Merge tag 'mmc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add support for Ultra Capacity SD cards (SDUC, 2TB to 128TB)
   - Add support for Ultra High-Speed II SD cards (UHS-II)
   - Use a reset control for pwrseq_simple
   - Add SD card quirk for broken poweroff notification
   - Use GFP_NOIO for SD ACMD22

  MMC host:
   - bcm2835: Introduce proper clock handling
   - mtk-sd: Add support for the Host-Software-Queue interface
   - mtk-sd: Add support for the mt7988/mt8196 variants
   - mtk-sd: Fix a couple of error paths in ->probe()
   - sdhci: Add interface to support UHS-II SD cards
   - sdhci_am654: Fixup support for changing the signal voltage level
   - sdhci-cadence: Add support for the Microchip PIC64GX variant
   - sdhci-esdhc-imx: Add support for eMMC HW-reset
   - sdhci-msm: Add support for the X1E80100/IPQ5424/SAR2130P/QCS615 variants
   - sdhci-of-arasan: Add support for eMMC HW-reset
   - sdhci-pci-gli: Add UHS-II support for the GL9767/GL9755 variants

  MEMSTICK:
   - A couple of minor updates"

* tag 'mmc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (78 commits)
  mmc: pwrseq_simple: Handle !RESET_CONTROLLER properly
  mmc: mtk-sd: Fix MMC_CAP2_CRYPTO flag setting
  mmc: mtk-sd: Fix error handle of probe function
  mmc: core: Correction a warning caused by incorrect type in assignment for UHS-II
  mmc: sdhci-esdhc-imx: Update esdhc sysctl dtocv bitmask
  mmc: sdhci-esdhc-imx: Implement emmc hardware reset
  mmc: core: Correct type in variable assignment for UHS-II
  mmc: sdhci-uhs2: correction a warning caused by incorrect type in argument
  mmc: sdhci-uhs2: Remove unnecessary variables
  mmc: sdhci-uhs2: Correct incorrect type in argument
  mmc: sdhci: Make MMC_SDHCI_UHS2 config symbol invisible
  mmc: sdhci-uhs2: Remove unnecessary NULL check
  mmc: core: Fix error paths for UHS-II card init and re-init
  mmc: core: Add error handling of sd_uhs2_power_up()
  mmc: core: Simplify sd_uhs2_power_up()
  mmc: bcm2835: Introduce proper clock handling
  mmc: bcm2835: Fix type of current clock speed
  dt-bindings: mmc: Add sdhci compatible for QCS615
  mmc: core: Use GFP_NOIO in ACMD22
  dt-bindings: mmc: sdhci-msm: Add SAR2130P compatible
  ...

1 files changed, 16 insertions, 8 deletions

diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 3b3adbddf6641..5c8e62e8f3318 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -144,10 +144,24 @@ int mmc_set_dsr(struct mmc_host *host)
 	return mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
 }
 
+int __mmc_go_idle(struct mmc_host *host)
+{
+	struct mmc_command cmd = {};
+	int err;
+
+	cmd.opcode = MMC_GO_IDLE_STATE;
+	cmd.arg = 0;
+	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC;
+
+	err = mmc_wait_for_cmd(host, &cmd, 0);
+	mmc_delay(1);
+
+	return err;
+}
+
 int mmc_go_idle(struct mmc_host *host)
 {
 	int err;
-	struct mmc_command cmd = {};
 
 	/*
 	 * Non-SPI hosts need to prevent chipselect going active during
@@ -163,13 +177,7 @@ int mmc_go_idle(struct mmc_host *host)
 		mmc_delay(1);
 	}
 
-	cmd.opcode = MMC_GO_IDLE_STATE;
-	cmd.arg = 0;
-	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC;
-
-	err = mmc_wait_for_cmd(host, &cmd, 0);
-
-	mmc_delay(1);
+	err = __mmc_go_idle(host);
 
 	if (!mmc_host_is_spi(host)) {
 		mmc_set_chip_select(host, MMC_CS_DONTCARE);