Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

1 files changed, 78 insertions, 0 deletions

diff --git a/drivers/pci/controller/dwc/pcie-qcom-common.c b/drivers/pci/controller/dwc/pcie-qcom-common.c
new file mode 100644
index 000000000000..3aad19b56da8
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-qcom-common.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/pci.h>
+
+#include "pcie-designware.h"
+#include "pcie-qcom-common.h"
+
+void qcom_pcie_common_set_16gt_equalization(struct dw_pcie *pci)
+{
+	u32 reg;
+
+	/*
+	 * GEN3_RELATED_OFF register is repurposed to apply equalization
+	 * settings at various data transmission rates through registers namely
+	 * GEN3_EQ_*. The RATE_SHADOW_SEL bit field of GEN3_RELATED_OFF
+	 * determines the data rate for which these equalization settings are
+	 * applied.
+	 */
+	reg = dw_pcie_readl_dbi(pci, GEN3_RELATED_OFF);
+	reg &= ~GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL;
+	reg &= ~GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK;
+	reg |= FIELD_PREP(GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK,
+			  GEN3_RELATED_OFF_RATE_SHADOW_SEL_16_0GT);
+	dw_pcie_writel_dbi(pci, GEN3_RELATED_OFF, reg);
+
+	reg = dw_pcie_readl_dbi(pci, GEN3_EQ_FB_MODE_DIR_CHANGE_OFF);
+	reg &= ~(GEN3_EQ_FMDC_T_MIN_PHASE23 |
+		GEN3_EQ_FMDC_N_EVALS |
+		GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA |
+		GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA);
+	reg |= FIELD_PREP(GEN3_EQ_FMDC_T_MIN_PHASE23, 0x1) |
+		FIELD_PREP(GEN3_EQ_FMDC_N_EVALS, 0xd) |
+		FIELD_PREP(GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA, 0x5) |
+		FIELD_PREP(GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA, 0x5);
+	dw_pcie_writel_dbi(pci, GEN3_EQ_FB_MODE_DIR_CHANGE_OFF, reg);
+
+	reg = dw_pcie_readl_dbi(pci, GEN3_EQ_CONTROL_OFF);
+	reg &= ~(GEN3_EQ_CONTROL_OFF_FB_MODE |
+		GEN3_EQ_CONTROL_OFF_PHASE23_EXIT_MODE |
+		GEN3_EQ_CONTROL_OFF_FOM_INC_INITIAL_EVAL |
+		GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC);
+	dw_pcie_writel_dbi(pci, GEN3_EQ_CONTROL_OFF, reg);
+}
+EXPORT_SYMBOL_GPL(qcom_pcie_common_set_16gt_equalization);
+
+void qcom_pcie_common_set_16gt_lane_margining(struct dw_pcie *pci)
+{
+	u32 reg;
+
+	reg = dw_pcie_readl_dbi(pci, GEN4_LANE_MARGINING_1_OFF);
+	reg &= ~(MARGINING_MAX_VOLTAGE_OFFSET |
+		MARGINING_NUM_VOLTAGE_STEPS |
+		MARGINING_MAX_TIMING_OFFSET |
+		MARGINING_NUM_TIMING_STEPS);
+	reg |= FIELD_PREP(MARGINING_MAX_VOLTAGE_OFFSET, 0x24) |
+		FIELD_PREP(MARGINING_NUM_VOLTAGE_STEPS, 0x78) |
+		FIELD_PREP(MARGINING_MAX_TIMING_OFFSET, 0x32) |
+		FIELD_PREP(MARGINING_NUM_TIMING_STEPS, 0x10);
+	dw_pcie_writel_dbi(pci, GEN4_LANE_MARGINING_1_OFF, reg);
+
+	reg = dw_pcie_readl_dbi(pci, GEN4_LANE_MARGINING_2_OFF);
+	reg |= MARGINING_IND_ERROR_SAMPLER |
+		MARGINING_SAMPLE_REPORTING_METHOD |
+		MARGINING_IND_LEFT_RIGHT_TIMING |
+		MARGINING_VOLTAGE_SUPPORTED;
+	reg &= ~(MARGINING_IND_UP_DOWN_VOLTAGE |
+		MARGINING_MAXLANES |
+		MARGINING_SAMPLE_RATE_TIMING |
+		MARGINING_SAMPLE_RATE_VOLTAGE);
+	reg |= FIELD_PREP(MARGINING_MAXLANES, pci->num_lanes) |
+		FIELD_PREP(MARGINING_SAMPLE_RATE_TIMING, 0x3f) |
+		FIELD_PREP(MARGINING_SAMPLE_RATE_VOLTAGE, 0x3f);
+	dw_pcie_writel_dbi(pci, GEN4_LANE_MARGINING_2_OFF, reg);
+}
+EXPORT_SYMBOL_GPL(qcom_pcie_common_set_16gt_lane_margining);