diff options
| -rw-r--r-- | drivers/usb/typec/tcpm/tcpci.c | 37 |
1 files changed, 36 insertions, 1 deletions
diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c index 7d36d5e2d3f7..7d9491ba62fb 100644 --- a/drivers/usb/typec/tcpm/tcpci.c +++ b/drivers/usb/typec/tcpm/tcpci.c @@ -191,12 +191,47 @@ static int tcpci_set_polarity(struct tcpc_dev *tcpc, struct tcpci *tcpci = tcpc_to_tcpci(tcpc); unsigned int reg; int ret; + enum typec_cc_status cc1, cc2; - /* Keep the disconnect cc line open */ + /* Obtain Rp setting from role control */ ret = regmap_read(tcpci->regmap, TCPC_ROLE_CTRL, ®); if (ret < 0) return ret; + ret = tcpci_get_cc(tcpc, &cc1, &cc2); + if (ret < 0) + return ret; + + /* + * When port has drp toggling enabled, ROLE_CONTROL would only have the initial + * terminations for the toggling and does not indicate the final cc + * terminations when ConnectionResult is 0 i.e. drp toggling stops and + * the connection is resolbed. Infer port role from TCPC_CC_STATUS based on the + * terminations seen. The port role is then used to set the cc terminations. + */ + if (reg & TCPC_ROLE_CTRL_DRP) { + /* Disable DRP for the OPEN setting to take effect */ + reg = reg & ~TCPC_ROLE_CTRL_DRP; + + if (polarity == TYPEC_POLARITY_CC2) { + reg &= ~(TCPC_ROLE_CTRL_CC2_MASK << TCPC_ROLE_CTRL_CC2_SHIFT); + /* Local port is source */ + if (cc2 == TYPEC_CC_RD) + /* Role control would have the Rp setting when DRP was enabled */ + reg |= TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC2_SHIFT; + else + reg |= TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT; + } else { + reg &= ~(TCPC_ROLE_CTRL_CC1_MASK << TCPC_ROLE_CTRL_CC1_SHIFT); + /* Local port is source */ + if (cc1 == TYPEC_CC_RD) + /* Role control would have the Rp setting when DRP was enabled */ + reg |= TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC1_SHIFT; + else + reg |= TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT; + } + } + if (polarity == TYPEC_POLARITY_CC2) reg |= TCPC_ROLE_CTRL_CC_OPEN << TCPC_ROLE_CTRL_CC1_SHIFT; else |