Merge series "Support ROHM BD9576MUF and BD9573MUF PMICs" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:

Initial support for ROHM BD9576MUF and BD9573MUF PMICs.

These PMICs are primarily intended to be used to power the R-Car family
processors. BD9576MUF includes some additional safety features the
BD9573MUF does not have. This initial version of drivers does not
utilize these features and for now the SW behaviour is identical.

Please note that this version of drivers is only tested on BD9576MUF
but according to the data-sheets the relevant parts of registers should
be same so drivers should also work on BD9573MUF.

This patch series includes MFD, watchdog and regulator drivers with
basic functionality such as:

- Enabling and pinging the watchdog
- configuring watchog timeout / window from device-tree
- reading regulator states/voltages
- enabling/disabling VOUT1 (VD50) when control mode B is used.

This patch series does not bring interrupt support. BD9576MUF and BD9573MUF
are designed to keep the IRQ line low for whole duration of error
condition. IRQ can't be 'acked'. So proper IRQ support would require
some IRQ limiter implementation (delayed unmask?) in order to not hog
the CPU.

---

Matti Vaittinen (6):
  dt_bindings: mfd: Add ROHM BD9576MUF and BD9573MUF PMICs
  dt_bindings: regulator: Add ROHM BD9576MUF and BD9573MUF PMICs
  mfd: Support ROHM BD9576MUF and BD9573MUF
  wdt: Support wdt on ROHM BD9576MUF and BD9573MUF
  regulator: Support ROHM BD9576MUF and BD9573MUF
  MAINTAINERS: Add ROHM BD9576MUF and BD9573MUF drivers

 .../bindings/mfd/rohm,bd9576-pmic.yaml        | 129 +++++++
 .../regulator/rohm,bd9576-regulator.yaml      |  33 ++
 MAINTAINERS                                   |   4 +
 drivers/mfd/Kconfig                           |  11 +
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/rohm-bd9576.c                     | 130 +++++++
 drivers/regulator/Kconfig                     |  10 +
 drivers/regulator/Makefile                    |   1 +
 drivers/regulator/bd9576-regulator.c          | 337 ++++++++++++++++++
 drivers/watchdog/Kconfig                      |  13 +
 drivers/watchdog/Makefile                     |   1 +
 drivers/watchdog/bd9576_wdt.c                 | 295 +++++++++++++++
 include/linux/mfd/rohm-bd957x.h               |  61 ++++
 include/linux/mfd/rohm-generic.h              |   2 +
 14 files changed, 1028 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml
 create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
 create mode 100644 drivers/mfd/rohm-bd9576.c
 create mode 100644 drivers/regulator/bd9576-regulator.c
 create mode 100644 drivers/watchdog/bd9576_wdt.c
 create mode 100644 include/linux/mfd/rohm-bd957x.h

base-commit: f4d51dffc6c01a9e94650d95ce0104964f8ae822
--
2.21.0

--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]

1 files changed, 14 insertions, 14 deletions

diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 927b1e641842..7d3571a2bd89 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -599,7 +599,7 @@ int scsi_check_sense(struct scsi_cmnd *scmd)
 			set_host_byte(scmd, DID_ALLOC_FAILURE);
 			return SUCCESS;
 		}
-		/* FALLTHROUGH */
+		fallthrough;
 	case COPY_ABORTED:
 	case VOLUME_OVERFLOW:
 	case MISCOMPARE:
@@ -621,7 +621,7 @@ int scsi_check_sense(struct scsi_cmnd *scmd)
 			return ADD_TO_MLQUEUE;
 		else
 			set_host_byte(scmd, DID_TARGET_FAILURE);
-		/* FALLTHROUGH */
+		fallthrough;
 
 	case ILLEGAL_REQUEST:
 		if (sshdr.asc == 0x20 || /* Invalid command operation code */
@@ -734,7 +734,7 @@ static int scsi_eh_completed_normally(struct scsi_cmnd *scmd)
 	switch (status_byte(scmd->result)) {
 	case GOOD:
 		scsi_handle_queue_ramp_up(scmd->device);
-		/* FALLTHROUGH */
+		fallthrough;
 	case COMMAND_TERMINATED:
 		return SUCCESS;
 	case CHECK_CONDITION:
@@ -755,7 +755,7 @@ static int scsi_eh_completed_normally(struct scsi_cmnd *scmd)
 		return FAILED;
 	case QUEUE_FULL:
 		scsi_handle_queue_full(scmd->device);
-		/* fall through */
+		fallthrough;
 	case BUSY:
 		return NEEDS_RETRY;
 	default:
@@ -1302,7 +1302,7 @@ retry_tur:
 	case NEEDS_RETRY:
 		if (retry_cnt--)
 			goto retry_tur;
-		/*FALLTHRU*/
+		fallthrough;
 	case SUCCESS:
 		return 0;
 	default:
@@ -1739,7 +1739,7 @@ int scsi_noretry_cmd(struct scsi_cmnd *scmd)
 		if (msg_byte(scmd->result) == COMMAND_COMPLETE &&
 		    status_byte(scmd->result) == RESERVATION_CONFLICT)
 			return 0;
-		/* fall through */
+		fallthrough;
 	case DID_SOFT_ERROR:
 		return (scmd->request->cmd_flags & REQ_FAILFAST_DRIVER);
 	}
@@ -1810,7 +1810,7 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd)
 			set_host_byte(scmd, DID_TIME_OUT);
 			return SUCCESS;
 		}
-		/* FALLTHROUGH */
+		fallthrough;
 	case DID_NO_CONNECT:
 	case DID_BAD_TARGET:
 		/*
@@ -1854,7 +1854,7 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd)
 			 * lower down
 			 */
 			break;
-		/* fallthrough */
+		fallthrough;
 	case DID_BUS_BUSY:
 	case DID_PARITY:
 		goto maybe_retry;
@@ -1892,7 +1892,7 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd)
 		 * the case of trying to send too many commands to a
 		 * tagged queueing device.
 		 */
-		/* FALLTHROUGH */
+		fallthrough;
 	case BUSY:
 		/*
 		 * device can't talk to us at the moment.  Should only
@@ -1905,7 +1905,7 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd)
 		if (scmd->cmnd[0] == REPORT_LUNS)
 			scmd->device->sdev_target->expecting_lun_change = 0;
 		scsi_handle_queue_ramp_up(scmd->device);
-		/* FALLTHROUGH */
+		fallthrough;
 	case COMMAND_TERMINATED:
 		return SUCCESS;
 	case TASK_ABORTED:
@@ -2376,22 +2376,22 @@ scsi_ioctl_reset(struct scsi_device *dev, int __user *arg)
 		rtn = scsi_try_bus_device_reset(scmd);
 		if (rtn == SUCCESS || (val & SG_SCSI_RESET_NO_ESCALATE))
 			break;
-		/* FALLTHROUGH */
+		fallthrough;
 	case SG_SCSI_RESET_TARGET:
 		rtn = scsi_try_target_reset(scmd);
 		if (rtn == SUCCESS || (val & SG_SCSI_RESET_NO_ESCALATE))
 			break;
-		/* FALLTHROUGH */
+		fallthrough;
 	case SG_SCSI_RESET_BUS:
 		rtn = scsi_try_bus_reset(scmd);
 		if (rtn == SUCCESS || (val & SG_SCSI_RESET_NO_ESCALATE))
 			break;
-		/* FALLTHROUGH */
+		fallthrough;
 	case SG_SCSI_RESET_HOST:
 		rtn = scsi_try_host_reset(scmd);
 		if (rtn == SUCCESS)
 			break;
-		/* FALLTHROUGH */
+		fallthrough;
 	default:
 		rtn = FAILED;
 		break;