ns_b} ip route add ${host4_a_addr} src ${host4_b_addr} nhid 403 +} + +setup_multipath_old() { + # Set up host A with multipath routes to host B host4_b_addr + run_cmd ${ns_a} ip addr add ${host4_a_addr} dev lo + run_cmd ${ns_a} ip route add ${host4_b_addr} \ + src ${host4_a_addr} \ + nexthop via ${prefix4}.${a_r1}.2 weight 1 \ + nexthop via ${prefix4}.${a_r2}.2 weight 1 + + # Set up host B with multipath routes to host A host4_a_addr + run_cmd ${ns_b} ip addr add ${host4_b_addr} dev lo + run_cmd ${ns_b} ip route add ${host4_a_addr} \ + src ${host4_b_addr} \ + nexthop via ${prefix4}.${b_r1}.2 weight 1 \ + nexthop via ${prefix4}.${b_r2}.2 weight 1 +} + +setup_multipath() { + if [ "$USE_NH" = "yes" ]; then + setup_multipath_new + else + setup_multipath_old + fi + + # Set up routers with routes to dummies + run_cmd ${ns_r1} ip route add ${host4_a_addr} via ${prefix4}.${a_r1}.1 + run_cmd ${ns_r2} ip route add ${host4_a_addr} via ${prefix4}.${a_r2}.1 + run_cmd ${ns_r1} ip route add ${host4_b_addr} via ${prefix4}.${b_r1}.1 + run_cmd ${ns_r2} ip route add ${host4_b_addr} via ${prefix4}.${b_r2}.1 +} + setup() { [ "$(id -u)" -ne 0 ] && echo " need to run as root" && return $ksft_skip @@ -1076,23 +1132,15 @@ link_get_mtu() { } route_get_dst_exception() { - ns_cmd="${1}" - dst="${2}" - dsfield="${3}" + ns_cmd="${1}"; shift - if [ -z "${dsfield}" ]; then - dsfield=0 - fi - - ${ns_cmd} ip route get "${dst}" dsfield "${dsfield}" + ${ns_cmd} ip route get "$@" } route_get_dst_pmtu_from_exception() { - ns_cmd="${1}" - dst="${2}" - dsfield="${3}" + ns_cmd="${1}"; shift - mtu_parse "$(route_get_dst_exception "${ns_cmd}" "${dst}" "${dsfield}")" + mtu_parse "$(route_get_dst_exception "${ns_cmd}" "$@")" } check_pmtu_value() { @@ -1235,10 +1283,10 @@ test_pmtu_ipv4_dscp_icmp_exception() { run_cmd "${ns_a}" ping -q -M want -Q "${dsfield}" -c 1 -w 1 -s "${len}" "${dst2}" # Check that exceptions have been created with the correct PMTU - pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" "${dst1}" "${policy_mark}")" + pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" "${dst1}" dsfield "${policy_mark}")" check_pmtu_value "1400" "${pmtu_1}" "exceeding MTU" || return 1 - pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" "${dst2}" "${policy_mark}")" + pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" "${dst2}" dsfield "${policy_mark}")" check_pmtu_value "1500" "${pmtu_2}" "exceeding MTU" || return 1 } @@ -1285,9 +1333,9 @@ test_pmtu_ipv4_dscp_udp_exception() { UDP:"${dst2}":50000,tos="${dsfield}" # Check that exceptions have been created with the correct PMTU - pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" "${dst1}" "${policy_mark}")" + pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" "${dst1}" dsfield "${policy_mark}")" check_pmtu_value "1400" "${pmtu_1}" "exceeding MTU" || return 1 - pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" "${dst2}" "${policy_mark}")" + pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" "${dst2}" dsfield "${policy_mark}")" check_pmtu_value "1500" "${pmtu_2}" "exceeding MTU" || return 1 } @@ -2329,6 +2377,36 @@ test_pmtu_ipv6_route_change() { test_pmtu_ipvX_route_change 6 } +test_pmtu_ipv4_mp_exceptions() { + setup namespaces routing multipath || return $ksft_skip + + trace "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \ + "${ns_r1}" veth_R1-B "${ns_b}" veth_B-R1 \ + "${ns_a}" veth_A-R2 "${ns_r2}" veth_R2-A \ + "${ns_r2}" veth_R2-B "${ns_b}" veth_B-R2 + + # Set up initial MTU values + mtu "${ns_a}" veth_A-R1 2000 + mtu "${ns_r1}" veth_R1-A 2000 + mtu "${ns_r1}" veth_R1-B 1500 + mtu "${ns_b}" veth_B-R1 1500 + + mtu "${ns_a}" veth_A-R2 2000 + mtu "${ns_r2}" veth_R2-A 2000 + mtu "${ns_r2}" veth_R2-B 1500 + mtu "${ns_b}" veth_B-R2 1500 + + # Ping and expect two nexthop exceptions for two routes + run_cmd ${ns_a} ping -q -M want -i 0.1 -c 1 -s 1800 "${host4_b_addr}" + + # Check that exceptions have been created with the correct PMTU + pmtu_a_R1="$(route_get_dst_pmtu_from_exception "${ns_a}" "${host4_b_addr}" oif veth_A-R1)" + pmtu_a_R2="$(route_get_dst_pmtu_from_exception "${ns_a}" "${host4_b_addr}" oif veth_A-R2)" + + check_pmtu_value "1500" "${pmtu_a_R1}" "exceeding MTU (veth_A-R1)" || return 1 + check_pmtu_value "1500" "${pmtu_a_R2}" "exceeding MTU (veth_A-R2)" || return 1 +} + usage() { echo echo "$0 [OPTIONS] [TEST]..." |