Merge tag 'asoc-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v6.15

This is a very big release due to a combination of some big new work,
mainly new drivers and generic SoundWire support, and some wide ranging
cleanup work that made small changes to a lot of drivers.

 - Morimoto-san has completed the conversion to use modern terminology
   for the clocking configuration, and several other cleanups with
   narrower impact.
 - All the power management operation configuration was updated to use
   current idioms by Takashi Iwai.
 - Clarification of the control operations from Charles Keepax.
 - Prepartory work for more generic SoundWire SCDA controls from Charles
   Keepax.
 - Support for AMD ACP 7.x, AWINC WM88166, Everest ES8388, Intel AVS
   PEAKVOL and GAIN DSP modules Mediatek MT8188 DMIC, NXP i.MX95, nVidia
   Tegra interconnects, Rockchip RK3588 S/PDIF, Texas Instruments
   SN012776 and TAS5770L, and Wolfson WM8904 DMICs,

Some changes from the tip tree adding APIs needed by the AMD code are
included, these were unfortunately rebased in the tip tree after being
pulled in.  There's also some regmap changes supporting the SCDA work
and some devres refactoring that was pulled in to support other changes.

40 files changed, 871 insertions, 183 deletions

diff --git a/Documentation/admin-guide/README.rst b/Documentation/admin-guide/README.rst
index eb94526689091..b557cf1c820d2 100644
--- a/Documentation/admin-guide/README.rst
+++ b/Documentation/admin-guide/README.rst
@@ -176,7 +176,7 @@ Configuring the kernel
                         values without prompting.
 
      "make defconfig"   Create a ./.config file by using the default
-                        symbol values from either arch/$ARCH/defconfig
+                        symbol values from either arch/$ARCH/configs/defconfig
                         or arch/$ARCH/configs/${PLATFORM}_defconfig,
                         depending on the architecture.
 
diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst
index a43b78b4b6464..dd49a89a62d35 100644
--- a/Documentation/admin-guide/sysctl/kernel.rst
+++ b/Documentation/admin-guide/sysctl/kernel.rst
@@ -212,6 +212,17 @@ pid>/``).
 This value defaults to 0.
 
 
+core_sort_vma
+=============
+
+The default coredump writes VMAs in address order. By setting
+``core_sort_vma`` to 1, VMAs will be written from smallest size
+to largest size. This is known to break at least elfutils, but
+can be handy when dealing with very large (and truncated)
+coredumps where the more useful debugging details are included
+in the smaller VMAs.
+
+
 core_uses_pid
 =============
 
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index ab5881d0d017f..52d3f1ce33678 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -146,6 +146,7 @@ properties:
     maxItems: 2
 
   pwm-names:
+    minItems: 1
     items:
       - const: convst1
       - const: convst2
diff --git a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
index e24cbd9609933..bd8ede3a4ad89 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
@@ -19,6 +19,7 @@ properties:
       - imagis,ist3038
       - imagis,ist3038b
       - imagis,ist3038c
+      - imagis,ist3038h
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
index 190230216de84..f00827c9b67ff 100644
--- a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
+++ b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
@@ -31,6 +31,10 @@ node must be named "audio-codec".
 Required properties for the audio-codec subnode:
 
 - #sound-dai-cells = <1>;
+- interrupts		: should contain jack detection interrupts, with headset
+			  detect interrupt matching "hs" and microphone bias 2
+			  detect interrupt matching "mb2" in interrupt-names.
+- interrupt-names	: Contains "hs", "mb2"
 
 The audio-codec provides two DAIs. The first one is connected to the
 Stereo HiFi DAC and the second one is connected to the Voice DAC.
@@ -52,6 +56,8 @@ Example:
 
 		audio-codec {
 			#sound-dai-cells = <1>;
+			interrupts-extended = <&cpcap 9 0>, <&cpcap 10 0>;
+			interrupt-names = "hs", "mb2";
 
 			/* HiFi */
 			port@0 {
diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
deleted file mode 100644
index f9fb412642fe0..0000000000000
--- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Atmel SSC driver.
-
-Required properties:
-- compatible: "atmel,at91rm9200-ssc" or "atmel,at91sam9g45-ssc"
-	- atmel,at91rm9200-ssc: support pdc transfer
-	- atmel,at91sam9g45-ssc: support dma transfer
-- reg: Should contain SSC registers location and length
-- interrupts: Should contain SSC interrupt
-- clock-names: tuple listing input clock names.
-	Required elements: "pclk"
-- clocks: phandles to input clocks.
-
-
-Required properties for devices compatible with "atmel,at91sam9g45-ssc":
-- dmas: DMA specifier, consisting of a phandle to DMA controller node,
-  the memory interface and SSC DMA channel ID (for tx and rx).
-  See Documentation/devicetree/bindings/dma/atmel-dma.txt for details.
-- dma-names: Must be "tx", "rx".
-
-Optional properties:
-  - atmel,clk-from-rk-pin: bool property.
-     - When SSC works in slave mode, according to the hardware design, the
-       clock can get from TK pin, and also can get from RK pin. So, add
-       this parameter to choose where the clock from.
-     - By default the clock is from TK pin, if the clock from RK pin, this
-       property is needed.
-  - #sound-dai-cells: Should contain <0>.
-     - This property makes the SSC into an automatically registered DAI.
-
-Examples:
-- PDC transfer:
-ssc0: ssc@fffbc000 {
-	compatible = "atmel,at91rm9200-ssc";
-	reg = <0xfffbc000 0x4000>;
-	interrupts = <14 4 5>;
-	clocks = <&ssc0_clk>;
-	clock-names = "pclk";
-};
-
-- DMA transfer:
-ssc0: ssc@f0010000 {
-      compatible = "atmel,at91sam9g45-ssc";
-      reg = <0xf0010000 0x4000>;
-      interrupts = <28 4 5>;
-      dmas = <&dma0 1 13>,
-	     <&dma0 1 14>;
-      dma-names = "tx", "rx";
-      pinctrl-names = "default";
-      pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-};
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
index ccae64ce30719..b4eca702febc7 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
@@ -102,6 +102,10 @@ properties:
     maxItems: 1
     description: GPIO to enable the external amplifier
 
+  hp-det-gpios:
+    maxItems: 1
+    description: GPIO for headphone/line-out detection
+
 required:
   - "#sound-dai-cells"
   - compatible
@@ -251,8 +255,10 @@ allOf:
         allwinner,audio-routing:
           items:
             enum:
+              - Headphone
               - LINEOUT
               - Line Out
+              - Speaker
 
         dmas:
           items:
diff --git a/Documentation/devicetree/bindings/sound/atmel,at91-ssc.yaml b/Documentation/devicetree/bindings/sound/atmel,at91-ssc.yaml
new file mode 100644
index 0000000000000..a05e614318242
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel,at91-ssc.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,at91-ssc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Serial Synchronous Serial (SSC)
+
+maintainers:
+  - Andrei Simion <andrei.simion@microchip.com>
+
+description:
+  The Atmel Synchronous Serial Controller (SSC) provides a versatile
+  synchronous communication link for audio and telecom applications,
+  supporting protocols like I2S, Short Frame Sync, and Long Frame Sync.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91rm9200-ssc
+      - atmel,at91sam9g45-ssc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pclk
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  atmel,clk-from-rk-pin:
+    description:
+      Specify the clock source for the SSC (Synchronous Serial Controller)
+      when operating in slave mode. By default, the clock is sourced from
+      the TK pin.
+    type: boolean
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - atmel,at91sam9g45-ssc
+    then:
+      required:
+        - dmas
+        - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    ssc@100000 {
+       compatible = "atmel,at91sam9g45-ssc";
+       reg = <0x100000 0x4000>;
+       interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+       dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+                     AT91_XDMAC_DT_PERID(38))>,
+              <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+                     AT91_XDMAC_DT_PERID(39))>;
+       dma-names = "tx", "rx";
+       clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+       clock-names = "pclk";
+       #sound-dai-cells = <0>;
+    };
+
+    ssc@c00000 {
+      compatible = "atmel,at91rm9200-ssc";
+      reg = <0xc00000 0x4000>;
+      interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+      clock-names = "pclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/atmel,at91sam9g20ek-wm8731.yaml b/Documentation/devicetree/bindings/sound/atmel,at91sam9g20ek-wm8731.yaml
new file mode 100644
index 0000000000000..627da2d890b24
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel,at91sam9g20ek-wm8731.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,at91sam9g20ek-wm8731.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel at91sam9g20ek wm8731 audio complex
+
+maintainers:
+  - Balakrishnan Sambath <balakrishnan.s@microchip.com>
+
+description:
+  The audio complex configuration for Atmel at91sam9g20ek with WM8731 audio codec.
+
+properties:
+  compatible:
+    const: atmel,at91sam9g20ek-wm8731-audio
+
+  atmel,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: The user-visible name of this sound complex.
+
+  atmel,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: A list of the connections between audio components.
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        # Board Connectors
+        - Ext Spk
+        - Int Mic
+
+        # CODEC Pins
+        - LOUT
+        - ROUT
+        - LHPOUT
+        - RHPOUT
+        - LLINEIN
+        - RLINEIN
+        - MICIN
+
+  atmel,ssc-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the SSC controller.
+
+  atmel,audio-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of WM8731 audio codec.
+
+required:
+  - compatible
+  - atmel,model
+  - atmel,audio-routing
+  - atmel,ssc-controller
+  - atmel,audio-codec
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "atmel,at91sam9g20ek-wm8731-audio";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_pck0_as_mck>;
+        atmel,model = "wm8731 @ AT91SAMG20EK";
+        atmel,audio-routing =
+            "Ext Spk", "LHPOUT",
+            "Int Mic", "MICIN";
+        atmel,ssc-controller = <&ssc0>;
+        atmel,audio-codec = <&wm8731>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt b/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt
deleted file mode 100644
index 9c5a9947b64d4..0000000000000
--- a/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-* Atmel at91sam9g20ek wm8731 audio complex
-
-Required properties:
-  - compatible: "atmel,at91sam9g20ek-wm8731-audio"
-  - atmel,model: The user-visible name of this sound complex.
-  - atmel,audio-routing: A list of the connections between audio components.
-  - atmel,ssc-controller: The phandle of the SSC controller
-  - atmel,audio-codec: The phandle of the WM8731 audio codec
-Optional properties:
-  - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
-
-Example:
-sound {
-	compatible = "atmel,at91sam9g20ek-wm8731-audio";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pck0_as_mck>;
-
-	atmel,model = "wm8731 @ AT91SAMG20EK";
-
-	atmel,audio-routing =
-		"Ext Spk", "LHPOUT",
-		"Int MIC", "MICIN";
-
-	atmel,ssc-controller = <&ssc0>;
-	atmel,audio-codec = <&wm8731>;
-};
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
index f943f90d8b150..94588353f852a 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
@@ -37,6 +37,10 @@ properties:
   codec2codec:
     type: object
     description: Codec to Codec node
+  hp-det-gpios:
+    $ref: audio-graph.yaml#/properties/hp-det-gpios
+  widgets:
+    $ref: audio-graph.yaml#/properties/widgets
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml b/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml
index 6676406bf2dea..bb92d6ca31445 100644
--- a/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml
+++ b/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml
@@ -19,6 +19,7 @@ properties:
     enum:
       - awinic,aw88081
       - awinic,aw88083
+      - awinic,aw88166
       - awinic,aw88261
       - awinic,aw88395
       - awinic,aw88399
diff --git a/Documentation/devicetree/bindings/sound/dmic-codec.yaml b/Documentation/devicetree/bindings/sound/dmic-codec.yaml
index 59ef0cf6b6e5e..cc3c84dd4c26f 100644
--- a/Documentation/devicetree/bindings/sound/dmic-codec.yaml
+++ b/Documentation/devicetree/bindings/sound/dmic-codec.yaml
@@ -19,6 +19,9 @@ properties:
   '#sound-dai-cells':
     const: 0
 
+  vref-supply:
+    description: Phandle to the digital microphone reference supply
+
   dmicen-gpios:
     description: GPIO specifier for DMIC to control start and stop
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/sound/everest,es8328.yaml b/Documentation/devicetree/bindings/sound/everest,es8328.yaml
index ed18e40dcaacf..ddddd7b143ab3 100644
--- a/Documentation/devicetree/bindings/sound/everest,es8328.yaml
+++ b/Documentation/devicetree/bindings/sound/everest,es8328.yaml
@@ -24,9 +24,13 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - everest,es8328
-      - everest,es8388
+    oneOf:
+      - enum:
+          - everest,es8328
+      - items:
+          - enum:
+              - everest,es8388
+          - const: everest,es8328
 
   reg:
     maxItems: 1
@@ -56,6 +60,7 @@ properties:
 
 required:
   - compatible
+  - reg
   - clocks
   - DVDD-supply
   - AVDD-supply
diff --git a/Documentation/devicetree/bindings/sound/fsl,audmix.yaml b/Documentation/devicetree/bindings/sound/fsl,audmix.yaml
index 9413b901cf778..3ad197b3c82c6 100644
--- a/Documentation/devicetree/bindings/sound/fsl,audmix.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,audmix.yaml
@@ -61,13 +61,26 @@ properties:
       - description: serial audio input 2
         maxItems: 1
 
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    patternProperties:
+      '^port@[0-1]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: Input port from SAI TX
+
+    properties:
+      port@2:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: Output port to SAI RX
+
 required:
   - compatible
   - reg
   - clocks
   - clock-names
   - power-domains
-  - dais
 
 unevaluatedProperties: false
 
@@ -80,4 +93,50 @@ examples:
       clock-names = "ipg";
       power-domains = <&pd_audmix>;
       dais = <&sai4>, <&sai5>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+          playback-only;
+
+          amix_endpoint0: endpoint {
+            dai-tdm-slot-num = <8>;
+            dai-tdm-slot-width = <32>;
+            dai-tdm-slot-width-map = <32 8 32>;
+            dai-format = "dsp_a";
+            remote-endpoint = <&be00_ep>;
+          };
+        };
+
+        port@1 {
+          reg = <1>;
+          playback-only;
+
+          amix_endpoint1: endpoint {
+            dai-tdm-slot-num = <8>;
+            dai-tdm-slot-width = <32>;
+            dai-tdm-slot-width-map = <32 8 32>;
+            dai-format = "dsp_a";
+            remote-endpoint = <&be01_ep>;
+          };
+        };
+
+        port@2 {
+          reg = <2>;
+          capture-only;
+
+          amix_endpoint2: endpoint {
+            dai-tdm-slot-num = <8>;
+            dai-tdm-slot-width = <32>;
+            dai-tdm-slot-width-map = <32 8 32>;
+            dai-format = "dsp_a";
+            bitclock-master;
+            frame-master;
+            remote-endpoint = <&be02_ep>;
+          };
+        };
+      };
     };
diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
index c454110f42816..8f1108e7e14e2 100644
--- a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
@@ -80,7 +80,10 @@ required:
   - fsl,asrc-rate
   - fsl,asrc-format
 
-additionalProperties: false
+allOf:
+  - $ref: dai-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml b/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
index 76aa1f2484883..85799f83e65f1 100644
--- a/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
@@ -77,6 +77,10 @@ properties:
   power-domains:
     maxItems: 1
 
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
   fsl,asrc-rate:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: The mutual sample rate used by DPCM Back Ends
@@ -120,6 +124,7 @@ required:
   - fsl,asrc-width
 
 allOf:
+  - $ref: dai-common.yaml#
   - if:
       properties:
         compatible:
@@ -145,7 +150,7 @@ allOf:
       required:
         - power-domains
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -173,4 +178,12 @@ examples:
                     "txa", "txb", "txc";
         fsl,asrc-rate  = <48000>;
         fsl,asrc-width = <16>;
+
+        port {
+            playback-only;
+
+            asrc_endpoint: endpoint {
+                remote-endpoint = <&fe00_ep>;
+            };
+       };
     };
diff --git a/Documentation/devicetree/bindings/sound/fsl,imx95-cm7-sof.yaml b/Documentation/devicetree/bindings/sound/fsl,imx95-cm7-sof.yaml
new file mode 100644
index 0000000000000..f00ae3219e150
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,imx95-cm7-sof.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,imx95-cm7-sof.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP imx95 CM7 core
+
+maintainers:
+  - Daniel Baluta <daniel.baluta@nxp.com>
+
+description: NXP imx95 CM7 core used for audio processing
+
+properties:
+  compatible:
+    const: fsl,imx95-cm7-sof
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: sram
+
+  memory-region:
+    maxItems: 1
+
+  memory-region-names:
+    const: dma
+
+  port:
+    description: SAI3 port
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - memory-region
+  - memory-region-names
+  - port
+
+allOf:
+  - $ref: fsl,sof-cpu.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    cm7-cpu@80000000 {
+        compatible = "fsl,imx95-cm7-sof";
+        reg = <0x80000000 0x6100000>;
+        reg-names = "sram";
+        mboxes = <&mu7 2 0>, <&mu7 2 1>, <&mu7 3 0>, <&mu7 3 1>;
+        mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1";
+        memory-region = <&adma_res>;
+        memory-region-names = "dma";
+        port {
+            /* SAI3-WM8962 link */
+            endpoint {
+                remote-endpoint = <&wm8962_ep>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,sai.yaml b/Documentation/devicetree/bindings/sound/fsl,sai.yaml
index e16e52c9f58c7..0d733e5b08a4e 100644
--- a/Documentation/devicetree/bindings/sound/fsl,sai.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,sai.yaml
@@ -97,6 +97,24 @@ properties:
     items:
       - description: receive and transmit interrupt
 
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: port for TX and RX
+
+      port@1:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: port for TX only
+
+      port@2:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: port for RX only
+
   big-endian:
     description: |
       required if all the SAI registers are big-endian rather than little-endian.
@@ -208,4 +226,37 @@ examples:
         dma-names = "rx", "tx";
         fsl,dataline = <1 0xff 0xff 2 0xff 0x11>;
         #sound-dai-cells = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@1 {
+                reg = <1>;
+                playback-only;
+
+                sai1_endpoint0: endpoint {
+                   dai-tdm-slot-num = <8>;
+                   dai-tdm-slot-width = <32>;
+                   dai-tdm-slot-width-map = <32 8 32>;
+                   dai-format = "dsp_a";
+                   bitclock-master;
+                   frame-master;
+                   remote-endpoint = <&mcodec01_ep>;
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+                capture-only;
+
+                sai1_endpoint1: endpoint {
+                    dai-tdm-slot-num = <8>;
+                    dai-tdm-slot-width = <32>;
+                    dai-tdm-slot-width-map = <32 8 32>;
+                    dai-format = "dsp_a";
+                    remote-endpoint = <&fe02_ep>;
+                };
+            };
+        };
     };
diff --git a/Documentation/devicetree/bindings/sound/fsl,sof-cpu.yaml b/Documentation/devicetree/bindings/sound/fsl,sof-cpu.yaml
new file mode 100644
index 0000000000000..31863932dbc3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,sof-cpu.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,sof-cpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP audio processor common properties
+
+maintainers:
+  - Daniel Baluta <daniel.baluta@nxp.com>
+
+properties:
+  mboxes:
+    maxItems: 4
+
+  mbox-names:
+    items:
+      - const: txdb0
+      - const: txdb1
+      - const: rxdb0
+      - const: rxdb1
+
+required:
+  - mboxes
+  - mbox-names
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-card.yaml b/Documentation/devicetree/bindings/sound/imx-audio-card.yaml
index f7ad5ea2491e0..3c75c8c789870 100644
--- a/Documentation/devicetree/bindings/sound/imx-audio-card.yaml
+++ b/Documentation/devicetree/bindings/sound/imx-audio-card.yaml
@@ -46,6 +46,14 @@ patternProperties:
         description: see tdm-slot.txt.
         $ref: /schemas/types.yaml#/definitions/uint32
 
+      playback-only:
+        description: link is used only for playback
+        $ref: /schemas/types.yaml#/definitions/flag
+
+      capture-only:
+        description: link is used only for capture
+        $ref: /schemas/types.yaml#/definitions/flag
+
       cpu:
         description: Holds subnode which indicates cpu dai.
         type: object
@@ -71,6 +79,12 @@ patternProperties:
       - link-name
       - cpu
 
+    allOf:
+      - not:
+          required:
+            - playback-only
+            - capture-only
+
     additionalProperties: false
 
 required:
diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
index 362e729b51b43..76d5a437dc8f4 100644
--- a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
+++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
@@ -40,6 +40,14 @@ properties:
       hardware that provides additional audio functionalities if present.
       The AFE will link to ADSP when the phandle is provided.
 
+  mediatek,accdet:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle to the MT6359 accessory detection block, which detects audio
+      jack insertion and removal. This property should only be present if the
+      accdet block is actually wired to the audio jack pins and to be used for
+      jack detection.
+
 patternProperties:
   "^dai-link-[0-9]+$":
     type: object
@@ -62,6 +70,7 @@ patternProperties:
             - PCM1_BE
             - DL_SRC_BE
             - UL_SRC_BE
+            - DMIC_BE
 
       codec:
         description: Holds subnode which indicates codec dai.
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml
index d3cf8f59cb232..c8543f969ebb3 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml
@@ -58,6 +58,40 @@ properties:
     items:
       enum: [1, 2, 3, 4, 5]
 
+  qcom,tx-channel-mapping:
+    description: |
+      Specifies static channel mapping between slave and master tx port
+      channels.
+      In the order of slave port channels which is adc1, adc2, adc3,
+      dmic0, dmic1, mbhc, dmic2, dmic3, dmci4, dmic5, dmic6, dmic7.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 12
+    maxItems: 12
+    additionalItems: false
+    items:
+      enum:
+        - 1  # WCD9370_SWRM_CH1
+        - 2  # WCD9370_SWRM_CH2
+        - 3  # WCD9370_SWRM_CH3
+        - 4  # WCD9370_SWRM_CH4
+
+  qcom,rx-channel-mapping:
+    description: |
+      Specifies static channels mapping between slave and master rx port
+      channels.
+      In the order of slave port channels, which is
+      hph_l, hph_r, clsh, comp_l, comp_r, lo, dsd_r, dsd_l.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 8
+    maxItems: 8
+    additionalItems: false
+    items:
+      enum:
+        - 1  # WCD9370_SWRM_CH1
+        - 2  # WCD9370_SWRM_CH2
+        - 3  # WCD9370_SWRM_CH3
+        - 4  # WCD9370_SWRM_CH4
+
 required:
   - compatible
   - reg
@@ -74,6 +108,7 @@ examples:
             compatible = "sdw20217010a00";
             reg = <0 4>;
             qcom,rx-port-mapping = <1 2 3 4 5>;
+            qcom,rx-channel-mapping = /bits/ 8 <1 2 1 1 2 1 1 2>;
         };
     };
 
@@ -85,6 +120,7 @@ examples:
             compatible = "sdw20217010a00";
             reg = <0 3>;
             qcom,tx-port-mapping = <2 2 3 4>;
+            qcom,tx-channel-mapping = /bits/ 8 <1 2 1 1 2 3 3 4 1 2 3 4>;
         };
     };
 
diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
index c3c989ef2a2c8..32dea7392e8d4 100644
--- a/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
+++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
@@ -31,6 +31,10 @@ properties:
               - rockchip,rk3288-spdif
               - rockchip,rk3308-spdif
           - const: rockchip,rk3066-spdif
+      - items:
+          - enum:
+              - rockchip,rk3588-spdif
+          - const: rockchip,rk3568-spdif
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/sound/ti,tas2770.yaml b/Documentation/devicetree/bindings/sound/ti,tas2770.yaml
index 5e7aea43acedc..8eab98a0f7a25 100644
--- a/Documentation/devicetree/bindings/sound/ti,tas2770.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,tas2770.yaml
@@ -23,6 +23,7 @@ properties:
   compatible:
     enum:
       - ti,tas2770
+      - ti,tas5770l # Apple variant
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/sound/ti,tas27xx.yaml b/Documentation/devicetree/bindings/sound/ti,tas27xx.yaml
index 5447482179c14..fcaae848e78a1 100644
--- a/Documentation/devicetree/bindings/sound/ti,tas27xx.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,tas27xx.yaml
@@ -24,6 +24,7 @@ properties:
     enum:
       - ti,tas2764
       - ti,tas2780
+      - ti,sn012776 # Apple variant of TAS2764
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8904.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8904.yaml
index 329260cf0fa08..3029a868e5e19 100644
--- a/Documentation/devicetree/bindings/sound/wlf,wm8904.yaml
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8904.yaml
@@ -38,6 +38,82 @@ properties:
   DCVDD-supply: true
   MICVDD-supply: true
 
+  wlf,in1l-as-dmicdat1:
+    type: boolean
+    description:
+      Use IN1L/DMICDAT1 as DMICDAT1, enabling the DMIC input path.
+      Can be used separately or together with wlf,in1r-as-dmicdat2.
+
+  wlf,in1r-as-dmicdat2:
+    type: boolean
+    description:
+      Use IN1R/DMICDAT2 as DMICDAT2, enabling the DMIC input path.
+      Can be used separately or together with wlf,in1l-as-dmicdat1.
+
+  wlf,gpio-cfg:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 4
+    description:
+      Default register values for R121/122/123/124 (GPIO Control).
+      If any entry has the value 0xFFFF, the related register won't be set.
+    default: [0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF]
+
+  wlf,micbias-cfg:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    description:
+      Default register values for R6/R7 (Mic Bias Control).
+    default: [0, 0]
+
+  wlf,drc-cfg-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      List of strings for the available DRC modes.
+      If absent, DRC is disabled.
+
+  wlf,drc-cfg-regs:
+    $ref: /schemas/types.yaml#/definitions/uint16-matrix
+    description:
+      Sets of default register values for R40/41/42/43 (DRC).
+      Each set corresponds to a DRC mode, so the number of sets should equal
+      the length of wlf,drc-cfg-names.
+      If absent, DRC is disabled.
+    items:
+      minItems: 4
+      maxItems: 4
+
+  wlf,retune-mobile-cfg-names:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description:
+      List of strings for the available retune modes.
+      If absent, retune is disabled.
+
+  wlf,retune-mobile-cfg-hz:
+    description:
+      The list must be the same length as wlf,retune-mobile-cfg-names.
+      If absent, retune is disabled.
+
+  wlf,retune-mobile-cfg-regs:
+    $ref: /schemas/types.yaml#/definitions/uint16-matrix
+    description:
+      Sets of default register values for R134/.../157 (EQ).
+      Each set corresponds to a retune mode, so the number of sets should equal
+      the length of wlf,retune-mobile-cfg-names.
+      If absent, retune is disabled.
+    items:
+      minItems: 24
+      maxItems: 24
+
+dependencies:
+  wlf,drc-cfg-names: [ 'wlf,drc-cfg-regs' ]
+  wlf,drc-cfg-regs: [ 'wlf,drc-cfg-names' ]
+
+  wlf,retune-mobile-cfg-names: [ 'wlf,retune-mobile-cfg-hz', 'wlf,retune-mobile-cfg-regs' ]
+  wlf,retune-mobile-cfg-regs: [ 'wlf,retune-mobile-cfg-names', 'wlf,retune-mobile-cfg-hz' ]
+  wlf,retune-mobile-cfg-hz: [ 'wlf,retune-mobile-cfg-names', 'wlf,retune-mobile-cfg-regs' ]
+
 required:
   - compatible
   - reg
@@ -70,5 +146,58 @@ examples:
             DBVDD-supply = <&reg_1p8v>;
             DCVDD-supply = <&reg_1p8v>;
             MICVDD-supply = <&reg_1p8v>;
+
+            wlf,drc-cfg-names = "default", "peaklimiter", "tradition", "soft",
+                                "music";
+            /*
+             * Config registers per name, respectively:
+             * KNEE_IP = 0,   KNEE_OP = 0,     HI_COMP = 1,   LO_COMP = 1
+             * KNEE_IP = -24, KNEE_OP = -6,    HI_COMP = 1/4, LO_COMP = 1
+             * KNEE_IP = -42, KNEE_OP = -3,    HI_COMP = 0,   LO_COMP = 1
+             * KNEE_IP = -45, KNEE_OP = -9,    HI_COMP = 1/8, LO_COMP = 1
+             * KNEE_IP = -30, KNEE_OP = -10.5, HI_COMP = 1/4, LO_COMP = 1
+             */
+            wlf,drc-cfg-regs = /bits/ 16 <0x01af 0x3248 0x0000 0x0000>,
+                               /bits/ 16 <0x04af 0x324b 0x0010 0x0408>,
+                               /bits/ 16 <0x04af 0x324b 0x0028 0x0704>,
+                               /bits/ 16 <0x04af 0x324b 0x0018 0x078c>,
+                               /bits/ 16 <0x04af 0x324b 0x0010 0x050e>;
+
+            /* GPIO1 = DMIC_CLK, don't touch others */
+            wlf,gpio-cfg = <0x0018>, <0xffff>, <0xffff>, <0xffff>;
+
+            /* Use IN1R as DMICDAT2, leave IN1L as an analog input path */
+            wlf,in1r-as-dmicdat2;
+
+            wlf,retune-mobile-cfg-names = "bassboost", "bassboost", "treble";
+            wlf,retune-mobile-cfg-hz = <48000>, <44100>, <48000>;
+            /*
+             * Config registers per name, respectively:
+             * EQ_ENA,  100 Hz,  300 Hz,  875 Hz, 2400 Hz, 6900 Hz
+             *      1,   +6 dB,   +3 dB,    0 dB,    0 dB,    0 dB
+             *      1,   +6 dB,   +3 dB,    0 dB,    0 dB,    0 dB
+             *      1,   -2 dB,   -2 dB,    0 dB,    0 dB,   +3 dB
+             * Each one uses the defaults for ReTune Mobile registers 140-157
+             */
+            wlf,retune-mobile-cfg-regs = /bits/ 16 <0x1 0x12 0xf 0xc 0xc 0xc
+                                                    0x0fca 0x0400 0x00d8 0x1eb5
+                                                    0xf145 0x0bd5 0x0075 0x1c58
+                                                    0xf3d3 0x0a54 0x0568 0x168e
+                                                    0xf829 0x07ad 0x1103 0x0564
+                                                    0x0559 0x4000>,
+
+                                         /bits/ 16 <0x1 0x12 0xf 0xc 0xc 0xc
+                                                    0x0fca 0x0400 0x00d8 0x1eb5
+                                                    0xf145 0x0bd5 0x0075 0x1c58
+                                                    0xf3d3 0x0a54 0x0568 0x168e
+                                                    0xf829 0x07ad 0x1103 0x0564
+                                                    0x0559 0x4000>,
+
+                                         /bits/ 16 <0x1 0xa 0xa 0xc 0xc 0xf
+                                                    0x0fca 0x0400 0x00d8 0x1eb5
+                                                    0xf145 0x0bd5 0x0075 0x1c58
+                                                    0xf3d3 0x0a54 0x0568 0x168e
+                                                    0xf829 0x07ad 0x1103 0x0564
+                                                    0x0559 0x4000>;
         };
     };
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml
index 62e62c335d07d..3c2b9790ffcf5 100644
--- a/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml
@@ -75,6 +75,10 @@ properties:
       enable DACLRC pin. If shared-lrclk is present, no need to enable DAC for
       captrue.
 
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/sound/xlnx,audio-formatter.txt b/Documentation/devicetree/bindings/sound/xlnx,audio-formatter.txt
deleted file mode 100644
index cbc93c8f49633..0000000000000
--- a/Documentation/devicetree/bindings/sound/xlnx,audio-formatter.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Device-Tree bindings for Xilinx PL audio formatter
-
-The IP core supports DMA, data formatting(AES<->PCM conversion)
-of audio samples.
-
-Required properties:
- - compatible: "xlnx,audio-formatter-1.0"
- - interrupt-names: Names specified to list of interrupts in same
-		    order mentioned under "interrupts".
-		    List of supported interrupt names are:
-		    "irq_mm2s" : interrupt from MM2S block
-		    "irq_s2mm" : interrupt from S2MM block
- - interrupts-parent: Phandle for interrupt controller.
- - interrupts: List of Interrupt numbers.
- - reg: Base address and size of the IP core instance.
- - clock-names: List of input clocks.
-   Required elements: "s_axi_lite_aclk", "aud_mclk"
- - clocks: Input clock specifier. Refer to common clock bindings.
-
-Example:
-	audio_ss_0_audio_formatter_0: audio_formatter@80010000 {
-		compatible = "xlnx,audio-formatter-1.0";
-		interrupt-names = "irq_mm2s", "irq_s2mm";
-		interrupt-parent = <&gic>;
-		interrupts = <0 104 4>, <0 105 4>;
-		reg = <0x0 0x80010000 0x0 0x1000>;
-		clock-names = "s_axi_lite_aclk", "aud_mclk";
-		clocks = <&clk 71>, <&clk_wiz_1 0>;
-	};
diff --git a/Documentation/devicetree/bindings/sound/xlnx,audio-formatter.yaml b/Documentation/devicetree/bindings/sound/xlnx,audio-formatter.yaml
new file mode 100644
index 0000000000000..82fa448bd2e98
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/xlnx,audio-formatter.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/xlnx,audio-formatter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx PL audio formatter
+
+description:
+  The IP core supports DMA, data formatting(AES<->PCM conversion)
+  of audio samples.
+
+maintainers:
+  - Vincenzo Frascino <vincenzo.frascino@arm.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,audio-formatter-1.0
+
+  reg:
+    maxItems: 1
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: irq_mm2s
+      - const: irq_s2mm
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: interrupt from MM2S block
+      - description: interrupt from S2MM block
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: s_axi_lite_aclk
+      - const: aud_mclk
+
+  clocks:
+    minItems: 1
+    items:
+      - description: clock for the axi data stream
+      - description: clock for the MEMS microphone data stream
+
+required:
+  - compatible
+  - reg
+  - interrupt-names
+  - interrupts
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    audio_formatter@80010000 {
+      compatible = "xlnx,audio-formatter-1.0";
+      reg = <0x80010000 0x1000>;
+      interrupt-names = "irq_mm2s", "irq_s2mm";
+      interrupt-parent = <&gic>;
+      interrupts = <0 104 4>, <0 105 4>;
+      clock-names = "s_axi_lite_aclk", "aud_mclk";
+      clocks = <&clk 71>, <&clk_wiz_1 0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/sound/xlnx,i2s.txt b/Documentation/devicetree/bindings/sound/xlnx,i2s.txt
deleted file mode 100644
index 5e7c7d5bb60a4..0000000000000
--- a/Documentation/devicetree/bindings/sound/xlnx,i2s.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Device-Tree bindings for Xilinx I2S PL block
-
-The IP supports I2S based playback/capture audio
-
-Required property:
- - compatible: "xlnx,i2s-transmitter-1.0" for playback and
-	       "xlnx,i2s-receiver-1.0" for capture
-
-Required property common to both I2S playback and capture:
- - reg: Base address and size of the IP core instance.
- - xlnx,dwidth: sample data width. Can be any of 16, 24.
- - xlnx,num-channels: Number of I2S streams. Can be any of 1, 2, 3, 4.
-		      supported channels = 2 * xlnx,num-channels
-
-Example:
-
-	i2s_receiver@a0080000 {
-		compatible = "xlnx,i2s-receiver-1.0";
-		reg = <0x0 0xa0080000 0x0 0x10000>;
-		xlnx,dwidth = <0x18>;
-		xlnx,num-channels = <1>;
-	};
-	i2s_transmitter@a0090000 {
-		compatible = "xlnx,i2s-transmitter-1.0";
-		reg = <0x0 0xa0090000 0x0 0x10000>;
-		xlnx,dwidth = <0x18>;
-		xlnx,num-channels = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/sound/xlnx,i2s.yaml b/Documentation/devicetree/bindings/sound/xlnx,i2s.yaml
new file mode 100644
index 0000000000000..3c2b0be07c538
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/xlnx,i2s.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/xlnx,i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx I2S PL block
+
+description:
+  The IP supports I2S based playback/capture audio.
+
+maintainers:
+  - Vincenzo Frascino <vincenzo.frascino@arm.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,i2s-receiver-1.0
+      - xlnx,i2s-transmitter-1.0
+
+  reg:
+    maxItems: 1
+
+  xlnx,dwidth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 16
+      - 24
+    description: |
+      Sample data width.
+
+  xlnx,num-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4
+    description: |
+      Number of I2S streams.
+
+required:
+  - compatible
+  - reg
+  - xlnx,dwidth
+  - xlnx,num-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    i2s@a0080000 {
+      compatible = "xlnx,i2s-receiver-1.0";
+      reg = <0xa0080000 0x10000>;
+      xlnx,dwidth = <0x18>;
+      xlnx,num-channels = <1>;
+    };
+    i2s@a0090000 {
+      compatible = "xlnx,i2s-transmitter-1.0";
+      reg = <0xa0090000 0x10000>;
+      xlnx,dwidth = <0x18>;
+      xlnx,num-channels = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/xlnx,spdif.txt b/Documentation/devicetree/bindings/sound/xlnx,spdif.txt
deleted file mode 100644
index 15c2d64d247c9..0000000000000
--- a/Documentation/devicetree/bindings/sound/xlnx,spdif.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Device-Tree bindings for Xilinx SPDIF IP
-
-The IP supports playback and capture of SPDIF audio
-
-Required properties:
- - compatible: "xlnx,spdif-2.0"
- - clock-names: List of input clocks.
-   Required elements: "s_axi_aclk", "aud_clk_i"
- - clocks: Input clock specifier. Refer to common clock bindings.
- - reg: Base address and address length of the IP core instance.
- - interrupts-parent: Phandle for interrupt controller.
- - interrupts: List of Interrupt numbers.
- - xlnx,spdif-mode: 0 :- receiver mode
-		    1 :- transmitter mode
- - xlnx,aud_clk_i: input audio clock value.
-
-Example:
-	spdif_0: spdif@80010000 {
-		clock-names = "aud_clk_i", "s_axi_aclk";
-		clocks = <&misc_clk_0>, <&clk 71>;
-		compatible = "xlnx,spdif-2.0";
-		interrupt-names = "spdif_interrupt";
-		interrupt-parent = <&gic>;
-		interrupts = <0 91 4>;
-		reg = <0x0 0x80010000 0x0 0x10000>;
-		xlnx,spdif-mode = <1>;
-		xlnx,aud_clk_i = <49152913>;
-	};
diff --git a/Documentation/devicetree/bindings/sound/xlnx,spdif.yaml b/Documentation/devicetree/bindings/sound/xlnx,spdif.yaml
new file mode 100644
index 0000000000000..a45d8a0755fe6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/xlnx,spdif.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/xlnx,spdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx SPDIF IP
+
+description:
+  The IP supports playback and capture of SPDIF audio.
+
+maintainers:
+  - Vincenzo Frascino <vincenzo.frascino@arm.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,spdif-2.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: SPDIF audio interrupt
+
+  clock-names:
+    items:
+      - const: aud_clk_i
+      - const: s_axi_aclk
+
+  clocks:
+    minItems: 1
+    items:
+      - description: input audio clock
+      - description: clock for the AXI data stream
+
+  xlnx,spdif-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0
+      - 1
+    description: |
+      0 - receiver
+      1 - transmitter
+
+  xlnx,aud_clk_i:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Input audio clock frequency. It affects the sampling rate.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    spdif@80010000 {
+      compatible = "xlnx,spdif-2.0";
+      reg = <0x80010000 0x10000>;
+      clock-names = "aud_clk_i", "s_axi_aclk";
+      clocks = <&misc_clk_0>, <&clk 71>;
+      interrupt-parent = <&gic>;
+      interrupts = <0 91 4>;
+      xlnx,spdif-mode = <1>;
+      xlnx,aud_clk_i = <49152913>;
+    };
+
+...
diff --git a/Documentation/filesystems/idmappings.rst b/Documentation/filesystems/idmappings.rst
index 77930c77fcfe6..2a206129f8284 100644
--- a/Documentation/filesystems/idmappings.rst
+++ b/Documentation/filesystems/idmappings.rst
@@ -63,8 +63,8 @@ what id ``k11000`` corresponds to in the second or third idmapping. The
 straightforward algorithm to use is to apply the inverse of the first idmapping,
 mapping ``k11000`` up to ``u1000``. Afterwards, we can map ``u1000`` down using
 either the second idmapping mapping or third idmapping mapping. The second
-idmapping would map ``u1000`` down to ``21000``. The third idmapping would map
-``u1000`` down to ``u31000``.
+idmapping would map ``u1000`` down to ``k21000``. The third idmapping would map
+``u1000`` down to ``k31000``.
 
 If we were given the same task for the following three idmappings::
 
diff --git a/Documentation/rust/quick-start.rst b/Documentation/rust/quick-start.rst
index 4aa50e5fcb8c0..6d2607870ba44 100644
--- a/Documentation/rust/quick-start.rst
+++ b/Documentation/rust/quick-start.rst
@@ -145,7 +145,7 @@ Rust standard library source
 ****************************
 
 The Rust standard library source is required because the build system will
-cross-compile ``core`` and ``alloc``.
+cross-compile ``core``.
 
 If ``rustup`` is being used, run::
 
diff --git a/Documentation/rust/testing.rst b/Documentation/rust/testing.rst
index 568b71b415a45..180b886e0f1ee 100644
--- a/Documentation/rust/testing.rst
+++ b/Documentation/rust/testing.rst
@@ -97,7 +97,7 @@ operator are also supported as usual, e.g.:
 
 	/// ```
 	/// # use kernel::{spawn_work_item, workqueue};
-	/// spawn_work_item!(workqueue::system(), || pr_info!("x"))?;
+	/// spawn_work_item!(workqueue::system(), || pr_info!("x\n"))?;
 	/// # Ok::<(), Error>(())
 	/// ```
 
diff --git a/Documentation/scheduler/sched-rt-group.rst b/Documentation/scheduler/sched-rt-group.rst
index 80b05a3009ea2..ab464335d3204 100644
--- a/Documentation/scheduler/sched-rt-group.rst
+++ b/Documentation/scheduler/sched-rt-group.rst
@@ -102,6 +102,9 @@ The system wide settings are configured under the /proc virtual file system:
   * sched_rt_period_us takes values from 1 to INT_MAX.
   * sched_rt_runtime_us takes values from -1 to sched_rt_period_us.
   * A run time of -1 specifies runtime == period, ie. no limit.
+  * sched_rt_runtime_us/sched_rt_period_us > 0.05 inorder to preserve
+    bandwidth for fair dl_server. For accurate value check average of
+    runtime/period in /sys/kernel/debug/sched/fair_server/cpuX/
 
 
 2.2 Default behaviour
diff --git a/Documentation/sound/soc/codec-to-codec.rst b/Documentation/sound/soc/codec-to-codec.rst
index 0418521b6e03f..973c147d9d824 100644
--- a/Documentation/sound/soc/codec-to-codec.rst
+++ b/Documentation/sound/soc/codec-to-codec.rst
@@ -68,7 +68,7 @@ file:
     .codec_dai_name = "codec-2-dai_name",
     .platform_name = "samsung-i2s.0",
     .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
-            | SND_SOC_DAIFMT_CBM_CFM,
+            | SND_SOC_DAIFMT_CBP_CFP,
     .ignore_suspend = 1,
     .c2c_params = &dsp_codec_params,
     .num_c2c_params = 1,
@@ -80,7 +80,7 @@ file:
     .codec_name = "codec-3,
     .codec_dai_name = "codec-3-dai_name",
     .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
-            | SND_SOC_DAIFMT_CBM_CFM,
+            | SND_SOC_DAIFMT_CBP_CFP,
     .ignore_suspend = 1,
     .c2c_params = &dsp_codec_params,
     .num_c2c_params = 1,
diff --git a/Documentation/sound/soc/dpcm.rst b/Documentation/sound/soc/dpcm.rst
index 02419a6f82132..7b6aeab3c207a 100644
--- a/Documentation/sound/soc/dpcm.rst
+++ b/Documentation/sound/soc/dpcm.rst
@@ -147,14 +147,16 @@ For the example above we have to define 4 FE DAI links and 6 BE DAI links. The
 FE DAI links are defined as follows :-
 ::
 
+ SND_SOC_DAILINK_DEFS(pcm0,
+	DAILINK_COMP_ARRAY(COMP_CPU("System Pin")),
+	DAILINK_COMP_ARRAY(COMP_DUMMY()),
+	DAILINK_COMP_ARRAY(COMP_PLATFORM("dsp-audio")));
+
   static struct snd_soc_dai_link machine_dais[] = {
 	{
 		.name = "PCM0 System",
 		.stream_name = "System Playback",
-		.cpu_dai_name = "System Pin",
-		.platform_name = "dsp-audio",
-		.codec_name = "snd-soc-dummy",
-		.codec_dai_name = "snd-soc-dummy-dai",
+		SND_SOC_DAILINK_REG(pcm0),
 		.dynamic = 1,
 		.trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
 	},
@@ -174,15 +176,16 @@ dynamic and will change depending on runtime config.
 The BE DAIs are configured as follows :-
 ::
 
+ SND_SOC_DAILINK_DEFS(headset,
+	DAILINK_COMP_ARRAY(COMP_CPU("ssp-dai.0")),
+	DAILINK_COMP_ARRAY(COMP_CODEC("rt5640.0-001c", "rt5640-aif1")));
+
   static struct snd_soc_dai_link machine_dais[] = {
 	.....< FE DAI links here >
 	{
 		.name = "Codec Headset",
-		.cpu_dai_name = "ssp-dai.0",
-		.platform_name = "snd-soc-dummy",
+		SND_SOC_DAILINK_REG(headset),
 		.no_pcm = 1,
-		.codec_name = "rt5640.0-001c",
-		.codec_dai_name = "rt5640-aif1",
 		.ignore_suspend = 1,
 		.ignore_pmdown_time = 1,
 		.be_hw_params_fixup = hswult_ssp0_fixup,
@@ -362,7 +365,7 @@ The machine driver sets some additional parameters to the DAI link i.e.
 		.codec_dai_name = "modem-aif1",
 		.codec_name = "modem",
 		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
-				| SND_SOC_DAIFMT_CBM_CFM,
+				| SND_SOC_DAIFMT_CBP_CFP,
 		.c2c_params = &dai_params,
 		.num_c2c_params = 1,
 	}