diff options
| author | Wen Gong <quic_wgong@quicinc.com> | 2021-12-08 10:43:59 +0200 |
|---|---|---|
| committer | Kalle Valo <quic_kvalo@quicinc.com> | 2021-12-09 09:59:35 +0200 |
| commit | 9f6da09a5f6ab94bca58395af56b883b3a79663a (patch) | |
| tree | 4564550828323d6603db59632e0626b340023645 /drivers/fpga/fpga-mgr.c | |
| parent | a658c929ded7ea3aee324c8c2a9635a5e5a38e7f (diff) | |
ath11k: enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS for WCN6855
Currently mac80211 will send 3 scan request for each scan of WCN6855,
they are 2.4 GHz/5 GHz/6 GHz band scan. Firmware of WCN6855 will
cache the RNR IE(Reduced Neighbor Report element) which exist in the
beacon of 2.4 GHz/5 GHz of the AP which is co-located with 6 GHz,
and then use the cache to scan in 6 GHz band scan if the 6 GHz scan
is in the same scan with the 2.4 GHz/5 GHz band, this will helpful to
search more AP of 6 GHz. Also it will decrease the time cost of scan
because firmware will use dual-band scan for the 2.4 GHz/5 GHz, it
means the 2.4 GHz and 5 GHz scans are doing simultaneously.
Set the flag IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS for WCN6855 since
it supports 2.4 GHz/5 GHz/6 GHz and it is single pdev which means
all the 2.4 GHz/5 GHz/6 GHz exist in the same wiphy/ieee80211_hw.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211129101309.2931-1-quic_wgong@quicinc.com
Diffstat (limited to 'drivers/fpga/fpga-mgr.c')
0 files changed, 0 insertions, 0 deletions