Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...

1 files changed, 58 insertions, 0 deletions

diff --git a/net/ethtool/common.c b/net/ethtool/common.c
index eb253e0fd61b..4f58648a27ad 100644
--- a/net/ethtool/common.c
+++ b/net/ethtool/common.c
@@ -707,7 +707,9 @@ static u32 ethtool_get_max_rxfh_channel(struct net_device *dev)
 	if (!rxfh.indir)
 		return U32_MAX;
 
+	mutex_lock(&dev->ethtool->rss_lock);
 	ret = dev->ethtool_ops->get_rxfh(dev, &rxfh);
+	mutex_unlock(&dev->ethtool->rss_lock);
 	if (ret) {
 		current_max = U32_MAX;
 		goto out_free;
@@ -804,12 +806,67 @@ out_free:
 	return rc;
 }
 
+struct ethtool_rxfh_context *
+ethtool_rxfh_ctx_alloc(const struct ethtool_ops *ops,
+		       u32 indir_size, u32 key_size)
+{
+	size_t indir_bytes, flex_len, key_off, size;
+	struct ethtool_rxfh_context *ctx;
+	u32 priv_bytes, indir_max;
+	u16 key_max;
+
+	key_max = max(key_size, ops->rxfh_key_space);
+	indir_max = max(indir_size, ops->rxfh_indir_space);
+
+	priv_bytes = ALIGN(ops->rxfh_priv_size, sizeof(u32));
+	indir_bytes = array_size(indir_max, sizeof(u32));
+
+	key_off = size_add(priv_bytes, indir_bytes);
+	flex_len = size_add(key_off, key_max);
+	size = struct_size_t(struct ethtool_rxfh_context, data, flex_len);
+
+	ctx = kzalloc(size, GFP_KERNEL_ACCOUNT);
+	if (!ctx)
+		return NULL;
+
+	ctx->indir_size = indir_size;
+	ctx->key_size = key_size;
+	ctx->key_off = key_off;
+	ctx->priv_size = ops->rxfh_priv_size;
+
+	ctx->hfunc = ETH_RSS_HASH_NO_CHANGE;
+	ctx->input_xfrm = RXH_XFRM_NO_CHANGE;
+
+	return ctx;
+}
+
+/* Check if fields configured for flow hash are symmetric - if src is included
+ * so is dst and vice versa.
+ */
+int ethtool_rxfh_config_is_sym(u64 rxfh)
+{
+	bool sym;
+
+	sym = rxfh == (rxfh & (RXH_IP_SRC | RXH_IP_DST |
+			       RXH_L4_B_0_1 | RXH_L4_B_2_3));
+	sym &= !!(rxfh & RXH_IP_SRC)   == !!(rxfh & RXH_IP_DST);
+	sym &= !!(rxfh & RXH_L4_B_0_1) == !!(rxfh & RXH_L4_B_2_3);
+
+	return sym;
+}
+
 int ethtool_check_ops(const struct ethtool_ops *ops)
 {
 	if (WARN_ON(ops->set_coalesce && !ops->supported_coalesce_params))
 		return -EINVAL;
 	if (WARN_ON(ops->rxfh_max_num_contexts == 1))
 		return -EINVAL;
+	if (WARN_ON(ops->supported_input_xfrm && !ops->get_rxfh_fields))
+		return -EINVAL;
+	if (WARN_ON(ops->supported_input_xfrm &&
+		    ops->rxfh_per_ctx_fields != ops->rxfh_per_ctx_key))
+		return -EINVAL;
+
 	/* NOTE: sufficiently insane drivers may swap ethtool_ops at runtime,
 	 * the fact that ops are checked at registration time does not
 	 * mean the ops attached to a netdev later on are sane.
@@ -1079,5 +1136,6 @@ void ethtool_rxfh_context_lost(struct net_device *dev, u32 context_id)
 	netdev_err(dev, "device error, RSS context %d lost\n", context_id);
 	ctx = xa_erase(&dev->ethtool->rss_ctx, context_id);
 	kfree(ctx);
+	ethtool_rss_notify(dev, ETHTOOL_MSG_RSS_DELETE_NTF, context_id);
 }
 EXPORT_SYMBOL(ethtool_rxfh_context_lost);