scsi: Rename .slave_alloc() and .slave_destroy()

Rename .slave_alloc() into .sdev_init() and .slave_destroy() into
.sdev_destroy(). The new names make it clear that these are actions on
SCSI devices. Make this change in the SCSI core, SCSI drivers and also
in the ATA drivers. No functionality has been changed.

This patch has been created as follows:
* Change the text "slave_alloc" into "sdev_init" in all source files
  except those in drivers/net/ and Documentation/.
* Change the text "slave_destroy" into "sdev_destroy" in all source
  files except those in drivers/net/ and Documentation/.
* Rename lpfc_no_slave() into lpfc_no_sdev().
* Manually adjust whitespace where necessary to restore vertical
  alignment (dc395x driver and include/linux/libata.h).

Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022180839.2712439-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

4 files changed, 13 insertions, 13 deletions

diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index 4a9b4169e081..183d9fd50d2d 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -963,7 +963,7 @@ int fc_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
 int fc_eh_abort(struct scsi_cmnd *);
 int fc_eh_device_reset(struct scsi_cmnd *);
 int fc_eh_host_reset(struct scsi_cmnd *);
-int fc_slave_alloc(struct scsi_device *);
+int fc_sdev_init(struct scsi_device *);
 
 /*
  * ELS/CT interface
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index 1324068dd950..f30f716ba045 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -703,7 +703,7 @@ int sas_eh_device_reset_handler(struct scsi_cmnd *cmd);
 int sas_eh_target_reset_handler(struct scsi_cmnd *cmd);
 
 extern void sas_target_destroy(struct scsi_target *);
-extern int sas_slave_alloc(struct scsi_device *);
+extern int sas_sdev_init(struct scsi_device *);
 extern int sas_ioctl(struct scsi_device *sdev, unsigned int cmd,
 		     void __user *arg);
 extern int sas_drain_work(struct sas_ha_struct *ha);
@@ -751,7 +751,7 @@ void sas_notify_phy_event(struct asd_sas_phy *phy, enum phy_event event,
 
 #define LIBSAS_SHT_BASE			_LIBSAS_SHT_BASE		\
 	.device_configure		= sas_device_configure,		\
-	.slave_alloc			= sas_slave_alloc,		\
+	.sdev_init			= sas_sdev_init,		\
 
 #define LIBSAS_SHT_BASE_NO_SLAVE_INIT	_LIBSAS_SHT_BASE
 
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 9c540f5468eb..7acd0ec82bb0 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -155,7 +155,7 @@ struct scsi_device {
 
 	blist_flags_t		sdev_bflags; /* black/white flags as also found in
 				 * scsi_devinfo.[hc]. For now used only to
-				 * pass settings from slave_alloc to scsi
+				 * pass settings from sdev_init to scsi
 				 * core. */
 	unsigned int eh_timeout; /* Error handling timeout */
 
@@ -357,7 +357,7 @@ struct scsi_target {
 	atomic_t		target_blocked;
 
 	/*
-	 * LLDs should set this in the slave_alloc host template callout.
+	 * LLDs should set this in the sdev_init host template callout.
 	 * If set to zero then there is not limit.
 	 */
 	unsigned int		can_queue;
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 2b4ab0369ffb..58b29cc6de09 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -168,20 +168,20 @@ struct scsi_host_template {
 	 * Return values: 0 on success, non-0 on failure
 	 *
 	 * Deallocation:  If we didn't find any devices at this ID, you will
-	 * get an immediate call to slave_destroy().  If we find something
+	 * get an immediate call to sdev_destroy().  If we find something
 	 * here then you will get a call to slave_configure(), then the
 	 * device will be used for however long it is kept around, then when
 	 * the device is removed from the system (or * possibly at reboot
-	 * time), you will then get a call to slave_destroy().  This is
-	 * assuming you implement slave_configure and slave_destroy.
+	 * time), you will then get a call to sdev_destroy().  This is
+	 * assuming you implement slave_configure and sdev_destroy.
 	 * However, if you allocate memory and hang it off the device struct,
-	 * then you must implement the slave_destroy() routine at a minimum
+	 * then you must implement the sdev_destroy() routine at a minimum
 	 * in order to avoid leaking memory
 	 * each time a device is tore down.
 	 *
 	 * Status: OPTIONAL
 	 */
-	int (* slave_alloc)(struct scsi_device *);
+	int (* sdev_init)(struct scsi_device *);
 
 	/*
 	 * Once the device has responded to an INQUIRY and we know the
@@ -206,7 +206,7 @@ struct scsi_host_template {
 	 *     specific setup basis...
 	 * 6.  Return 0 on success, non-0 on error.  The device will be marked
 	 *     as offline on error so that no access will occur.  If you return
-	 *     non-0, your slave_destroy routine will never get called for this
+	 *     non-0, your sdev_destroy routine will never get called for this
 	 *     device, so don't leave any loose memory hanging around, clean
 	 *     up after yourself before returning non-0
 	 *
@@ -223,11 +223,11 @@ struct scsi_host_template {
 	 * has ceased the mid layer calls this point so that the low level
 	 * driver may completely detach itself from the scsi device and vice
 	 * versa.  The low level driver is responsible for freeing any memory
-	 * it allocated in the slave_alloc or slave_configure calls. 
+	 * it allocated in the sdev_init or slave_configure calls. 
 	 *
 	 * Status: OPTIONAL
 	 */
-	void (* slave_destroy)(struct scsi_device *);
+	void (* sdev_destroy)(struct scsi_device *);
 
 	/*
 	 * Before the mid layer attempts to scan for a new device attached