Merge tag 'stm32-dt-for-v6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt

STM32 DT for v6.15, round 1

Highlights:
----------

- MPU:
  - STM32MP13:
    - Add thermal support.
    - Add Priva E-Measuringbox board support based on sTM32MP133C SoC.
      It embeds Ethernet RMII with TI phy, SDCard, eMMC and some
      sensors.
    - Add support for DHCOR SoM and DHSBC rev.200 board:
      TPM interrupts and gpio reset + LDO2/LDO5 support.

  - STMP32MP15:
    - Add new Octavo support: LXA FairyTux 2 based on OSD32MP153C SiP.
      It contains eMMC for storage, a gigabit Ethernet, a CAN bus and
      a RS485 transceiver.
    - Add Plymovent AQM board based on STM32MP151 SoC. It embeds:
      ETH RMII, WLAN, BT, Sensors (CO2, PM, pressure), Audio (I2S),
      Storage (SDCard, eMMC).

  - STM32MP25:
    - Add STM32MP257F Discovery board: It embeds a STM32MP257FAL SoC,
      with 4GB of LPDDR4, 2*USB typeA, 1*USB3 typeC, 1*ETH,
      wifi/BT combo, DSI HDMI, LVDS connector ...

    - Introduce STM32MP23 SoC and add STM32MP235F Discovery board:
      It embeds a STM32MP235FAK SoC, with 4GB of LPDDR4, 2*USB typeA,
      1*USB3 typeC, 1*ETH, wifi/BT combo, DSI HDMI, LVDS connector ...

    - Introduce STM32MP21 SoC and STM32MP215F discovery board:
      It embeds a STM32MP235FAN SoC, with 2GB of LPDDR4,
      1*USB2 peripheral bus powered typeC, 1*ETH, wifi/BT combo,
      LCD 18bit connector, CSI camera connector, ...

* tag 'stm32-dt-for-v6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (26 commits)
  arm64: dts: st: add stm32mp215f-dk board support
  dt-bindings: stm32: document stm32mp215f-dk board
  arm64: dts: st: introduce stm32mp21 SoCs family
  arm64: dts: st: add stm32mp235f-dk board support
  dt-bindings: stm32: document stm32mp235f-dk board
  arm64: dts: st: introduce stm32mp23 SoCs family
  dt-bindings: stm32: add STM32MP21 and STM32MP23 compatibles for syscon
  arm64: Kconfig: expand STM32 Armv8 SoC with STM32MP21/STM32MP23 SoCs family
  arm64: dts: st: add stm32mp257f-dk board support
  dt-bindings: stm32: document stm32mp257f-dk board
  ARM: dts: stm32: Add Plymovent AQM devicetree
  ARM: dts: stm32: Add pinmux groups for Plymovent AQM board
  dt-bindings: arm: stm32: Add Plymovent AQM board
  dt-bindings: sound: convert ICS-43432 binding to YAML
  ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC rev.200 board
  ARM: dts: stm32: use IRQ_TYPE_EDGE_FALLING on stm32mp157c-dk2
  ARM: dts: stm32: add usr3 LED node to stm32f769-disco
  ARM: dts: stm32: rename LEDs nodes for stm32f769-disco
  ARM: dts: stm32: add push button to stm32f746 Discovery board
  ARM: dts: stm32: add led to stm32f746 Discovery board
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

5 files changed, 77 insertions, 19 deletions

diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
index d083d8ad48b7..ed97652c8492 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
@@ -21,6 +21,8 @@ properties:
               - st,stm32f4-gcan
               - st,stm32mp151-pwr-mcu
               - st,stm32mp157-syscfg
+              - st,stm32mp21-syscfg
+              - st,stm32mp23-syscfg
               - st,stm32mp25-syscfg
           - const: syscon
       - items:
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index b6c56d4ce6b9..5fee2f38ff25 100644
--- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -51,9 +51,16 @@ properties:
               - st,stm32mp135f-dk
           - const: st,stm32mp135
 
+      - description: ST STM32MP133 based Boards
+        items:
+          - enum:
+              - pri,prihmb   # Priva E-Measuringbox board
+          - const: st,stm32mp133
+
       - description: ST STM32MP151 based Boards
         items:
           - enum:
+              - ply,plyaqm   # Plymovent AQM board
               - prt,mecio1r0 # Protonic MECIO1r0
               - prt,mect1s   # Protonic MECT1S
               - prt,prtt1a   # Protonic PRTT1A
@@ -94,6 +101,8 @@ properties:
       - description: Octavo OSD32MP153 System-in-Package based boards
         items:
           - enum:
+              - lxa,stm32mp153c-fairytux2-gen1 # Linux Automation FairyTux 2 (Generation 1)
+              - lxa,stm32mp153c-fairytux2-gen2 # Linux Automation FairyTux 2 (Generation 2)
               - lxa,stm32mp153c-tac-gen3 # Linux Automation TAC (Generation 3)
           - const: oct,stm32mp153x-osd32
           - const: st,stm32mp153
@@ -178,9 +187,22 @@ properties:
       - description: ST STM32MP257 based Boards
         items:
           - enum:
+              - st,stm32mp257f-dk
               - st,stm32mp257f-ev1
           - const: st,stm32mp257
 
+      - description: ST STM32MP235 based Boards
+        items:
+          - enum:
+              - st,stm32mp235f-dk
+          - const: st,stm32mp235
+
+      - description: ST STM32MP215 based Boards
+        items:
+          - enum:
+              - st,stm32mp215f-dk
+          - const: st,stm32mp215
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/sound/ics43432.txt b/Documentation/devicetree/bindings/sound/ics43432.txt
deleted file mode 100644
index e6f05f2f6c4e..000000000000
--- a/Documentation/devicetree/bindings/sound/ics43432.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Invensense ICS-43432-compatible MEMS microphone with I2S output.
-
-There are no software configuration options for this device, indeed, the only
-host connection is the I2S interface. Apart from requirements on clock
-frequency (460 kHz to 3.379 MHz according to the data sheet) there must be
-64 clock cycles in each stereo output frame; 24 of the 32 available bits
-contain audio data. A hardware pin determines if the device outputs data
-on the left or right channel of the I2S frame.
-
-Required properties:
-  - compatible: should be one of the following.
-     "invensense,ics43432": For the Invensense ICS43432
-     "cui,cmm-4030d-261": For the CUI CMM-4030D-261-I2S-TR
-
-Example:
-
-	ics43432: ics43432 {
-		compatible = "invensense,ics43432";
-	};
diff --git a/Documentation/devicetree/bindings/sound/invensense,ics43432.yaml b/Documentation/devicetree/bindings/sound/invensense,ics43432.yaml
new file mode 100644
index 000000000000..7bd984817aa9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/invensense,ics43432.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/invensense,ics43432.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Invensense ICS-43432-compatible MEMS Microphone with I2S Output
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description:
+  The ICS-43432 and compatible MEMS microphones output audio over an I2S
+  interface and require no software configuration. The only host connection
+  is the I2S bus. The microphone requires an I2S clock frequency between
+  460 kHz and 3.379 MHz and 64 clock cycles per stereo frame. Each frame
+  contains 32-bit slots per channel, with 24 bits carrying audio data.
+  A hardware pin determines whether the microphone outputs audio on the
+  left or right channel of the I2S frame.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - invensense,ics43432
+      - cui,cmm-4030d-261
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ics43432: ics43432 {
+        compatible = "invensense,ics43432";
+
+        port {
+          endpoint {
+            remote-endpoint = <&i2s1_endpoint>;
+            dai-format = "i2s";
+          };
+        };
+
+    };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 6bf38f39724e..9b47a418f05b 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1204,6 +1204,8 @@ patternProperties:
     description: Primux Trading, S.L.
   "^probox2,.*":
     description: PROBOX2 (by W2COMP Co., Ltd.)
+  "^pri,.*":
+    description: Priva
   "^prt,.*":
     description: Protonic Holland
   "^pulsedlight,.*":