ASoC: SOF: Intel: don't ignore IOC interrupts for non-audio transfers

The HDaudio stream interrupts are ignored unless the stream is PCM or
compressed audio. For alternate non-audio usages, such as code loader
or SoundWire BPT case, the IOC interrupt on the last buffer
transferred is silently ignored.

This patch adds a 'struct completion' for each HDaudio stream. This
capability helps detect if the non-audio data transfers
completed. There is no performance impact for audio streams.

In the code loader case, the code currently starts the DMA and
directly checks if the firmware status changes, without checking if
the DMA succeeded. With a first pass waiting for the DMA to complete,
system validation engineers can gather more precise timing information
on firmware boot time or root-cause boot failures more accurately.

A timeout of 500ms was selected for the code loader DMA. This is an
experimental value which should be more than enough - higher values
would certainly be problematic from a usage/latency perspective.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240404185448.136157-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

1 files changed, 28 insertions, 0 deletions

diff --git a/sound/soc/sof/intel/hda-loader.c b/sound/soc/sof/intel/hda-loader.c
index 5716772a7a91..dc88b7ea599e 100644
--- a/sound/soc/sof/intel/hda-loader.c
+++ b/sound/soc/sof/intel/hda-loader.c
@@ -226,10 +226,15 @@ int hda_cl_trigger(struct device *dev, struct hdac_ext_stream *hext_stream, int
 	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
 	struct hdac_stream *hstream = &hext_stream->hstream;
 	int sd_offset = SOF_STREAM_SD_OFFSET(hstream);
+	struct sof_intel_hda_stream *hda_stream;
 
 	/* code loader is special case that reuses stream ops */
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
+		hda_stream = container_of(hext_stream, struct sof_intel_hda_stream,
+					  hext_stream);
+		reinit_completion(&hda_stream->ioc);
+
 		snd_sof_dsp_update_bits(sdev, HDA_DSP_HDA_BAR, SOF_HDA_INTCTL,
 					1 << hstream->index,
 					1 << hstream->index);
@@ -283,19 +288,38 @@ int hda_cl_cleanup(struct device *dev, struct snd_dma_buffer *dmab,
 }
 EXPORT_SYMBOL_NS(hda_cl_cleanup, SND_SOC_SOF_INTEL_HDA_COMMON);
 
+#define HDA_CL_DMA_IOC_TIMEOUT_MS 500
+
 int hda_cl_copy_fw(struct snd_sof_dev *sdev, struct hdac_ext_stream *hext_stream)
 {
 	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
 	const struct sof_intel_dsp_desc *chip = hda->desc;
+	struct sof_intel_hda_stream *hda_stream;
+	unsigned long time_left;
 	unsigned int reg;
 	int ret, status;
 
+	hda_stream = container_of(hext_stream, struct sof_intel_hda_stream,
+				  hext_stream);
+
+	dev_dbg(sdev->dev, "Code loader DMA starting\n");
+
 	ret = hda_cl_trigger(sdev->dev, hext_stream, SNDRV_PCM_TRIGGER_START);
 	if (ret < 0) {
 		dev_err(sdev->dev, "error: DMA trigger start failed\n");
 		return ret;
 	}
 
+	/* Wait for completion of transfer */
+	time_left = wait_for_completion_timeout(&hda_stream->ioc,
+						msecs_to_jiffies(HDA_CL_DMA_IOC_TIMEOUT_MS));
+
+	if (!time_left) {
+		dev_err(sdev->dev, "Code loader DMA did not complete\n");
+		return -ETIMEDOUT;
+	}
+	dev_dbg(sdev->dev, "Code loader DMA done, waiting for FW_ENTERED status\n");
+
 	status = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
 					chip->rom_status_reg, reg,
 					(FSR_TO_STATE_CODE(reg) == FSR_STATE_FW_ENTERED),
@@ -311,6 +335,8 @@ int hda_cl_copy_fw(struct snd_sof_dev *sdev, struct hdac_ext_stream *hext_stream
 		dev_err(sdev->dev,
 			"%s: timeout with rom_status_reg (%#x) read\n",
 			__func__, chip->rom_status_reg);
+	} else {
+		dev_dbg(sdev->dev, "Code loader FW_ENTERED status\n");
 	}
 
 	ret = hda_cl_trigger(sdev->dev, hext_stream, SNDRV_PCM_TRIGGER_STOP);
@@ -318,6 +344,8 @@ int hda_cl_copy_fw(struct snd_sof_dev *sdev, struct hdac_ext_stream *hext_stream
 		dev_err(sdev->dev, "error: DMA trigger stop failed\n");
 		if (!status)
 			status = ret;
+	} else {
+		dev_dbg(sdev->dev, "Code loader DMA stopped\n");
 	}
 
 	return status;