Merge tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block

Pull libata updates from Jens Axboe:
 "The big change in this round is that we're finally in a position where
  we can sanely remove the old drivers/ide/ code, as libata covers
  everything we need by now.

  This is exciting for two reasons:

   1) we delete a lot of legacy code that doesn't really meet the
      standards we have today, and

   2) it enables us to clean up various bits in the block layer that
      exist only because of the old IDE code.

  Outside of that, just a few minor fixes here, fixups for warnings,
  etc"

* tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block: (29 commits)
  ata: rb532_cf: remove redundant codes
  ide: remove the legacy ide driver
  m68k: use libata instead of the legacy ide driver
  ARM: disable CONFIG_IDE in pxa_defconfig
  ARM: disable CONFIG_IDE in footbridge_defconfig
  alpha: use libata instead of the legacy ide driver
  pata_cypress: add a module option to disable BM-DMA
  ata: pata_macio: Avoid overwriting initialised field in 'pata_macio_sht'
  ata: pata_serverworks: Avoid overwriting initialised field in 'serverworks_osb4_sht
  ata: pata_sc1200: sc1200_sht'Avoid overwriting initialised field in '
  ata: pata_cs5530: Avoid overwriting initialised field in 'cs5530_sht'
  ata: pata_cs5520: Avoid overwriting initialised field in 'cs5520_sht'
  ata: pata_atiixp: Avoid overwriting initialised field in 'atiixp_sht'
  ata: sata_nv: Do not over-write initialise fields in 'nv_adma_sht' and 'nv_swncq_sht'
  ata: sata_mv: Do not over-write initialise fields in 'mv6_sht'
  ata: sata_sil24: Do not over-write initialise fields in 'sil24_sht'
  ata: ahci: Ensure initialised fields are not overwritten in AHCI_SHT()
  ata: include: libata: Move fields commonly over-written to separate MACRO
  ahci: Add support for Dell S140 and later controllers
  ata: ahci_sunxi: Disable DIPM
  ...

1 files changed, 0 insertions, 294 deletions

diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c
deleted file mode 100644
index 8b5ca145191b..000000000000
--- a/drivers/ide/cs5536.c
+++ /dev/null
@@ -1,294 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * CS5536 PATA support
- * (C) 2007 Martin K. Petersen <mkp@mkp.net>
- * (C) 2009 Bartlomiej Zolnierkiewicz
- *
- * Documentation:
- *	Available from AMD web site.
- *
- * The IDE timing registers for the CS5536 live in the Geode Machine
- * Specific Register file and not PCI config space.  Most BIOSes
- * virtualize the PCI registers so the chip looks like a standard IDE
- * controller.  Unfortunately not all implementations get this right.
- * In particular some have problems with unaligned accesses to the
- * virtualized PCI registers.  This driver always does full dword
- * writes to work around the issue.  Also, in case of a bad BIOS this
- * driver can be loaded with the "msr=1" parameter which forces using
- * the Machine Specific Registers to configure the device.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-#include <asm/msr.h>
-
-#define DRV_NAME	"cs5536"
-
-enum {
-	MSR_IDE_CFG		= 0x51300010,
-	PCI_IDE_CFG		= 0x40,
-
-	CFG			= 0,
-	DTC			= 2,
-	CAST			= 3,
-	ETC			= 4,
-
-	IDE_CFG_CHANEN		= (1 << 1),
-	IDE_CFG_CABLE		= (1 << 17) | (1 << 16),
-
-	IDE_D0_SHIFT		= 24,
-	IDE_D1_SHIFT		= 16,
-	IDE_DRV_MASK		= 0xff,
-
-	IDE_CAST_D0_SHIFT	= 6,
-	IDE_CAST_D1_SHIFT	= 4,
-	IDE_CAST_DRV_MASK	= 0x3,
-
-	IDE_CAST_CMD_SHIFT	= 24,
-	IDE_CAST_CMD_MASK	= 0xff,
-
-	IDE_ETC_UDMA_MASK	= 0xc0,
-};
-
-static int use_msr;
-
-static int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
-{
-	if (unlikely(use_msr)) {
-		u32 dummy;
-
-		rdmsr(MSR_IDE_CFG + reg, *val, dummy);
-		return 0;
-	}
-
-	return pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
-}
-
-static int cs5536_write(struct pci_dev *pdev, int reg, int val)
-{
-	if (unlikely(use_msr)) {
-		wrmsr(MSR_IDE_CFG + reg, val, 0);
-		return 0;
-	}
-
-	return pci_write_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
-}
-
-static void cs5536_program_dtc(ide_drive_t *drive, u8 tim)
-{
-	struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
-	int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
-	u32 dtc;
-
-	cs5536_read(pdev, DTC, &dtc);
-	dtc &= ~(IDE_DRV_MASK << dshift);
-	dtc |= tim << dshift;
-	cs5536_write(pdev, DTC, dtc);
-}
-
-/**
- *	cs5536_cable_detect	-	detect cable type
- *	@hwif: Port to detect on
- *
- *	Perform cable detection for ATA66 capable cable.
- *
- *	Returns a cable type.
- */
-
-static u8 cs5536_cable_detect(ide_hwif_t *hwif)
-{
-	struct pci_dev *pdev = to_pci_dev(hwif->dev);
-	u32 cfg;
-
-	cs5536_read(pdev, CFG, &cfg);
-
-	if (cfg & IDE_CFG_CABLE)
-		return ATA_CBL_PATA80;
-	else
-		return ATA_CBL_PATA40;
-}
-
-/**
- *	cs5536_set_pio_mode		-	PIO timing setup
- *	@hwif: ATA port
- *	@drive: ATA device
- */
-
-static void cs5536_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	static const u8 drv_timings[5] = {
-		0x98, 0x55, 0x32, 0x21, 0x20,
-	};
-
-	static const u8 addr_timings[5] = {
-		0x2, 0x1, 0x0, 0x0, 0x0,
-	};
-
-	static const u8 cmd_timings[5] = {
-		0x99, 0x92, 0x90, 0x22, 0x20,
-	};
-
-	struct pci_dev *pdev = to_pci_dev(hwif->dev);
-	ide_drive_t *pair = ide_get_pair_dev(drive);
-	int cshift = (drive->dn & 1) ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
-	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
-	u32 cast;
-	const u8 pio = drive->pio_mode - XFER_PIO_0;
-	u8 cmd_pio = pio;
-
-	if (pair)
-		cmd_pio = min_t(u8, pio, pair->pio_mode - XFER_PIO_0);
-
-	timings &= (IDE_DRV_MASK << 8);
-	timings |= drv_timings[pio];
-	ide_set_drivedata(drive, (void *)timings);
-
-	cs5536_program_dtc(drive, drv_timings[pio]);
-
-	cs5536_read(pdev, CAST, &cast);
-
-	cast &= ~(IDE_CAST_DRV_MASK << cshift);
-	cast |= addr_timings[pio] << cshift;
-
-	cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT);
-	cast |= cmd_timings[cmd_pio] << IDE_CAST_CMD_SHIFT;
-
-	cs5536_write(pdev, CAST, cast);
-}
-
-/**
- *	cs5536_set_dma_mode		-	DMA timing setup
- *	@hwif: ATA port
- *	@drive: ATA device
- */
-
-static void cs5536_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	static const u8 udma_timings[6] = {
-		0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6,
-	};
-
-	static const u8 mwdma_timings[3] = {
-		0x67, 0x21, 0x20,
-	};
-
-	struct pci_dev *pdev = to_pci_dev(hwif->dev);
-	int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
-	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
-	u32 etc;
-	const u8 mode = drive->dma_mode;
-
-	cs5536_read(pdev, ETC, &etc);
-
-	if (mode >= XFER_UDMA_0) {
-		etc &= ~(IDE_DRV_MASK << dshift);
-		etc |= udma_timings[mode - XFER_UDMA_0] << dshift;
-	} else { /* MWDMA */
-		etc &= ~(IDE_ETC_UDMA_MASK << dshift);
-		timings &= IDE_DRV_MASK;
-		timings |= mwdma_timings[mode - XFER_MW_DMA_0] << 8;
-		ide_set_drivedata(drive, (void *)timings);
-	}
-
-	cs5536_write(pdev, ETC, etc);
-}
-
-static void cs5536_dma_start(ide_drive_t *drive)
-{
-	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
-
-	if (drive->current_speed < XFER_UDMA_0 &&
-	    (timings >> 8) != (timings & IDE_DRV_MASK))
-		cs5536_program_dtc(drive, timings >> 8);
-
-	ide_dma_start(drive);
-}
-
-static int cs5536_dma_end(ide_drive_t *drive)
-{
-	int ret = ide_dma_end(drive);
-	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
-
-	if (drive->current_speed < XFER_UDMA_0 &&
-	    (timings >> 8) != (timings & IDE_DRV_MASK))
-		cs5536_program_dtc(drive, timings & IDE_DRV_MASK);
-
-	return ret;
-}
-
-static const struct ide_port_ops cs5536_port_ops = {
-	.set_pio_mode		= cs5536_set_pio_mode,
-	.set_dma_mode		= cs5536_set_dma_mode,
-	.cable_detect		= cs5536_cable_detect,
-};
-
-static const struct ide_dma_ops cs5536_dma_ops = {
-	.dma_host_set		= ide_dma_host_set,
-	.dma_setup		= ide_dma_setup,
-	.dma_start		= cs5536_dma_start,
-	.dma_end		= cs5536_dma_end,
-	.dma_test_irq		= ide_dma_test_irq,
-	.dma_lost_irq		= ide_dma_lost_irq,
-	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
-	.dma_sff_read_status	= ide_dma_sff_read_status,
-};
-
-static const struct ide_port_info cs5536_info = {
-	.name		= DRV_NAME,
-	.port_ops	= &cs5536_port_ops,
-	.dma_ops	= &cs5536_dma_ops,
-	.host_flags	= IDE_HFLAG_SINGLE,
-	.pio_mask	= ATA_PIO4,
-	.mwdma_mask	= ATA_MWDMA2,
-	.udma_mask	= ATA_UDMA5,
-};
-
-/**
- *	cs5536_init_one
- *	@dev: PCI device
- *	@id: Entry in match table
- */
-
-static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
-	u32 cfg;
-
-	if (use_msr)
-		printk(KERN_INFO DRV_NAME ": Using MSR regs instead of PCI\n");
-
-	cs5536_read(dev, CFG, &cfg);
-
-	if ((cfg & IDE_CFG_CHANEN) == 0) {
-		printk(KERN_ERR DRV_NAME ": disabled by BIOS\n");
-		return -ENODEV;
-	}
-
-	return ide_pci_init_one(dev, &cs5536_info, NULL);
-}
-
-static const struct pci_device_id cs5536_pci_tbl[] = {
-	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), },
-	{ },
-};
-
-static struct pci_driver cs5536_pci_driver = {
-	.name		= DRV_NAME,
-	.id_table	= cs5536_pci_tbl,
-	.probe		= cs5536_init_one,
-	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
-};
-
-module_pci_driver(cs5536_pci_driver);
-
-MODULE_AUTHOR("Martin K. Petersen, Bartlomiej Zolnierkiewicz");
-MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller");
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(pci, cs5536_pci_tbl);
-
-module_param_named(msr, use_msr, int, 0644);
-MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");