diff options
| author | Helmut Grohne <helmut.grohne@intenta.de> | 2020-09-08 10:01:38 +0200 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2020-09-10 12:32:37 -0700 |
| commit | edecfa98f602a597666e3c5cab2677ada38d93c5 (patch) | |
| tree | 6348d2ca0afe83c6abe538e7566b1260fec60873 /drivers/net/dsa/microchip/ksz9477.c | |
| parent | f612eb76f349919128d5f5cc4e8cc4251a16bf30 (diff) | |
net: dsa: microchip: look for phy-mode in port nodes
Documentation/devicetree/bindings/net/dsa/dsa.txt says that the phy-mode
property should be specified on port nodes. However, the microchip
drivers read it from the switch node.
Let the driver use the per-port property and fall back to the old
location with a warning.
Fix in-tree users.
Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de>
Link: https://lore.kernel.org/netdev/20200617082235.GA1523@laureti-dev/
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/dsa/microchip/ksz9477.c')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz9477.c | 29 |
1 files changed, 19 insertions, 10 deletions
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c index 3cb22d1498131..2f5506ac7d191 100644 --- a/drivers/net/dsa/microchip/ksz9477.c +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -1208,7 +1208,7 @@ static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) /* configure MAC to 1G & RGMII mode */ ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8); - switch (dev->interface) { + switch (p->interface) { case PHY_INTERFACE_MODE_MII: ksz9477_set_xmii(dev, 0, &data8); ksz9477_set_gbit(dev, false, &data8); @@ -1229,11 +1229,11 @@ static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) ksz9477_set_gbit(dev, true, &data8); data8 &= ~PORT_RGMII_ID_IG_ENABLE; data8 &= ~PORT_RGMII_ID_EG_ENABLE; - if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID || - dev->interface == PHY_INTERFACE_MODE_RGMII_RXID) + if (p->interface == PHY_INTERFACE_MODE_RGMII_ID || + p->interface == PHY_INTERFACE_MODE_RGMII_RXID) data8 |= PORT_RGMII_ID_IG_ENABLE; - if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID || - dev->interface == PHY_INTERFACE_MODE_RGMII_TXID) + if (p->interface == PHY_INTERFACE_MODE_RGMII_ID || + p->interface == PHY_INTERFACE_MODE_RGMII_TXID) data8 |= PORT_RGMII_ID_EG_ENABLE; p->phydev.speed = SPEED_1000; break; @@ -1269,23 +1269,32 @@ static void ksz9477_config_cpu_port(struct dsa_switch *ds) dev->cpu_port = i; dev->host_mask = (1 << dev->cpu_port); dev->port_mask |= dev->host_mask; + p = &dev->ports[i]; /* Read from XMII register to determine host port * interface. If set specifically in device tree * note the difference to help debugging. */ interface = ksz9477_get_interface(dev, i); - if (!dev->interface) - dev->interface = interface; - if (interface && interface != dev->interface) + if (!p->interface) { + if (dev->compat_interface) { + dev_warn(dev->dev, + "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. " + "Please update your device tree.\n", + i); + p->interface = dev->compat_interface; + } else { + p->interface = interface; + } + } + if (interface && interface != p->interface) dev_info(dev->dev, "use %s instead of %s\n", - phy_modes(dev->interface), + phy_modes(p->interface), phy_modes(interface)); /* enable cpu port */ ksz9477_port_setup(dev, i, true); - p = &dev->ports[dev->cpu_port]; p->vid_member = dev->port_mask; p->on = 1; } |