i2c: rtl9300: remove broken SMBus Quick operation support

Remove the SMBus Quick operation from this driver because it is not
natively supported by the hardware and is wrongly implemented in the
driver.

The I2C controllers in Realtek RTL9300 and RTL9310 are SMBus-compliant
but there doesn't seem to be native support for the SMBus Quick
operation. It is not explicitly mentioned in the documentation but
looking at the registers which configure an SMBus transaction, one can
see that the data length cannot be set to 0. This suggests that the
hardware doesn't allow any SMBus message without data bytes (except for
those it does on it's own, see SMBus Block Read).

The current implementation of SMBus Quick operation passes a length of
0 (which is actually invalid). Before the fix of a bug in a previous
commit, this led to a read operation of 16 bytes from any register (the
one of a former transaction or any other value.

This caused issues like soft-bricked SFP modules after a simple probe
with i2cdetect which uses Quick by default. Running this with SFP
modules whose EEPROM isn't write-protected, some of the initial bytes
are overwritten because a 16-byte write operation is executed instead of
a Quick Write. (This temporarily soft-bricked one of my DAC cables.)

Because SMBus Quick operation is obviously not supported on these
controllers (because a length of 0 cannot be set, even when no register
address is set), remove that instead of claiming there is support. There
also shouldn't be any kind of emulated 'Quick' which just does another
kind of operation in the background. Otherwise, specific issues occur
in case of a 'Quick' Write which actually writes unknown data to an
unknown register.

Fixes: c366be720235 ("i2c: Add driver for the RTL9300 I2C controller")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250831100457.3114-4-jelonek.jonas@gmail.com

0 files changed, 0 insertions, 0 deletions