Add bridged amplifiers to cs42l43

Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:

In some cs42l43 systems a couple of cs35l56 amplifiers are attached
to the cs42l43's SPI and I2S. On Windows the cs42l43 is controlled
by a SDCA class driver and these two amplifiers are controlled by
firmware running on the cs42l43. However, under Linux the decision
was made to interact with the cs42l43 directly, affording the user
greater control over the audio system. However, this has resulted
in an issue where these two bridged cs35l56 amplifiers are not
populated in ACPI and must be added manually. There is at least an
SDCA extension unit DT entry we can key off.

The process of adding this is handled using a software node, firstly the
ability to add native chip selects to software nodes must be added.
Secondly, an additional flag for naming the SPI devices is added this
allows the machine driver to key to the correct amplifier. Then finally,
the cs42l43 SPI driver adds the two amplifiers directly onto its SPI
bus.

An additional series will follow soon to add the audio machine driver
parts (in the sof-sdw driver), however that is fairly orthogonal to
this part of the process, getting the actual amplifiers registered.

1 files changed, 10 insertions, 10 deletions

diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c
index 1befcd5b2a0f9..fa07a6f54003e 100644
--- a/drivers/scsi/ch.c
+++ b/drivers/scsi/ch.c
@@ -102,7 +102,9 @@ do {									\
 
 #define MAX_RETRIES   1
 
-static struct class * ch_sysfs_class;
+static const struct class ch_sysfs_class = {
+	.name = "scsi_changer",
+};
 
 typedef struct {
 	struct kref         ref;
@@ -930,7 +932,7 @@ static int ch_probe(struct device *dev)
 	mutex_init(&ch->lock);
 	kref_init(&ch->ref);
 	ch->device = sd;
-	class_dev = device_create(ch_sysfs_class, dev,
+	class_dev = device_create(&ch_sysfs_class, dev,
 				  MKDEV(SCSI_CHANGER_MAJOR, ch->minor), ch,
 				  "s%s", ch->name);
 	if (IS_ERR(class_dev)) {
@@ -955,7 +957,7 @@ static int ch_probe(struct device *dev)
 
 	return 0;
 destroy_dev:
-	device_destroy(ch_sysfs_class, MKDEV(SCSI_CHANGER_MAJOR, ch->minor));
+	device_destroy(&ch_sysfs_class, MKDEV(SCSI_CHANGER_MAJOR, ch->minor));
 put_device:
 	scsi_device_put(sd);
 remove_idr:
@@ -974,7 +976,7 @@ static int ch_remove(struct device *dev)
 	dev_set_drvdata(dev, NULL);
 	spin_unlock(&ch_index_lock);
 
-	device_destroy(ch_sysfs_class, MKDEV(SCSI_CHANGER_MAJOR,ch->minor));
+	device_destroy(&ch_sysfs_class, MKDEV(SCSI_CHANGER_MAJOR, ch->minor));
 	scsi_device_put(ch->device);
 	kref_put(&ch->ref, ch_destroy);
 	return 0;
@@ -1003,11 +1005,9 @@ static int __init init_ch_module(void)
 	int rc;
 
 	printk(KERN_INFO "SCSI Media Changer driver v" VERSION " \n");
-        ch_sysfs_class = class_create("scsi_changer");
-        if (IS_ERR(ch_sysfs_class)) {
-		rc = PTR_ERR(ch_sysfs_class);
+	rc = class_register(&ch_sysfs_class);
+	if (rc)
 		return rc;
-        }
 	rc = register_chrdev(SCSI_CHANGER_MAJOR,"ch",&changer_fops);
 	if (rc < 0) {
 		printk("Unable to get major %d for SCSI-Changer\n",
@@ -1022,7 +1022,7 @@ static int __init init_ch_module(void)
  fail2:
 	unregister_chrdev(SCSI_CHANGER_MAJOR, "ch");
  fail1:
-	class_destroy(ch_sysfs_class);
+	class_unregister(&ch_sysfs_class);
 	return rc;
 }
 
@@ -1030,7 +1030,7 @@ static void __exit exit_ch_module(void)
 {
 	scsi_unregister_driver(&ch_template.gendrv);
 	unregister_chrdev(SCSI_CHANGER_MAJOR, "ch");
-	class_destroy(ch_sysfs_class);
+	class_unregister(&ch_sysfs_class);
 	idr_destroy(&ch_index_idr);
 }