Merge tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block

Pull libata updates from Jens Axboe:
 "The big change in this round is that we're finally in a position where
  we can sanely remove the old drivers/ide/ code, as libata covers
  everything we need by now.

  This is exciting for two reasons:

   1) we delete a lot of legacy code that doesn't really meet the
      standards we have today, and

   2) it enables us to clean up various bits in the block layer that
      exist only because of the old IDE code.

  Outside of that, just a few minor fixes here, fixups for warnings,
  etc"

* tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block: (29 commits)
  ata: rb532_cf: remove redundant codes
  ide: remove the legacy ide driver
  m68k: use libata instead of the legacy ide driver
  ARM: disable CONFIG_IDE in pxa_defconfig
  ARM: disable CONFIG_IDE in footbridge_defconfig
  alpha: use libata instead of the legacy ide driver
  pata_cypress: add a module option to disable BM-DMA
  ata: pata_macio: Avoid overwriting initialised field in 'pata_macio_sht'
  ata: pata_serverworks: Avoid overwriting initialised field in 'serverworks_osb4_sht
  ata: pata_sc1200: sc1200_sht'Avoid overwriting initialised field in '
  ata: pata_cs5530: Avoid overwriting initialised field in 'cs5530_sht'
  ata: pata_cs5520: Avoid overwriting initialised field in 'cs5520_sht'
  ata: pata_atiixp: Avoid overwriting initialised field in 'atiixp_sht'
  ata: sata_nv: Do not over-write initialise fields in 'nv_adma_sht' and 'nv_swncq_sht'
  ata: sata_mv: Do not over-write initialise fields in 'mv6_sht'
  ata: sata_sil24: Do not over-write initialise fields in 'sil24_sht'
  ata: ahci: Ensure initialised fields are not overwritten in AHCI_SHT()
  ata: include: libata: Move fields commonly over-written to separate MACRO
  ahci: Add support for Dell S140 and later controllers
  ata: ahci_sunxi: Disable DIPM
  ...

1 files changed, 0 insertions, 198 deletions

diff --git a/drivers/ide/ide-timings.c b/drivers/ide/ide-timings.c
deleted file mode 100644
index cfe78df74b7d..000000000000
--- a/drivers/ide/ide-timings.c
+++ /dev/null
@@ -1,198 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- *  Copyright (c) 1999-2001 Vojtech Pavlik
- *  Copyright (c) 2007-2008 Bartlomiej Zolnierkiewicz
- *
- * Should you need to contact me, the author, you can do so either by
- * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
- * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
- */
-
-#include <linux/kernel.h>
-#include <linux/ide.h>
-#include <linux/module.h>
-
-/*
- * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds).
- * These were taken from ATA/ATAPI-6 standard, rev 0a, except
- * for PIO 5, which is a nonstandard extension and UDMA6, which
- * is currently supported only by Maxtor drives.
- */
-
-static struct ide_timing ide_timing[] = {
-
-	{ XFER_UDMA_6,     0,   0,   0,   0,   0,   0,   0,  15 },
-	{ XFER_UDMA_5,     0,   0,   0,   0,   0,   0,   0,  20 },
-	{ XFER_UDMA_4,     0,   0,   0,   0,   0,   0,   0,  30 },
-	{ XFER_UDMA_3,     0,   0,   0,   0,   0,   0,   0,  45 },
-
-	{ XFER_UDMA_2,     0,   0,   0,   0,   0,   0,   0,  60 },
-	{ XFER_UDMA_1,     0,   0,   0,   0,   0,   0,   0,  80 },
-	{ XFER_UDMA_0,     0,   0,   0,   0,   0,   0,   0, 120 },
-
-	{ XFER_MW_DMA_4,  25,   0,   0,   0,  55,  20,  80,   0 },
-	{ XFER_MW_DMA_3,  25,   0,   0,   0,  65,  25, 100,   0 },
-	{ XFER_MW_DMA_2,  25,   0,   0,   0,  70,  25, 120,   0 },
-	{ XFER_MW_DMA_1,  45,   0,   0,   0,  80,  50, 150,   0 },
-	{ XFER_MW_DMA_0,  60,   0,   0,   0, 215, 215, 480,   0 },
-
-	{ XFER_SW_DMA_2,  60,   0,   0,   0, 120, 120, 240,   0 },
-	{ XFER_SW_DMA_1,  90,   0,   0,   0, 240, 240, 480,   0 },
-	{ XFER_SW_DMA_0, 120,   0,   0,   0, 480, 480, 960,   0 },
-
-	{ XFER_PIO_6,     10,  55,  20,  80,  55,  20,  80,   0 },
-	{ XFER_PIO_5,     15,  65,  25, 100,  65,  25, 100,   0 },
-	{ XFER_PIO_4,     25,  70,  25, 120,  70,  25, 120,   0 },
-	{ XFER_PIO_3,     30,  80,  70, 180,  80,  70, 180,   0 },
-
-	{ XFER_PIO_2,     30, 290,  40, 330, 100,  90, 240,   0 },
-	{ XFER_PIO_1,     50, 290,  93, 383, 125, 100, 383,   0 },
-	{ XFER_PIO_0,     70, 290, 240, 600, 165, 150, 600,   0 },
-
-	{ XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960,   0 },
-
-	{ 0xff }
-};
-
-struct ide_timing *ide_timing_find_mode(u8 speed)
-{
-	struct ide_timing *t;
-
-	for (t = ide_timing; t->mode != speed; t++)
-		if (t->mode == 0xff)
-			return NULL;
-	return t;
-}
-EXPORT_SYMBOL_GPL(ide_timing_find_mode);
-
-u16 ide_pio_cycle_time(ide_drive_t *drive, u8 pio)
-{
-	u16 *id = drive->id;
-	struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
-	u16 cycle = 0;
-
-	if (id[ATA_ID_FIELD_VALID] & 2) {
-		if (ata_id_has_iordy(drive->id))
-			cycle = id[ATA_ID_EIDE_PIO_IORDY];
-		else
-			cycle = id[ATA_ID_EIDE_PIO];
-
-		/* conservative "downgrade" for all pre-ATA2 drives */
-		if (pio < 3 && cycle < t->cycle)
-			cycle = 0; /* use standard timing */
-
-		/* Use the standard timing for the CF specific modes too */
-		if (pio > 4 && ata_id_is_cfa(id))
-			cycle = 0;
-	}
-
-	return cycle ? cycle : t->cycle;
-}
-EXPORT_SYMBOL_GPL(ide_pio_cycle_time);
-
-#define ENOUGH(v, unit)		(((v) - 1) / (unit) + 1)
-#define EZ(v, unit)		((v) ? ENOUGH((v) * 1000, unit) : 0)
-
-static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q,
-				int T, int UT)
-{
-	q->setup   = EZ(t->setup,   T);
-	q->act8b   = EZ(t->act8b,   T);
-	q->rec8b   = EZ(t->rec8b,   T);
-	q->cyc8b   = EZ(t->cyc8b,   T);
-	q->active  = EZ(t->active,  T);
-	q->recover = EZ(t->recover, T);
-	q->cycle   = EZ(t->cycle,   T);
-	q->udma    = EZ(t->udma,    UT);
-}
-
-void ide_timing_merge(struct ide_timing *a, struct ide_timing *b,
-		      struct ide_timing *m, unsigned int what)
-{
-	if (what & IDE_TIMING_SETUP)
-		m->setup   = max(a->setup,   b->setup);
-	if (what & IDE_TIMING_ACT8B)
-		m->act8b   = max(a->act8b,   b->act8b);
-	if (what & IDE_TIMING_REC8B)
-		m->rec8b   = max(a->rec8b,   b->rec8b);
-	if (what & IDE_TIMING_CYC8B)
-		m->cyc8b   = max(a->cyc8b,   b->cyc8b);
-	if (what & IDE_TIMING_ACTIVE)
-		m->active  = max(a->active,  b->active);
-	if (what & IDE_TIMING_RECOVER)
-		m->recover = max(a->recover, b->recover);
-	if (what & IDE_TIMING_CYCLE)
-		m->cycle   = max(a->cycle,   b->cycle);
-	if (what & IDE_TIMING_UDMA)
-		m->udma    = max(a->udma,    b->udma);
-}
-EXPORT_SYMBOL_GPL(ide_timing_merge);
-
-int ide_timing_compute(ide_drive_t *drive, u8 speed,
-		       struct ide_timing *t, int T, int UT)
-{
-	u16 *id = drive->id;
-	struct ide_timing *s, p;
-
-	/*
-	 * Find the mode.
-	 */
-	s = ide_timing_find_mode(speed);
-	if (s == NULL)
-		return -EINVAL;
-
-	/*
-	 * Copy the timing from the table.
-	 */
-	*t = *s;
-
-	/*
-	 * If the drive is an EIDE drive, it can tell us it needs extended
-	 * PIO/MWDMA cycle timing.
-	 */
-	if (id[ATA_ID_FIELD_VALID] & 2) {	/* EIDE drive */
-		memset(&p, 0, sizeof(p));
-
-		if (speed >= XFER_PIO_0 && speed < XFER_SW_DMA_0) {
-			if (speed <= XFER_PIO_2)
-				p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO];
-			else if ((speed <= XFER_PIO_4) ||
-				 (speed == XFER_PIO_5 && !ata_id_is_cfa(id)))
-				p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY];
-		} else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
-			p.cycle = id[ATA_ID_EIDE_DMA_MIN];
-
-		ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B);
-	}
-
-	/*
-	 * Convert the timing to bus clock counts.
-	 */
-	ide_timing_quantize(t, t, T, UT);
-
-	/*
-	 * Even in DMA/UDMA modes we still use PIO access for IDENTIFY,
-	 * S.M.A.R.T and some other commands. We have to ensure that the
-	 * DMA cycle timing is slower/equal than the current PIO timing.
-	 */
-	if (speed >= XFER_SW_DMA_0) {
-		ide_timing_compute(drive, drive->pio_mode, &p, T, UT);
-		ide_timing_merge(&p, t, t, IDE_TIMING_ALL);
-	}
-
-	/*
-	 * Lengthen active & recovery time so that cycle time is correct.
-	 */
-	if (t->act8b + t->rec8b < t->cyc8b) {
-		t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2;
-		t->rec8b = t->cyc8b - t->act8b;
-	}
-
-	if (t->active + t->recover < t->cycle) {
-		t->active += (t->cycle - (t->active + t->recover)) / 2;
-		t->recover = t->cycle - t->active;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ide_timing_compute);