Merge tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.14

Most likely the last "new features" pull request for v6.14 and this is
a bigger one. Multi-Link Operation (MLO) work continues both in stack
in drivers. Few new devices supported and usual fixes all over.

Major changes:

cfg80211
 * Emergency Preparedness Communication Services (EPCS) station mode support

mac80211
 * an option to filter a sta from being flushed
 * some support for RX Operating Mode Indication (OMI) power saving
 * support for adding and removing station links for MLO

iwlwifi
 * new device ids
 * rework firmware error handling and restart

rtw88
 * RTL8812A: RFE type 2 support
 * LED support

rtw89
 * variant info to support RTL8922AE-VS

mt76
 * mt7996: single wiphy multiband support (preparation for MLO)
 * mt7996: support for more variants
 * mt792x: P2P_DEVICE support
 * mt7921u: TP-Link TXE50UH support

ath12k
 * enable MLO for QCN9274 (although it seems to be broken with dual
   band devices)
 * MLO radar detection support
 * debugfs: transmit buffer OFDMA, AST entry and puncture stats

* tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (322 commits)
  wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize()
  wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to Kconfig
  wifi: wilc1000: unregister wiphy only after netdev registration
  wifi: cfg80211: adjust allocation of colocated AP data
  wifi: mac80211: fix memory leak in ieee80211_mgd_assoc_ml_reconf()
  wifi: ath12k: fix key cache handling
  wifi: ath12k: Fix uninitialized variable access in ath12k_mac_allocate() function
  wifi: ath12k: Remove ath12k_get_num_hw() helper function
  wifi: ath12k: Refactor the ath12k_hw get helper function argument
  wifi: ath12k: Refactor ath12k_hw set helper function argument
  wifi: mt76: mt7996: add implicit beamforming support for mt7992
  wifi: mt76: mt7996: fix beacon command during disabling
  wifi: mt76: mt7996: fix ldpc setting
  wifi: mt76: mt7996: fix definition of tx descriptor
  wifi: mt76: connac: adjust phy capabilities based on band constraints
  wifi: mt76: mt7996: fix incorrect indexing of MIB FW event
  wifi: mt76: mt7996: fix HE Phy capability
  wifi: mt76: mt7996: fix the capability of reception of EHT MU PPDU
  wifi: mt76: mt7996: add max mpdu len capability
  wifi: mt76: mt7921: avoid undesired changes of the preset regulatory domain
  ...
====================

Link: https://patch.msgid.link/20250117203529.72D45C4CEDD@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 67 insertions, 0 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 7790af534b7f6..363d7dd2255aa 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -3023,6 +3023,10 @@ static inline const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 id)
  *
  * @bss: The BSS to authenticate with, the callee must obtain a reference
  *	to it if it needs to keep it.
+ * @supported_selectors: List of selectors that should be assumed to be
+ *	supported by the station.
+ *	SAE_H2E must be assumed supported if set to %NULL.
+ * @supported_selectors_len: Length of supported_selectors in octets.
  * @auth_type: Authentication type (algorithm)
  * @ie: Extra IEs to add to Authentication frame or %NULL
  * @ie_len: Length of ie buffer in octets
@@ -3045,6 +3049,8 @@ struct cfg80211_auth_request {
 	struct cfg80211_bss *bss;
 	const u8 *ie;
 	size_t ie_len;
+	const u8 *supported_selectors;
+	u8 supported_selectors_len;
 	enum nl80211_auth_type auth_type;
 	const u8 *key;
 	u8 key_len;
@@ -3124,6 +3130,10 @@ enum cfg80211_assoc_req_flags {
  *	included in the Current AP address field of the Reassociation Request
  *	frame.
  * @flags:  See &enum cfg80211_assoc_req_flags
+ * @supported_selectors: supported selectors in IEEE 802.11 format
+ *	(or %NULL for no change).
+ *	If %NULL, then support for SAE_H2E should be assumed.
+ * @supported_selectors_len: Length of supported_selectors in octets.
  * @ht_capa:  HT Capabilities over-rides.  Values set in ht_capa_mask
  *	will be used in ht_capa.  Un-supported values will be ignored.
  * @ht_capa_mask:  The bits of ht_capa which are to be used.
@@ -3150,6 +3160,8 @@ struct cfg80211_assoc_request {
 	struct cfg80211_crypto_settings crypto;
 	bool use_mfp;
 	u32 flags;
+	const u8 *supported_selectors;
+	u8 supported_selectors_len;
 	struct ieee80211_ht_cap ht_capa;
 	struct ieee80211_ht_cap ht_capa_mask;
 	struct ieee80211_vht_cap vht_capa, vht_capa_mask;
@@ -4582,8 +4594,18 @@ struct mgmt_frame_regs {
  *
  * @set_hw_timestamp: Enable/disable HW timestamping of TM/FTM frames.
  * @set_ttlm: set the TID to link mapping.
+ * @set_epcs: Enable/Disable EPCS for station mode.
  * @get_radio_mask: get bitmask of radios in use.
  *	(invoked with the wiphy mutex held)
+ * @assoc_ml_reconf: Request a non-AP MLO connection to perform ML
+ *	reconfiguration, i.e., add and/or remove links to/from the
+ *	association using ML reconfiguration action frames. Successfully added
+ *	links will be added to the set of valid links. Successfully removed
+ *	links will be removed from the set of valid links. The driver must
+ *	indicate removed links by calling cfg80211_links_removed() and added
+ *	links by calling cfg80211_mlo_reconf_add_done(). When calling
+ *	cfg80211_mlo_reconf_add_done() the bss pointer must be given for each
+ *	link for which MLO reconfiguration 'add' operation was requested.
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -4947,6 +4969,11 @@ struct cfg80211_ops {
 	int	(*set_ttlm)(struct wiphy *wiphy, struct net_device *dev,
 			    struct cfg80211_ttlm_params *params);
 	u32	(*get_radio_mask)(struct wiphy *wiphy, struct net_device *dev);
+	int     (*assoc_ml_reconf)(struct wiphy *wiphy, struct net_device *dev,
+				   struct cfg80211_assoc_link *add_links,
+				   u16 rem_links);
+	int	(*set_epcs)(struct wiphy *wiphy, struct net_device *dev,
+			    bool val);
 };
 
 /*
@@ -9705,6 +9732,39 @@ static inline int cfg80211_color_change_notify(struct net_device *dev,
 void cfg80211_links_removed(struct net_device *dev, u16 link_mask);
 
 /**
+ * struct cfg80211_mlo_reconf_done_data - MLO reconfiguration data
+ * @buf: MLO Reconfiguration Response frame (header + body)
+ * @len: length of the frame data
+ * @added_links: BIT mask of links successfully added to the association
+ * @links: per-link information indexed by link ID
+ * @links.bss: the BSS that MLO reconfiguration was requested for, ownership of
+ *      the pointer moves to cfg80211 in the call to
+ *      cfg80211_mlo_reconf_add_done().
+ *
+ * The BSS pointer must be set for each link for which 'add' operation was
+ * requested in the assoc_ml_reconf callback.
+ */
+struct cfg80211_mlo_reconf_done_data {
+	const u8 *buf;
+	size_t len;
+	u16 added_links;
+	struct {
+		struct cfg80211_bss *bss;
+	} links[IEEE80211_MLD_MAX_NUM_LINKS];
+};
+
+/**
+ * cfg80211_mlo_reconf_add_done - Notify about MLO reconfiguration result
+ * @dev: network device.
+ * @data: MLO reconfiguration done data, &struct cfg80211_mlo_reconf_done_data
+ *
+ * Inform cfg80211 and the userspace that processing of ML reconfiguration
+ * request to add links to the association is done.
+ */
+void cfg80211_mlo_reconf_add_done(struct net_device *dev,
+				  struct cfg80211_mlo_reconf_done_data *data);
+
+/**
  * cfg80211_schedule_channels_check - schedule regulatory check if needed
  * @wdev: the wireless device to check
  *
@@ -9714,6 +9774,13 @@ void cfg80211_links_removed(struct net_device *dev, u16 link_mask);
  */
 void cfg80211_schedule_channels_check(struct wireless_dev *wdev);
 
+/**
+ * cfg80211_epcs_changed - Notify about a change in EPCS state
+ * @netdev: the wireless device whose EPCS state changed
+ * @enabled: set to true if EPCS was enabled, otherwise set to false.
+ */
+void cfg80211_epcs_changed(struct net_device *netdev, bool enabled);
+
 #ifdef CONFIG_CFG80211_DEBUGFS
 /**
  * wiphy_locked_debugfs_read - do a locked read in debugfs