Merge tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
 "Core & protocols:

   - Improve drop account scalability on NUMA hosts for RAW and UDP
     sockets and the backlog, almost doubling the Pps capacity under DoS

   - Optimize the UDP RX performance under stress, reducing contention,
     revisiting the binary layout of the involved data structs and
     implementing NUMA-aware locking. This improves UDP RX performance
     by an additional 50%, even more under extreme conditions

   - Add support for PSP encryption of TCP connections; this mechanism
     has some similarities with IPsec and TLS, but offers superior HW
     offloads capabilities

   - Ongoing work to support Accurate ECN for TCP. AccECN allows more
     than one congestion notification signal per RTT and is a building
     block for Low Latency, Low Loss, and Scalable Throughput (L4S)

   - Reorganize the TCP socket binary layout for data locality, reducing
     the number of touched cachelines in the fastpath

   - Refactor skb deferral free to better scale on large multi-NUMA
     hosts, this improves TCP and UDP RX performances significantly on
     such HW

   - Increase the default socket memory buffer limits from 256K to 4M to
     better fit modern link speeds

   - Improve handling of setups with a large number of nexthop, making
     dump operating scaling linearly and avoiding unneeded
     synchronize_rcu() on delete

   - Improve bridge handling of VLAN FDB, storing a single entry per
     bridge instead of one entry per port; this makes the dump order of
     magnitude faster on large switches

   - Restore IP ID correctly for encapsulated packets at GSO
     segmentation time, allowing GRO to merge packets in more scenarios

   - Improve netfilter matching performance on large sets

   - Improve MPTCP receive path performance by leveraging recently
     introduced core infrastructure (skb deferral free) and adopting
     recent TCP autotuning changes

   - Allow bridges to redirect to a backup port when the bridge port is
     administratively down

   - Introduce MPTCP 'laminar' endpoint that con be used only once per
     connection and simplify common MPTCP setups

   - Add RCU safety to dst->dev, closing a lot of possible races

   - A significant crypto library API for SCTP, MPTCP and IPv6 SR,
     reducing code duplication

   - Supports pulling data from an skb frag into the linear area of an
     XDP buffer

  Things we sprinkled into general kernel code:

   - Generate netlink documentation from YAML using an integrated YAML
     parser

  Driver API:

   - Support using IPv6 Flow Label in Rx hash computation and RSS queue
     selection

   - Introduce API for fetching the DMA device for a given queue,
     allowing TCP zerocopy RX on more H/W setups

   - Make XDP helpers compatible with unreadable memory, allowing more
     easily building DevMem-enabled drivers with a unified XDP/skbs
     datapath

   - Add a new dedicated ethtool callback enabling drivers to provide
     the number of RX rings directly, improving efficiency and clarity
     in RX ring queries and RSS configuration

   - Introduce a burst period for the health reporter, allowing better
     handling of multiple errors due to the same root cause

   - Support for DPLL phase offset exponential moving average,
     controlling the average smoothing factor

  Device drivers:

   - Add a new Huawei driver for 3rd gen NIC (hinic3)

   - Add a new SpacemiT driver for K1 ethernet MAC

   - Add a generic abstraction for shared memory communication
     devices (dibps)

   - Ethernet high-speed NICs:
      - nVidia/Mellanox:
         - Use multiple per-queue doorbell, to avoid MMIO contention
           issues
         - support adjacent functions, allowing them to delegate their
           SR-IOV VFs to sibling PFs
         - support RSS for IPSec offload
         - support exposing raw cycle counters in PTP and mlx5
         - support for disabling host PFs.
      - Intel (100G, ice, idpf):
         - ice: support for SRIOV VFs over an Active-Active link
           aggregate
         - ice: support for firmware logging via debugfs
         - ice: support for Earliest TxTime First (ETF) hardware offload
         - idpf: support basic XDP functionalities and XSk
      - Broadcom (bnxt):
         - support Hyper-V VF ID
         - dynamic SRIOV resource allocations for RoCE
      - Meta (fbnic):
         - support queue API, zero-copy Rx and Tx
         - support basic XDP functionalities
         - devlink health support for FW crashes and OTP mem corruptions
         - expand hardware stats coverage to FEC, PHY, and Pause
      - Wangxun:
         - support ethtool coalesce options
         - support for multiple RSS contexts

   - Ethernet virtual:
      - Macsec:
         - replace custom netlink attribute checks with policy-level
           checks
      - Bonding:
         - support aggregator selection based on port priority
      - Microsoft vNIC:
         - use page pool fragments for RX buffers instead of full pages
           to improve memory efficiency

   - Ethernet NICs consumer, and embedded:
      - Qualcomm: support Ethernet function for IPQ9574 SoC
      - Airoha: implement wlan offloading via NPU
      - Freescale
         - enetc: add NETC timer PTP driver and add PTP support
         - fec: enable the Jumbo frame support for i.MX8QM
      - Renesas (R-Car S4):
         - support HW offloading for layer 2 switching
         - support for RZ/{T2H, N2H} SoCs
      - Cadence (macb): support TAPRIO traffic scheduling
      - TI:
         - support for Gigabit ICSS ethernet SoC (icssm-prueth)
      - Synopsys (stmmac): a lot of cleanups

   - Ethernet PHYs:
      - Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
        driver
      - Support bcm63268 GPHY power control
      - Support for Micrel lan8842 PHY and PTP
      - Support for Aquantia AQR412 and AQR115

   - CAN:
      - a large CAN-XL preparation work
      - reorganize raw_sock and uniqframe struct to minimize memory
        usage
      - rcar_canfd: update the CAN-FD handling

   - WiFi:
      - extended Neighbor Awareness Networking (NAN) support
      - S1G channel representation cleanup
      - improve S1G support

   - WiFi drivers:
      - Intel (iwlwifi):
         - major refactor and cleanup
      - Broadcom (brcm80211):
         - support for AP isolation
      - RealTek (rtw88/89) rtw88/89:
         - preparation work for RTL8922DE support
      - MediaTek (mt76):
         - HW restart improvements
         - MLO support
      - Qualcomm/Atheros (ath10k):
         - GTK rekey fixes

   - Bluetooth drivers:
      - btusb: support for several new IDs for MT7925
      - btintel: support for BlazarIW core
      - btintel_pcie: support for _suspend() / _resume()
      - btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"

* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
  net: stmmac: Add support for Allwinner A523 GMAC200
  dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
  Revert "Documentation: net: add flow control guide and document ethtool API"
  octeontx2-pf: fix bitmap leak
  octeontx2-vf: fix bitmap leak
  net/mlx5e: Use extack in set rxfh callback
  net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
  net/mlx5e: Introduce mlx5e_rss_init_params
  net/mlx5e: Remove unused mdev param from RSS indir init
  net/mlx5: Improve QoS error messages with actual depth values
  net/mlx5e: Prevent entering switchdev mode with inconsistent netns
  net/mlx5: HWS, Generalize complex matchers
  net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
  selftests/net: add tcp_port_share to .gitignore
  Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
  net: add NUMA awareness to skb_attempt_defer_free()
  net: use llist for sd->defer_list
  net: make softnet_data.defer_count an atomic
  selftests: drv-net: psp: add tests for destroying devices
  selftests: drv-net: psp: add test for auto-adjusting TCP MSS
  ...

1 files changed, 34 insertions, 11 deletions

diff --git a/tools/testing/selftests/net/lib/py/utils.py b/tools/testing/selftests/net/lib/py/utils.py
index f395c90fb0f1..cb40ecef9456 100644
--- a/tools/testing/selftests/net/lib/py/utils.py
+++ b/tools/testing/selftests/net/lib/py/utils.py
@@ -1,9 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 
-import errno
 import json as _json
 import os
-import random
 import re
 import select
 import socket
@@ -21,17 +19,19 @@ def fd_read_timeout(fd, timeout):
     rlist, _, _ = select.select([fd], [], [], timeout)
     if rlist:
         return os.read(fd, 1024)
-    else:
-        raise TimeoutError("Timeout waiting for fd read")
+    raise TimeoutError("Timeout waiting for fd read")
 
 
 class cmd:
     """
     Execute a command on local or remote host.
 
+    @shell defaults to false, and class will try to split @comm into a list
+    if it's a string with spaces.
+
     Use bkg() instead to run a command in the background.
     """
-    def __init__(self, comm, shell=True, fail=True, ns=None, background=False,
+    def __init__(self, comm, shell=None, fail=True, ns=None, background=False,
                  host=None, timeout=5, ksft_wait=None):
         if ns:
             comm = f'ip netns exec {ns} ' + comm
@@ -45,6 +45,10 @@ class cmd:
         if host:
             self.proc = host.cmd(comm)
         else:
+            # If user doesn't explicitly request shell try to avoid it.
+            if shell is None and isinstance(comm, str) and ' ' in comm:
+                comm = comm.split()
+
             # ksft_wait lets us wait for the background process to fully start,
             # we pass an FD to the child process, and wait for it to write back.
             # Similarly term_fd tells child it's time to exit.
@@ -111,12 +115,13 @@ class bkg(cmd):
 
         with bkg("my_binary", ksft_wait=5):
     """
-    def __init__(self, comm, shell=True, fail=None, ns=None, host=None,
+    def __init__(self, comm, shell=None, fail=None, ns=None, host=None,
                  exit_wait=False, ksft_wait=None):
         super().__init__(comm, background=True,
                          shell=shell, fail=fail, ns=ns, host=host,
                          ksft_wait=ksft_wait)
         self.terminate = not exit_wait and not ksft_wait
+        self._exit_wait = exit_wait
         self.check_fail = fail
 
         if shell and self.terminate:
@@ -127,7 +132,9 @@ class bkg(cmd):
         return self
 
     def __exit__(self, ex_type, ex_value, ex_tb):
-        return self.process(terminate=self.terminate, fail=self.check_fail)
+        # Force termination on exception
+        terminate = self.terminate or (self._exit_wait and ex_type)
+        return self.process(terminate=terminate, fail=self.check_fail)
 
 
 global_defer_queue = []
@@ -135,8 +142,6 @@ global_defer_queue = []
 
 class defer:
     def __init__(self, func, *args, **kwargs):
-        global global_defer_queue
-
         if not callable(func):
             raise Exception("defer created with un-callable object, did you call the function instead of passing its name?")
 
@@ -224,11 +229,11 @@ def bpftrace(expr, json=None, ns=None, host=None, timeout=None):
     return cmd_obj
 
 
-def rand_port(type=socket.SOCK_STREAM):
+def rand_port(stype=socket.SOCK_STREAM):
     """
     Get a random unprivileged port.
     """
-    with socket.socket(socket.AF_INET6, type) as s:
+    with socket.socket(socket.AF_INET6, stype) as s:
         s.bind(("", 0))
         return s.getsockname()[1]
 
@@ -249,3 +254,21 @@ def wait_port_listen(port, proto="tcp", ns=None, host=None, sleep=0.005, deadlin
         if time.monotonic() > end:
             raise Exception("Waiting for port listen timed out")
         time.sleep(sleep)
+
+
+def wait_file(fname, test_fn, sleep=0.005, deadline=5, encoding='utf-8'):
+    """
+    Wait for file contents on the local system to satisfy a condition.
+    test_fn() should take one argument (file contents) and return whether
+    condition is met.
+    """
+    end = time.monotonic() + deadline
+
+    with open(fname, "r", encoding=encoding) as fp:
+        while True:
+            if test_fn(fp.read()):
+                break
+            fp.seek(0)
+            if time.monotonic() > end:
+                raise TimeoutError("Wait for file contents failed", fname)
+            time.sleep(sleep)