Merge branch 'for-6.15/amd_sfh' into for-linus

From: Mario Limonciello <mario.limonciello@amd.com>

Some platforms include a human presence detection (HPD) sensor. When
enabled and a user is detected a wake event will be emitted from the
sensor fusion hub that software can react to.

Example use cases are "wake from suspend on approach" or to "lock
when leaving".

This is currently enabled by default on supported systems, but users
can't control it. This essentially means that wake on approach is
enabled which is a really surprising behavior to users that don't
expect it.

Instead of defaulting to enabled add a sysfs knob that users can
use to enable the feature if desirable and set it to disabled by
default.

1 files changed, 15 insertions, 14 deletions

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index 492b09d845719..dce9323fb410c 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -119,9 +119,10 @@
  * - 3.57.0 - Compute tunneling on GFX10+
  * - 3.58.0 - Add GFX12 DCC support
  * - 3.59.0 - Cleared VRAM
+ * - 3.60.0 - Add AMDGPU_TILING_GFX12_DCC_WRITE_COMPRESS_DISABLE (Vulkan requirement)
  */
 #define KMS_DRIVER_MAJOR	3
-#define KMS_DRIVER_MINOR	59
+#define KMS_DRIVER_MINOR	60
 #define KMS_DRIVER_PATCHLEVEL	0
 
 /*
@@ -280,7 +281,7 @@ module_param_named(gartsize, amdgpu_gart_size, uint, 0600);
 /**
  * DOC: gttsize (int)
  * Restrict the size of GTT domain (for userspace use) in MiB for testing.
- * The default is -1 (Use 1/2 RAM, minimum value is 3GB).
+ * The default is -1 (Use value specified by TTM).
  */
 MODULE_PARM_DESC(gttsize, "Size of the GTT userspace domain in megabytes (-1 = auto)");
 module_param_named(gttsize, amdgpu_gtt_size, int, 0600);
@@ -399,7 +400,7 @@ module_param_named(runpm, amdgpu_runtime_pm, int, 0444);
  * the kernel log for the list of IPs on the asic. The default is 0xffffffff (enable all blocks on a device).
  */
 MODULE_PARM_DESC(ip_block_mask, "IP Block Mask (all blocks enabled (default))");
-module_param_named(ip_block_mask, amdgpu_ip_block_mask, uint, 0444);
+module_param_named_unsafe(ip_block_mask, amdgpu_ip_block_mask, uint, 0444);
 
 /**
  * DOC: bapm (int)
@@ -457,7 +458,7 @@ module_param_named(vm_update_mode, amdgpu_vm_update_mode, int, 0444);
  * Enable experimental hw support (1 = enable). The default is 0 (disabled).
  */
 MODULE_PARM_DESC(exp_hw_support, "experimental hw support (1 = enable, 0 = disable (default))");
-module_param_named(exp_hw_support, amdgpu_exp_hw_support, int, 0444);
+module_param_named_unsafe(exp_hw_support, amdgpu_exp_hw_support, int, 0444);
 
 /**
  * DOC: dc (int)
@@ -568,14 +569,14 @@ module_param_named(compute_multipipe, amdgpu_compute_multipipe, int, 0444);
  * Set to enable GPU recovery mechanism (1 = enable, 0 = disable). The default is -1 (auto, disabled except SRIOV).
  */
 MODULE_PARM_DESC(gpu_recovery, "Enable GPU recovery mechanism, (1 = enable, 0 = disable, -1 = auto)");
-module_param_named(gpu_recovery, amdgpu_gpu_recovery, int, 0444);
+module_param_named_unsafe(gpu_recovery, amdgpu_gpu_recovery, int, 0444);
 
 /**
  * DOC: emu_mode (int)
  * Set value 1 to enable emulation mode. This is only needed when running on an emulator. The default is 0 (disabled).
  */
 MODULE_PARM_DESC(emu_mode, "Emulation mode, (1 = enable, 0 = disable)");
-module_param_named(emu_mode, amdgpu_emu_mode, int, 0444);
+module_param_named_unsafe(emu_mode, amdgpu_emu_mode, int, 0444);
 
 /**
  * DOC: ras_enable (int)
@@ -730,7 +731,7 @@ module_param_named(noretry, amdgpu_noretry, int, 0644);
  */
 MODULE_PARM_DESC(force_asic_type,
 	"A non negative value used to specify the asic type for all supported GPUs");
-module_param_named(force_asic_type, amdgpu_force_asic_type, int, 0444);
+module_param_named_unsafe(force_asic_type, amdgpu_force_asic_type, int, 0444);
 
 /**
  * DOC: use_xgmi_p2p (int)
@@ -749,7 +750,7 @@ module_param_named(use_xgmi_p2p, amdgpu_use_xgmi_p2p, int, 0444);
  * assigns queues to HQDs.
  */
 int sched_policy = KFD_SCHED_POLICY_HWS;
-module_param(sched_policy, int, 0444);
+module_param_unsafe(sched_policy, int, 0444);
 MODULE_PARM_DESC(sched_policy,
 	"Scheduling policy (0 = HWS (Default), 1 = HWS without over-subscription, 2 = Non-HWS (Used for debugging only)");
 
@@ -799,7 +800,7 @@ MODULE_PARM_DESC(send_sigterm,
  * Setting 1 enables halt on hang.
  */
 int halt_if_hws_hang;
-module_param(halt_if_hws_hang, int, 0644);
+module_param_unsafe(halt_if_hws_hang, int, 0644);
 MODULE_PARM_DESC(halt_if_hws_hang, "Halt if HWS hang is detected (0 = off (default), 1 = on)");
 
 /**
@@ -808,7 +809,7 @@ MODULE_PARM_DESC(halt_if_hws_hang, "Halt if HWS hang is detected (0 = off (defau
  * check says. Default value: false (rely on MEC2 firmware version check).
  */
 bool hws_gws_support;
-module_param(hws_gws_support, bool, 0444);
+module_param_unsafe(hws_gws_support, bool, 0444);
 MODULE_PARM_DESC(hws_gws_support, "Assume MEC2 FW supports GWS barriers (false = rely on FW version check (Default), true = force supported)");
 
 /**
@@ -841,7 +842,7 @@ MODULE_PARM_DESC(no_system_mem_limit, "disable system memory limit (false = defa
  */
 int amdgpu_no_queue_eviction_on_vm_fault;
 MODULE_PARM_DESC(no_queue_eviction_on_vm_fault, "No queue eviction on VM fault (0 = queue eviction, 1 = no queue eviction)");
-module_param_named(no_queue_eviction_on_vm_fault, amdgpu_no_queue_eviction_on_vm_fault, int, 0444);
+module_param_named_unsafe(no_queue_eviction_on_vm_fault, amdgpu_no_queue_eviction_on_vm_fault, int, 0444);
 #endif
 
 /**
@@ -849,7 +850,7 @@ module_param_named(no_queue_eviction_on_vm_fault, amdgpu_no_queue_eviction_on_vm
  */
 int amdgpu_mtype_local;
 MODULE_PARM_DESC(mtype_local, "MTYPE for local memory (0 = MTYPE_RW (default), 1 = MTYPE_NC, 2 = MTYPE_CC)");
-module_param_named(mtype_local, amdgpu_mtype_local, int, 0444);
+module_param_named_unsafe(mtype_local, amdgpu_mtype_local, int, 0444);
 
 /**
  * DOC: pcie_p2p (bool)
@@ -953,7 +954,7 @@ module_param_named(freesync_video, amdgpu_freesync_vid_mode, uint, 0444);
  * GPU reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = mode1, 3 = mode2, 4 = baco)
  */
 MODULE_PARM_DESC(reset_method, "GPU reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = mode1, 3 = mode2, 4 = baco/bamaco)");
-module_param_named(reset_method, amdgpu_reset_method, int, 0644);
+module_param_named_unsafe(reset_method, amdgpu_reset_method, int, 0644);
 
 /**
  * DOC: bad_page_threshold (int) Bad page threshold is specifies the
@@ -1049,7 +1050,7 @@ module_param_named(seamless, amdgpu_seamless, int, 0444);
  * - 0x4: Disable GPU soft recovery, always do a full reset
  */
 MODULE_PARM_DESC(debug_mask, "debug options for amdgpu, disabled by default");
-module_param_named(debug_mask, amdgpu_debug_mask, uint, 0444);
+module_param_named_unsafe(debug_mask, amdgpu_debug_mask, uint, 0444);
 
 /**
  * DOC: agp (int)