Merge tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block

Pull libata updates from Jens Axboe:
 "The big change in this round is that we're finally in a position where
  we can sanely remove the old drivers/ide/ code, as libata covers
  everything we need by now.

  This is exciting for two reasons:

   1) we delete a lot of legacy code that doesn't really meet the
      standards we have today, and

   2) it enables us to clean up various bits in the block layer that
      exist only because of the old IDE code.

  Outside of that, just a few minor fixes here, fixups for warnings,
  etc"

* tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block: (29 commits)
  ata: rb532_cf: remove redundant codes
  ide: remove the legacy ide driver
  m68k: use libata instead of the legacy ide driver
  ARM: disable CONFIG_IDE in pxa_defconfig
  ARM: disable CONFIG_IDE in footbridge_defconfig
  alpha: use libata instead of the legacy ide driver
  pata_cypress: add a module option to disable BM-DMA
  ata: pata_macio: Avoid overwriting initialised field in 'pata_macio_sht'
  ata: pata_serverworks: Avoid overwriting initialised field in 'serverworks_osb4_sht
  ata: pata_sc1200: sc1200_sht'Avoid overwriting initialised field in '
  ata: pata_cs5530: Avoid overwriting initialised field in 'cs5530_sht'
  ata: pata_cs5520: Avoid overwriting initialised field in 'cs5520_sht'
  ata: pata_atiixp: Avoid overwriting initialised field in 'atiixp_sht'
  ata: sata_nv: Do not over-write initialise fields in 'nv_adma_sht' and 'nv_swncq_sht'
  ata: sata_mv: Do not over-write initialise fields in 'mv6_sht'
  ata: sata_sil24: Do not over-write initialise fields in 'sil24_sht'
  ata: ahci: Ensure initialised fields are not overwritten in AHCI_SHT()
  ata: include: libata: Move fields commonly over-written to separate MACRO
  ahci: Add support for Dell S140 and later controllers
  ata: ahci_sunxi: Disable DIPM
  ...

1 files changed, 0 insertions, 168 deletions

diff --git a/drivers/ide/q40ide.c b/drivers/ide/q40ide.c
deleted file mode 100644
index ecd0a69245f6..000000000000
--- a/drivers/ide/q40ide.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- *  Q40 I/O port IDE Driver
- *
- *     (c) Richard Zidlicky
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive for
- *  more details.
- *
- *
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-#include <linux/module.h>
-
-#include <asm/ide.h>
-
-    /*
-     *  Bases of the IDE interfaces
-     */
-
-#define Q40IDE_NUM_HWIFS	2
-
-#define PCIDE_BASE1	0x1f0
-#define PCIDE_BASE2	0x170
-#define PCIDE_BASE3	0x1e8
-#define PCIDE_BASE4	0x168
-#define PCIDE_BASE5	0x1e0
-#define PCIDE_BASE6	0x160
-
-static const unsigned long pcide_bases[Q40IDE_NUM_HWIFS] = {
-    PCIDE_BASE1, PCIDE_BASE2, /* PCIDE_BASE3, PCIDE_BASE4  , PCIDE_BASE5,
-    PCIDE_BASE6 */
-};
-
-static int q40ide_default_irq(unsigned long base)
-{
-           switch (base) {
-	            case 0x1f0: return 14;
-		    case 0x170: return 15;
-		    case 0x1e8: return 11;
-		    default:
-			return 0;
-	   }
-}
-
-
-/*
- * Addresses are pretranslated for Q40 ISA access.
- */
-static void q40_ide_setup_ports(struct ide_hw *hw, unsigned long base, int irq)
-{
-	memset(hw, 0, sizeof(*hw));
-	/* BIG FAT WARNING: 
-	   assumption: only DATA port is ever used in 16 bit mode */
-	hw->io_ports.data_addr = Q40_ISA_IO_W(base);
-	hw->io_ports.error_addr = Q40_ISA_IO_B(base + 1);
-	hw->io_ports.nsect_addr = Q40_ISA_IO_B(base + 2);
-	hw->io_ports.lbal_addr = Q40_ISA_IO_B(base + 3);
-	hw->io_ports.lbam_addr = Q40_ISA_IO_B(base + 4);
-	hw->io_ports.lbah_addr = Q40_ISA_IO_B(base + 5);
-	hw->io_ports.device_addr = Q40_ISA_IO_B(base + 6);
-	hw->io_ports.status_addr = Q40_ISA_IO_B(base + 7);
-	hw->io_ports.ctl_addr = Q40_ISA_IO_B(base + 0x206);
-
-	hw->irq = irq;
-}
-
-static void q40ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
-			      void *buf, unsigned int len)
-{
-	unsigned long data_addr = drive->hwif->io_ports.data_addr;
-
-	if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) {
-		__ide_mm_insw(data_addr, buf, (len + 1) / 2);
-		return;
-	}
-
-	raw_insw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
-}
-
-static void q40ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
-			       void *buf, unsigned int len)
-{
-	unsigned long data_addr = drive->hwif->io_ports.data_addr;
-
-	if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) {
-		__ide_mm_outsw(data_addr, buf, (len + 1) / 2);
-		return;
-	}
-
-	raw_outsw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
-}
-
-/* Q40 has a byte-swapped IDE interface */
-static const struct ide_tp_ops q40ide_tp_ops = {
-	.exec_command		= ide_exec_command,
-	.read_status		= ide_read_status,
-	.read_altstatus		= ide_read_altstatus,
-	.write_devctl		= ide_write_devctl,
-
-	.dev_select		= ide_dev_select,
-	.tf_load		= ide_tf_load,
-	.tf_read		= ide_tf_read,
-
-	.input_data		= q40ide_input_data,
-	.output_data		= q40ide_output_data,
-};
-
-static const struct ide_port_info q40ide_port_info = {
-	.tp_ops			= &q40ide_tp_ops,
-	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
-	.irq_flags		= IRQF_SHARED,
-	.chipset		= ide_generic,
-};
-
-/* 
- * the static array is needed to have the name reported in /proc/ioports,
- * hwif->name unfortunately isn't available yet
- */
-static const char *q40_ide_names[Q40IDE_NUM_HWIFS]={
-	"ide0", "ide1"
-};
-
-/*
- *  Probe for Q40 IDE interfaces
- */
-
-static int __init q40ide_init(void)
-{
-    int i;
-    struct ide_hw hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL };
-
-    if (!MACH_IS_Q40)
-      return -ENODEV;
-
-    printk(KERN_INFO "ide: Q40 IDE controller\n");
-
-    for (i = 0; i < Q40IDE_NUM_HWIFS; i++) {
-	const char *name = q40_ide_names[i];
-
-	if (!request_region(pcide_bases[i], 8, name)) {
-		printk("could not reserve ports %lx-%lx for %s\n",
-		       pcide_bases[i],pcide_bases[i]+8,name);
-		continue;
-	}
-	if (!request_region(pcide_bases[i]+0x206, 1, name)) {
-		printk("could not reserve port %lx for %s\n",
-		       pcide_bases[i]+0x206,name);
-		release_region(pcide_bases[i], 8);
-		continue;
-	}
-	q40_ide_setup_ports(&hw[i], pcide_bases[i],
-			q40ide_default_irq(pcide_bases[i]));
-
-	hws[i] = &hw[i];
-    }
-
-    return ide_host_add(&q40ide_port_info, hws, Q40IDE_NUM_HWIFS, NULL);
-}
-
-module_init(q40ide_init);
-
-MODULE_LICENSE("GPL");