Merge tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block

Pull libata updates from Jens Axboe:
 "The big change in this round is that we're finally in a position where
  we can sanely remove the old drivers/ide/ code, as libata covers
  everything we need by now.

  This is exciting for two reasons:

   1) we delete a lot of legacy code that doesn't really meet the
      standards we have today, and

   2) it enables us to clean up various bits in the block layer that
      exist only because of the old IDE code.

  Outside of that, just a few minor fixes here, fixups for warnings,
  etc"

* tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block: (29 commits)
  ata: rb532_cf: remove redundant codes
  ide: remove the legacy ide driver
  m68k: use libata instead of the legacy ide driver
  ARM: disable CONFIG_IDE in pxa_defconfig
  ARM: disable CONFIG_IDE in footbridge_defconfig
  alpha: use libata instead of the legacy ide driver
  pata_cypress: add a module option to disable BM-DMA
  ata: pata_macio: Avoid overwriting initialised field in 'pata_macio_sht'
  ata: pata_serverworks: Avoid overwriting initialised field in 'serverworks_osb4_sht
  ata: pata_sc1200: sc1200_sht'Avoid overwriting initialised field in '
  ata: pata_cs5530: Avoid overwriting initialised field in 'cs5530_sht'
  ata: pata_cs5520: Avoid overwriting initialised field in 'cs5520_sht'
  ata: pata_atiixp: Avoid overwriting initialised field in 'atiixp_sht'
  ata: sata_nv: Do not over-write initialise fields in 'nv_adma_sht' and 'nv_swncq_sht'
  ata: sata_mv: Do not over-write initialise fields in 'mv6_sht'
  ata: sata_sil24: Do not over-write initialise fields in 'sil24_sht'
  ata: ahci: Ensure initialised fields are not overwritten in AHCI_SHT()
  ata: include: libata: Move fields commonly over-written to separate MACRO
  ahci: Add support for Dell S140 and later controllers
  ata: ahci_sunxi: Disable DIPM
  ...

1 files changed, 0 insertions, 476 deletions

diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c
deleted file mode 100644
index a671cead6ae7..000000000000
--- a/drivers/ide/piix.c
+++ /dev/null
@@ -1,476 +0,0 @@
-/*
- *  Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
- *  Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
- *  Copyright (C) 2003 Red Hat
- *  Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
- *
- *  May be copied or modified under the terms of the GNU General Public License
- *
- * Documentation:
- *
- *	Publicly available from Intel web site. Errata documentation
- * is also publicly available. As an aide to anyone hacking on this
- * driver the list of errata that are relevant is below.going back to
- * PIIX4. Older device documentation is now a bit tricky to find.
- *
- * Errata of note:
- *
- * Unfixable
- *	PIIX4    errata #9	- Only on ultra obscure hw
- *	ICH3	 errata #13     - Not observed to affect real hw
- *				  by Intel
- *
- * Things we must deal with
- *	PIIX4	errata #10	- BM IDE hang with non UDMA
- *				  (must stop/start dma to recover)
- *	440MX   errata #15	- As PIIX4 errata #10
- *	PIIX4	errata #15	- Must not read control registers
- * 				  during a PIO transfer
- *	440MX   errata #13	- As PIIX4 errata #15
- *	ICH2	errata #21	- DMA mode 0 doesn't work right
- *	ICH0/1  errata #55	- As ICH2 errata #21
- *	ICH2	spec c #9	- Extra operations needed to handle
- *				  drive hotswap [NOT YET SUPPORTED]
- *	ICH2    spec c #20	- IDE PRD must not cross a 64K boundary
- *				  and must be dword aligned
- *	ICH2    spec c #24	- UDMA mode 4,5 t85/86 should be 6ns not 3.3
- *
- * Should have been BIOS fixed:
- *	450NX:	errata #19	- DMA hangs on old 450NX
- *	450NX:  errata #20	- DMA hangs on old 450NX
- *	450NX:  errata #25	- Corruption with DMA on old 450NX
- *	ICH3    errata #15      - IDE deadlock under high load
- *				  (BIOS must set dev 31 fn 0 bit 23)
- *	ICH3	errata #18	- Don't use native mode
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "piix"
-
-static int no_piix_dma;
-
-/**
- *	piix_set_pio_mode	-	set host controller for PIO mode
- *	@port: port
- *	@drive: drive
- *
- *	Set the interface PIO mode based upon the settings done by AMI BIOS.
- */
-
-static void piix_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	int is_slave		= drive->dn & 1;
-	int master_port		= hwif->channel ? 0x42 : 0x40;
-	int slave_port		= 0x44;
-	unsigned long flags;
-	u16 master_data;
-	u8 slave_data;
-	static DEFINE_SPINLOCK(tune_lock);
-	int control = 0;
-	const u8 pio = drive->pio_mode - XFER_PIO_0;
-
-				     /* ISP  RTC */
-	static const u8 timings[][2]= {
-					{ 0, 0 },
-					{ 0, 0 },
-					{ 1, 0 },
-					{ 2, 1 },
-					{ 2, 3 }, };
-
-	/*
-	 * Master vs slave is synchronized above us but the slave register is
-	 * shared by the two hwifs so the corner case of two slave timeouts in
-	 * parallel must be locked.
-	 */
-	spin_lock_irqsave(&tune_lock, flags);
-	pci_read_config_word(dev, master_port, &master_data);
-
-	if (pio > 1)
-		control |= 1;	/* Programmable timing on */
-	if (drive->media == ide_disk)
-		control |= 4;	/* Prefetch, post write */
-	if (ide_pio_need_iordy(drive, pio))
-		control |= 2;	/* IORDY */
-	if (is_slave) {
-		master_data |=  0x4000;
-		master_data &= ~0x0070;
-		if (pio > 1) {
-			/* Set PPE, IE and TIME */
-			master_data |= control << 4;
-		}
-		pci_read_config_byte(dev, slave_port, &slave_data);
-		slave_data &= hwif->channel ? 0x0f : 0xf0;
-		slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) <<
-			       (hwif->channel ? 4 : 0);
-	} else {
-		master_data &= ~0x3307;
-		if (pio > 1) {
-			/* enable PPE, IE and TIME */
-			master_data |= control;
-		}
-		master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
-	}
-	pci_write_config_word(dev, master_port, master_data);
-	if (is_slave)
-		pci_write_config_byte(dev, slave_port, slave_data);
-	spin_unlock_irqrestore(&tune_lock, flags);
-}
-
-/**
- *	piix_set_dma_mode	-	set host controller for DMA mode
- *	@hwif: port
- *	@drive: drive
- *
- *	Set a PIIX host controller to the desired DMA mode.  This involves
- *	programming the right timing data into the PCI configuration space.
- */
-
-static void piix_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	u8 maslave		= hwif->channel ? 0x42 : 0x40;
-	int a_speed		= 3 << (drive->dn * 4);
-	int u_flag		= 1 << drive->dn;
-	int v_flag		= 0x01 << drive->dn;
-	int w_flag		= 0x10 << drive->dn;
-	int u_speed		= 0;
-	int			sitre;
-	u16			reg4042, reg4a;
-	u8			reg48, reg54, reg55;
-	const u8 speed		= drive->dma_mode;
-
-	pci_read_config_word(dev, maslave, &reg4042);
-	sitre = (reg4042 & 0x4000) ? 1 : 0;
-	pci_read_config_byte(dev, 0x48, &reg48);
-	pci_read_config_word(dev, 0x4a, &reg4a);
-	pci_read_config_byte(dev, 0x54, &reg54);
-	pci_read_config_byte(dev, 0x55, &reg55);
-
-	if (speed >= XFER_UDMA_0) {
-		u8 udma = speed - XFER_UDMA_0;
-
-		u_speed = min_t(u8, 2 - (udma & 1), udma) << (drive->dn * 4);
-
-		if (!(reg48 & u_flag))
-			pci_write_config_byte(dev, 0x48, reg48 | u_flag);
-		if (speed == XFER_UDMA_5) {
-			pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag);
-		} else {
-			pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
-		}
-		if ((reg4a & a_speed) != u_speed)
-			pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed);
-		if (speed > XFER_UDMA_2) {
-			if (!(reg54 & v_flag))
-				pci_write_config_byte(dev, 0x54, reg54 | v_flag);
-		} else
-			pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
-	} else {
-		const u8 mwdma_to_pio[] = { 0, 3, 4 };
-
-		if (reg48 & u_flag)
-			pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
-		if (reg4a & a_speed)
-			pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
-		if (reg54 & v_flag)
-			pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
-		if (reg55 & w_flag)
-			pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
-
-		if (speed >= XFER_MW_DMA_0)
-			drive->pio_mode =
-				mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0;
-		else
-			drive->pio_mode = XFER_PIO_2; /* for SWDMA2 */
-
-		piix_set_pio_mode(hwif, drive);
-	}
-}
-
-/**
- *	init_chipset_ich	-	set up the ICH chipset
- *	@dev: PCI device to set up
- *
- *	Initialize the PCI device as required.  For the ICH this turns
- *	out to be nice and simple.
- */
-
-static int init_chipset_ich(struct pci_dev *dev)
-{
-	u32 extra = 0;
-
-	pci_read_config_dword(dev, 0x54, &extra);
-	pci_write_config_dword(dev, 0x54, extra | 0x400);
-
-	return 0;
-}
-
-/**
- *	ich_clear_irq	-	clear BMDMA status
- *	@drive: IDE drive
- *
- *	ICHx contollers set DMA INTR no matter DMA or PIO.
- *	BMDMA status might need to be cleared even for
- *	PIO interrupts to prevent spurious/lost IRQ.
- */
-static void ich_clear_irq(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	u8 dma_stat;
-
-	/*
-	 * ide_dma_end() needs BMDMA status for error checking.
-	 * So, skip clearing BMDMA status here and leave it
-	 * to ide_dma_end() if this is DMA interrupt.
-	 */
-	if (drive->waiting_for_dma || hwif->dma_base == 0)
-		return;
-
-	/* clear the INTR & ERROR bits */
-	dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
-	/* Should we force the bit as well ? */
-	outb(dma_stat, hwif->dma_base + ATA_DMA_STATUS);
-}
-
-struct ich_laptop {
-	u16 device;
-	u16 subvendor;
-	u16 subdevice;
-};
-
-/*
- *	List of laptops that use short cables rather than 80 wire
- */
-
-static const struct ich_laptop ich_laptop[] = {
-	/* devid, subvendor, subdev */
-	{ 0x27DF, 0x1025, 0x0102 },	/* ICH7 on Acer 5602aWLMi */
-	{ 0x27DF, 0x0005, 0x0280 },	/* ICH7 on Acer 5602WLMi */
-	{ 0x27DF, 0x1025, 0x0110 },	/* ICH7 on Acer 3682WLMi */
-	{ 0x27DF, 0x1043, 0x1267 },	/* ICH7 on Asus W5F */
-	{ 0x27DF, 0x103C, 0x30A1 },	/* ICH7 on HP Compaq nc2400 */
-	{ 0x27DF, 0x1071, 0xD221 },	/* ICH7 on Hercules EC-900 */
-	{ 0x24CA, 0x1025, 0x0061 },	/* ICH4 on Acer Aspire 2023WLMi */
-	{ 0x24CA, 0x1025, 0x003d },	/* ICH4 on ACER TM290 */
-	{ 0x266F, 0x1025, 0x0066 },	/* ICH6 on ACER Aspire 1694WLMi */
-	{ 0x2653, 0x1043, 0x82D8 },	/* ICH6M on Asus Eee 701 */
-	{ 0x27df, 0x104d, 0x900e },	/* ICH7 on Sony TZ-90 */
-	/* end marker */
-	{ 0, }
-};
-
-static u8 piix_cable_detect(ide_hwif_t *hwif)
-{
-	struct pci_dev *pdev = to_pci_dev(hwif->dev);
-	const struct ich_laptop *lap = &ich_laptop[0];
-	u8 reg54h = 0, mask = hwif->channel ? 0xc0 : 0x30;
-
-	/* check for specials */
-	while (lap->device) {
-		if (lap->device == pdev->device &&
-		    lap->subvendor == pdev->subsystem_vendor &&
-		    lap->subdevice == pdev->subsystem_device) {
-			return ATA_CBL_PATA40_SHORT;
-		}
-		lap++;
-	}
-
-	pci_read_config_byte(pdev, 0x54, &reg54h);
-
-	return (reg54h & mask) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
-}
-
-/**
- *	init_hwif_piix		-	fill in the hwif for the PIIX
- *	@hwif: IDE interface
- *
- *	Set up the ide_hwif_t for the PIIX interface according to the
- *	capabilities of the hardware.
- */
-
-static void init_hwif_piix(ide_hwif_t *hwif)
-{
-	if (!hwif->dma_base)
-		return;
-
-	if (no_piix_dma)
-		hwif->ultra_mask = hwif->mwdma_mask = hwif->swdma_mask = 0;
-}
-
-static const struct ide_port_ops piix_port_ops = {
-	.set_pio_mode		= piix_set_pio_mode,
-	.set_dma_mode		= piix_set_dma_mode,
-	.cable_detect		= piix_cable_detect,
-};
-
-static const struct ide_port_ops ich_port_ops = {
-	.set_pio_mode		= piix_set_pio_mode,
-	.set_dma_mode		= piix_set_dma_mode,
-	.clear_irq		= ich_clear_irq,
-	.cable_detect		= piix_cable_detect,
-};
-
-#define DECLARE_PIIX_DEV(udma) \
-	{						\
-		.name		= DRV_NAME,		\
-		.init_hwif	= init_hwif_piix,	\
-		.enablebits	= {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
-		.port_ops	= &piix_port_ops,	\
-		.pio_mask	= ATA_PIO4,		\
-		.swdma_mask	= ATA_SWDMA2_ONLY,	\
-		.mwdma_mask	= ATA_MWDMA12_ONLY,	\
-		.udma_mask	= udma,			\
-	}
-
-#define DECLARE_ICH_DEV(mwdma, udma) \
-	{ \
-		.name		= DRV_NAME, \
-		.init_chipset	= init_chipset_ich, \
-		.init_hwif	= init_hwif_piix, \
-		.enablebits	= {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
-		.port_ops	= &ich_port_ops, \
-		.pio_mask	= ATA_PIO4, \
-		.swdma_mask	= ATA_SWDMA2_ONLY, \
-		.mwdma_mask	= mwdma, \
-		.udma_mask	= udma, \
-	}
-
-static const struct ide_port_info piix_pci_info[] = {
-	/* 0: MPIIX */
-	{	/*
-		 * MPIIX actually has only a single IDE channel mapped to
-		 * the primary or secondary ports depending on the value
-		 * of the bit 14 of the IDETIM register at offset 0x6c
-		 */
-		.name		= DRV_NAME,
-		.enablebits	= {{0x6d,0xc0,0x80}, {0x6d,0xc0,0xc0}},
-		.host_flags	= IDE_HFLAG_ISA_PORTS | IDE_HFLAG_NO_DMA,
-		.pio_mask	= ATA_PIO4,
-		/* This is a painful system best to let it self tune for now */
-	},
-	/* 1: PIIXa/PIIXb/PIIX3 */
-	DECLARE_PIIX_DEV(0x00), /* no udma */
-	/* 2: PIIX4 */
-	DECLARE_PIIX_DEV(ATA_UDMA2),
-	/* 3: ICH0 */
-	DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA2),
-	/* 4: ICH */
-	DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA4),
-	/* 5: PIIX4 */
-	DECLARE_PIIX_DEV(ATA_UDMA4),
-	/* 6: ICH[2-6]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */
-	DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA5),
-	/* 7: ICH7/7-R, no MWDMA1 */
-	DECLARE_ICH_DEV(ATA_MWDMA2_ONLY, ATA_UDMA5),
-};
-
-/**
- *	piix_init_one	-	called when a PIIX is found
- *	@dev: the piix device
- *	@id: the matching pci id
- *
- *	Called when the PCI registration layer (or the IDE initialization)
- *	finds a device matching our IDE device tables.
- */
- 
-static int piix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
-	return ide_pci_init_one(dev, &piix_pci_info[id->driver_data], NULL);
-}
-
-/**
- *	piix_check_450nx	-	Check for problem 450NX setup
- *	
- *	Check for the present of 450NX errata #19 and errata #25. If
- *	they are found, disable use of DMA IDE
- */
-
-static void piix_check_450nx(void)
-{
-	struct pci_dev *pdev = NULL;
-	u16 cfg;
-	while((pdev=pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev))!=NULL)
-	{
-		/* Look for 450NX PXB. Check for problem configurations
-		   A PCI quirk checks bit 6 already */
-		pci_read_config_word(pdev, 0x41, &cfg);
-		/* Only on the original revision: IDE DMA can hang */
-		if (pdev->revision == 0x00)
-			no_piix_dma = 1;
-		/* On all revisions below 5 PXB bus lock must be disabled for IDE */
-		else if (cfg & (1<<14) && pdev->revision < 5)
-			no_piix_dma = 2;
-	}
-	if(no_piix_dma)
-		printk(KERN_WARNING DRV_NAME ": 450NX errata present, disabling IDE DMA.\n");
-	if(no_piix_dma == 2)
-		printk(KERN_WARNING DRV_NAME ": A BIOS update may resolve this.\n");
-}		
-
-static const struct pci_device_id piix_pci_tbl[] = {
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371FB_0),  1 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371FB_1),  1 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371MX),    0 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371SB_1),  1 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371AB),    2 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801AB_1),  3 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82443MX_1),  2 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801AA_1),  4 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82372FB_1),  5 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82451NX),    2 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801BA_9),  6 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801BA_8),  6 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801CA_10), 6 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801CA_11), 6 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_11), 6 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801EB_11), 6 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801E_11),  6 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_10), 6 },
-#ifdef CONFIG_BLK_DEV_IDE_SATA
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801EB_1),  6 },
-#endif
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB_2),      6 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH6_19),    6 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21),    7 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_1),  6 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18),    7 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH8_6),     6 },
-	{ 0, },
-};
-MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
-
-static struct pci_driver piix_pci_driver = {
-	.name		= "PIIX_IDE",
-	.id_table	= piix_pci_tbl,
-	.probe		= piix_init_one,
-	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
-};
-
-static int __init piix_ide_init(void)
-{
-	piix_check_450nx();
-	return ide_pci_register_driver(&piix_pci_driver);
-}
-
-static void __exit piix_ide_exit(void)
-{
-	pci_unregister_driver(&piix_pci_driver);
-}
-
-module_init(piix_ide_init);
-module_exit(piix_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick, Andrzej Krzysztofowicz");
-MODULE_DESCRIPTION("PCI driver module for Intel PIIX IDE");
-MODULE_LICENSE("GPL");