Merge tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
     take config space accessor functions.

     Implement pci_find_capability(), pci_find_ext_capability(), and
     dwc, dwc endpoint, and cadence capability search interfaces with
     them (Hans Zhang)

   - Leave parent unit address 0 in 'interrupt-map' so that when we
     build devicetree nodes to describe PCI functions that contain
     multiple peripherals, we can build this property even when
     interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)

   - Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
     Request Size to 128B to avoid a performance issue (Ilpo Järvinen)

   - Add sysfs 'serial_number' file to expose the Device Serial Number
     (Matthew Wood)

   - Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)

  Resource management:

   - Align m68k pcibios_enable_device() with other arches (Ilpo
     Järvinen)

   - Remove sparc pcibios_enable_device() implementations that don't do
     anything beyond what pci_enable_resources() does (Ilpo Järvinen)

   - Remove mips pcibios_enable_resources() and use
     pci_enable_resources() instead (Ilpo Järvinen)

   - Clean up bridge window sizing and assignment (Ilpo Järvinen),
     including:

       - Leave non-claimed bridge windows disabled

       - Enable bridges even if a window wasn't assigned because not all
         windows are required by downstream devices

       - Preserve bridge window type when releasing the resource, since
         the type is needed for reassignment

       - Consolidate selection of bridge windows into two new
         interfaces, pbus_select_window() and
         pbus_select_window_for_type(), so this is done consistently

       - Compute bridge window start and end earlier to avoid logging
         stale information

  MSI:

   - Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
     Vives)

  Error handling:

   - Align AER with EEH by allowing drivers to request a Bus Reset on
     Non-Fatal Errors (in addition to the reset on Fatal Errors that we
     already do) (Lukas Wunner)

   - If error recovery fails, emit FAILED_RECOVERY uevents for the
     devices, not for the bridge leading to them.

     This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)

   - Align AER with EEH by calling err_handler.error_detected()
     callbacks to notify drivers if error recovery fails (Lukas Wunner)

   - Align AER with EEH by restoring device error_state to
     pci_channel_io_normal before the err_handler.slot_reset() callback.

     This is earlier than before the err_handler.resume() callback
     (Lukas Wunner)

   - Emit a BEGIN_RECOVERY uevent when driver's
     err_handler.error_detected() requests a reset, as well as when it
     says recovery is complete or can be done without a reset (Niklas
     Schnelle)

   - Align s390 with AER and EEH by emitting uevents during error
     recovery (Niklas Schnelle)

   - Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
     SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
     result of err_handler.error_detected() (Niklas Schnelle)

   - Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
     error information identifies a device without an AER Capability
     (Breno Leitao)

   - Update error decoding and TLP Log printing for new errors in
     current PCIe base spec (Lukas Wunner)

   - Update error recovery documentation to match the current code
     and use consistent nomenclature (Lukas Wunner)

  ASPM:

   - Enable all ClockPM and ASPM states for devicetree platforms, since
     there's typically no firmware that enables ASPM

     This is a risky change that may uncover hardware or configuration
     defects at boot-time rather than when users enable ASPM via sysfs
     later. Booting with "pcie_aspm=off" prevents this enabling
     (Manivannan Sadhasivam)

   - Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)

  Power management:

   - If a device has already been disconnected, e.g., by a hotplug
     removal, don't bother trying to resume it to D0 when detaching the
     driver.

     This avoids annoying "Unable to change power state from D3cold to
     D0" messages (Mario Limonciello)

   - Ensure devices are powered up before config reads for
     'max_link_width', 'current_link_speed', 'current_link_width',
     'secondary_bus_number', and 'subordinate_bus_number' sysfs files.

     This prevents using invalid data (~0) in drivers or lspci and,
     depending on how the PCIe controller reports errors, may avoid
     error interrupts or crashes (Brian Norris)

  Virtualization:

   - Add rescan/remove locking when enabling/disabling SR-IOV, which
     avoids list corruption on s390, where disabling SR-IOV also
     generates hotplug events (Niklas Schnelle)

  Peer-to-peer DMA:

   - Free struct p2p_pgmap, not a member within it, in the
     pci_p2pdma_add_resource() error path (Sungho Kim)

  Endpoint framework:

   - Document sysfs interface for BAR assignment of vNTB endpoint
     functions (Jerome Brunet)

   - Fix array underflow in endpoint BAR test case (Dan Carpenter)

   - Skip endpoint IRQ test if the IRQ is out of range to avoid false
     errors (Christian Bruel)

   - Fix endpoint test case for controllers with fixed-size BARs smaller
     than requested by the test (Marek Vasut)

   - Restore inbound translation when disabling doorbell so the endpoint
     doorbell test case can be run more than once (Niklas Cassel)

   - Avoid a NULL pointer dereference when releasing DMA channels in
     endpoint DMA test case (Shin'ichiro Kawasaki)

   - Convert tegra194 interrupt number to MSI vector to fix endpoint
     Kselftest MSI_TEST test case (Niklas Cassel)

   - Reset tegra194 BARs when running in endpoint mode so the BAR tests
     don't overwrite the ATU settings in BAR4 (Niklas Cassel)

   - Handle errors in tegra194 BPMP transactions so we don't mistakenly
     skip future PERST# assertion (Vidya Sagar)

  AMD MDB PCIe controller driver:

   - Update DT binding example to separate PERST# to a Root Port stanza
     to make multiple Root Ports possible in the future (Sai Krishna
     Musham)

   - Add driver support for PERST# being described in a Root Port
     stanza, falling back to the host bridge if not found there (Sai
     Krishna Musham)

  Freescale i.MX6 PCIe controller driver:

   - Enable the 3.3V Vaux supply if available so devices can request
     wakeup with either Beacon or WAKE# (Richard Zhu)

  MediaTek PCIe Gen3 controller driver:

   - Add optional sys clock ready time setting to avoid sys_clk_rdy
     signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)

   - Add DT binding and driver support for MT6991 and MT8196
     (AngeloGioacchino Del Regno)

  NVIDIA Tegra PCIe controller driver:

   - When asserting PERST#, disable the controller instead of mistakenly
     disabling the PLL twice (Nagarjuna Kristam)

   - Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
     nesting error (Marek Vasut)

  Qualcomm PCIe controller driver:

   - Select PCI Power Control Slot driver so slot voltage rails can be
     turned on/off if described in Root Port devicetree node (Qiang Yu)

   - Parse only PCI bridge child nodes in devicetree, skipping unrelated
     nodes such as OPP (Operating Performance Points), which caused
     probe failures (Krishna Chaitanya Chundru)

   - Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)

   - Consolidate Root Port 'phy' and 'reset' properties in struct
     qcom_pcie_port, regardless of whether we got them from the Root
     Port node or the host bridge node (Manivannan Sadhasivam)

   - Fetch and map the ELBI register space in the DWC core rather than
     in each driver individually (Krishna Chaitanya Chundru)

   - Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
     Shift Feature' and use this in the qcom driver (Krishna Chaitanya
     Chundru)

   - Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
     Chundru)

   - Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
     Glymur, which is compatible with X1E80100 but doesn't have the
     cnoc_sf_axi clock (Qiang Yu)

  Renesas R-Car PCIe controller driver:

   - Fix a typo that prevented correct PHY initialization (Marek Vasut)

   - Add a missing 1ms delay after PWR reset assertion as required by
     the V4H manual (Marek Vasut)

   - Assure reset has completed before DBI access to avoid SError (Marek
     Vasut)

   - Fix inverted PHY initialization check, which sometimes led to
     timeouts and failure to start the controller (Marek Vasut)

   - Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
     regression when converting to msi_create_parent_irq_domain()
     (Claudiu Beznea)

   - Drop the spinlock protecting the PMSR register - it's no longer
     required since pci_lock already serializes accesses (Marek Vasut)

   - Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
     nesting error (Marek Vasut)

  SOPHGO PCIe controller driver:

   - Check for existence of struct cdns_pcie.ops before using it to
     allow Cadence drivers that don't need to supply ops (Chen Wang)

   - Add DT binding and driver for the SOPHGO SG2042 PCIe controller
     (Chen Wang)

  STMicroelectronics STM32MP25 PCIe controller driver:

   - Update pinctrl documentation of initial states and use in runtime
     suspend/resume (Christian Bruel)

   - Add pinctrl_pm_select_init_state() for use by stm32 driver, which
     needs it during resume (Christian Bruel)

   - Add devicetree bindings and drivers for the STMicroelectronics
     STM32MP25 in host and endpoint modes (Christian Bruel)

  Synopsys DesignWare PCIe controller driver:

   - Add support for x16 in devicetree 'num-lanes' property (Konrad
     Dybcio)

   - Verify that if DT specifies a single IRQ for all eDMA channels, it
     is named 'dma' (Niklas Cassel)

  TI J721E PCIe driver:

   - Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
     Vadapalli)

   - Power controller off before configuring the glue layer so the
     controller latches the correct values on power-on (Siddharth
     Vadapalli)

  TI Keystone PCIe controller driver:

   - Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
     exits with error (Siddharth Vadapalli)

   - Add Peripheral Virtualization Unit (PVU), which restricts DMA from
     PCIe devices to specific regions of host memory, to the ti,am65
     binding (Jan Kiszka)

  Xilinx NWL PCIe controller driver:

   - Clear bootloader E_ECAM_CONTROL before merging in the new driver
     value to avoid writing invalid values (Jani Nurminen)"

* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
  PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
  MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
  PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
  dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
  PCI: stm32: Add PCIe host support for STM32MP25
  PCI: xilinx-nwl: Fix ECAM programming
  PCI: j721e: Fix incorrect error message in probe()
  PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
  dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
  PCI: dwc: Support 16-lane operation
  PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
  PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
  PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
  PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
  PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
  PCI: rcar-gen4: Fix inverted break condition in PHY initialization
  PCI: rcar-gen4: Assure reset occurs before DBI access
  PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
  PCI: Set up bridge resources earlier
  PCI: rcar-host: Drop PMSR spinlock
  ...

1 files changed, 358 insertions, 0 deletions

diff --git a/drivers/pci/controller/dwc/pcie-stm32.c b/drivers/pci/controller/dwc/pcie-stm32.c
new file mode 100644
index 000000000000..96a5fb893af4
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-stm32.c
@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics STM32MP25 PCIe root complex driver.
+ *
+ * Copyright (C) 2025 STMicroelectronics
+ * Author: Christian Bruel <christian.bruel@foss.st.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include "pcie-designware.h"
+#include "pcie-stm32.h"
+#include "../../pci.h"
+
+struct stm32_pcie {
+	struct dw_pcie pci;
+	struct regmap *regmap;
+	struct reset_control *rst;
+	struct phy *phy;
+	struct clk *clk;
+	struct gpio_desc *perst_gpio;
+	struct gpio_desc *wake_gpio;
+};
+
+static void stm32_pcie_deassert_perst(struct stm32_pcie *stm32_pcie)
+{
+	if (stm32_pcie->perst_gpio) {
+		msleep(PCIE_T_PVPERL_MS);
+		gpiod_set_value(stm32_pcie->perst_gpio, 0);
+	}
+
+	msleep(PCIE_RESET_CONFIG_WAIT_MS);
+}
+
+static void stm32_pcie_assert_perst(struct stm32_pcie *stm32_pcie)
+{
+	gpiod_set_value(stm32_pcie->perst_gpio, 1);
+}
+
+static int stm32_pcie_start_link(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+
+	return regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+				  STM32MP25_PCIECR_LTSSM_EN,
+				  STM32MP25_PCIECR_LTSSM_EN);
+}
+
+static void stm32_pcie_stop_link(struct dw_pcie *pci)
+{
+	struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
+
+	regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+			   STM32MP25_PCIECR_LTSSM_EN, 0);
+}
+
+static int stm32_pcie_suspend_noirq(struct device *dev)
+{
+	struct stm32_pcie *stm32_pcie = dev_get_drvdata(dev);
+	int ret;
+
+	ret = dw_pcie_suspend_noirq(&stm32_pcie->pci);
+	if (ret)
+		return ret;
+
+	stm32_pcie_assert_perst(stm32_pcie);
+
+	clk_disable_unprepare(stm32_pcie->clk);
+
+	if (!device_wakeup_path(dev))
+		phy_exit(stm32_pcie->phy);
+
+	return pinctrl_pm_select_sleep_state(dev);
+}
+
+static int stm32_pcie_resume_noirq(struct device *dev)
+{
+	struct stm32_pcie *stm32_pcie = dev_get_drvdata(dev);
+	int ret;
+
+	/*
+	 * The core clock is gated with CLKREQ# from the COMBOPHY REFCLK,
+	 * thus if no device is present, must deassert it with a GPIO from
+	 * pinctrl pinmux before accessing the DBI registers.
+	 */
+	ret = pinctrl_pm_select_init_state(dev);
+	if (ret) {
+		dev_err(dev, "Failed to activate pinctrl pm state: %d\n", ret);
+		return ret;
+	}
+
+	if (!device_wakeup_path(dev)) {
+		ret = phy_init(stm32_pcie->phy);
+		if (ret) {
+			pinctrl_pm_select_default_state(dev);
+			return ret;
+		}
+	}
+
+	ret = clk_prepare_enable(stm32_pcie->clk);
+	if (ret)
+		goto err_phy_exit;
+
+	stm32_pcie_deassert_perst(stm32_pcie);
+
+	ret = dw_pcie_resume_noirq(&stm32_pcie->pci);
+	if (ret)
+		goto err_disable_clk;
+
+	pinctrl_pm_select_default_state(dev);
+
+	return 0;
+
+err_disable_clk:
+	stm32_pcie_assert_perst(stm32_pcie);
+	clk_disable_unprepare(stm32_pcie->clk);
+
+err_phy_exit:
+	phy_exit(stm32_pcie->phy);
+	pinctrl_pm_select_default_state(dev);
+
+	return ret;
+}
+
+static const struct dev_pm_ops stm32_pcie_pm_ops = {
+	NOIRQ_SYSTEM_SLEEP_PM_OPS(stm32_pcie_suspend_noirq,
+				  stm32_pcie_resume_noirq)
+};
+
+static const struct dw_pcie_host_ops stm32_pcie_host_ops = {
+};
+
+static const struct dw_pcie_ops dw_pcie_ops = {
+	.start_link = stm32_pcie_start_link,
+	.stop_link = stm32_pcie_stop_link
+};
+
+static int stm32_add_pcie_port(struct stm32_pcie *stm32_pcie)
+{
+	struct device *dev = stm32_pcie->pci.dev;
+	unsigned int wake_irq;
+	int ret;
+
+	ret = phy_set_mode(stm32_pcie->phy, PHY_MODE_PCIE);
+	if (ret)
+		return ret;
+
+	ret = phy_init(stm32_pcie->phy);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(stm32_pcie->regmap, SYSCFG_PCIECR,
+				 STM32MP25_PCIECR_TYPE_MASK,
+				 STM32MP25_PCIECR_RC);
+	if (ret)
+		goto err_phy_exit;
+
+	stm32_pcie_deassert_perst(stm32_pcie);
+
+	if (stm32_pcie->wake_gpio) {
+		wake_irq = gpiod_to_irq(stm32_pcie->wake_gpio);
+		ret = dev_pm_set_dedicated_wake_irq(dev, wake_irq);
+		if (ret) {
+			dev_err(dev, "Failed to enable wakeup irq %d\n", ret);
+			goto err_assert_perst;
+		}
+		irq_set_irq_type(wake_irq, IRQ_TYPE_EDGE_FALLING);
+	}
+
+	return 0;
+
+err_assert_perst:
+	stm32_pcie_assert_perst(stm32_pcie);
+
+err_phy_exit:
+	phy_exit(stm32_pcie->phy);
+
+	return ret;
+}
+
+static void stm32_remove_pcie_port(struct stm32_pcie *stm32_pcie)
+{
+	dev_pm_clear_wake_irq(stm32_pcie->pci.dev);
+
+	stm32_pcie_assert_perst(stm32_pcie);
+
+	phy_exit(stm32_pcie->phy);
+}
+
+static int stm32_pcie_parse_port(struct stm32_pcie *stm32_pcie)
+{
+	struct device *dev = stm32_pcie->pci.dev;
+	struct device_node *root_port;
+
+	root_port = of_get_next_available_child(dev->of_node, NULL);
+
+	stm32_pcie->phy = devm_of_phy_get(dev, root_port, NULL);
+	if (IS_ERR(stm32_pcie->phy)) {
+		of_node_put(root_port);
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->phy),
+				     "Failed to get pcie-phy\n");
+	}
+
+	stm32_pcie->perst_gpio = devm_fwnode_gpiod_get(dev, of_fwnode_handle(root_port),
+						       "reset", GPIOD_OUT_HIGH, NULL);
+	if (IS_ERR(stm32_pcie->perst_gpio)) {
+		if (PTR_ERR(stm32_pcie->perst_gpio) != -ENOENT) {
+			of_node_put(root_port);
+			return dev_err_probe(dev, PTR_ERR(stm32_pcie->perst_gpio),
+					     "Failed to get reset GPIO\n");
+		}
+		stm32_pcie->perst_gpio = NULL;
+	}
+
+	stm32_pcie->wake_gpio = devm_fwnode_gpiod_get(dev, of_fwnode_handle(root_port),
+						      "wake", GPIOD_IN, NULL);
+
+	if (IS_ERR(stm32_pcie->wake_gpio)) {
+		if (PTR_ERR(stm32_pcie->wake_gpio) != -ENOENT) {
+			of_node_put(root_port);
+			return dev_err_probe(dev, PTR_ERR(stm32_pcie->wake_gpio),
+					     "Failed to get wake GPIO\n");
+		}
+		stm32_pcie->wake_gpio = NULL;
+	}
+
+	of_node_put(root_port);
+
+	return 0;
+}
+
+static int stm32_pcie_probe(struct platform_device *pdev)
+{
+	struct stm32_pcie *stm32_pcie;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	stm32_pcie = devm_kzalloc(dev, sizeof(*stm32_pcie), GFP_KERNEL);
+	if (!stm32_pcie)
+		return -ENOMEM;
+
+	stm32_pcie->pci.dev = dev;
+	stm32_pcie->pci.ops = &dw_pcie_ops;
+	stm32_pcie->pci.pp.ops = &stm32_pcie_host_ops;
+
+	stm32_pcie->regmap = syscon_regmap_lookup_by_compatible("st,stm32mp25-syscfg");
+	if (IS_ERR(stm32_pcie->regmap))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->regmap),
+				     "No syscfg specified\n");
+
+	stm32_pcie->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(stm32_pcie->clk))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->clk),
+				     "Failed to get PCIe clock source\n");
+
+	stm32_pcie->rst = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(stm32_pcie->rst))
+		return dev_err_probe(dev, PTR_ERR(stm32_pcie->rst),
+				     "Failed to get PCIe reset\n");
+
+	ret = stm32_pcie_parse_port(stm32_pcie);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, stm32_pcie);
+
+	ret = stm32_add_pcie_port(stm32_pcie);
+	if (ret)
+		return ret;
+
+	reset_control_assert(stm32_pcie->rst);
+	reset_control_deassert(stm32_pcie->rst);
+
+	ret = clk_prepare_enable(stm32_pcie->clk);
+	if (ret) {
+		dev_err(dev, "Core clock enable failed %d\n", ret);
+		goto err_remove_port;
+	}
+
+	ret = pm_runtime_set_active(dev);
+	if (ret < 0) {
+		dev_err_probe(dev, ret, "Failed to activate runtime PM\n");
+		goto err_disable_clk;
+	}
+
+	pm_runtime_no_callbacks(dev);
+
+	ret = devm_pm_runtime_enable(dev);
+	if (ret < 0) {
+		dev_err_probe(dev, ret, "Failed to enable runtime PM\n");
+		goto err_disable_clk;
+	}
+
+	ret = dw_pcie_host_init(&stm32_pcie->pci.pp);
+	if (ret)
+		goto err_disable_clk;
+
+	if (stm32_pcie->wake_gpio)
+		device_init_wakeup(dev, true);
+
+	return 0;
+
+err_disable_clk:
+	clk_disable_unprepare(stm32_pcie->clk);
+
+err_remove_port:
+	stm32_remove_pcie_port(stm32_pcie);
+
+	return ret;
+}
+
+static void stm32_pcie_remove(struct platform_device *pdev)
+{
+	struct stm32_pcie *stm32_pcie = platform_get_drvdata(pdev);
+	struct dw_pcie_rp *pp = &stm32_pcie->pci.pp;
+
+	if (stm32_pcie->wake_gpio)
+		device_init_wakeup(&pdev->dev, false);
+
+	dw_pcie_host_deinit(pp);
+
+	clk_disable_unprepare(stm32_pcie->clk);
+
+	stm32_remove_pcie_port(stm32_pcie);
+
+	pm_runtime_put_noidle(&pdev->dev);
+}
+
+static const struct of_device_id stm32_pcie_of_match[] = {
+	{ .compatible = "st,stm32mp25-pcie-rc" },
+	{},
+};
+
+static struct platform_driver stm32_pcie_driver = {
+	.probe = stm32_pcie_probe,
+	.remove = stm32_pcie_remove,
+	.driver = {
+		.name = "stm32-pcie",
+		.of_match_table = stm32_pcie_of_match,
+		.pm = &stm32_pcie_pm_ops,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+};
+
+module_platform_driver(stm32_pcie_driver);
+
+MODULE_AUTHOR("Christian Bruel <christian.bruel@foss.st.com>");
+MODULE_DESCRIPTION("STM32MP25 PCIe Controller driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, stm32_pcie_of_match);