Merge branch 'Replay-and-offload-host-VLAN-entries-in-DSA'

Vladimir Oltean says:

====================
Replay and offload host VLAN entries in DSA

v2->v3:
- make the bridge stop notifying switchdev for !BRENTRY VLANs
- create precommit and commit wrappers around __vlan_add_flags().
- special-case the BRENTRY transition from false to true, instead of
  treating it as a change of flags and letting drivers figure out that
  it really isn't.
- avoid setting *changed unless we know that functions will not error
  out later.
- drop "old_flags" from struct switchdev_obj_port_vlan, nobody needs it
  now, in v2 only DSA needed it to filter out BRENTRY transitions, that
  is now solved cleaner.
- no BRIDGE_VLAN_INFO_BRENTRY flag checks and manipulations in DSA
  whatsoever, use the "bool changed" bit as-is after changing what it
  means.
- merge dsa_slave_host_vlan_{add,del}() with
  dsa_slave_foreign_vlan_{add,del}(), since now they do the same thing,
  because the host_vlan functions no longer need to mangle the vlan
  BRENTRY flags and bool changed.

v1->v2:
- prune switchdev VLAN additions with no actual change differently
- no longer need to revert struct net_bridge_vlan changes on error from
  switchdev
- no longer need to first delete a changed VLAN before readding it
- pass 'bool changed' and 'u16 old_flags' through switchdev_obj_port_vlan
  so that DSA can do some additional post-processing with the
  BRIDGE_VLAN_INFO_BRENTRY flag
- support VLANs on foreign interfaces
- fix the same -EOPNOTSUPP error in mv88e6xxx, this time on removal, due
  to VLAN deletion getting replayed earlier than FDB deletion

The motivation behind these patches is that Rafael reported the
following error with mv88e6xxx when the first switch port joins a
bridge:

mv88e6085 0x0000000008b96000:00: port 0 failed to add a6:ef:77:c8:5f:3d vid 1 to fdb: -95 (-EOPNOTSUPP)

The FDB entry that's added is the MAC address of the bridge, in VID 1
(the default_pvid), being replayed as part of br_add_if() -> ... ->
nbp_switchdev_sync_objs().

-EOPNOTSUPP is the mv88e6xxx driver's way of saying that VID 1 doesn't
exist in the VTU, so it can't program the ATU with a FID, something
which it needs.

It appears to be a race, but it isn't, since we only end up installing
VID 1 in the VTU by coincidence. DSA's approximation of programming
VLANs on the CPU port together with the user ports breaks down with
host FDB entries on mv88e6xxx, since that strictly requires the VTU to
contain the VID. But the user may freely add VLANs pointing just towards
the bridge, and FDB entries in those VLANs, and DSA will not be aware of
them, because it only listens for VLANs on user ports.

To create a solution that scales properly to cross-chip setups and
doesn't leak entries behind, some changes in the bridge driver are
required. I believe that these are for the better overall, but I may be
wrong. Namely, the same refcounting procedure that DSA has in place for
host FDB and MDB entries can be replicated for VLANs, except that it's
garbage in, garbage out: the VLAN addition and removal notifications
from switchdev aren't balanced. So the first 2 patches attempt to deal
with that.

This patch set has been superficially tested on a board with 3 mv88e6xxx
switches in a daisy chain and appears to produce the primary desired
effect - the driver no longer returns -EOPNOTSUPP when the first port
joins a bridge, and is successful in performing local termination under
a VLAN-aware bridge.
As an additional side effect, it silences the annoying "p%d: already a
member of VLAN %d\n" warning messages that the mv88e6xxx driver produces
when coupled with systemd-networkd, and a few VLANs are configured.
Furthermore, it advances Florian's idea from a few years back, which
never got merged:
https://lore.kernel.org/lkml/20180624153339.13572-1-f.fainelli@gmail.com/
v2 has also been tested on the NXP LS1028A felix switch.

Some testing:

root@debian:~# bridge vlan add dev br0 vid 101 pvid self
[  100.709220] mv88e6085 d0032004.mdio-mii:10: mv88e6xxx_port_vlan_add: port 9 vlan 101
[  100.873426] mv88e6085 d0032004.mdio-mii:10: mv88e6xxx_port_vlan_add: port 10 vlan 101
[  100.892314] mv88e6085 d0032004.mdio-mii:11: mv88e6xxx_port_vlan_add: port 9 vlan 101
[  101.053392] mv88e6085 d0032004.mdio-mii:11: mv88e6xxx_port_vlan_add: port 10 vlan 101
[  101.076994] mv88e6085 d0032004.mdio-mii:12: mv88e6xxx_port_vlan_add: port 9 vlan 101
root@debian:~# bridge vlan add dev br0 vid 101 pvid self
root@debian:~# bridge vlan add dev br0 vid 101 pvid self
root@debian:~# bridge vlan
port              vlan-id
eth0              1 PVID Egress Untagged
lan9              1 PVID Egress Untagged
lan10             1 PVID Egress Untagged
lan11             1 PVID Egress Untagged
lan12             1 PVID Egress Untagged
lan13             1 PVID Egress Untagged
lan14             1 PVID Egress Untagged
lan15             1 PVID Egress Untagged
lan16             1 PVID Egress Untagged
lan17             1 PVID Egress Untagged
lan18             1 PVID Egress Untagged
lan19             1 PVID Egress Untagged
lan20             1 PVID Egress Untagged
lan21             1 PVID Egress Untagged
lan22             1 PVID Egress Untagged
lan23             1 PVID Egress Untagged
lan24             1 PVID Egress Untagged
sfp               1 PVID Egress Untagged
lan1              1 PVID Egress Untagged
lan2              1 PVID Egress Untagged
lan3              1 PVID Egress Untagged
lan4              1 PVID Egress Untagged
lan5              1 PVID Egress Untagged
lan6              1 PVID Egress Untagged
lan7              1 PVID Egress Untagged
lan8              1 PVID Egress Untagged
br0               1 Egress Untagged
                  101 PVID
root@debian:~# bridge vlan del dev br0 vid 101 pvid self
[  108.340487] mv88e6085 d0032004.mdio-mii:11: mv88e6xxx_port_vlan_del: port 9 vlan 101
[  108.379167] mv88e6085 d0032004.mdio-mii:11: mv88e6xxx_port_vlan_del: port 10 vlan 101
[  108.402319] mv88e6085 d0032004.mdio-mii:12: mv88e6xxx_port_vlan_del: port 9 vlan 101
[  108.425866] mv88e6085 d0032004.mdio-mii:10: mv88e6xxx_port_vlan_del: port 9 vlan 101
[  108.452280] mv88e6085 d0032004.mdio-mii:10: mv88e6xxx_port_vlan_del: port 10 vlan 101
root@debian:~# bridge vlan del dev br0 vid 101 pvid self
root@debian:~# bridge vlan del dev br0 vid 101 pvid self
root@debian:~# bridge vlan
port              vlan-id
eth0              1 PVID Egress Untagged
lan9              1 PVID Egress Untagged
lan10             1 PVID Egress Untagged
lan11             1 PVID Egress Untagged
lan12             1 PVID Egress Untagged
lan13             1 PVID Egress Untagged
lan14             1 PVID Egress Untagged
lan15             1 PVID Egress Untagged
lan16             1 PVID Egress Untagged
lan17             1 PVID Egress Untagged
lan18             1 PVID Egress Untagged
lan19             1 PVID Egress Untagged
lan20             1 PVID Egress Untagged
lan21             1 PVID Egress Untagged
lan22             1 PVID Egress Untagged
lan23             1 PVID Egress Untagged
lan24             1 PVID Egress Untagged
sfp               1 PVID Egress Untagged
lan1              1 PVID Egress Untagged
lan2              1 PVID Egress Untagged
lan3              1 PVID Egress Untagged
lan4              1 PVID Egress Untagged
lan5              1 PVID Egress Untagged
lan6              1 PVID Egress Untagged
lan7              1 PVID Egress Untagged
lan8              1 PVID Egress Untagged
br0               1 Egress Untagged
root@debian:~# bridge vlan del dev br0 vid 101 pvid self
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 64 insertions, 48 deletions

diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 2f6caf5d037ee..f61e6b72ffbbb 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -348,9 +348,8 @@ static int dsa_slave_vlan_add(struct net_device *dev,
 			      const struct switchdev_obj *obj,
 			      struct netlink_ext_ack *extack)
 {
-	struct net_device *master = dsa_slave_to_master(dev);
 	struct dsa_port *dp = dsa_slave_to_port(dev);
-	struct switchdev_obj_port_vlan vlan;
+	struct switchdev_obj_port_vlan *vlan;
 	int err;
 
 	if (dsa_port_skip_vlan_configuration(dp)) {
@@ -358,14 +357,14 @@ static int dsa_slave_vlan_add(struct net_device *dev,
 		return 0;
 	}
 
-	vlan = *SWITCHDEV_OBJ_PORT_VLAN(obj);
+	vlan = SWITCHDEV_OBJ_PORT_VLAN(obj);
 
 	/* Deny adding a bridge VLAN when there is already an 802.1Q upper with
 	 * the same VID.
 	 */
 	if (br_vlan_enabled(dsa_port_bridge_dev_get(dp))) {
 		rcu_read_lock();
-		err = dsa_slave_vlan_check_for_8021q_uppers(dev, &vlan);
+		err = dsa_slave_vlan_check_for_8021q_uppers(dev, vlan);
 		rcu_read_unlock();
 		if (err) {
 			NL_SET_ERR_MSG_MOD(extack,
@@ -374,21 +373,36 @@ static int dsa_slave_vlan_add(struct net_device *dev,
 		}
 	}
 
-	err = dsa_port_vlan_add(dp, &vlan, extack);
-	if (err)
-		return err;
+	return dsa_port_vlan_add(dp, vlan, extack);
+}
+
+/* Offload a VLAN installed on the bridge or on a foreign interface by
+ * installing it as a VLAN towards the CPU port.
+ */
+static int dsa_slave_host_vlan_add(struct net_device *dev,
+				   const struct switchdev_obj *obj,
+				   struct netlink_ext_ack *extack)
+{
+	struct dsa_port *dp = dsa_slave_to_port(dev);
+	struct switchdev_obj_port_vlan vlan;
+
+	/* Do nothing if this is a software bridge */
+	if (!dp->bridge)
+		return -EOPNOTSUPP;
+
+	if (dsa_port_skip_vlan_configuration(dp)) {
+		NL_SET_ERR_MSG_MOD(extack, "skipping configuration of VLAN");
+		return 0;
+	}
 
-	/* We need the dedicated CPU port to be a member of the VLAN as well.
-	 * Even though drivers often handle CPU membership in special ways,
+	vlan = *SWITCHDEV_OBJ_PORT_VLAN(obj);
+
+	/* Even though drivers often handle CPU membership in special ways,
 	 * it doesn't make sense to program a PVID, so clear this flag.
 	 */
 	vlan.flags &= ~BRIDGE_VLAN_INFO_PVID;
 
-	err = dsa_port_vlan_add(dp->cpu_dp, &vlan, extack);
-	if (err)
-		return err;
-
-	return vlan_vid_add(master, htons(ETH_P_8021Q), vlan.vid);
+	return dsa_port_host_vlan_add(dp, &vlan, extack);
 }
 
 static int dsa_slave_port_obj_add(struct net_device *dev, const void *ctx,
@@ -415,10 +429,10 @@ static int dsa_slave_port_obj_add(struct net_device *dev, const void *ctx,
 		err = dsa_port_host_mdb_add(dp, SWITCHDEV_OBJ_PORT_MDB(obj));
 		break;
 	case SWITCHDEV_OBJ_ID_PORT_VLAN:
-		if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev))
-			return -EOPNOTSUPP;
-
-		err = dsa_slave_vlan_add(dev, obj, extack);
+		if (dsa_port_offloads_bridge_port(dp, obj->orig_dev))
+			err = dsa_slave_vlan_add(dev, obj, extack);
+		else
+			err = dsa_slave_host_vlan_add(dev, obj, extack);
 		break;
 	case SWITCHDEV_OBJ_ID_MRP:
 		if (!dsa_port_offloads_bridge_dev(dp, obj->orig_dev))
@@ -444,26 +458,33 @@ static int dsa_slave_port_obj_add(struct net_device *dev, const void *ctx,
 static int dsa_slave_vlan_del(struct net_device *dev,
 			      const struct switchdev_obj *obj)
 {
-	struct net_device *master = dsa_slave_to_master(dev);
 	struct dsa_port *dp = dsa_slave_to_port(dev);
 	struct switchdev_obj_port_vlan *vlan;
-	int err;
 
 	if (dsa_port_skip_vlan_configuration(dp))
 		return 0;
 
 	vlan = SWITCHDEV_OBJ_PORT_VLAN(obj);
 
-	/* Do not deprogram the CPU port as it may be shared with other user
-	 * ports which can be members of this VLAN as well.
-	 */
-	err = dsa_port_vlan_del(dp, vlan);
-	if (err)
-		return err;
+	return dsa_port_vlan_del(dp, vlan);
+}
 
-	vlan_vid_del(master, htons(ETH_P_8021Q), vlan->vid);
+static int dsa_slave_host_vlan_del(struct net_device *dev,
+				   const struct switchdev_obj *obj)
+{
+	struct dsa_port *dp = dsa_slave_to_port(dev);
+	struct switchdev_obj_port_vlan *vlan;
 
-	return 0;
+	/* Do nothing if this is a software bridge */
+	if (!dp->bridge)
+		return -EOPNOTSUPP;
+
+	if (dsa_port_skip_vlan_configuration(dp))
+		return 0;
+
+	vlan = SWITCHDEV_OBJ_PORT_VLAN(obj);
+
+	return dsa_port_host_vlan_del(dp, vlan);
 }
 
 static int dsa_slave_port_obj_del(struct net_device *dev, const void *ctx,
@@ -489,10 +510,10 @@ static int dsa_slave_port_obj_del(struct net_device *dev, const void *ctx,
 		err = dsa_port_host_mdb_del(dp, SWITCHDEV_OBJ_PORT_MDB(obj));
 		break;
 	case SWITCHDEV_OBJ_ID_PORT_VLAN:
-		if (!dsa_port_offloads_bridge_port(dp, obj->orig_dev))
-			return -EOPNOTSUPP;
-
-		err = dsa_slave_vlan_del(dev, obj);
+		if (dsa_port_offloads_bridge_port(dp, obj->orig_dev))
+			err = dsa_slave_vlan_del(dev, obj);
+		else
+			err = dsa_slave_host_vlan_del(dev, obj);
 		break;
 	case SWITCHDEV_OBJ_ID_MRP:
 		if (!dsa_port_offloads_bridge_dev(dp, obj->orig_dev))
@@ -1347,7 +1368,6 @@ static int dsa_slave_get_ts_info(struct net_device *dev,
 static int dsa_slave_vlan_rx_add_vid(struct net_device *dev, __be16 proto,
 				     u16 vid)
 {
-	struct net_device *master = dsa_slave_to_master(dev);
 	struct dsa_port *dp = dsa_slave_to_port(dev);
 	struct switchdev_obj_port_vlan vlan = {
 		.obj.id = SWITCHDEV_OBJ_ID_PORT_VLAN,
@@ -1367,7 +1387,7 @@ static int dsa_slave_vlan_rx_add_vid(struct net_device *dev, __be16 proto,
 	}
 
 	/* And CPU port... */
-	ret = dsa_port_vlan_add(dp->cpu_dp, &vlan, &extack);
+	ret = dsa_port_host_vlan_add(dp, &vlan, &extack);
 	if (ret) {
 		if (extack._msg)
 			netdev_err(dev, "CPU port %d: %s\n", dp->cpu_dp->index,
@@ -1375,13 +1395,12 @@ static int dsa_slave_vlan_rx_add_vid(struct net_device *dev, __be16 proto,
 		return ret;
 	}
 
-	return vlan_vid_add(master, proto, vid);
+	return 0;
 }
 
 static int dsa_slave_vlan_rx_kill_vid(struct net_device *dev, __be16 proto,
 				      u16 vid)
 {
-	struct net_device *master = dsa_slave_to_master(dev);
 	struct dsa_port *dp = dsa_slave_to_port(dev);
 	struct switchdev_obj_port_vlan vlan = {
 		.vid = vid,
@@ -1390,16 +1409,11 @@ static int dsa_slave_vlan_rx_kill_vid(struct net_device *dev, __be16 proto,
 	};
 	int err;
 
-	/* Do not deprogram the CPU port as it may be shared with other user
-	 * ports which can be members of this VLAN as well.
-	 */
 	err = dsa_port_vlan_del(dp, &vlan);
 	if (err)
 		return err;
 
-	vlan_vid_del(master, proto, vid);
-
-	return 0;
+	return dsa_port_host_vlan_del(dp, &vlan);
 }
 
 static int dsa_slave_restore_vlan(struct net_device *vdev, int vid, void *arg)
@@ -2530,14 +2544,16 @@ static int dsa_slave_switchdev_blocking_event(struct notifier_block *unused,
 
 	switch (event) {
 	case SWITCHDEV_PORT_OBJ_ADD:
-		err = switchdev_handle_port_obj_add(dev, ptr,
-						    dsa_slave_dev_check,
-						    dsa_slave_port_obj_add);
+		err = switchdev_handle_port_obj_add_foreign(dev, ptr,
+							    dsa_slave_dev_check,
+							    dsa_foreign_dev_check,
+							    dsa_slave_port_obj_add);
 		return notifier_from_errno(err);
 	case SWITCHDEV_PORT_OBJ_DEL:
-		err = switchdev_handle_port_obj_del(dev, ptr,
-						    dsa_slave_dev_check,
-						    dsa_slave_port_obj_del);
+		err = switchdev_handle_port_obj_del_foreign(dev, ptr,
+							    dsa_slave_dev_check,
+							    dsa_foreign_dev_check,
+							    dsa_slave_port_obj_del);
 		return notifier_from_errno(err);
 	case SWITCHDEV_PORT_ATTR_SET:
 		err = switchdev_handle_port_attr_set(dev, ptr,