Merge v6.16.8linux-rolling-stable

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 files changed, 52 insertions, 9 deletions

diff --git a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
index d7493c2294ef..3709fba42ebd 100644
--- a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
+++ b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
@@ -127,13 +127,13 @@ static int eusb2_repeater_init(struct phy *phy)
 			     rptr->cfg->init_tbl[i].value);
 
 	/* Override registers from devicetree values */
-	if (!of_property_read_u8(np, "qcom,tune-usb2-amplitude", &val))
+	if (!of_property_read_u8(np, "qcom,tune-usb2-preem", &val))
 		regmap_write(regmap, base + EUSB2_TUNE_USB2_PREEM, val);
 
 	if (!of_property_read_u8(np, "qcom,tune-usb2-disc-thres", &val))
 		regmap_write(regmap, base + EUSB2_TUNE_HSDISC, val);
 
-	if (!of_property_read_u8(np, "qcom,tune-usb2-preem", &val))
+	if (!of_property_read_u8(np, "qcom,tune-usb2-amplitude", &val))
 		regmap_write(regmap, base + EUSB2_TUNE_IUSB2, val);
 
 	/* Wait for status OK */
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 461b9e0af610..498f23c43aa1 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -3064,6 +3064,14 @@ struct qmp_pcie {
 	struct clk_fixed_rate aux_clk_fixed;
 };
 
+static bool qphy_checkbits(const void __iomem *base, u32 offset, u32 val)
+{
+	u32 reg;
+
+	reg = readl(base + offset);
+	return (reg & val) == val;
+}
+
 static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
 {
 	u32 reg;
@@ -4332,16 +4340,21 @@ static int qmp_pcie_init(struct phy *phy)
 	struct qmp_pcie *qmp = phy_get_drvdata(phy);
 	const struct qmp_phy_cfg *cfg = qmp->cfg;
 	void __iomem *pcs = qmp->pcs;
-	bool phy_initialized = !!(readl(pcs + cfg->regs[QPHY_START_CTRL]));
 	int ret;
 
-	qmp->skip_init = qmp->nocsr_reset && phy_initialized;
 	/*
-	 * We need to check the existence of init sequences in two cases:
-	 * 1. The PHY doesn't support no_csr reset.
-	 * 2. The PHY supports no_csr reset but isn't initialized by bootloader.
-	 * As we can't skip init in these two cases.
+	 * We can skip PHY initialization if all of the following conditions
+	 * are met:
+	 *  1. The PHY supports the nocsr_reset that preserves the PHY config.
+	 *  2. The PHY was started (and not powered down again) by the
+	 *     bootloader, with all of the expected bits set correctly.
+	 * In this case, we can continue without having the init sequence
+	 * defined in the driver.
 	 */
+	qmp->skip_init = qmp->nocsr_reset &&
+		qphy_checkbits(pcs, cfg->regs[QPHY_START_CTRL], SERDES_START | PCS_START) &&
+		qphy_checkbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], cfg->pwrdn_ctrl);
+
 	if (!qmp->skip_init && !cfg->tbls.serdes_num) {
 		dev_err(qmp->dev, "Init sequence not available\n");
 		return -ENODATA;
diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index ebc8a7e21a31..3409924498e9 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -3164,18 +3164,22 @@ tegra210_xusb_padctl_probe(struct device *dev,
 	}
 
 	pdev = of_find_device_by_node(np);
+	of_node_put(np);
 	if (!pdev) {
 		dev_warn(dev, "PMC device is not available\n");
 		goto out;
 	}
 
-	if (!platform_get_drvdata(pdev))
+	if (!platform_get_drvdata(pdev)) {
+		put_device(&pdev->dev);
 		return ERR_PTR(-EPROBE_DEFER);
+	}
 
 	padctl->regmap = dev_get_regmap(&pdev->dev, "usb_sleepwalk");
 	if (!padctl->regmap)
 		dev_info(dev, "failed to find PMC regmap\n");
 
+	put_device(&pdev->dev);
 out:
 	return &padctl->base;
 }
diff --git a/drivers/phy/ti/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
index c1a0ef979142..c444bb2530ca 100644
--- a/drivers/phy/ti/phy-omap-usb2.c
+++ b/drivers/phy/ti/phy-omap-usb2.c
@@ -363,6 +363,13 @@ static void omap_usb2_init_errata(struct omap_usb *phy)
 		phy->flags |= OMAP_USB2_DISABLE_CHRG_DET;
 }
 
+static void omap_usb2_put_device(void *_dev)
+{
+	struct device *dev = _dev;
+
+	put_device(dev);
+}
+
 static int omap_usb2_probe(struct platform_device *pdev)
 {
 	struct omap_usb	*phy;
@@ -373,6 +380,7 @@ static int omap_usb2_probe(struct platform_device *pdev)
 	struct device_node *control_node;
 	struct platform_device *control_pdev;
 	const struct usb_phy_data *phy_data;
+	int ret;
 
 	phy_data = device_get_match_data(&pdev->dev);
 	if (!phy_data)
@@ -423,6 +431,11 @@ static int omap_usb2_probe(struct platform_device *pdev)
 			return -EINVAL;
 		}
 		phy->control_dev = &control_pdev->dev;
+
+		ret = devm_add_action_or_reset(&pdev->dev, omap_usb2_put_device,
+					       phy->control_dev);
+		if (ret)
+			return ret;
 	} else {
 		if (of_property_read_u32_index(node,
 					       "syscon-phy-power", 1,
diff --git a/drivers/phy/ti/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c
index da2cbacb982c..ae764d6524c9 100644
--- a/drivers/phy/ti/phy-ti-pipe3.c
+++ b/drivers/phy/ti/phy-ti-pipe3.c
@@ -667,12 +667,20 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
 	return 0;
 }
 
+static void ti_pipe3_put_device(void *_dev)
+{
+	struct device *dev = _dev;
+
+	put_device(dev);
+}
+
 static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy)
 {
 	struct device *dev = phy->dev;
 	struct device_node *node = dev->of_node;
 	struct device_node *control_node;
 	struct platform_device *control_pdev;
+	int ret;
 
 	phy->phy_power_syscon = syscon_regmap_lookup_by_phandle(node,
 							"syscon-phy-power");
@@ -704,6 +712,11 @@ static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy)
 		}
 
 		phy->control_dev = &control_pdev->dev;
+
+		ret = devm_add_action_or_reset(dev, ti_pipe3_put_device,
+					       phy->control_dev);
+		if (ret)
+			return ret;
 	}
 
 	if (phy->mode == PIPE3_MODE_PCIE) {