Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pul removal of obsolete architecture ports from Arnd Bergmann:
 "This removes the entire architecture code for blackfin, cris, frv,
  m32r, metag, mn10300, score, and tile, including the associated device
  drivers.

  I have been working with the (former) maintainers for each one to
  ensure that my interpretation was right and the code is definitely
  unused in mainline kernels. Many had fond memories of working on the
  respective ports to start with and getting them included in upstream,
  but also saw no point in keeping the port alive without any users.

  In the end, it seems that while the eight architectures are extremely
  different, they all suffered the same fate: There was one company in
  charge of an SoC line, a CPU microarchitecture and a software
  ecosystem, which was more costly than licensing newer off-the-shelf
  CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
  seems that all the SoC product lines are still around, but have not
  used the custom CPU architectures for several years at this point. In
  contrast, CPU instruction sets that remain popular and have actively
  maintained kernel ports tend to all be used across multiple licensees.

  [ See the new nds32 port merged in the previous commit for the next
    generation of "one company in charge of an SoC line, a CPU
    microarchitecture and a software ecosystem"   - Linus ]

  The removal came out of a discussion that is now documented at
  https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
  marking any ports as deprecated but remove them all at once after I
  made sure that they are all unused. Some architectures (notably tile,
  mn10300, and blackfin) are still being shipped in products with old
  kernels, but those products will never be updated to newer kernel
  releases.

  After this series, we still have a few architectures without mainline
  gcc support:

   - unicore32 and hexagon both have very outdated gcc releases, but the
     maintainers promised to work on providing something newer. At least
     in case of hexagon, this will only be llvm, not gcc.

   - openrisc, risc-v and nds32 are still in the process of finishing
     their support or getting it added to mainline gcc in the first
     place. They all have patched gcc-7.3 ports that work to some
     degree, but complete upstream support won't happen before gcc-8.1.
     Csky posted their first kernel patch set last week, their situation
     will be similar

  [ Palmer Dabbelt points out that RISC-V support is in mainline gcc
    since gcc-7, although gcc-7.3.0 is the recommended minimum  - Linus ]"

This really says it all:

 2498 files changed, 95 insertions(+), 467668 deletions(-)

* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
  MAINTAINERS: UNICORE32: Change email account
  staging: iio: remove iio-trig-bfin-timer driver
  tty: hvc: remove tile driver
  tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
  serial: remove tile uart driver
  serial: remove m32r_sio driver
  serial: remove blackfin drivers
  serial: remove cris/etrax uart drivers
  usb: Remove Blackfin references in USB support
  usb: isp1362: remove blackfin arch glue
  usb: musb: remove blackfin port
  usb: host: remove tilegx platform glue
  pwm: remove pwm-bfin driver
  i2c: remove bfin-twi driver
  spi: remove blackfin related host drivers
  watchdog: remove bfin_wdt driver
  can: remove bfin_can driver
  mmc: remove bfin_sdh driver
  input: misc: remove blackfin rotary driver
  input: keyboard: remove bf54x driver
  ...

1 files changed, 0 insertions, 390 deletions

diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c
deleted file mode 100644
index 29cc58038b98c..0000000000000
--- a/arch/cris/mm/fault.c
+++ /dev/null
@@ -1,390 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *  arch/cris/mm/fault.c
- *
- *  Copyright (C) 2000-2010  Axis Communications AB
- */
-
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/extable.h>
-#include <linux/wait.h>
-#include <linux/sched/signal.h>
-#include <linux/uaccess.h>
-#include <arch/system.h>
-
-extern int find_fixup_code(struct pt_regs *);
-extern void die_if_kernel(const char *, struct pt_regs *, long);
-extern void show_registers(struct pt_regs *regs);
-
-/* debug of low-level TLB reload */
-#undef DEBUG
-
-#ifdef DEBUG
-#define D(x) x
-#else
-#define D(x)
-#endif
-
-/* debug of higher-level faults */
-#define DPG(x)
-
-/* current active page directory */
-
-DEFINE_PER_CPU(pgd_t *, current_pgd);
-unsigned long cris_signal_return_page;
-
-/*
- * This routine handles page faults.  It determines the address,
- * and the problem, and then passes it off to one of the appropriate
- * routines.
- *
- * Notice that the address we're given is aligned to the page the fault
- * occurred in, since we only get the PFN in R_MMU_CAUSE not the complete
- * address.
- *
- * error_code:
- *      bit 0 == 0 means no page found, 1 means protection fault
- *      bit 1 == 0 means read, 1 means write
- *
- * If this routine detects a bad access, it returns 1, otherwise it
- * returns 0.
- */
-
-asmlinkage void
-do_page_fault(unsigned long address, struct pt_regs *regs,
-	      int protection, int writeaccess)
-{
-	struct task_struct *tsk;
-	struct mm_struct *mm;
-	struct vm_area_struct * vma;
-	siginfo_t info;
-	int fault;
-	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
-
-	D(printk(KERN_DEBUG
-		 "Page fault for %lX on %X at %lX, prot %d write %d\n",
-		 address, smp_processor_id(), instruction_pointer(regs),
-		 protection, writeaccess));
-
-	tsk = current;
-
-	/*
-	 * We fault-in kernel-space virtual memory on-demand. The
-	 * 'reference' page table is init_mm.pgd.
-	 *
-	 * NOTE! We MUST NOT take any locks for this case. We may
-	 * be in an interrupt or a critical region, and should
-	 * only copy the information from the master page table,
-	 * nothing more.
-	 *
-	 * NOTE2: This is done so that, when updating the vmalloc
-	 * mappings we don't have to walk all processes pgdirs and
-	 * add the high mappings all at once. Instead we do it as they
-	 * are used. However vmalloc'ed page entries have the PAGE_GLOBAL
-	 * bit set so sometimes the TLB can use a lingering entry.
-	 *
-	 * This verifies that the fault happens in kernel space
-	 * and that the fault was not a protection error (error_code & 1).
-	 */
-
-	if (address >= VMALLOC_START &&
-	    !protection &&
-	    !user_mode(regs))
-		goto vmalloc_fault;
-
-	/* When stack execution is not allowed we store the signal
-	 * trampolines in the reserved cris_signal_return_page.
-	 * Handle this in the exact same way as vmalloc (we know
-	 * that the mapping is there and is valid so no need to
-	 * call handle_mm_fault).
-	 */
-	if (cris_signal_return_page &&
-	    address == cris_signal_return_page &&
-	    !protection && user_mode(regs))
-		goto vmalloc_fault;
-
-	/* we can and should enable interrupts at this point */
-	local_irq_enable();
-
-	mm = tsk->mm;
-	info.si_code = SEGV_MAPERR;
-
-	/*
-	 * If we're in an interrupt, have pagefaults disabled or have no
-	 * user context, we must not take the fault.
-	 */
-
-	if (faulthandler_disabled() || !mm)
-		goto no_context;
-
-	if (user_mode(regs))
-		flags |= FAULT_FLAG_USER;
-retry:
-	down_read(&mm->mmap_sem);
-	vma = find_vma(mm, address);
-	if (!vma)
-		goto bad_area;
-	if (vma->vm_start <= address)
-		goto good_area;
-	if (!(vma->vm_flags & VM_GROWSDOWN))
-		goto bad_area;
-	if (user_mode(regs)) {
-		/*
-		 * accessing the stack below usp is always a bug.
-		 * we get page-aligned addresses so we can only check
-		 * if we're within a page from usp, but that might be
-		 * enough to catch brutal errors at least.
-		 */
-		if (address + PAGE_SIZE < rdusp())
-			goto bad_area;
-	}
-	if (expand_stack(vma, address))
-		goto bad_area;
-
-	/*
-	 * Ok, we have a good vm_area for this memory access, so
-	 * we can handle it..
-	 */
-
- good_area:
-	info.si_code = SEGV_ACCERR;
-
-	/* first do some preliminary protection checks */
-
-	if (writeaccess == 2){
-		if (!(vma->vm_flags & VM_EXEC))
-			goto bad_area;
-	} else if (writeaccess == 1) {
-		if (!(vma->vm_flags & VM_WRITE))
-			goto bad_area;
-		flags |= FAULT_FLAG_WRITE;
-	} else {
-		if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
-			goto bad_area;
-	}
-
-	/*
-	 * If for any reason at all we couldn't handle the fault,
-	 * make sure we exit gracefully rather than endlessly redo
-	 * the fault.
-	 */
-
-	fault = handle_mm_fault(vma, address, flags);
-
-	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
-		return;
-
-	if (unlikely(fault & VM_FAULT_ERROR)) {
-		if (fault & VM_FAULT_OOM)
-			goto out_of_memory;
-		else if (fault & VM_FAULT_SIGSEGV)
-			goto bad_area;
-		else if (fault & VM_FAULT_SIGBUS)
-			goto do_sigbus;
-		BUG();
-	}
-
-	if (flags & FAULT_FLAG_ALLOW_RETRY) {
-		if (fault & VM_FAULT_MAJOR)
-			tsk->maj_flt++;
-		else
-			tsk->min_flt++;
-		if (fault & VM_FAULT_RETRY) {
-			flags &= ~FAULT_FLAG_ALLOW_RETRY;
-			flags |= FAULT_FLAG_TRIED;
-
-			/*
-			 * No need to up_read(&mm->mmap_sem) as we would
-			 * have already released it in __lock_page_or_retry
-			 * in mm/filemap.c.
-			 */
-
-			goto retry;
-		}
-	}
-
-	up_read(&mm->mmap_sem);
-	return;
-
-	/*
-	 * Something tried to access memory that isn't in our memory map..
-	 * Fix it, but check if it's kernel or user first..
-	 */
-
- bad_area:
-	up_read(&mm->mmap_sem);
-
- bad_area_nosemaphore:
-	DPG(show_registers(regs));
-
-	/* User mode accesses just cause a SIGSEGV */
-
-	if (user_mode(regs)) {
-#ifdef CONFIG_NO_SEGFAULT_TERMINATION
-		DECLARE_WAIT_QUEUE_HEAD(wq);
-#endif
-		printk(KERN_NOTICE "%s (pid %d) segfaults for page "
-			"address %08lx at pc %08lx\n",
-			tsk->comm, tsk->pid,
-			address, instruction_pointer(regs));
-
-		/* With DPG on, we've already dumped registers above.  */
-		DPG(if (0))
-			show_registers(regs);
-
-#ifdef CONFIG_NO_SEGFAULT_TERMINATION
-		wait_event_interruptible(wq, 0 == 1);
-#else
-		info.si_signo = SIGSEGV;
-		info.si_errno = 0;
-		/* info.si_code has been set above */
-		info.si_addr = (void *)address;
-		force_sig_info(SIGSEGV, &info, tsk);
-#endif
-		return;
-	}
-
- no_context:
-
-	/* Are we prepared to handle this kernel fault?
-	 *
-	 * (The kernel has valid exception-points in the source
-	 *  when it accesses user-memory. When it fails in one
-	 *  of those points, we find it in a table and do a jump
-	 *  to some fixup code that loads an appropriate error
-	 *  code)
-	 */
-
-	if (find_fixup_code(regs))
-		return;
-
-	/*
-	 * Oops. The kernel tried to access some bad page. We'll have to
-	 * terminate things with extreme prejudice.
-	 */
-
-	if (!oops_in_progress) {
-		oops_in_progress = 1;
-		if ((unsigned long) (address) < PAGE_SIZE)
-			printk(KERN_ALERT "Unable to handle kernel NULL "
-				"pointer dereference");
-		else
-			printk(KERN_ALERT "Unable to handle kernel access"
-				" at virtual address %08lx\n", address);
-
-		die_if_kernel("Oops", regs, (writeaccess << 1) | protection);
-		oops_in_progress = 0;
-	}
-
-	do_exit(SIGKILL);
-
-	/*
-	 * We ran out of memory, or some other thing happened to us that made
-	 * us unable to handle the page fault gracefully.
-	 */
-
- out_of_memory:
-	up_read(&mm->mmap_sem);
-	if (!user_mode(regs))
-		goto no_context;
-	pagefault_out_of_memory();
-	return;
-
- do_sigbus:
-	up_read(&mm->mmap_sem);
-
-	/*
-	 * Send a sigbus, regardless of whether we were in kernel
-	 * or user mode.
-	 */
-	info.si_signo = SIGBUS;
-	info.si_errno = 0;
-	info.si_code = BUS_ADRERR;
-	info.si_addr = (void *)address;
-	force_sig_info(SIGBUS, &info, tsk);
-
-	/* Kernel mode? Handle exceptions or die */
-	if (!user_mode(regs))
-		goto no_context;
-	return;
-
-vmalloc_fault:
-	{
-		/*
-		 * Synchronize this task's top level page-table
-		 * with the 'reference' page table.
-		 *
-		 * Use current_pgd instead of tsk->active_mm->pgd
-		 * since the latter might be unavailable if this
-		 * code is executed in a misfortunately run irq
-		 * (like inside schedule() between switch_mm and
-		 *  switch_to...).
-		 */
-
-		int offset = pgd_index(address);
-		pgd_t *pgd, *pgd_k;
-		pud_t *pud, *pud_k;
-		pmd_t *pmd, *pmd_k;
-		pte_t *pte_k;
-
-		pgd = (pgd_t *)per_cpu(current_pgd, smp_processor_id()) + offset;
-		pgd_k = init_mm.pgd + offset;
-
-		/* Since we're two-level, we don't need to do both
-		 * set_pgd and set_pmd (they do the same thing). If
-		 * we go three-level at some point, do the right thing
-		 * with pgd_present and set_pgd here.
-		 *
-		 * Also, since the vmalloc area is global, we don't
-		 * need to copy individual PTE's, it is enough to
-		 * copy the pgd pointer into the pte page of the
-		 * root task. If that is there, we'll find our pte if
-		 * it exists.
-		 */
-
-		pud = pud_offset(pgd, address);
-		pud_k = pud_offset(pgd_k, address);
-		if (!pud_present(*pud_k))
-			goto no_context;
-
-		pmd = pmd_offset(pud, address);
-		pmd_k = pmd_offset(pud_k, address);
-
-		if (!pmd_present(*pmd_k))
-			goto bad_area_nosemaphore;
-
-		set_pmd(pmd, *pmd_k);
-
-		/* Make sure the actual PTE exists as well to
-		 * catch kernel vmalloc-area accesses to non-mapped
-		 * addresses. If we don't do this, this will just
-		 * silently loop forever.
-		 */
-
-		pte_k = pte_offset_kernel(pmd_k, address);
-		if (!pte_present(*pte_k))
-			goto no_context;
-
-		return;
-	}
-}
-
-/* Find fixup code. */
-int
-find_fixup_code(struct pt_regs *regs)
-{
-	const struct exception_table_entry *fixup;
-	/* in case of delay slot fault (v32) */
-	unsigned long ip = (instruction_pointer(regs) & ~0x1);
-
-	fixup = search_exception_tables(ip);
-	if (fixup != 0) {
-		/* Adjust the instruction pointer in the stackframe. */
-		instruction_pointer(regs) = fixup->fixup;
-		arch_fixup(regs);
-		return 1;
-	}
-
-	return 0;
-}