Merge tag 'spi-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "This has been a very active release for the DesignWare driver in
  particular - after a long period of inactivity we have had a lot of
  people actively working on it for unrelated reasons this cycle with
  some of that work still not landed.

  Otherwise it's been fairly quiet for the subsystem.

  Highlights include:

   - Lots of performance improvements and fixes for the DesignWare
     driver from Serge Semin, Andy Shevchenko, Wan Ahmad Zainie, Clement
     Leger, Dinh Nguyen and Jarkko Nikula.

   - Support for octal mode transfers in spidev.

   - Slave mode support for the Rockchip drivers.

   - Support for AMD controllers, Broadcom mspi and Raspberry Pi 4, and
     Intel Elkhart Lake"

* tag 'spi-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (125 commits)
  spi: spi-fsl-dspi: fix native data copy
  spi: Convert DW SPI binding to DT schema
  spi: dw: Refactor mid_spi_dma_setup() to separate DMA and IRQ config
  spi: dw: Make DMA request line assignments explicit for Intel Medfield
  spi: bcm2835: Remove shared interrupt support
  dt-bindings: snps,dw-apb-ssi: add optional reset property
  spi: dw: add reset control
  spi: bcm2835: Enable shared interrupt support
  spi: bcm2835: Implement shutdown callback
  spi: dw: Use regset32 DebugFS method to create regdump file
  spi: dw: Add DMA support to the DW SPI MMIO driver
  spi: dw: Cleanup generic DW DMA code namings
  spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
  spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI
  spi: dw: Move Non-DMA code to the DW PCIe-SPI driver
  spi: dw: Add core suffix to the DW APB SSI core source file
  spi: dw: Fix Rx-only DMA transfers
  spi: dw: Use DMA max burst to set the request thresholds
  spi: dw: Parameterize the DMA Rx/Tx burst length
  spi: dw: Add SPI Rx-done wait method to DMA-based transfer
  ...

1 files changed, 9 insertions, 5 deletions

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index c92c89467e7ed..8158e281f3540 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1023,7 +1023,8 @@ static int spi_map_msg(struct spi_controller *ctlr, struct spi_message *msg)
 	void *tmp;
 	unsigned int max_tx, max_rx;
 
-	if (ctlr->flags & (SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX)) {
+	if ((ctlr->flags & (SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX))
+		&& !(msg->spi->mode & SPI_3WIRE)) {
 		max_tx = 0;
 		max_rx = 0;
 
@@ -1075,7 +1076,7 @@ static int spi_transfer_wait(struct spi_controller *ctlr,
 {
 	struct spi_statistics *statm = &ctlr->statistics;
 	struct spi_statistics *stats = &msg->spi->statistics;
-	unsigned long long ms = 1;
+	unsigned long long ms;
 
 	if (spi_controller_is_slave(ctlr)) {
 		if (wait_for_completion_interruptible(&ctlr->xfer_completion)) {
@@ -1160,6 +1161,8 @@ int spi_delay_exec(struct spi_delay *_delay, struct spi_transfer *xfer)
 {
 	int delay;
 
+	might_sleep();
+
 	if (!_delay)
 		return -EINVAL;
 
@@ -2111,6 +2114,7 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
 			}
 
 			lookup->max_speed_hz = sb->connection_speed;
+			lookup->bits_per_word = sb->data_bit_length;
 
 			if (sb->clock_phase == ACPI_SPI_SECOND_PHASE)
 				lookup->mode |= SPI_CPHA;
@@ -2760,6 +2764,8 @@ void spi_unregister_controller(struct spi_controller *ctlr)
 	struct spi_controller *found;
 	int id = ctlr->bus_num;
 
+	device_for_each_child(&ctlr->dev, NULL, __unregister);
+
 	/* First make sure that this controller was ever added */
 	mutex_lock(&board_lock);
 	found = idr_find(&spi_master_idr, id);
@@ -2772,7 +2778,6 @@ void spi_unregister_controller(struct spi_controller *ctlr)
 	list_del(&ctlr->list);
 	mutex_unlock(&board_lock);
 
-	device_for_each_child(&ctlr->dev, NULL, __unregister);
 	device_unregister(&ctlr->dev);
 	/* free bus id */
 	mutex_lock(&board_lock);
@@ -3853,8 +3858,7 @@ static u8	*buf;
  * is zero for success, else a negative errno status code.
  * This call may only be used from a context that may sleep.
  *
- * Parameters to this routine are always copied using a small buffer;
- * portable code should never use this for more than 32 bytes.
+ * Parameters to this routine are always copied using a small buffer.
  * Performance-sensitive or bulk transfer code should instead use
  * spi_{async,sync}() calls with dma-safe buffers.
  *