Merge tag 'spi-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "This has been a very active release for the DesignWare driver in
  particular - after a long period of inactivity we have had a lot of
  people actively working on it for unrelated reasons this cycle with
  some of that work still not landed.

  Otherwise it's been fairly quiet for the subsystem.

  Highlights include:

   - Lots of performance improvements and fixes for the DesignWare
     driver from Serge Semin, Andy Shevchenko, Wan Ahmad Zainie, Clement
     Leger, Dinh Nguyen and Jarkko Nikula.

   - Support for octal mode transfers in spidev.

   - Slave mode support for the Rockchip drivers.

   - Support for AMD controllers, Broadcom mspi and Raspberry Pi 4, and
     Intel Elkhart Lake"

* tag 'spi-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (125 commits)
  spi: spi-fsl-dspi: fix native data copy
  spi: Convert DW SPI binding to DT schema
  spi: dw: Refactor mid_spi_dma_setup() to separate DMA and IRQ config
  spi: dw: Make DMA request line assignments explicit for Intel Medfield
  spi: bcm2835: Remove shared interrupt support
  dt-bindings: snps,dw-apb-ssi: add optional reset property
  spi: dw: add reset control
  spi: bcm2835: Enable shared interrupt support
  spi: bcm2835: Implement shutdown callback
  spi: dw: Use regset32 DebugFS method to create regdump file
  spi: dw: Add DMA support to the DW SPI MMIO driver
  spi: dw: Cleanup generic DW DMA code namings
  spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
  spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI
  spi: dw: Move Non-DMA code to the DW PCIe-SPI driver
  spi: dw: Add core suffix to the DW APB SSI core source file
  spi: dw: Fix Rx-only DMA transfers
  spi: dw: Use DMA max burst to set the request thresholds
  spi: dw: Parameterize the DMA Rx/Tx burst length
  spi: dw: Add SPI Rx-done wait method to DMA-based transfer
  ...

1 files changed, 27 insertions, 4 deletions

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index f4f28a400a968..b7a85e3fe1c16 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -71,6 +71,7 @@ struct spi_imx_devtype_data {
 	void (*reset)(struct spi_imx_data *);
 	void (*setup_wml)(struct spi_imx_data *);
 	void (*disable)(struct spi_imx_data *);
+	void (*disable_dma)(struct spi_imx_data *);
 	bool has_dmamode;
 	bool has_slavemode;
 	unsigned int fifo_size;
@@ -485,6 +486,11 @@ static void mx51_ecspi_trigger(struct spi_imx_data *spi_imx)
 	writel(reg, spi_imx->base + MX51_ECSPI_CTRL);
 }
 
+static void mx51_disable_dma(struct spi_imx_data *spi_imx)
+{
+	writel(0, spi_imx->base + MX51_ECSPI_DMA);
+}
+
 static void mx51_ecspi_disable(struct spi_imx_data *spi_imx)
 {
 	u32 ctrl;
@@ -987,6 +993,7 @@ static struct spi_imx_devtype_data imx51_ecspi_devtype_data = {
 	.rx_available = mx51_ecspi_rx_available,
 	.reset = mx51_ecspi_reset,
 	.setup_wml = mx51_setup_wml,
+	.disable_dma = mx51_disable_dma,
 	.fifo_size = 64,
 	.has_dmamode = true,
 	.dynamic_burst = true,
@@ -1001,6 +1008,7 @@ static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
 	.prepare_transfer = mx51_ecspi_prepare_transfer,
 	.trigger = mx51_ecspi_trigger,
 	.rx_available = mx51_ecspi_rx_available,
+	.disable_dma = mx51_disable_dma,
 	.reset = mx51_ecspi_reset,
 	.fifo_size = 64,
 	.has_dmamode = true,
@@ -1385,6 +1393,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc_tx) {
 		dmaengine_terminate_all(master->dma_tx);
+		dmaengine_terminate_all(master->dma_rx);
 		return -EINVAL;
 	}
 
@@ -1498,6 +1507,7 @@ static int spi_imx_transfer(struct spi_device *spi,
 				struct spi_transfer *transfer)
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
+	int ret;
 
 	/* flush rxfifo before transfer */
 	while (spi_imx->devtype_data->rx_available(spi_imx))
@@ -1506,10 +1516,23 @@ static int spi_imx_transfer(struct spi_device *spi,
 	if (spi_imx->slave_mode)
 		return spi_imx_pio_transfer_slave(spi, transfer);
 
-	if (spi_imx->usedma)
-		return spi_imx_dma_transfer(spi_imx, transfer);
-	else
-		return spi_imx_pio_transfer(spi, transfer);
+	/*
+	 * fallback PIO mode if dma setup error happen, for example sdma
+	 * firmware may not be updated as ERR009165 required.
+	 */
+	if (spi_imx->usedma) {
+		ret = spi_imx_dma_transfer(spi_imx, transfer);
+		if (ret != -EINVAL)
+			return ret;
+
+		spi_imx->devtype_data->disable_dma(spi_imx);
+
+		spi_imx->usedma = false;
+		spi_imx->dynamic_burst = spi_imx->devtype_data->dynamic_burst;
+		dev_dbg(&spi->dev, "Fallback to PIO mode\n");
+	}
+
+	return spi_imx_pio_transfer(spi, transfer);
 }
 
 static int spi_imx_setup(struct spi_device *spi)