Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr,
  mpt3sas) and the removal of cxlflash.

  The only non-trivial core change is an addition to unit attention
  handling to recognize UAs for power on/reset and new media so the tape
  driver can use it"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (107 commits)
  scsi: st: Tighten the page format heuristics with MODE SELECT
  scsi: st: ERASE does not change tape location
  scsi: st: Fix array overflow in st_setup()
  scsi: target: tcm_loop: Fix wrong abort tag
  scsi: lpfc: Restore clearing of NLP_UNREG_INP in ndlp->nlp_flag
  scsi: hisi_sas: Fixed failure to issue vendor specific commands
  scsi: fnic: Remove unnecessary NUL-terminations
  scsi: fnic: Remove redundant flush_workqueue() calls
  scsi: core: Use a switch statement when attaching VPD pages
  scsi: ufs: renesas: Add initialization code for R-Car S4-8 ES1.2
  scsi: ufs: renesas: Add reusable functions
  scsi: ufs: renesas: Refactor 0x10ad/0x10af PHY settings
  scsi: ufs: renesas: Remove register control helper function
  scsi: ufs: renesas: Add register read to remove save/set/restore
  scsi: ufs: renesas: Replace init data by init code
  scsi: ufs: dt-bindings: renesas,ufs: Add calibration data
  scsi: mpi3mr: Task Abort EH Support
  scsi: storvsc: Don't report the host packet status as the hv status
  scsi: isci: Make most module parameters static
  scsi: megaraid_sas: Make most module parameters static
  ...

1 files changed, 8 insertions, 6 deletions

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 919bf9b7ac26..7238608ca49f 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2017-2024 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2025 Broadcom. All Rights Reserved. The term *
  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.  *
  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
@@ -595,7 +595,7 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 	/* Set up ring-0 (ELS) timer */
 	timeout = phba->fc_ratov * 2;
 	mod_timer(&vport->els_tmofunc,
-		  jiffies + msecs_to_jiffies(1000 * timeout));
+		  jiffies + secs_to_jiffies(timeout));
 	/* Set up heart beat (HB) timer */
 	mod_timer(&phba->hb_tmofunc,
 		  jiffies + secs_to_jiffies(LPFC_HB_MBOX_INTERVAL));
@@ -604,7 +604,7 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 	phba->last_completion_time = jiffies;
 	/* Set up error attention (ERATT) polling timer */
 	mod_timer(&phba->eratt_poll,
-		  jiffies + msecs_to_jiffies(1000 * phba->eratt_poll_interval));
+		  jiffies + secs_to_jiffies(phba->eratt_poll_interval));
 
 	if (test_bit(LINK_DISABLED, &phba->hba_flag)) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
@@ -3361,8 +3361,8 @@ lpfc_block_mgmt_io(struct lpfc_hba *phba, int mbx_action)
 		/* Determine how long we might wait for the active mailbox
 		 * command to be gracefully completed by firmware.
 		 */
-		timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
-				phba->sli.mbox_active) * 1000) + jiffies;
+		timeout = secs_to_jiffies(lpfc_mbox_tmo_val(phba,
+				phba->sli.mbox_active)) + jiffies;
 	}
 	spin_unlock_irqrestore(&phba->hbalock, iflag);
 
@@ -6909,7 +6909,7 @@ lpfc_sli4_async_fip_evt(struct lpfc_hba *phba,
 			 * re-instantiate the Vlink using FDISC.
 			 */
 			mod_timer(&ndlp->nlp_delayfunc,
-				  jiffies + msecs_to_jiffies(1000));
+				  jiffies + secs_to_jiffies(1));
 			set_bit(NLP_DELAY_TMO, &ndlp->nlp_flag);
 			ndlp->nlp_last_elscmd = ELS_CMD_FDISC;
 			vport->port_state = LPFC_FDISC;
@@ -13169,6 +13169,7 @@ lpfc_sli4_enable_msi(struct lpfc_hba *phba)
 	eqhdl = lpfc_get_eq_hdl(0);
 	rc = pci_irq_vector(phba->pcidev, 0);
 	if (rc < 0) {
+		free_irq(phba->pcidev->irq, phba);
 		pci_free_irq_vectors(phba->pcidev);
 		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
 				"0496 MSI pci_irq_vec failed (%d)\n", rc);
@@ -13249,6 +13250,7 @@ lpfc_sli4_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
 			eqhdl = lpfc_get_eq_hdl(0);
 			retval = pci_irq_vector(phba->pcidev, 0);
 			if (retval < 0) {
+				free_irq(phba->pcidev->irq, phba);
 				lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
 					"0502 INTR pci_irq_vec failed (%d)\n",
 					 retval);