diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2025-06-06 11:50:47 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2025-06-06 11:50:47 -0700 |
| commit | c26f4fbd58375bd6ef74f95eb73d61762ad97c59 (patch) | |
| tree | 0bec60c3a022bfe531420265f1b489ee4aaa1eb1 /Documentation/devicetree | |
| parent | a100922a3855eb35ecd465f1d558546b1e144445 (diff) | |
| parent | 9857af0fcff385c75433f2162c30c62eb912ef6d (diff) | |
Merge tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / iio driver updates from Greg KH:
"Here is the big char/misc/iio and other small driver subsystem pull
request for 6.16-rc1.
Overall, a lot of individual changes, but nothing major, just the
normal constant forward progress of new device support and cleanups to
existing subsystems. Highlights in here are:
- Large IIO driver updates and additions and device tree changes
- Android binder bugfixes and logfile fixes
- mhi driver updates
- comedi driver updates
- counter driver updates and additions
- coresight driver updates and additions
- echo driver removal as there are no in-kernel users of it
- nvmem driver updates
- spmi driver updates
- new amd-sbi driver "subsystem" and drivers added
- rust miscdriver binding documentation fix
- other small driver fixes and updates (uio, w1, acrn, hpet,
xillybus, cardreader drivers, fastrpc and others)
All of these have been in linux-next for quite a while with no
reported problems"
* tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (390 commits)
binder: fix yet another UAF in binder_devices
counter: microchip-tcb-capture: Add watch validation support
dt-bindings: iio: adc: Add ROHM BD79100G
iio: adc: add support for Nuvoton NCT7201
dt-bindings: iio: adc: add NCT7201 ADCs
iio: chemical: Add driver for SEN0322
dt-bindings: trivial-devices: Document SEN0322
iio: adc: ad7768-1: reorganize driver headers
iio: bmp280: zero-init buffer
iio: ssp_sensors: optimalize -> optimize
HID: sensor-hub: Fix typo and improve documentation
iio: admv1013: replace redundant ternary operator with just len
iio: chemical: mhz19b: Fix error code in probe()
iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
iio: make IIO_DMA_MINALIGN minimum of 8 bytes
...
Diffstat (limited to 'Documentation/devicetree')
37 files changed, 748 insertions, 148 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml index a6f793ea03b6..0c1017affbad 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml @@ -30,6 +30,19 @@ properties: power-domains: maxItems: 1 + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + oneOf: + - items: + - enum: [apb_pclk, atclk] + - items: # Zynq-700 + - const: apb_pclk + - const: dbg_trc + - const: dbg_apb + in-ports: $ref: /schemas/graph.yaml#/properties/ports additionalProperties: false diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml index ff4f5c21c548..8dae89ecb64d 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml @@ -25,6 +25,7 @@ description: | * https://www.analog.com/en/products/ad7386-4.html * https://www.analog.com/en/products/ad7387-4.html * https://www.analog.com/en/products/ad7388-4.html + * https://www.analog.com/en/products/ad7389-4.html * https://www.analog.com/en/products/adaq4370-4.html * https://www.analog.com/en/products/adaq4380-4.html * https://www.analog.com/en/products/adaq4381-4.html @@ -49,6 +50,7 @@ properties: - adi,ad7386-4 - adi,ad7387-4 - adi,ad7388-4 + - adi,ad7389-4 - adi,adaq4370-4 - adi,adaq4380-4 - adi,adaq4381-4 @@ -213,6 +215,15 @@ allOf: properties: refin-supply: false + # adi,ad7389-4 is internal reference only + - if: + properties: + compatible: + const: adi,ad7389-4 + then: + properties: + refio-supply: false + # adaq devices need more supplies and using channel to declare gain property # only applies to adaq devices - if: diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml index 44c671eeda73..d0cb32f136e5 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml @@ -17,35 +17,40 @@ description: | properties: compatible: - enum: - - adi,ad7091 - - adi,ad7091r - - adi,ad7273 - - adi,ad7274 - - adi,ad7276 - - adi,ad7277 - - adi,ad7278 - - adi,ad7466 - - adi,ad7467 - - adi,ad7468 - - adi,ad7475 - - adi,ad7476 - - adi,ad7476a - - adi,ad7477 - - adi,ad7477a - - adi,ad7478 - - adi,ad7478a - - adi,ad7495 - - adi,ad7910 - - adi,ad7920 - - adi,ad7940 - - ti,adc081s - - ti,adc101s - - ti,adc121s - - ti,ads7866 - - ti,ads7867 - - ti,ads7868 - - lltc,ltc2314-14 + oneOf: + - items: + - enum: + - adi,ad7091 + - adi,ad7091r + - adi,ad7273 + - adi,ad7274 + - adi,ad7276 + - adi,ad7277 + - adi,ad7278 + - adi,ad7466 + - adi,ad7467 + - adi,ad7468 + - adi,ad7475 + - adi,ad7476 + - adi,ad7476a + - adi,ad7477 + - adi,ad7477a + - adi,ad7478 + - adi,ad7478a + - adi,ad7495 + - adi,ad7910 + - adi,ad7920 + - adi,ad7940 + - ti,adc081s + - ti,adc101s + - ti,adc121s + - ti,ads7866 + - ti,ads7867 + - ti,ads7868 + - lltc,ltc2314-14 + - items: + - const: rohm,bu79100g + - const: ti,ads7866 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index 52d3f1ce3367..29f12d650442 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -45,6 +45,14 @@ properties: "#size-cells": const: 0 + '#trigger-source-cells': + description: | + Cell indicates the output signal: 0 = BUSY, 1 = FIRSTDATA. + + For convenience, macros for these values are available in + dt-bindings/iio/adc/adi,ad7606.h. + const: 1 + # According to the datasheet, "Data is clocked in from SDI on the falling # edge of SCLK, while data is clocked out on DOUTA on the rising edge of # SCLK". Also, even if not stated textually in the datasheet, it is made diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml index b0962a4583ac..bb9825e7346d 100644 --- a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml @@ -23,6 +23,7 @@ properties: - amlogic,meson8m2-saradc - amlogic,meson-gxbb-saradc - amlogic,meson-gxl-saradc + - amlogic,meson-gxlx-saradc - amlogic,meson-gxm-saradc - amlogic,meson-axg-saradc - amlogic,meson-g12a-saradc diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml index 6168b44ea72c..b489c984c1bb 100644 --- a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml @@ -34,6 +34,7 @@ properties: - const: mediatek,mt2701-auxadc - items: - enum: + - mediatek,mt6893-auxadc - mediatek,mt8183-auxadc - mediatek,mt8186-auxadc - mediatek,mt8188-auxadc diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml index 06951ec5f5da..3a69ec60edb9 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -32,6 +32,9 @@ properties: spi-max-frequency: maximum: 20000000 + reset-gpios: + maxItems: 1 + clocks: description: | Phandle and clock identifier for external sampling clock. @@ -71,6 +74,7 @@ unevaluatedProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> spi { #address-cells = <1>; #size-cells = <0>; @@ -80,6 +84,7 @@ examples: reg = <0>; interrupt-parent = <&gpio5>; interrupts = <15 2>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; spi-max-frequency = <20000000>; microchip,device-addr = <0>; vref-supply = <&vref_reg>; diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,nct7201.yaml b/Documentation/devicetree/bindings/iio/adc/nuvoton,nct7201.yaml new file mode 100644 index 000000000000..8ce7d415d956 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,nct7201.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/nuvoton,nct7201.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton nct7201 and similar ADCs + +maintainers: + - Eason Yang <j2anfernee@gmail.com> + +description: | + The NCT7201/NCT7202 is a Nuvoton Hardware Monitor IC, contains up to 12 + voltage monitoring channels, with SMBus interface, and up to 4 sets SMBus + address selection by ADDR connection. It also provides ALERT# signal for + event notification and reset input RSTIN# to recover it from a fault + condition. + + NCT7201 contains 8 voltage monitor inputs (VIN1~VIN8). + NCT7202 contains 12 voltage monitor inputs (VIN1~VIN12). + +properties: + compatible: + enum: + - nuvoton,nct7201 + - nuvoton,nct7202 + + reg: + maxItems: 1 + + vdd-supply: + description: + A 3.3V to supply that powers the chip. + + vref-supply: + description: + The regulator supply for the ADC reference voltage. + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@1d { + compatible = "nuvoton,nct7202"; + reg = <0x1d>; + vdd-supply = <&vdd>; + vref-supply = <&vref>; + interrupt-parent = <&gpio3>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/rohm,bd79104.yaml b/Documentation/devicetree/bindings/iio/adc/rohm,bd79104.yaml new file mode 100644 index 000000000000..2a8ad4fdfc6b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/rohm,bd79104.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/rohm,bd79104.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM Semiconductor BD79104 ADC + +maintainers: + - Matti Vaittinen <mazziesaccount@gmail.com> + +description: | + 12 bit SPI ADC with 8 channels. + +properties: + compatible: + const: rohm,bd79104 + + reg: + maxItems: 1 + + vdd-supply: true + iovdd-supply: true + +# The component data-sheet says the frequency is 20M. I, however, found +# that the ROHM evaluation board BD79104FV-EVK-001 had problems with 20M. +# I have successfully used it with 4M. My _assumption_ is that this is not +# the limitation of the component itself, but a limitation of the EVK. + spi-max-frequency: + maximum: 20000000 + + "#io-channel-cells": + const: 1 + + spi-cpha: true + spi-cpol: true + +required: + - compatible + - reg + - vdd-supply + - iovdd-supply + - spi-cpha + - spi-cpol + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "rohm,bd79104"; + reg = <0>; + vdd-supply = <&vdd_supply>; + iovdd-supply = <&iovdd_supply>; + spi-max-frequency = <4000000>; + spi-cpha; + spi-cpol; + #io-channel-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/rohm,bd79124.yaml b/Documentation/devicetree/bindings/iio/adc/rohm,bd79124.yaml new file mode 100644 index 000000000000..503285823376 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/rohm,bd79124.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/rohm,bd79124.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD79124 ADC/GPO + +maintainers: + - Matti Vaittinen <mazziesaccount@gmail.com> + +description: | + The ROHM BD79124 is a 12-bit, 8-channel, SAR ADC. The ADC supports + an automatic measurement mode, with an alarm interrupt for out-of-window + measurements. ADC input pins can be also configured as general purpose + outputs. + +properties: + compatible: + const: rohm,bd79124 + + reg: + description: + I2C slave address. + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 1 + description: + The pin number. + + vdd-supply: true + + iovdd-supply: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^channel@[0-7]+$": + type: object + $ref: /schemas/iio/adc/adc.yaml# + description: Represents ADC channel. + + properties: + reg: + description: AIN pin number + minimum: 0 + maximum: 7 + + required: + - reg + + additionalProperties: false + +required: + - compatible + - reg + - iovdd-supply + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/leds/common.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + adc: adc@10 { + compatible = "rohm,bd79124"; + reg = <0x10>; + + interrupt-parent = <&gpio1>; + interrupts = <29 8>; + + vdd-supply = <&dummyreg>; + iovdd-supply = <&dummyreg>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + }; + channel@1 { + reg = <1>; + }; + channel@2 { + reg = <2>; + }; + channel@3 { + reg = <3>; + }; + channel@4 { + reg = <4>; + }; + channel@5 { + reg = <5>; + }; + channel@6 { + reg = <6>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml index ef9dcc365eab..17bb60e18a1c 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml @@ -498,7 +498,7 @@ patternProperties: examples: - | // Example 1: with stm32f429, ADC1, single-ended channel 8 - adc123: adc@40012000 { + adc123: adc@40012000 { compatible = "st,stm32f4-adc-core"; reg = <0x40012000 0x400>; interrupts = <18>; @@ -512,28 +512,28 @@ examples: #address-cells = <1>; #size-cells = <0>; adc@0 { - compatible = "st,stm32f4-adc"; - #io-channel-cells = <1>; - reg = <0x0>; - clocks = <&rcc 0 168>; - interrupt-parent = <&adc123>; - interrupts = <0>; - st,adc-channels = <8>; - dmas = <&dma2 0 0 0x400 0x0>; - dma-names = "rx"; - assigned-resolution-bits = <8>; + compatible = "st,stm32f4-adc"; + #io-channel-cells = <1>; + reg = <0x0>; + clocks = <&rcc 0 168>; + interrupt-parent = <&adc123>; + interrupts = <0>; + st,adc-channels = <8>; + dmas = <&dma2 0 0 0x400 0x0>; + dma-names = "rx"; + assigned-resolution-bits = <8>; }; // ... // other adc child nodes follow... - }; + }; - | // Example 2: with stm32mp157c to setup ADC1 with: // - channels 0 & 1 as single-ended // - channels 2 & 3 as differential (with resp. 6 & 7 negative inputs) - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/stm32mp1-clks.h> - adc12: adc@48003000 { + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + adc12: adc@48003000 { compatible = "st,stm32mp1-adc-core"; reg = <0x48003000 0x400>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, @@ -550,27 +550,27 @@ examples: #address-cells = <1>; #size-cells = <0>; adc@0 { - compatible = "st,stm32mp1-adc"; - #io-channel-cells = <1>; - reg = <0x0>; - interrupt-parent = <&adc12>; - interrupts = <0>; - st,adc-channels = <0 1>; - st,adc-diff-channels = <2 6>, <3 7>; - st,min-sample-time-nsecs = <5000>; - dmas = <&dmamux1 9 0x400 0x05>; - dma-names = "rx"; + compatible = "st,stm32mp1-adc"; + #io-channel-cells = <1>; + reg = <0x0>; + interrupt-parent = <&adc12>; + interrupts = <0>; + st,adc-channels = <0 1>; + st,adc-diff-channels = <2 6>, <3 7>; + st,min-sample-time-nsecs = <5000>; + dmas = <&dmamux1 9 0x400 0x05>; + dma-names = "rx"; }; // ... // other adc child node follow... - }; + }; - | // Example 3: with stm32mp157c to setup ADC2 with: // - internal channels 13, 14, 15. - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/stm32mp1-clks.h> - adc122: adc@48003000 { + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + adc122: adc@48003000 { compatible = "st,stm32mp1-adc-core"; reg = <0x48003000 0x400>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, @@ -587,28 +587,28 @@ examples: #address-cells = <1>; #size-cells = <0>; adc@100 { - compatible = "st,stm32mp1-adc"; - #io-channel-cells = <1>; - reg = <0x100>; - interrupts = <1>; - #address-cells = <1>; - #size-cells = <0>; - channel@13 { - reg = <13>; - label = "vrefint"; - st,min-sample-time-ns = <9000>; - }; - channel@14 { - reg = <14>; - label = "vddcore"; - st,min-sample-time-ns = <9000>; - }; - channel@15 { - reg = <15>; - label = "vbat"; - st,min-sample-time-ns = <9000>; - }; + compatible = "st,stm32mp1-adc"; + #io-channel-cells = <1>; + reg = <0x100>; + interrupts = <1>; + #address-cells = <1>; + #size-cells = <0>; + channel@13 { + reg = <13>; + label = "vrefint"; + st,min-sample-time-ns = <9000>; + }; + channel@14 { + reg = <14>; + label = "vddcore"; + st,min-sample-time-ns = <9000>; + }; + channel@15 { + reg = <15>; + label = "vbat"; + st,min-sample-time-ns = <9000>; + }; }; - }; + }; ... diff --git a/Documentation/devicetree/bindings/iio/chemical/winsen,mhz19b.yaml b/Documentation/devicetree/bindings/iio/chemical/winsen,mhz19b.yaml new file mode 100644 index 000000000000..2a6ddb33f163 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/winsen,mhz19b.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/winsen,mhz19b.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MHZ19B CO2 sensor + +maintainers: + - Gyeyoung Baek <gye976@gmail.com> + +properties: + compatible: + const: winsen,mhz19b + + vin-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - vin-supply + +additionalProperties: false + +examples: + - | + serial { + co2-sensor { + compatible = "winsen,mhz19b"; + vin-supply = <&vdd>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3530r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3530r.yaml new file mode 100644 index 000000000000..a355d52a9d64 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3530r.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,ad3530r.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD3530R and Similar DACs + +maintainers: + - Kim Seer Paller <kimseer.paller@analog.com> + +description: | + The AD3530/AD3530R (8-channel) and AD3531/AD3531R (4-channel) are low-power, + 16-bit, buffered voltage output digital-to-analog converters (DACs) with + software-programmable gain controls, providing full-scale output spans of 2.5V + or 5V for reference voltages of 2.5V. These devices operate from a single 2.7V + to 5.5V supply and are guaranteed monotonic by design. The "R" variants + include a 2.5V, 5ppm/°C internal reference, which is disabled by default. + Datasheet can be found here: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad3530_ad530r.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad3531-ad3531r.pdf + +properties: + compatible: + enum: + - adi,ad3530 + - adi,ad3530r + - adi,ad3531 + - adi,ad3531r + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 50000000 + + vdd-supply: + description: Power Supply Input. + + iovdd-supply: + description: Digital Power Supply Input. + + io-channels: + description: + ADC channel used to monitor internal die temperature, output voltages, and + current of a selected channel via the MUXOUT pin. + maxItems: 1 + + ref-supply: + description: + Reference Input/Output. The voltage at the REF pin sets the full-scale + range of all channels. If not provided the internal reference is used and + also provided on the VREF pin. + + reset-gpios: + description: + Active low signal that is falling edge sensitive. When it is deasserted, + the digital core initialization is performed and all DAC registers except + the Interface Configuration A register are reset to their default values. + maxItems: 1 + + ldac-gpios: + description: + LDAC pin to be used as a hardware trigger to update the DAC channels. If + not present, the DAC channels are updated by Software LDAC. + maxItems: 1 + + adi,range-double: + description: + Configure the output range for all channels. If the property is present, + the output will range from 0V to 2Vref. If the property is not present, + the output will range from 0V to Vref. + type: boolean + +required: + - compatible + - reg + - vdd-supply + - iovdd-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + dac@0 { + compatible = "adi,ad3530r"; + reg = <0>; + spi-max-frequency = <1000000>; + + vdd-supply = <&vdd>; + iovdd-supply = <&iovdd>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml index 2d2561a52683..547044b8e246 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml @@ -217,7 +217,7 @@ required: - reg - spi-max-frequency -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml index 5ee80bf6aa11..f994c1ef6d41 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml @@ -27,6 +27,8 @@ properties: vdrive-supply: true + vrefin-supply: true + reset-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml index 33490853497b..1aece3392b77 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml @@ -144,7 +144,7 @@ required: allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml index c8c434c10643..3c8e5781e42c 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml @@ -124,7 +124,7 @@ required: allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml index 0dc577c33918..26011b5639d8 100644 --- a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml +++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml @@ -64,7 +64,7 @@ required: - reg - vdd-supply -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/rohm,bd79703.yaml b/Documentation/devicetree/bindings/iio/dac/rohm,bd79703.yaml index 941a49c93943..c00fa50e42e8 100644 --- a/Documentation/devicetree/bindings/iio/dac/rohm,bd79703.yaml +++ b/Documentation/devicetree/bindings/iio/dac/rohm,bd79703.yaml @@ -5,19 +5,26 @@ $id: http://devicetree.org/schemas/iio/dac/rohm,bd79703.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: ROHM BD79703 DAC device driver +title: ROHM BD79700, BD79701, BD79702 and BD79703 DACs maintainers: - Matti Vaittinen <mazziesaccount@gmail.com> description: | - The ROHM BD79703 is a 6 channel, 8-bit DAC. - Datasheet can be found here: + The ROHM BD7970[0,1,2,3] are 8-bit DACs. The BD79700 has 2 channels, + BD79701 3 channels, BD79702 4 channels and BD79703 has 6 channels. + Datasheets for BD79702 and BD79703 can be found from https://fscdn.rohm.com/en/products/databook/datasheet/ic/data_converter/dac/bd79702fv-lb_bd79703fv-lb-e.pdf + and for the BD79700 and the BD79701 from + https://fscdn.rohm.com/en/products/databook/datasheet/ic/data_converter/dac/bd79700fvm-lb_bd79701fvm-lb-e.pdf properties: compatible: - const: rohm,bd79703 + enum: + - rohm,bd79700 + - rohm,bd79701 + - rohm,bd79702 + - rohm,bd79703 reg: maxItems: 1 @@ -27,23 +34,35 @@ properties: vfs-supply: description: - The regulator to use as a full scale voltage. The voltage should be between 2.7V .. VCC + The regulator to use as a full scale voltage. The voltage should be + between 2.7V .. VCC. Not present on BD79700 and BD79701. vcc-supply: description: - The regulator supplying the operating voltage. Should be between 2.7V ... 5.5V + The regulator supplying the operating voltage. Should be between + 2.7V ... 5.5V. Is used also as a Vfs on BD79700 and BD79701. required: - compatible - reg - spi-max-frequency - - vfs-supply - vcc-supply +if: + properties: + compatible: + contains: + enum: + - rohm,bd79702 + - rohm,bd79703 +then: + required: + - vfs-supply + allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml b/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml index b77e855bd594..ff0cb553e871 100644 --- a/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml +++ b/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml @@ -44,6 +44,24 @@ properties: '#clock-cells': const: 0 + adi,lpf-margin-mhz: + description: + Sets the minimum distance between the fundamental frequency of `rf_in` + and the corner frequency of the low-pass, output filter when operated in + 'auto' mode. The selected low-pass corner frequency will be greater than, + or equal to, `rf_in` + `lpf-margin-hz`. If not setting is found that + satisfies this relationship the filter will be put into 'bypass'. + default: 0 + + adi,hpf-margin-mhz: + description: + Sets the minimum distance between the fundamental frequency of `rf_in` + and the corner frequency of the high-pass, input filter when operated in + 'auto' mode. The selected high-pass corner frequency will be less than, + or equal to, `rf_in` - `hpf-margin-hz`. If not setting is found that + satisfies this relationship the filter will be put into 'bypass'. + default: 0 + required: - compatible - reg @@ -61,6 +79,8 @@ examples: spi-max-frequency = <10000000>; clocks = <&admv8818_rfin>; clock-names = "rf_in"; + adi,lpf-margin-mhz = <300>; + adi,hpf-margin-mhz = <300>; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml index a4c273c7a67f..cf5324de4fd6 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml @@ -53,7 +53,7 @@ required: allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml index 7e4492bbd027..d4d4e5c3d856 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml @@ -39,7 +39,16 @@ properties: maxItems: 1 interrupts: - maxItems: 1 + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + enum: + - INT1 + - INT2 drive-open-drain: type: boolean @@ -76,6 +85,7 @@ examples: reg = <0x68>; interrupt-parent = <&gpio2>; interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "INT1"; vdd-supply = <&vdd>; vddio-supply = <&vddio>; }; @@ -95,6 +105,7 @@ examples: spi-cpol; interrupt-parent = <&gpio1>; interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "INT1"; vdd-supply = <&vdd>; vddio-supply = <&vddio>; }; diff --git a/Documentation/devicetree/bindings/iio/light/bh1750.yaml b/Documentation/devicetree/bindings/iio/light/bh1750.yaml index 1a88b3c253d5..9df81c271411 100644 --- a/Documentation/devicetree/bindings/iio/light/bh1750.yaml +++ b/Documentation/devicetree/bindings/iio/light/bh1750.yaml @@ -24,6 +24,10 @@ properties: reg: maxItems: 1 + reset-gpios: + description: GPIO connected to the DVI reset pin (active low) + maxItems: 1 + required: - compatible - reg @@ -32,6 +36,7 @@ additionalProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> i2c { #address-cells = <1>; #size-cells = <0>; @@ -39,6 +44,7 @@ examples: light-sensor@23 { compatible = "rohm,bh1750"; reg = <0x23>; + reset-gpios = <&gpio2 17 GPIO_ACTIVE_LOW>; }; }; diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml index 89977b9f01cf..412c7bcc310f 100644 --- a/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml @@ -102,7 +102,7 @@ required: allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml -additionalProperties: false +unevaluatedProperties: false dependentSchemas: honeywell,pmin-pascal: diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml index 6994b30015bd..c756aa863103 100644 --- a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml @@ -115,7 +115,7 @@ allOf: honeywell,pmin-pascal: false honeywell,pmax-pascal: false -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml index 4b08be72bbd7..534644cccdcb 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml @@ -70,8 +70,8 @@ examples: reg = <0x00580000 0x14000>; #interconnect-cells = <1>; - snoc_mm: interconnect-snoc { - compatible = "qcom,msm8939-snoc-mm"; - #interconnect-cells = <1>; - }; + snoc_mm: interconnect-snoc { + compatible = "qcom,msm8939-snoc-mm"; + #interconnect-cells = <1>; + }; }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8953.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8953.yaml index 343ff62d7b65..56cdb77b369a 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8953.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8953.yaml @@ -84,17 +84,17 @@ additionalProperties: false examples: - | - #include <dt-bindings/clock/qcom,gcc-msm8953.h> + #include <dt-bindings/clock/qcom,gcc-msm8953.h> - snoc: interconnect@580000 { - compatible = "qcom,msm8953-snoc"; - reg = <0x580000 0x16080>; + interconnect@580000 { + compatible = "qcom,msm8953-snoc"; + reg = <0x580000 0x16080>; - #interconnect-cells = <2>; + #interconnect-cells = <2>; - snoc_mm: interconnect-snoc { - compatible = "qcom,msm8953-snoc-mm"; + interconnect-snoc { + compatible = "qcom,msm8953-snoc-mm"; - #interconnect-cells = <2>; - }; - }; + #interconnect-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml index 8004c4baf397..95ce25ce1f7d 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml @@ -50,13 +50,13 @@ additionalProperties: false examples: - | - #include <dt-bindings/clock/qcom,rpmcc.h> - - bimc: interconnect@fc380000 { - reg = <0xfc380000 0x6a000>; - compatible = "qcom,msm8974-bimc"; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_BIMC_CLK>, - <&rpmcc RPM_SMD_BIMC_A_CLK>; - }; + #include <dt-bindings/clock/qcom,rpmcc.h> + + interconnect@fc380000 { + reg = <0xfc380000 0x6a000>; + compatible = "qcom,msm8974-bimc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml index 4ac0863205b3..cd4bb912e0dc 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml @@ -28,6 +28,7 @@ properties: - const: qcom,osm-l3 - items: - enum: + - qcom,sa8775p-epss-l3 - qcom,sc7280-epss-l3 - qcom,sc8280xp-epss-l3 - qcom,sm6375-cpucp-l3 diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml index 5aaa92a7cef7..01d436d4a553 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml @@ -41,10 +41,10 @@ unevaluatedProperties: false examples: - | - #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/clock/qcom,rpmcc.h> - bimc: interconnect@400000 { - compatible = "qcom,msm8916-bimc"; - reg = <0x00400000 0x62000>; - #interconnect-cells = <1>; - }; + interconnect@400000 { + compatible = "qcom,msm8916-bimc"; + reg = <0x00400000 0x62000>; + #interconnect-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml index 1b9164dc162f..dad3ad2fd93b 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml @@ -127,19 +127,19 @@ unevaluatedProperties: false examples: - | - #include <dt-bindings/interconnect/qcom,sdm845.h> + #include <dt-bindings/interconnect/qcom,sdm845.h> - mem_noc: interconnect@1380000 { - compatible = "qcom,sdm845-mem-noc"; - reg = <0x01380000 0x27200>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; + interconnect@1380000 { + compatible = "qcom,sdm845-mem-noc"; + reg = <0x01380000 0x27200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; - mmss_noc: interconnect@1740000 { - compatible = "qcom,sdm845-mmss-noc"; - reg = <0x01740000 0x1c1000>; - #interconnect-cells = <1>; - qcom,bcm-voter-names = "apps", "disp"; - qcom,bcm-voters = <&apps_bcm_voter>, <&disp_bcm_voter>; - }; + interconnect@1740000 { + compatible = "qcom,sdm845-mmss-noc"; + reg = <0x01740000 0x1c1000>; + #interconnect-cells = <1>; + qcom,bcm-voter-names = "apps", "disp"; + qcom,bcm-voters = <&apps_bcm_voter>, <&disp_bcm_voter>; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdx75-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sdx75-rpmh.yaml index 71cf7e252bfc..4b5e9f9b07ec 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sdx75-rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sdx75-rpmh.yaml @@ -78,15 +78,15 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> clk_virt: interconnect-0 { - compatible = "qcom,sdx75-clk-virt"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - clocks = <&rpmhcc RPMH_QPIC_CLK>; + compatible = "qcom,sdx75-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&rpmhcc RPMH_QPIC_CLK>; }; system_noc: interconnect@1640000 { - compatible = "qcom,sdx75-system-noc"; - reg = <0x1640000 0x4b400>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; + compatible = "qcom,sdx75-system-noc"; + reg = <0x1640000 0x4b400>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; }; diff --git a/Documentation/devicetree/bindings/mux/gpio-mux.yaml b/Documentation/devicetree/bindings/mux/gpio-mux.yaml index b597c1f2c577..ef7e33ec85d4 100644 --- a/Documentation/devicetree/bindings/mux/gpio-mux.yaml +++ b/Documentation/devicetree/bindings/mux/gpio-mux.yaml @@ -25,6 +25,10 @@ properties: description: List of gpios used to control the multiplexer, least significant bit first. + mux-supply: + description: + Regulator to power on the multiplexer. + '#mux-control-cells': enum: [ 0, 1 ] diff --git a/Documentation/devicetree/bindings/nvmem/apple,spmi-nvmem.yaml b/Documentation/devicetree/bindings/nvmem/apple,spmi-nvmem.yaml new file mode 100644 index 000000000000..80b5a6cdcec9 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/apple,spmi-nvmem.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/apple,spmi-nvmem.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple SPMI NVMEM + +description: Exports a series of SPMI registers as NVMEM cells + +maintainers: + - Sasha Finkelstein <fnkl.kernel@gmail.com> + +allOf: + - $ref: nvmem.yaml# + +properties: + compatible: + items: + - enum: + - apple,maverick-pmic + - apple,sera-pmic + - apple,stowe-pmic + - const: apple,spmi-nvmem + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/spmi/spmi.h> + + pmic@f { + compatible = "apple,maverick-pmic", "apple,spmi-nvmem"; + reg = <0xf SPMI_USID>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + boot_stage: boot-stage@6001 { + reg = <0x6001 0x1>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/spmi/apple,spmi.yaml b/Documentation/devicetree/bindings/spmi/apple,spmi.yaml new file mode 100644 index 000000000000..16bd7eb2b7af --- /dev/null +++ b/Documentation/devicetree/bindings/spmi/apple,spmi.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spmi/apple,spmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple SPMI controller + +maintainers: + - Sasha Finkelstein <fnkl.kernel@gmail.com> + +description: A SPMI controller present on most Apple SoCs + +allOf: + - $ref: spmi.yaml# + +properties: + compatible: + items: + - enum: + - apple,t8103-spmi + - apple,t6000-spmi + - apple,t8112-spmi + - const: apple,spmi + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/spmi/spmi.h> + + spmi@920a1300 { + compatible = "apple,t6000-spmi", "apple,spmi"; + reg = <0x920a1300 0x100>; + #address-cells = <2>; + #size-cells = <0>; + + pmic@f { + reg = <0xf SPMI_USID>; + /* PMIC-specific properties */ + }; + }; diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 8dc81b1ca48e..27930708ccd5 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -85,6 +85,8 @@ properties: - devantech,srf08 # Devantech SRF10 ultrasonic ranger - devantech,srf10 + # DFRobot SEN0322 oxygen sensor + - dfrobot,sen0322 # DH electronics GmbH on-board CPLD trivial SPI device - dh,dhcom-board # DA9053: flexible system level PMIC with multicore support diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 65836e9bed6a..5d2a7a8d3ac6 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1705,6 +1705,8 @@ patternProperties: description: Wingtech Technology Co., Ltd. "^winlink,.*": description: WinLink Co., Ltd + "^winsen,.*": + description: Winsen Corp. "^winstar,.*": description: Winstar Display Corp. "^wirelesstag,.*": |